1. Regulations
  2. title 40
  3. chapter I-i31
  4. part 467
  5. subpart A
  6. § 467.14

Collapse to view only § 467.14 - New source performance standards.

§ 467.10 - Applicability; description of the rolling with neat oils subcategory.

This subpart applies to discharges of pollutants to waters of the United States, and introductions of pollutants into publicly owned treatment works from the core and the ancillary operations of the rolling with neat oils subcategory.

AUTHORITY: Secs. 301, 304(b), (c), (e), and (g), 306(b) and (c), 307(b) and (c), 308 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) and the Water Quality Act of 1987 (the “Act”); 33 U.S.C. 1311, 1314(b), (c), (e), and (g), 1316(b) and (c), 1317(b) and (c), 1318 and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217; 101 Stat. 7, Pub. L. 100-4.

SOURCE: 48 FR 49149, Oct. 24, 1983, unless otherwise noted.

CITE AS: 40 CFR 467.10

§ 467.11 - Specialized definitions.

For the purpose of this subpart:

(a) The “core” of the rolling with neat oils subcategory shall include rolling using neat oils, roll grinding, sawing, annealing, stationary casting, homogenizing artificial aging, degreasing, and stamping.

(b) The term “ancillary operation” shall mean any operation not previously included in the core, performed on-site, following or preceding the rolling operation. The ancillary operations shall include continuous rod casting, continuous sheet casting, solution heat treatment, cleaning or etching.

AUTHORITY: Secs. 301, 304(b), (c), (e), and (g), 306(b) and (c), 307(b) and (c), 308 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) and the Water Quality Act of 1987 (the “Act”); 33 U.S.C. 1311, 1314(b), (c), (e), and (g), 1316(b) and (c), 1317(b) and (c), 1318 and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217; 101 Stat. 7, Pub. L. 100-4.

SOURCE: 48 FR 49149, Oct. 24, 1983, unless otherwise noted.

CITE AS: 40 CFR 467.11

§ 467.12 - Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.

Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations for the core operation and for the ancillary operations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available:

Subpart A Core With an Annealing Furnace Scrubber
Pollutant or pollutant property BPT effluent limitations Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils Chromium0.03600.0147 Cyanide0.02370.0098 Zinc0.1190.0498 Aluminum0.5250.257 Oil and grease1.6340.980 Suspended solids3.3481.593 pH( 1)( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart A Core Without an Annealing Furnace Scrubber
Pollutant or pollutant property BPT effluent limitations Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils Chromium0.02440.010 Cyanide0.01610.0067 Zinc0.08080.0338 Aluminum0.3560.174 Oil and grease1.110.664 Suspended solids2.271.079 pH( 1)( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart A Continuous Sheet Casting Spent Lubricant
Pollutant or pollutant property BPT effluent limitations Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum sheet cast by continuous methods Chromium0.000860.00035 Cyanide0.000570.00024 Zinc0.00290.0012 Aluminum0.01270.0063 Oil and grease0.03930.0236 Suspended solids0.08050.0383 pH( 1)( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart A Solution Heat Treatment Contact Cooling Water
Pollutant or pollutant property BPT effluent limitations Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum quenched Chromium3.391.39 Cyanide2.240.93 Zinc11.254.70 Aluminum49.5524.66 Oil and grease154.1092.46 Suspended solids315.91150.25 pH( 1)( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart A Cleaning or Etching Bath
Pollutant or pollutant property BPT effluent limitations Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium0.0790.032 Cyanide0.0520.022 Zinc0.2620.110 Aluminum1.150.573 Oil and grease3.582.15 Suspended solids7.343.49 pH( 1)( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart A Cleaning or Etching Rinse
Pollutant or pollutant property BPT effluent limitations Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium6.122.51 Cyanide4.041.67 Zinc20.318.49 Aluminum89.4644.52 Oil and grease278.24166.95 Suspended solids570.39271.29 pH( 1)( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart A Cleaning or Etching Scrubber Liquor
Pollutant or pollutant property BPT effluent limitations Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium7.002.86 Cyanide4.611.91 Zinc23.229.70 Aluminum102.2450.88 Oil and grease318.00190.80 Suspended solids651.90310.05 pH( 1)( 1)

1 Within the range of 7.0 to 10 at all times.

[48 FR 49149, Oct. 24, 1983; 49 FR 11631, 11632, Mar. 27, 1984]

AUTHORITY: Secs. 301, 304(b), (c), (e), and (g), 306(b) and (c), 307(b) and (c), 308 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) and the Water Quality Act of 1987 (the “Act”); 33 U.S.C. 1311, 1314(b), (c), (e), and (g), 1316(b) and (c), 1317(b) and (c), 1318 and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217; 101 Stat. 7, Pub. L. 100-4.

SOURCE: 48 FR 49149, Oct. 24, 1983, unless otherwise noted.

CITE AS: 40 CFR 467.12

§ 467.13 - Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.

Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. The mass of pollutants in the core and ancillary operations' process wastewater shall not exceed the following values:

Subpart A Core With an Annealing Furnace Scrubber
Pollutant or pollutant property BAT effluent limitations Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils Chromium0.0360.015 Cyanide0.0240.0098 Zinc0.1190.050 Aluminum0.5250.257
Subpart A Core Without an Annealing Furnace Scrubber
Pollutant or pollutant property BAT effluent limitations Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils Chromium0.0250.010 Cyanide0.0160.0067 Zinc0.0810.034 Aluminum0.3560.174
Subpart A Continuous Sheet Casting Spent Lubricant
Pollutant or pollutant property BAT effluent limitations Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum sheet cast Chromium0.000860.00035 Cyanide0.000570.00024 Zinc0.002870.0012 Aluminum0.01270.0062
Subpart A Solution Heat Treatment Contact Cooling Water
Pollutant or pollutant property BAT effluent limitations Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum quenched Chromium0.8970.367 Cyanide0.5910.245 Zinc2.9741.243 Aluminum13.106.518
Subpart A Cleaning or Etching Bath
Pollutant or pollutant property BAT effluent limitations Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium0.0790.032 Cyanide0.0520.022 Zinc0.2620.109 Aluminum1.1510.573
Subpart A Cleaning or Etching Rinse
Pollutant or pollutant property BAT effluent limitations Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium0.6120.251 Cyanide0.4040.167 Zinc2.0310.849 Aluminum8.9444.45
Subpart A Cleaning or Etching Scrubber Liquor
Pollutant or pollutant property BAT effluent limitations Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium0.8510.348 Cyanide0.5610.232 Zinc2.8221.179 Aluminum12.436.186
[48 FR 49149, Oct. 24, 1983; 49 FR 11631, 11632, Mar. 27, 1984]

AUTHORITY: Secs. 301, 304(b), (c), (e), and (g), 306(b) and (c), 307(b) and (c), 308 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) and the Water Quality Act of 1987 (the “Act”); 33 U.S.C. 1311, 1314(b), (c), (e), and (g), 1316(b) and (c), 1317(b) and (c), 1318 and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217; 101 Stat. 7, Pub. L. 100-4.

SOURCE: 48 FR 49149, Oct. 24, 1983, unless otherwise noted.

CITE AS: 40 CFR 467.13

§ 467.14 - New source performance standards.

Any new source subject to this subpart must achieve the following performance standards. The mass of pollutants in the core and ancillary operations' process wastewater shall not exceed the following values:

Subpart A Core With an Annealing Furnace Scrubber
Pollutant or pollutant property NSPS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils Chromium0.0300.0123 Cyanide0.0160.0065 Zinc0.0840.0343 Aluminum0.4990.221 Oil and grease0.8170.817 Suspended solids1.2250.980 pH( 1)( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart A Core Without an Annealing Furnace Scrubber
Pollutant or pollutant property NSPS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils Chromium0.0210.0083 Cyanide0.0110.0044 Zinc0.0570.023 Aluminum0.3380.150 Oil and grease0.5530.553 Suspended solids0.8300.664 pH( 1)( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart A Continuous Sheet Casting Spent Lubricant
Pollutant or pollutant property NSPS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cast Chromium0.000730.00029 Cyanide0.000390.00016 Zinc0.00200.00082 Aluminum0.0120.0053 Oil and grease0.01970.019 Suspended solids0.02950.022 pH( 1)( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart A Solution Heat Treatment Contact Cooling Water
Pollutant or pollutant property NSPS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum quenched Chromium0.760.31 Cyanide0.410.17 Zinc2.080.86 Aluminum12.455.52 Oil and grease20.3720.37 Suspended solids30.5624.45 pH( 1)( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart A Cleaning or Etching Bath
Pollutant or pollutant property NSPS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium0.0660.027 Cyanide0.0360.015 Zinc0.1830.075 Aluminum1.0940.485 Oil and grease1.791.79 Suspended solids2.692.15 pH( 1)( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart A Cleaning or Etching Rinse
Pollutant or pollutant property NSPS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium0.520.21 Cyanide0.280.11 Zinc1.420.59 Aluminum8.503.70 Oil and grease13.9113.91 Suspended solids20.8716.69 pH( 1)( 1)

1 Within the range of 7.0 to 10 at all times.

Subpart A Cleaning or Etching Scrubber Liquor
Pollutant or pollutant property NSPS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium0.7150.29 Cyanide0.3870.16 Zinc1.970.81 Aluminum11.815.24 Oil and grease19.3319.33 Suspended solids29.0023.20 pH( 1)( 1)

1 Within the range of 7.0 to 10 at all times.

[48 FR 49149, Oct. 24, 1983; 49 FR 11631, 11632, Mar. 27, 1984]

AUTHORITY: Secs. 301, 304(b), (c), (e), and (g), 306(b) and (c), 307(b) and (c), 308 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) and the Water Quality Act of 1987 (the “Act”); 33 U.S.C. 1311, 1314(b), (c), (e), and (g), 1316(b) and (c), 1317(b) and (c), 1318 and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217; 101 Stat. 7, Pub. L. 100-4.

SOURCE: 48 FR 49149, Oct. 24, 1983, unless otherwise noted.

CITE AS: 40 CFR 467.14

§ 467.15 - Pretreatment standards for existing sources.

Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for existing sources. The mass of wastewater pollutants in aluminum forming process wastewater introduced into a POTW shall not exceed the following values:

Subpart A Core With an Annealing Furnace Scrubber
Pollutant or pollutant property PSES Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils Chromium0.0360.015 Cyanide0.0240.010 Zinc0.1190.050 TTO0.057Oil and grease (alternate monitoring parameter)4.32.1
Subpart A Core Without an Annealing Furnace Scrubber
Pollutant or pollutant property PSES Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils Chromium0.0250.010 Cyanide0.0160.007 Zinc0.0810.034 TTO0.038Oil and grease (alternate monitoring parameter)2.91.5
Subpart A Continuous Sheet Casting Lubricant
Pollutant or pollutant property PSES Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cast Chromium0.000860.00035 Cyanide0.000570.00024 Zinc0.00290.0012 TTO0.0014Oil and grease (alternate monitoring parameter)0.100.052
Subpart A Solution Heat Treatment Contact Cooling Water
Pollutant or pollutant property PSES Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum quenched Chromium0.900.37 Cyanide0.590.25 Zinc2.981.25 TTO1.41Oil and grease (alternate monitoring parameter)11053
Subpart A Cleaning or Etching Bath
Pollutant or pollutant property PSES Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium0.0790.032 Cyanide0.0520.022 Zinc0.2620.109 TTO0.124Oil and grease (alternate monitoring parameter)9.34.7
Subpart A Cleaning or Etching Rinse
Pollutant or pollutant property PSES Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium0.610.25 Cyanide0.410.17 Zinc2.030.85 TTO0.96Oil and grease (alternate monitoring parameter)7336
Subpart A Cleaning or Etching Scrubber Liquor
Pollutant or pollutant property PSES Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium0.850.35 Cyanide0.560.23 Zinc2.821.18 TTO1.34Oil and grease (alternate monitoring parameter)10050
[48 FR 49149, Oct. 24, 1983; 49 FR 11631, 11632, Mar. 27, 1984, as amended at 53 FR 52369, 52370, Dec. 27, 1988]

AUTHORITY: Secs. 301, 304(b), (c), (e), and (g), 306(b) and (c), 307(b) and (c), 308 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) and the Water Quality Act of 1987 (the “Act”); 33 U.S.C. 1311, 1314(b), (c), (e), and (g), 1316(b) and (c), 1317(b) and (c), 1318 and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217; 101 Stat. 7, Pub. L. 100-4.

SOURCE: 48 FR 49149, Oct. 24, 1983, unless otherwise noted.

CITE AS: 40 CFR 467.15

§ 467.16 - Pretreatment standards for new sources.

Except as provided in 40 CFR 403.7, any new source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources. The mass of wastewater pollutants in aluminum forming process wastewater introduced into a POTW shall not exceed the following values:

Subpart A Core With an Annealing Furnace Scrubber
Pollutant or pollutant property PSNS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils Chromium0.0300.013 Cyanide0.0170.007 Zinc0.0840.035 TTO0.057Oil and grease (alternate monitoring parameter)0.8170.817
Subpart A Core Without an Annealing Furnace Scrubber
Pollutant or pollutant property PSNS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum rolled with neat oils Chromium0.0210.009 Cyanide0.0110.005 Zinc0.0570.024 TTO0.038Oil and grease (alternate monitoring parameter)0.540.54
Subpart A Continuous Sheet Casting Lubricant
Pollutant or pollutant property PSNS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cast Chromium0.000730.00029 Cyanide0.000390.00016 Zinc0.00200.00082 TTO0.0014Oil and grease (alternate monitoring parameter)0.0200.020
Subpart A Solution Heat Treatment Contact Cooling Water
Pollutant or pollutant property PSNS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum quenched Chromium0.760.31 Cyanide0.410.17 Zinc2.080.86 TTO1.41Oil and grease (alternate monitoring parameter)20.3720.37
Subpart A Cleaning or Etching Bath
Pollutant or pollutant property PSNS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium0.0670.027 Cyanide0.0360.015 Zinc0.1830.075 TTO0.124Oil and grease (alternate monitoring parameter)1.791.79
Subpart A Cleaning or Etching Rinse
Pollutant or pollutant property PSNS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium0.520.21 Cyanide0.280.11 Zinc1.420.59 TTO0.96Oil and grease (alternate monitoring parameter)13.9113.91
Subpart A Cleaning or Etching Scrubber Liquor
Pollutant or pollutant property PSNS Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium0.720.29 Cyanide0.390.16 Zinc1.970.81 TTO1.34Oil and grease (alternate monitoring parameter)19.3319.33
[48 FR 49149, Oct. 24, 1983; 49 FR 11631, 11632, Mar. 27, 1984]

AUTHORITY: Secs. 301, 304(b), (c), (e), and (g), 306(b) and (c), 307(b) and (c), 308 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) and the Water Quality Act of 1987 (the “Act”); 33 U.S.C. 1311, 1314(b), (c), (e), and (g), 1316(b) and (c), 1317(b) and (c), 1318 and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217; 101 Stat. 7, Pub. L. 100-4.

SOURCE: 48 FR 49149, Oct. 24, 1983, unless otherwise noted.

CITE AS: 40 CFR 467.16

§ 467.17 - Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. [Reserved]

AUTHORITY: Secs. 301, 304(b), (c), (e), and (g), 306(b) and (c), 307(b) and (c), 308 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) and the Water Quality Act of 1987 (the “Act”); 33 U.S.C. 1311, 1314(b), (c), (e), and (g), 1316(b) and (c), 1317(b) and (c), 1318 and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217; 101 Stat. 7, Pub. L. 100-4.

SOURCE: 48 FR 49149, Oct. 24, 1983, unless otherwise noted.

CITE AS: 40 CFR 467.17