1. Regulations
  2. title 46
  3. chapter I-i1
  4. part 50
  5. subpart 50.25
  6. § 50.25-3

View all text of Subpart 50.25 [§ 50.25-1 - § 50.25-10]

§ 50.25-3 - Manufacturer or mill certification.

(a) A manufacturer or mill producing materials used in certain products for installation on inspected vessels, must issue a certificate or mill test report which must report the results of chemical analysis and mechanical properties required by the ASTM specification.

(b) This certificate must be made available to the marine inspector and Officer in Charge, Marine Inspection, upon request to the fabricator. (For exception refer to § 50.25-5(d).)

[CGFR 68-82, 33 FR 18808, Dec. 18, 1968, as amended by CGD 77-140, 54 FR 40598, Oct. 2, 1989; USCG-2020-0634, 89 FR 50094, June 12, 2024]

AUTHORITY: 43 U.S.C. 1333; 46 U.S.C. 3306, 3703; E.O. 12234, 45 FR 58801, 3 CFR, 1980 Comp., p. 277; Department of Homeland Security Delegation No. 00170.1, Revision No. 01.3; Section 50.01-20 also issued under the authority of 44 U.S.C. 3507.

SOURCE: CGFR 68-82, 33 FR 18808, Dec. 18, 1968, unless otherwise noted.

CITE AS: 46 CFR 50.25-3