- Table 1 to Subpart III of Part 62—Emission Limitations
| For the air pollutant | You must meet this emission limitation a | Using this averaging time | And determining compliance using this method | Cadmium | 0.004 milligrams per dry standard cubic meter | 3-run average (1 hour minimum sample time per run) | Performance test (Method 29 of appendix A of part 60). | Carbon monoxide | 157 parts per million by dry volume | 3-run average (1 hour minimum sample time per run) | Performance test (Method 10, 10A, or 10B, of appendix A of part 60). | Dioxins/furans (toxic equivalency basis) | 0.41 nanograms per dry standard cubic meter | 3-run average (4 hour minimum sample time per run) | Performance test (Method 23 of appendix A of part 60). | Hydrogen chloride | 62 parts per million by dry volume | 3-run average (1 hour minimum sample time per run) | Performance test (Method 26A of appendix A of part 60). | Lead | 0.04 milligrams per dry standard cubic meter | 3-run (1 hour minimum sample time per run) | Performance test (Method 29 of appendix A of part 60). | Mercury | 0.47 milligrams per dry standard cubic meter | 3-run average (1 hour minimum sample time per run) | Performance test (Method 29 of appendix A of part 60). | Opacity | 10 percent | 6-minute averages | Performance test (Method 9 of appendix A of part 60). | Oxides of nitrogen | 388 parts per million by dry volume | 3-run average (1 hour minimum sample time per run) | Performance test (Methods 7, 7A, 7C, 7D, or 7E of appendix A of part 60). | Particulate matter | 70 milligrams per dry standard cubic meter | 3-run average (1 hour minimum sample time per run) | Performance test (Method 5 or 29 of appendix A of part 60). | Sulfur dioxide | 20 parts per million by dry volume | 3-run average (1 hour minimum sample time per run) | Performance test (Method 6 or 6c of appendix A of part 60). |
|---|
a All emission limitations (except for opacity) are measured at 7 percent oxygen, dry basis at standard conditions.