View all text of Subjgrp 51 [§ 1090.1550 - § 1090.1565]
§ 1090.1550 -
The following requirements apply for any nozzle installation used for dispensing gasoline into motor vehicles:
(a) Nozzles must meet the following hardware specifications:
(1) The outside diameter of the terminal end must not be greater than 21.3 mm.
(2) The terminal end must have a straight section of at least 63 mm.
(3) The retaining spring must terminate at least 76 mm from the terminal end.
(b) The dispensing flow rate must not exceed a maximum value of 10 gallons per minute. The flow rate may be controlled through any means in the pump/dispenser system, as long as it does not exceed the specified maximum value.