1. Regulations
  2. title 40
  3. chapter I-i5
  4. part 53
  5. subpart F
  6. appendix-i 6

- Figure F-1 to Subpart F of Part 53—Designation Testing Checklist

DESIGNATION TESTING CHECKLIST FOR CLASS II

__________ __________ __________

Auditee Auditor signature Date

Compliance Status: Y = Yes N = No NA = Not applicable/Not available Verification Comments (Includes documentation of who, what, where, when, why) (Doc. #, Rev. #, Rev. Date) Verification Verified by Direct Observation of Process or of Documented Evidence: Performance, Design or Application Spec. Corresponding to Sections of 40 CFR Part 53, Subparts E and F Y N NA Subpart E: Performance Specification Tests Evaluation completed according to Subpart E § 53.50 to § 53.56Subpart E: Class I Sequential TestsClass II samplers that are also Class I (sequentialized) have passed the tests in § 53.57 Subpart F: Performance Spec/TestEvaluation of Physical Characteristics of Clean Sampler - One of these tests must be performed:
§ 53.62 - Full Wind Tunnel
§ 53.63 - Inlet Aspiration
§ 53.64 - Static Fractionator 		Evaluation of Physical Characteristics of Loaded Sampler
§ 53.65 Loading Test
One of the following tests must be performed for evaluation after loading: § 53.62, § 53.63, § 53.64 		Evaluation of the Volatile Characteristics of the Class II Sampler § 53.66

AUTHORITY: Sec. 301(a) of the Clean Air Act (42 U.S.C. sec. 1857g(a)), as amended by sec. 15(c)(2) of Pub. L. 91-604, 84 Stat. 1713, unless otherwise noted.

SOURCE: 40 FR 7049, Feb. 18, 1975, unless otherwise noted.