Part 56. PART 56—PIPING SYSTEMS AND APPURTENANCES

• SUBPART 56.01 [§ 56.01-1 - § 56.01-10] - Subpart 56.01—General
• SUBPART 56.04 [§ 56.04-1 - § 56.04-10] - Subpart 56.04—Piping Classification
• SUBPART 56.07 [§ 56.07-5 - § 56.07-10] - Subpart 56.07—Design
• SUBPART 56.10 [§ 56.10-1 - § 56.10-5] - Subpart 56.10—Components
• SUBPART 56.15 [§ 56.15-1 - § 56.15-10] - Subpart 56.15—Fittings
• SUBPART 56.20 [§ 56.20-1 - § 56.20-20] - Subpart 56.20—Valves
• SUBPART 56.25 [§ 56.25-5 - § 56.25-20] - Subpart 56.25—Pipe Flanges, Blanks, Flange Facings, Gaskets, and Bolting
• SUBPART 56.30 [§ 56.30-1 - § 56.30-40] - Subpart 56.30—Selection and Limitations of Piping Joints
• SUBPART 56.35 [§ 56.35-1 - § 56.35-15] - Subpart 56.35—Expansion, Flexibility and Supports
• SUBPART 56.50 [§ 56.50-1 - § 56.50-110] - Subpart 56.50—Design Requirements Pertaining to Specific Systems
• SUBPART 56.60 [§ 56.60-1 - § 56.60-25] - Subpart 56.60—Materials
• SUBPART 56.65 [§ 56.65-1 - § 56.65-1] - Subpart 56.65—Fabrication, Assembly, and Erection
• SUBPART 56.70 [§ 56.70-1 - § 56.70-20] - Subpart 56.70—Welding
• SUBPART 56.75 [§ 56.75-5 - § 56.75-30] - Subpart 56.75—Brazing
• SUBPART 56.80 [§ 56.80-5 - § 56.80-15] - Subpart 56.80—Bending and Forming
• SUBPART 56.85 [§ 56.85-5 - § 56.85-15] - Subpart 56.85—Heat Treatment of Welds
• SUBPART 56.90 [§ 56.90-1 - § 56.90-10] - Subpart 56.90—Assembly
• SUBPART 56.95 [§ 56.95-1 - § 56.95-10] - Subpart 56.95—Inspection
• SUBPART 56.97 [§ 56.97-1 - § 56.97-40] - Subpart 56.97—Pressure Tests