View all text of Subpart X [§ 421.260 - § 421.267]

§ 421.262 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.

Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable technology currently available:

(a) Furnace wet air pollution control.

BPT Limitations for the Secondary Precious Metals Subcategory

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/troy ounce of precious metals, including silver, incinerated or smelted Copper136.40071.800 Cyanide (total)20.8208.616 Zinc104.80043.800 Ammonia (as N)9,571.0004,207.000 Combined metals21.54Total suspended solids2,944.0001,400.000 pH( 1)( 1)

1 Within the range of 7.5 to 10.0 at all times.

(b) Raw material granulation.

BPT Limitations for the Secondary Precious Metals Subcategory

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/troy ounce of precious metal in the granulated raw material Copper12.0506.340 Cyanide (total)1.8390.761 Zinc9.2563.867 Ammonia (as N)845.100371.500 Combined metals1.902Total suspended solids259.900123.600 pH( 1)( 1)

1 Within the range of 7.5 to 10.0 at all times.

(c) Spent plating solutions.

BPT Limitations for the Secondary Precious Metals Subcategory

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/liter of spent plating solution used as a raw material Copper1.9001.000 Cyanide (total)0.2900.120 Zinc1.4600.610 Ammonia (as N)133.30058.600 Combined metals0.300Total suspended solids41.00019.500 pH( 1)( 1)

1 Within the range of 7.5 to 10.0 at all times.

(d) Spent cyanide stripping solutions.

BPT Limitations for the Secondary Precious Metals Subcategory

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/troy ounce of gold produced by cyanide stripping Copper7.0303.700 Cyanide (total)1.0730.444 Zinc5.4022.257 Ammonia (as N)493.200216.800 Combined metals1.110Total suspended solids151.70072.150 pH( 1)( 1)

1 Within the range of 7.5 to 10.0 at all times.

(e) Refinery wet air pollution control. 2

2 This allowance applies to either acid or alkaline wet air pollution control scrubbers. If both acid and alkaline wet air pollution control scrubbers are present in a particular facility the same allowance applies to each.

BPT Limitations for the Secondary Precious Metals Subcategory

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/troy ounce of precious metals, including silver, produced in refinery Copper39.90021.000 Cyanide (total)6.0902.520 Zinc30.66012.810 Ammonia (as N)2,799.0001,231.000 Combined metals6.300Total suspended solids861.000409.500 pH( 1)( 1)

1 Within the range of 7.5 to 10.0 at alltimes.

(f) Gold solvent extraction raffinate and wash water.

BPT Limitations for the Secondary Precious Metals Subcategory

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/troy ounce of gold produced by solvent extraction Copper1.1970.630 Cyanide (total)0.1830.076 Zinc0.9200.384 Ammonia (as N)83.98036.920 Combined metals0.189Total suspended solids25.83012.290 pH( 1)( 1)

1 Within the range of 7.5 to 10.0 at all times.

(g) Gold spent electrolyte.

BPT Limitations for the Secondary Precious Metals Subcategory

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/troy ounce of gold produced by electrolysis Copper0.0170.009 Cyanide (total)0.0030.001 Zinc0.1030.005 Ammonia (as N)1.1600.510 Combined metals0.003Total suspended solids0.3570.170 pH( 1)( 1)

1 Within the range of 7.5 to 10.0 at all times.

(h) Gold precipitation and filtration.

BPT Limitations for the Secondary Precious Metals Subcategory

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/troy ounce of gold precipitated Copper8.3604.400 Cyanide (total)1.2760.528 Zinc6.4242.684 Ammonia (as N)586.500257.800 Combined metals1.320Total suspended solids180.40085.800 pH( 1)( 1)

1 Within the range of 7.5 to 10.0 at all times.

(i) Platinum precipitation and filtration.

BPT Limitations for the Secondary Precious Metals Subcategory

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/troy ounce of platinum precipitated Copper9.8805.200 Cyanide (total)1.5080.624 Zinc7.5923.172 Ammonia (as N)693.200304.700 Combined metals1.560Total suspended solids213.200101.400 pH( 1)( 1)

1 Within the range of 7.5 to 10.0 at all times.

(j) Palladium precipitation and filtration.

BPT Limitations for the Secondary Precious Metals Subcategory

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/troy ounce of palladium precipitated Copper11.4006.000 Cyanide (total)1.7400.720 Zinc8.7603.660 Ammonia (as N)799.800351.600 Combined metals1.800Total suspended solids246.000117.000 pH( 1)( 1)

1 Within the range of 7.5 to 10.0 at all times.

(k) Other platinum group metals precipitation and filtration.

BPT Limitations for the Secondary Precious Metals Subcategory

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/troy ounce of other platinum group metals precipitated Copper9.8805.200 Cyanide (total)1.5080.624 Zinc7.5923.172 Ammonia (as N)693.200304.700 Combined metals1.560Total suspended solids213.200101.400 pH( 1)( 1)

1 Within the range of 7.5 to 10.0 at all times.

(l) Spent solution from PGC salt production.

BPT Limitations for the Secondary Precious Metals Subcategory

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/troy ounce of gold contained in PGC product Copper1.7100.900 Cyanide (total)0.2610.108 Zinc1.3140.549 Ammonia (as N)120.00052.740 Combined metals0.270Total suspended solids36.90017.550 pH( 1)( 1)

1 Within the range of 7.5 to 10.0 at all times.

(m) Equipment and floor wash.

BPT Limitations for the Secondary Precious Metals Subcategory

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/troy ounce of precious metals, including silver, produced in refinery Copper0.0000.000 Cyanide (total)0.0000.000 Zinc0.0000.000 Ammonia (as N)0.0000.000 Combined metals0.0000.000 Total suspended solids0.0000.000 pH( 1)( 1)

1 Within the range of 7.5 to 10.0 at all times.

(n) Preliminary treatment.

BPT Limitations for the Secondary Precious Metals Subcategory

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/troy ounce of total precious metals produced through this operation Copper95.00050.000 Cyanide (Total)14.5006.000 Zinc73.00030.500 Ammonia (as N)6665.0002930.000 Combined Metals15.000Total Suspended Solids2050.000975.000 pH( 1)( 1)

1 Within the range of 7.5 to 10.0 at all times.

[50 FR 38365, Sept. 20, 1985, as amended at 55 FR 31705, 31706, Aug. 3, 1990]