40 CFR 467.14 - New source performance standards.

View all text of Subpart A [§ 467.10 - § 467.17]

§ 467.14 - New source performance standards.

Any new source subject to this subpart must achieve the following performance standards. The mass of pollutants in the core and ancillary operations' process wastewater shall not exceed the following values:

Subpart A Core With an Annealing Furnace Scrubber

Pollutant or pollutant property	NSPS		Maximum for any 1 day	Maximum for monthly average		mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils		Chromium	0.030	0.0123	Cyanide	0.016	0.0065	Zinc	0.084	0.0343	Aluminum	0.499	0.221	Oil and grease	0.817	0.817	Suspended solids	1.225	0.980	pH	( 1)	( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart A Core Without an Annealing Furnace Scrubber

Pollutant or pollutant property	NSPS		Maximum for any 1 day	Maximum for monthly average		mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils		Chromium	0.021	0.0083	Cyanide	0.011	0.0044	Zinc	0.057	0.023	Aluminum	0.338	0.150	Oil and grease	0.553	0.553	Suspended solids	0.830	0.664	pH	( 1)	( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart A Continuous Sheet Casting Spent Lubricant

Pollutant or pollutant property	NSPS		Maximum for any 1 day	Maximum for monthly average		mg/off-kg (lb/million off-lbs) of aluminum cast		Chromium	0.00073	0.00029	Cyanide	0.00039	0.00016	Zinc	0.0020	0.00082	Aluminum	0.012	0.0053	Oil and grease	0.0197	0.019	Suspended solids	0.0295	0.022	pH	( 1)	( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart A Solution Heat Treatment Contact Cooling Water

Pollutant or pollutant property	NSPS		Maximum for any 1 day	Maximum for monthly average		mg/off-kg (lb/million off-lbs) of aluminum quenched		Chromium	0.76	0.31	Cyanide	0.41	0.17	Zinc	2.08	0.86	Aluminum	12.45	5.52	Oil and grease	20.37	20.37	Suspended solids	30.56	24.45	pH	( 1)	( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart A Cleaning or Etching Bath

Pollutant or pollutant property	NSPS		Maximum for any 1 day	Maximum for monthly average		mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched		Chromium	0.066	0.027	Cyanide	0.036	0.015	Zinc	0.183	0.075	Aluminum	1.094	0.485	Oil and grease	1.79	1.79	Suspended solids	2.69	2.15	pH	( 1)	( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart A Cleaning or Etching Rinse

Pollutant or pollutant property	NSPS		Maximum for any 1 day	Maximum for monthly average		mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched		Chromium	0.52	0.21	Cyanide	0.28	0.11	Zinc	1.42	0.59	Aluminum	8.50	3.70	Oil and grease	13.91	13.91	Suspended solids	20.87	16.69	pH	( 1)	( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart A Cleaning or Etching Scrubber Liquor

Pollutant or pollutant property	NSPS		Maximum for any 1 day	Maximum for monthly average		mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched		Chromium	0.715	0.29	Cyanide	0.387	0.16	Zinc	1.97	0.81	Aluminum	11.81	5.24	Oil and grease	19.33	19.33	Suspended solids	29.00	23.20	pH	( 1)	( 1)

1 Within the range of 7.0 to 10 at all times.

[48 FR 49149, Oct. 24, 1983; 49 FR 11631, 11632, Mar. 27, 1984]

AUTHORITY: Secs. 301, 304(b), (c), (e), and (g), 306(b) and (c), 307(b) and (c), 308 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) and the Water Quality Act of 1987 (the “Act”); 33 U.S.C. 1311, 1314(b), (c), (e), and (g), 1316(b) and (c), 1317(b) and (c), 1318 and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217; 101 Stat. 7, Pub. L. 100-4.

SOURCE: 48 FR 49149, Oct. 24, 1983, unless otherwise noted.

CITE AS: 40 CFR 467.14