View all text of Subpart 160.174 [§ 160.174-1 - § 160.174-25]
§ 160.174-3 - Incorporation by reference.
Certain material is incorporated by reference into this subpart with the approval of the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. All approved incorporation by reference (IBR) material is available for inspection at the Coast Guard Headquarters and at the National Archives and Records Administration (NARA). Contact the Coast Guard at: Commandant (CG-ENG-4), U.S. Coast Guard Stop 7509, 2703 Martin Luther King Jr. Avenue SE, Washington, DC 20593-7509; email [email protected] or visit www.dco.uscg.mil/CG-ENG-4/. For information on the availability of this material at NARA, email: [email protected], or go to: www.archives.gov/federal-register/cfr/ibr-locations.html. The material may be obtained from the sources in the following paragraphs of this section.
(a) ASTM International (ASTM). 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959; phone: +1 610 832 9500; email: [email protected]; web: www.astm.org.
(1) ASTM C177-85 (1993), Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (“ASTM C 177”); IBR approved for § 160.174-17(f) and (g).
(2) ASTM C518-91, Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus (“ASTM C 518”); IBR approved for § 160.174-17(f) and (g).
(3) ASTM D975-14, Standard Specification for Diesel Fuel Oils, approved February 1, 2014 (“ASTM D 975”); IBR approved for § 160.174-17(g).
(4) ASTM D1004-94a, Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting (“ASTM D 1004”); IBR approved for § 160.174-47(i).
(5) ASTM D1518-85 (1990), Standard Test Method for Thermal Transmittance of Textile Materials (“ASTM D 1518”); IBR approved for § 160.174-17(f).
(b) General Services Administration (GSA). email: [email protected]; web: https://fedspecs.gsa.gov/s/federal-specifications.
(1) Federal Standard No. 751a, Stitches, Seams, and Stitchings, dated January 25, 1965 (“Federal Standard No. 751”); IBR approved for § 160.174-9(b).
(2) [Reserved]
(c) National Institution of Standards and Technology (NIST) (formerly National Bureau of Standards). U.S. Department of Commerce, National Institution of Standards and Technology, 100 Bureau Drive, Gaithersburg, MD 20899; phone: (301) 975-2000; web: www.nist.gov.
(1) National Bureau of Standards Special Publication 440—Color, Universal Language and Dictionary of Names (“National Bureau of Standards Publication 440”); December 1976; IBR approved for § 160.174-9(f). (Available at https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nbsspecialpublication440.pdf)
(2) [Reserved]