46 CFR 110.10-1 - Incorporation by reference.

View all text of Subpart 110.10 [§ 110.10-1 - § 110.10-1]

§ 110.10-1 - Incorporation by reference.

Certain material is incorporated by reference into this subchapter with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. All approved incorporation by reference (IBR) material is available for inspection at the U.S. Coast Guard and at the National Archives and Records Administration (NARA). Contact U.S. Coast Guard at: U.S. Coast Guard, Office of Design and Engineering Standards (CG-ENG), 2703 Martin Luther King Jr Ave. SE, Stop 7418, Washington, DC 20593-7418, 202-372-1384, www.dco.uscg.mil/CG-ENG/. For information on the availability of this material at NARA, email: [email protected]; website: www.archives.gov/federal-register/cfr/ibr-locations.html. The material may be obtained from the following sources:

(a) American Bureau of Shipping (ABS), 1701 City Plaza Drive, Spring, TX 77389; 281-877-5800; [email protected]; ww2.eagle.org.

(1) Rules for Building and Classing Marine Vessels, January 2020 (“ABS Marine Vessel Rules”); IBR approved for §§ 110.15-1(b); 111.01-9(b); 111.12-3; 111.12-5; 111.12-7(a) and (b); 111.33-11; 111.35-1; 111.70-1(a); 111.105-31(o); 111.105-39 introductory text and (a); 111.105-40(a) and (c); 112.05-7(c);113.05-7(a); including:

(i) Part 1: Rules for Conditions of Classification;

(ii) Part 2: Rules for Materials and Welding;

(iii) Part 3: Rules for Building and Classing Marine Vessels Hull—Hull Construction and Equipment;

(iv) Part 4: Rules for Building and Classing Marine Vessels Vessel—Vessel Systems and Machinery;

(v) Part 5A & 5B: Rules for Building and Classing Marine Vessels—Specific Vessel Types; Common Structural Rules for Bulk Carriers and Oil Tankers;

(vi) Part 5C: Rules for Building and Classing Marine Vessels—Specific Vessel Types (Chapters 1-6 and 7-18);

(vii) Part 5C: Rules for Building and Classing Marine Vessels—Specific Vessel Types (Chapters 7-18);

(viii) Part 5D: Rules for Building and Classing Marine Vessels—Offshore Support Vessels for Specialized Services;

(ix) Part 6: Rules for Building and Classing Marine Vessels—Specialized Items and Systems; and

(x) Part 7: Rules for Survey after Construction.

(2) Rules for Building and Classing Mobile Offshore Units, Part 4 Machinery and Systems, January 2020 (“ABS MOU Rules”); IBR approved for §§ 111.12-1(a); 111.12-3; 111.12-5; 111.12-7(c); 111.33-11; 111.35-1; 111.70-1(a).

(b) American National Standards Institute (ANSI), 25 West 43rd Street, New York, NY 10036; 212-642-4900; [email protected]; www.ansi.org.

(1) ANSI/ISA-RP12.06.01-2003, Recommended Practice for Wiring Methods for Hazardous (Classified) Locations Instrumentation Part 1: Intrinsic Safety, approved April 16, 2003 (“ANSI RP12.06.01”); IBR approved for § 111.105-11(b).

(2) ANSI/ISA 12.12.01-2015, Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations, approved August 21, 2015 (“ANSI/ISA 12.12.01”); IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(c) American Petroleum Institute (API), 200 Massachusetts Avenue NW, Suite 1100. Washington, DC 20001-5571; 202-682-8000; [email protected]; www.api.org.

(1) API Recommended Practice 14F, Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Division 1 and Division 2 Locations, Sixth Edition, October 2018 (“API RP 14F”); IBR approved for § 111.105-17(b).

(2) API Recommended Practice 14FZ, Recommended Practice for Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1, and Zone 2 Locations, Second Edition, May 2013, (“API RP 14FZ”); IBR approved for § 111.105-17(b).

(3) API Recommended Practice 500, Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2, Third Edition, December 2012 with errata January 2014 (“API RP 500”); IBR approved for §§ 111.106-7(a) and 111.106-13(b).

(4) API Recommended Practice 505, Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2, Second Edition, August 2018 (“API RP 505”); IBR approved for §§ 111.106-7(a); 111.106-13(b).

(d) American Society of Mechanical Engineers (ASME), Two Park Avenue, New York, NY 10016-5990; 800-843-2763; [email protected]; www.asme.org.

(1) ASME A17.1-2016/CSA B44-16, Safety Code for Elevators and Escalators: Includes Requirements for Elevators, Escalators, Dumbwaiters, Moving Walks, Material Lifts, and Dumbwaiters with Automatic Transfer Devices, reissued January 16, 2017 with errata (“ASME A17.1”); IBR approved for § 111.91-1.

(2) [Reserved]

(e) ASTM International (ASTM), 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959; 610-832-9500; [email protected]; www.astm.org.

(1) ASTM B117-19, Standard Practice for Operating Salt Spray (Fog) Apparatus, approved November 1, 2019 (“ASTM B117”); IBR approved for § 110.15-1(b).

(2) ASTM F2876-10 (Reapproved 2015), Standard Practice for Thermal Rating and Installation of Internal Combustion Engine Packages for use in Hazardous Locations in Marine Applications, Reapproved May 1, 2015 (“ASTM F2876-10”); IBR approved for §§ 111.105-28; 111.106-3(h); 111.108-3(g).

(f) CSA Group, 178 Rexdale Blvd., Toronto, ON, Canada M9W 1R3; 800-463-6727; [email protected]; www.csagroup.org.

(1) CSA C22.2 No. 30-M1986 (Reaffirmed 2016), Explosion-proof enclosures for use in class I hazardous locations, Reaffirmed 2016 (“CSA C22.2 No. 30-M1986”), IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(2) CSA C22.2 No. 213-16, Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (classified) locations, May 2016 (“CSA C22.2 No. 213-16”); IBR approved for §§ 111.105-3(b); 111.106-3(b) and 111.108-3(b).

(3) CSA-C22.2 No. 0-10 (Reaffirmed 2015), General requirements—Canadian Electrical Code, Part II, including Update No. 2, dated November 2014, Reaffirmed 2015 (“CSA C22.2 No. 0-10”); IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(4) CAN/CSA-C22.2 No. 157-92 (Reaffirmed 2016)—Intrinsically safe and non-incendive equipment for use in hazardous locations, including Update No. 2, dated June 2003, Reaffirmed 2016 (“CSA C22.2 No. 157-92”); IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(g) DLA Document Services, Building 4/D, 700 Robbins Avenue, Philadelphia, PA 19111, 215-697-6396; [email protected]; https://quicksearch.dla.mil/qsSearch.aspx.

(1) MIL-DTL-76E, Military Specification Wire and Cable, Hookup, Electrical, Insulated, General Specification for, Nov. 3, 2016 (“MIL-DTL-76E”); IBR approved for § 111.60-11(c).

(2) MIL-DTL-24640C—Detail Specification Cables, Lightweight, Low Smoke, Electric, for Shipboard Use, General Specification for, (“MIL-DTL-24640C”), including:

(i) MIL-DTL-24640C, November 8, 2011; IBR approved for §§ 111.60-1(a); 111.106-5(a); and

(ii) MIL-DTL-24640C Supplement 1, November 8, 2011; IBR approved for §§ 111.60-1(a); 111.106-5(a).

(3) MIL-DTL-24643C, Detail Specification Cables, Electric, Low Smoke Halogen-Free, for Shipboard Use, General Specification for (“MIL-DTL-24643C”), including:

(i) MIL-DTL-24643C, October 1, 2009; IBR approved for §§ 111.60-1(a); 111.106-5(a); and

(ii) MIL-DTL-24643C with Supplement 1A, 13 December 2011; IBR approved for §§ 111.60-1(a); 111.106-5(a).

(h) European Committee for Standardization, CEN-CENELEC Management Centre, rue de la Sence 23, B-1040 Brussels, Belgium; + 32 2 550 08 1; [email protected]; www.cen.eu.

(1) EN 14744, Inland navigation vessels and sea-going vessels—Navigation light, English version, August 2005; IBR approved for § 111.75-17(d).

(2) [Reserved]

(i) FM Approvals, P.O. Box 9102, Norwood, MA 02062, 781-762-4300; https://www.fmglobal.com/report-contact-page/general-contact-form; https://www.fmapprovals.com.

(1) Class Number 3600, Approval Standard for Electrical Equipment for Use in Hazardous (Classified) Locations—General Requirements, January 2018 (“FM Approvals Class Number 3600”); IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(2) Class Number 3610, Approval Standard for Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III, Division 1, Hazardous (Classified) Locations, January 2018 (“FM Approvals Class Number 3610”); IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(3) Class Number 3611, Approval Standard for Nonincendive Electrical Equipment for Use in Class I and II, Division 2, and Class III, Divisions 1 and 2, Hazardous (Classified) Locations, January 2018 (“FM Approvals Class Number 3611”), IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(4) Class Number 3615, Approval Standard for Explosion-proof Electrical Equipment General Requirements, January 2018 (“FM Approvals Class Number 3615”); IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(5) Class Number 3620, Approval Standard for Purged and Pressurized Electrical Equipment for Hazardous (Classified) Locations, January 2018 (“FM Approvals Class Number 3620”); IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(j) Institute of Electrical and Electronic Engineers (IEEE), 3 Park Avenue, New York, NY 10016-5997; 800-701-4333; [email protected]; www.ieee.org.

(1) IEEE Std. C37.04-2018, IEEE Standard Rating for Ratings and Requirements for AC High-Voltage Circuit Breakers with Rated Maximum Voltage Above 1000 V, approved December 5, 2018 (“IEEE C37.04”); IBR approved for § 111.54-1(c).

(2) IEEE Std. C37.010-2016, IEEE Application Guide for AC High-Voltage Circuit Breakers >1000 Vac Rated on a Symmetrical Current Basis, approved September 22, 2016 (“IEEE C37.010”); IBR approved for § 111.54-1(c).

(3) IEEE Std. C37.12-2018, IEEE Guide for Specifications of High-Voltage Circuit Breakers (over 1000 V), approved December 5, 2018 (“IEEE C37.12”); IBR approved for § 111.54-1(c).

(4) IEEE Std. C37.13-2015, IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures, approved December 5, 2015 (“IEEE C37.13”); IBR approved for § 111.54-1(c).

(5) IEEE Std. C37.14-2015, IEEE Standard for DC (3200 V and below) Power Circuit Breakers Used in Enclosures, approved March 26, 2015 (“IEEE C37.14”); IBR approved for § 111.54-1(c).

(6) IEEE Std. C37.27-2015, IEEE Guide for Low-Voltage AC (635 V and below) Power Circuit Breakers Applied with Separately-Mounted Current-Limiting Fuses, approved December 5, 2015 (“IEEE C37.27”); IBR approved for § 111.54-1(c).

(7) IEEE Std. 45.1-2017 IEEE Recommended Practice for Electrical Installations on Shipboard—Design, approved March 23, 2017 (“IEEE 45.1-2017”); IBR approved for §§ 111.15-2(b); 111.40-1; 111.75-5(b); 111.105-41; and 113.65-5.

(8) IEEE Std. 45.2-2011, IEEE Recommended Practice for Electrical Installations on Shipboard—Controls and Automation, approved September 10, 2011 (“IEEE 45.2-2011”); IBR approved for §§ 111.33-3(a); 111.33-5(a).

(9) IEEE Std. 45.6-2016; IEEE Recommended Practice for Electrical Installations on Shipboard—Electrical Testing, approved December 7, 2016 (“IEEE 45.6-2016”); IBR approved for § 111.60-21.

(10) IEEE Std. 45.7-2012, IEEE Recommended Practice for Electrical Installations on Shipboard—AC Switchboards, approved March 29, 2012 (“IEEE 45.7-2012”); IBR approved for §§ 111.30-1; 111.30-5(a); 111.30-19(a).

(11) IEEE Std. 45.8-2016, IEEE Recommended Practice for Electrical Installations on Shipboard—Cable Systems, approved January 29, 2016 (“IEEE 45.8-2016”); IBR approved for §§ 111.05-7; 111.60-5(a); 111.60-13(a); 111.60-19(b).

(12) IEEE Std. 100, The Authoritative Dictionary of IEEE Standards Terms, Seventh Edition, published December 2000 (“IEEE 100”); IBR approved for § 110.15-1(a).

(13) IEEE Std. 1202-2006, IEEE Standard for Flame-Propagation Testing of Wire and Cable, (“IEEE 1202”), including:

(i) IEEE Std. 1202-2006 (R2012), reaffirmed December 5, 2012; IBR approved for §§ 111.60-6(a); 111.107-1(c); and

(ii) IEEE Std. 1202-2006/Cor 1-2012, Corrigendum 1 approved November 21, 2012; IBR approved for §§ 111.60-6(a); 111.107-1(c).

(15) IEEE Std. 1580-2010, IEEE Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating Facilities, approved September 30, 2010 (“IEEE 1580”); IBR approved for §§ 111.60-1(a); 111.60-2; 111.106-5(a).

(k) International Electrotechnical Commission (IEC), 3 Rue de Varembe, Geneva, Switzerland; +41 22 919 02 11; www.iec.ch; https://www.iec.ch/contact?id=40499.

(1) IEC 60068-2-52:2017, Environmental testing—Part 2-52: Tests—Test Kb: Salt mist, cyclic (sodium chloride solution), Edition 3.0, 2017-11; IBR approved for § 110.15-1(b).

(2) IEC 60079-1:2014, Explosive atmospheres—Part 1: Equipment protection by flameproof enclosures “d”, Edition 7.0, 2014-06; IBR approved for §§ 111.105-3(b); 106-3(b); 111.108-3(b).

(3) IEC 60079-2:2014, Explosive atmospheres—Part 2: Equipment protection by pressurized enclosures “p”, including:

(i) IEC 60079-2:2014, Edition 6.0, 2014-07, IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b); and

(ii) IEC 60079-2:2014/COR1:2015, with Corrigendum 1 (2015), Edition 6.0, 2014-07; IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(4) IEC 60079-5:2015, Explosive atmospheres—Part 5: Equipment protection by powder filling “q”, Edition 4.0, 2015-02, IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(5) IEC 60079-6:2015, Explosive atmospheres—Part 6: Equipment protection by liquid immersion “o”, Edition 4.0, 2015-02; IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(6) IEC 60079-7:2015+AMD1:2017 CSV (Consolidated Version), Explosive atmospheres—Part 7: Equipment protection by increased safety “e”, Edition 5.1, 2017-08, (“IEC 60079-7:2015”); IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(7) IEC 60079-11:2011, Explosive atmospheres—Part 11: Equipment protection by intrinsic safety “i” (“IEC 60079-11:2011”), including:

(i) IEC 60079-11:2011, Edition 6.0, 2011-06; IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b); and

(ii) IEC 60079-11:2011, Corrigendum 1 (January 2012), Edition 6.0, 2011-06; IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(8) IEC 60079-13:2017, Explosive atmospheres—Part 13: Equipment protection by pressurized room “p” and artificially ventilated room “v”, Edition 2.0, 2017-05; IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(9) IEC 60079-15:2017, Explosive atmospheres—Part 15: Equipment protection by type of protection “n”, Edition 5.0, 2017-12; IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(10) IEC 60079-18:2017 (Consolidated Version), Explosive atmospheres—Part 18: Equipment protection by encapsulation “m”, Edition 4.1, 2017-08, (“IEC 60079-18:2017”); IBR approved for §§ 111.105-3 (b)and (e); 111.106-3(b) and (d); 111.108-3(b) and (e).

(11) IEC 60079-25:2010, Explosive atmospheres—Part 25: Intrinsically safe electrical systems, Edition 2.0, 2010-02; IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(12) IEC 60079-30-1:2007, Part 30-1: Electrical resistance trace heating—General and testing requirements, First Edition, 2007-01; IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(13) IEC 60092-101:2018, Electrical installations in ships—Definitions and general requirements, Edition 5.0, 2018-10; IBR approved for §§ 110.15-1(a); 111.81-1(d).

(14) IEC 60092-201:2019, Electrical installations in ships—Part 201: System design—General, Edition 5.0, 2019-09; IBR approved for §§ 111.70-3(a); 111.81-1(d).

(15) IEC 60092-202:2016, Electrical installations in ships—Part 202: System design—Protection, Edition 5.0, 2016-09; IBR approved for §§ 111.12-7(b); 111.50-3(c), (e), and (g); 111.53-1(a); 111.54-1(a).

(16) IEC 60092-301:1980, Electrical installations in ships—Part 301: Equipment—Generators and motors, (“IEC 60092-301:1980”), including:

(17) IEC 60092-302:1997, Electrical Installation in ships—Part 302: Low-voltage switchgear and control gear assemblies, Fourth Edition, 1997-05; IBR approved for §§ 111.30-1; 111.30-5; 111.30-19(a).

(18) IEC 60092-303:1980, Electrical installations in ships—Part 303: Equipment—Transformers for power and lighting, (“IEC 60092-303:1980), including:

(19) IEC 60092-304:1980, Electrical installations in ships—Part 304: Equipment—Semiconductor convertors, (“IEC 60092-304:1980”), including:

(i) IEC 60092-304:1980, Third Edition, (1980-01); IBR approved for §§ 111.33-3(a); 111.33-5(b); and

(ii) IEC 60092-304:1980/AMD1:1995, Amendment 1, 1995-04; IBR approved for §§ 111.33-3(a); 111.33-5(b).

(20) IEC 60092-306:2009, Electrical installation in ships—Part 306: Equipment—Luminaires and lighting accessories, Edition 4.0, 2009-11; IBR approved for §§ 111.75-20(a) and (b); 111.81-1(d).

(21) IEC 60092-350:2014, Electrical installations in ships—Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications, Edition 4.0, 2014-08; IBR approved for §§ 111.60-1(a); 111.106-5(a).

(22) IEC 60092-352:2005, Electrical installation in ships—Part 352: Choice and Installation of electrical cables, Third Edition, 2005-09; IBR approved for §§ 111.60-1; 111.60-5(a) and (b); 111.81-1(d).

(23) IEC 60092-353:2016, Electrical installation in ships—Part 353: Power cables for rated voltages 1 kV and 3 kV, Edition 4.0, 2016-09; IBR approved for §§ 111.60-1(a); 111.60-5(a); 111.106-5(a).

(24) IEC 60092-354:2014, Electrical installations in ships—Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (Um=7,2 kV) up to 30 kV (Um=36 kV), Edition 3.0, 2014-08; IBR approved for § 111.60-1(a).

(25) IEC 60092-360:2014, Electrical installations in ships—Part 360: Insulating and sheathing materials for shipboard and offshore units, power, control, instrumentation and telecommunication cables, Edition 1.0, 2014-04; IBR approved for § 111.60-1(a).

(26) IEC 60092-376:2017, Electrical installations in ships—Part 376: Cables for control and instrumentation circuits 150/250 V (300 V), Third Edition, 2017-05; IBR approved for § 111.60-1(a).

(27) IEC 60092-401:1980, Electrical installations in ships—Part 401: Installation and test of completed installation, (“IEC 60092-401:1980”), including:

(i) IEC 60092-401:1980, Third Edition, 1980; IBR approved for §§ 111.05-9; 111.81-1(d);

(ii) IEC 60092-401:1980/AMD1:1987, Amendment 1, (1987-02), 1980; IBR approved for §§ 111.05-9; 111.81-1(d); and

(iii) IEC 60092-401:1980/AMD2:1997, Amendment 2 (1997-04), 1980; IBR approved for §§ 111.05-9; 111.81-1(d).

(28) IEC 60092-502:1999, Electrical installations in ships—Part 502: Tankers—Special features, Fifth Edition, 1999-02; IBR approved for §§ 111.81-1(d); 111.105-1, 111.105-3(b); 111.105-11(c); 111.105-17(b); 111.105-50(a), (b), and (c); 111.106-3(b); 111.106-5(c); 111.106-15(a); 111.108-3(b).

(29) IEC 60092-503:2007(E), Electrical installations in ships—Part 503: Special features—AC supply systems with voltages in the range of above 1kV up to and including 15 kV, Second Edition, 2007-06 (“IEC 60092-503:2007”); IBR approved for § 111.30-5(a).

(30) IEC 60331-11:1999+A1:2009, Tests for electric cables under fire conditions—Circuit integrity—Part 11: Apparatus—Fire alone at a flame temperature of at least 750 °C, Edition 1.1, 2009-07, (“IEC 60331-11:2009”); IBR approved for § 113.30-25(j).

(31) IEC 60331-21:1999, Tests for electric cables under fire conditions—Circuit integrity—Part 21: Procedures and requirements—Cables of rated voltage up to and including 0.6/1.0kV, First Edition, 1999-04; IBR approved for § 113.30-25(j).

(32) IEC 60332-1-1:2015 (Consolidated Version), Tests on electric and optical fibre cables under fire conditions—Part 1-1: Test for vertical flame propagation for a single insulated wire or cable—Apparatus, Edition 1.1, 2015-07; IBR approved for § 111.30-19(b).

(33) IEC 60332-1-2:2015 (Consolidated Version), Tests on electric and optical fibre cables under fire conditions—Part 1-2: Test for vertical flame propagation for a single insulated wire or cable—Procedure for 1kW pre-mixed flame, Edition 1.1, 2015-07, IBR approved for § 111.30-19(b).

(34) IEC 60332-3-21:2018, Tests on electric and optical fibre cables under fire conditions—Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables—Category A F/R, Edition 2.0, 2018-07; IBR approved for §§ 111.60-1(b); 111.60-2; 111.107-1(c).

(35) IEC 60332-3-22:2018, Tests on electric and optical fibre cables under fire conditions—Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables—Category A, Edition 2.0, 2018-07; IBR approved for §§ 111.60-1(b); 111.60-2; 111.60-6(a); 111.107-1(c).

(36) IEC 60529:2013 (Consolidated Version), Degrees of protection provided by enclosures (IP Code), Edition 2.2, 2013-08, (“IEC 60529:2013”); IBR approved for §§ 110.15-1(a); 111.01-9(a), (c), and (d); 113.10-7; 113.20-3; 113.25-11(a); 113.30-25(e) and (i); 113.37-10(b); 113.40-10(b); 113.50-5(g).

(37) IEC 60533:2015, Electrical and electronic installations in ships—Electromagnetic compatibility—Ships with a metallic hull, Edition 3.0, 2015-08; IBR approved for § 113.05-7(a).

(38) IEC 60947-2:2019 (Consolidated Version), Low-voltage switchgear and controlgear—Part 2: Circuit-breakers, Edition 5.1, 2019-07, (“IEC 60947-2:2019”); IBR approved for § 111.54-1(b) and (c).

(39) IEC 61363-1:1998, Electrical installations of ships and mobile and fixed offshore units—Part 1: Procedures for calculating short-circuit currents in three-phase a.c., First Edition, 1998-02; IBR approved for § 111.51-4(b).

(40) IEC 61439-6:2012, Low-voltage switchgear and control gear assemblies—Part 6: Busbar trunking systems (busways), Edition 1.0, 2012-05; IBR approved for § 111.59-1.

(41) IEC 61660-1:1997, Short-circuit currents in d.c. auxiliary installations in power plants and substations—Part 1: Calculation of short-circuit currents, (“IEC 61660-1:1997”), including:

(i) IEC 61660-1:1997, First Edition, 1997-06; IBR approved for § 111.51-4(b);

(ii) IEC 61660-1:1997/COR1:1999, Corrigendum 1 (March 1999), First Edition; IBR approved for § 111.51-4(b); and

(iii) IEC 61660-1:1997/COR2:2000, Corrigendum 2 (March 2000), First Edition; IBR approved for § 111.51-4(b).

(42) IEC 61892-7:2019, Mobile and fixed offshore units—Electrical installations—Part 7: Hazardous areas, Edition 4.0, 2019-04; IBR approved for §§ 111.105-1; 111.105-3(b); 111.105-17(b); 111.108-3(b).

(43) IEC 62271-100:2017 (Consolidated Version), High-voltage switchgear and controlgear—Part 100: Alternating-current circuit-breakers, Edition 2.2, 2017-06; IBR approved for § 111.54-1(c).

(44) IEC/TR 60092-370:2009, Technical Report—Electrical installations in ships—Part 370: Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables, Edition 1.0, 2009-07; IBR approved for § 111.60-1(a).

(45) IEC/IEEE 80005-1:2019, Utility connections in port—Part 1: High voltage shore connection (HVSC) systems—General requirements, Edition 2.0, 2019-03; IBR approved for § 111.83-7.

(l) International Maritime Organization (IMO Publications Section), 4 Albert Embankment, London SE1 7SR, United Kingdom; +44 (0) 20 7735 7611; [email protected]; www.imo.org.

(1) SOLAS Consolidated Edition 2014, Consolidated Text of the International Convention for the Safety of Life at Sea, 1974, and its Protocol of 1988: article, annexes and certificates, (Incorporating all amendments in effect from July 1, 2014), Sixth edition, 2014 (“IMO SOLAS 74”); IBR approved for §§ 111.99-5; 112.15-1(r); 113.25-6.

(2) IMO Resolution A.1023(26), Code for the Construction and Equipment of Mobile Offshore Drilling Units, 2009, January 18, 2010 (“2009 IMO MODU Code”); IBR approved for § 111.108-3(b).

(m) International Standards Organization (ISO), Chemin de Blandonnet 8, CP 401—1214 Vernier, Geneva, Switzerland; +41 22 749 01 11; [email protected]; www.iso.org.

(1) ISO 25861:2007(E), Ships and marine technology—Navigation—Daylight signalling lamps, First edition, December 1, 2007, (“ISO 25861”); IBR approved for § 111.75-18.

(2) [Reserved]

(n) Lloyd's Register, 71 Fenchurch Street, London EC3M 4BS, UK; +44-0-20-7709-9166; www.lr.org/en/type-approval-test-specifications.

(1) Lloyd's Register Type Approval System—Test Specification Number 1, March 2019; IBR approved for § 113.05-7(a).

(2) [Reserved]

(o) National Electrical Manufacturers Association (NEMA), 1300 North 17th Street, Suite 900, Arlington, VA 22209; 703-841-3200; [email protected]; www.nema.org.

(2) NEMA ICS 2.3-1995 (R2002, R2008), Instructions for the Handling, Installation, Operation, and Maintenance of Motor Control Centers Rated not More Than 600 Volts, copyright 2008 (“NEMA ICS 2.3”); IBR approved for § 111.70-3(a).

(4) NEMA 250-2018, Enclosures for Electrical Equipment (1000 Volts Maximum), 2018 (“NEMA 250”); IBR approved for §§ 110.15-1(b); 111.01-9(a), (b), (c), and (d); 113.10-7; 113.20-3; 113.25-11(a); 113.30-25(e) and (i); 113.37-10(b); 113.40-10(b); 113.50-5(g).

(5) ANSI/NEMA WC-70-2009, Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy, February 23, 2009, (“ANSI/NEMA WC-70”); IBR approved for § 111.60-13(a) and (c).

(p) National Fire Protection Association (NFPA), 1 Batterymarch Park, Quincy, MA 02169; 617-770-3000; [email protected]; www.nfpa.org.

(1) NFPA 70, National Electrical Code, 2017 Edition, ANSI-approved August 24, 2016 (“NFPA 70”), IBR approved for §§ 110.15-1; 111.05-33; 111.20-15; 111.50-3(c),(e), and (g); 111.50-7(a); 111.50-9; 111.53-1(a); 111.54-1(a); 111.55-1(a); 111.59-1; 111.60-7; 111.60-13(a)-(c); 111.60-23(d) and (f); 111.81-1(d); 111.105-1; 111.105-3(b); 111.105-11(a) and (c); 111.105-17(b); 111.106-3(b); 111.106-5(c); 111.107-1(b); 111.108-3(b).

(2) NFPA 77, Recommended Practice on Static Electricity, 2019 Edition, ANSI-approved May 24, 2018, (“NFPA 77”); IBR approved for § 111.105-27(b).

(3) NFPA 99, Health Care Facilities Code, 2018 Edition, ANSI-approved September 6, 2017, (“NFPA 99”); IBR approved for § 111.105-37.

(4) NFPA 496, Standard for Purged and Pressurized Enclosures for Electrical Equipment, 2017 Edition, ANSI-approved June 2, 2016 (“NFPA 496 (2017)”); IBR approved for §§ 111.105-3(d); 111.106-3(c); 111.108-3(d).

(q) UL, Comm 2000, 151 Eastern Avenue, Bensenville, IL 60106; (888) 853-3512; https://www.ul.com/customer-service; www.shopulstandards.com.

(1) UL 44, Standard for Safety Thermoset-Insulated Wire and Cable, Nineteenth Edition, January 9, 2018 (“ANSI/UL 44”); IBR approved for § 111.60-11(c).

(2) UL 50, Standard for Safety Enclosures for Electrical Equipment, Non-Environmental Considerations, Thirteenth Edition, October 16, 2015 (“UL 50”); IBR approved for § 111.81-1(d).

(3) UL 62, Standard for Safety Flexible Cords and Cables, Twentieth Edition, July 6, 2018, (“ANSI/UL 62”); IBR approved for § 111.60-13(a).

(4) UL 83, Standard for Safety Thermoplastic-Insulated Wires and Cables, Sixteenth Edition, July 28, 2017 (“ANSI/UL 83”); IBR approved for § 111.60-11(c).

(5) UL 484, Standard for Safety Room Air Conditioners, Ninth Edition, February 7, 2014, (“ANSI/UL 484”); IBR approved for § 111.87-3(a).

(6) UL 489, Standard for Safety Molded-Case Circuit Breakers, Molded-Case Switches and Circuit-Breaker Enclosures, Thirteenth Edition, October 24, 2016 (“ANSI/UL 489”); IBR approved for §§ 111.01-15(c); 111.54-1(b).

(7) UL 514A, Standard for Safety Metallic Outlet Boxes, Eleventh Edition, February 1, 2013, (“ANSI/UL 514A”); IBR approved for § 111.81-1(d).

(8) UL 514B, Standard for Safety Conduit, Tubing, and Cable Fittings, Sixth Edition, revised November 21, 2014, (“ANSI/UL 514B”); IBR approved for § 111.81-1(d).

(9) UL 514C, Standard for Safety Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers, Fourth Edition, revised December 10, 2014, (“ANSI/UL 514C”); IBR approved for § 111.81-1(d).

(10) UL 674, Standard for Safety Electric Motors and Generators for Use in Hazardous (Classified) Locations, Fifth Edition, May 31, 2011 (“ANSI/UL 674”); IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(11) UL 823, Electric Heaters for Use in Hazardous (Classified) Locations, Ninth Edition, revised November 15, 2007, (“ANSI/UL 823”); IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(12) UL 844, Standard for Safety Luminaires for Use in Hazardous (Classified) Locations, Thirteenth Edition, June 29, 2012, (“ANSI/UL 844”); IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(13) UL 913, Standard for Safety Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III, Division 1, Hazardous (Classified) Locations, Eighth Edition, 2013, (“ANSI/UL 913”); IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(14) UL 1042, Standard for Safety Electric Baseboard Heating Equipment, Fifth Edition, revised September 9, 2014, (“ANSI/UL 1042”); IBR approved for § 111.87-3(a).

(15) UL 1072, Standard for Safety Medium-Voltage Power Cables, Fourth Edition, revised June 19, 2013, (“ANSI/UL 1072”); IBR approved for § 111.60-1(a).

(16) UL 1104, Standard for Safety for Marine Navigation Lights, Second Edition, October 29, 1998 (“ANSI/UL 1104”); IBR approved for § 111.75-17(d).

(17) UL 1203—Standard for Safety: Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations, Fifth Edition, revised April 24, 2015, (“ANSI/UL 1203”); IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(18) UL 1309, Standard for Safety Marine Shipboard Cables, Third Edition, Apr. 21, 2017 (“ANSI/UL 1309”); IBR approved for §§ 111.60-1(a); 111.106-5(a).

(19) UL 1598, Standard for Safety Luminaires, Fourth Edition, August 28, 2018 (“ANSI/UL 1598”); IBR approved for § 111.75-20(b).

(20) UL 1598A, Standard for Safety Supplemental Requirements for Luminaires for Installation on Marine Vessels, First Edition (with revisions through April 17, 2015), December 4, 2000 (“ANSI/UL 1598A”); IBR approved for § 111.75-20(a) and (b).

(21) UL 2021, Standard for Safety Fixed and Location-Dedicated Electric Room Heaters, Fourth Edition, September 30, 2015 (“ANSI/UL 2021”); IBR approved for § 111.87-3(a).

(22) UL 2225, Standard for Safety Cables and Cable-Fittings for use in Hazardous (Classified) Locations, Fourth Edition, September 30, 2013 (“ANSI/UL 2225”); IBR approved for §§ 111.105-3(b); 111.106-3(b); 111.108-3(b).

(23) UL 2556, Standard for Safety Wire and Cable Test Methods, Fourth Edition, Dec. 15, 2015 (“ANSI/UL 2556”); IBR approved for §§ 111.30-19(b); 111.60-2; 111.60-6(a).

(24) UL 60079-18, Standard for Safety Explosive Atmospheres—Part 18: Equipment Protection by Encapsulation “m”, Fourth Edition, revised February 20, 2017, (“ANSI/UL 60079-18”); IBR approved for §§ 111.105-3(e); 111.106-3(d); 111.108-3(e). [USCG-2020-0075, 88 FR 16354, Mar. 16, 2023]