View all text of Subpart C [§ 421.30 - § 421.37]

§ 421.34 - Standards of performance for new sources.

Any new source subject to this subpart shall achieve the following new source performance standards:

(a) Subpart C—Scrap Drying Wet Air Pollution Control.

NSPS

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average. mg/kg (pounds per million pounds) of aluminum scrap dried Lead.000.000 Zinc.000.000 Aluminum.000.000 Ammonia (as N).000.000 Total suspended solids.000.000 Oil and grease.000.000 pH( 1)( 1)

1 Within the range of 7.0 to 10.0 at all times

(b) Subpart C—Scrap Screening and Milling.

NSPS

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of aluminum scrap screened and milled Lead.000.000 Zinc.000.000 Aluminum.000.000 Ammonia (as N).000.000 Total suspended solids.000.000 Oil and grease.000.000 pH( 1)( 1)

1 Within the range of 7.0 to 10.0 at all times.

(c) Subpart C—Dross Washing.

NSPS

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of dross washed Lead.000.000 Zinc.000.000 Aluminum.000.000 Ammonia (as N).000.000 Total suspended solids.000.000 Oil and grease.000.000 pH( 1)( 1)

1 Within the range of 7.0 to 10.0 at all times.

(d) Subpart C—Demagging Wet Air Pollution Control.

NSPS

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (lb/million lbs) of aluminum demagged Lead0.2160.100 Zinc0.7860.324 Aluminum4.7112.090 Ammonia (as N)102.80045.180 Total suspended solids11.5709.252 Oil and grease7.7107.710 pH( 1)( 1)

1 Within the range of 7.0 to 10.0 at all times.

(e) Subpart C—Delacquering Wet Air Pollution Control.

NSPS

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of aluminum delacquered Lead0.0930.043 Zinc0.3400.140 Aluminum2.0350.903 Ammonia (as N)44.38919.514 Total phenolics (4-AAP method) 10.004Total suspended solids4.9953.996 Oil and grease3.3303.330 pH( 2)( 2)

1 At the source.

2 Within the range of 7.0 to 10.0 at all times.

(f) Subpart C—Direct Chill Casting Contact Cooling.

NSPS

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of aluminum cast Lead.372.173 Zinc1.356.558 Aluminum8.1203.602 Ammonia (as N)177.20077.880 Total suspended solids19.94015.950 Oil and grease13.29013.290 pH( 1)( 1)

1 Within the range of 7.0 to 10.0 at all times.

(g) Subpart C—Ingot Conveyor Casting Contact Cooling (When Chlorine Demagging Wet Air Pollution Control is Not Practiced On-Site).

NSPS

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (lb/million lbs) of aluminum cast Lead0.0190.009 Zinc0.0680.028 Aluminum0.4090.182 Ammonia (as N)8.9313.926 Total suspended solids1.0050.804 Oil and grease0.6700.670 pH( 1)( 1)

1 Within the range of 7.0 to 10.0 at all times.

(h) Subpart C—Ingot Conveyor Casting Contact Cooling (When Chlorine Demagging Wet Air Pollution Control is Practiced On Site).

NSPS

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of aluminum cast Lead.000.000 Zinc.000.000 Aluminum.000.000 Ammonia (as N).000.000 Total suspended solids.000.000 Oil and grease.000.000 pH( 1)( 1)

1Within the range of 7.0 to 10.0 at all times.

(i) Subpart C—Stationary Casting Contact Cooling.

NSPS

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of aluminum cast Lead.000.000 Zinc.000.000 Aluminum.000.000 Ammonia (as N).000.000 Total suspended solids.000.000 Oil and grease.000.000 pH( 1)( 1)

1Within the range of 7.0 to 10.0 at all times.

(j) Subpart C—Shot Casting Contact Cooling.

NSPS

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of aluminum cast Lead.000.000 Zinc.000.000 Aluminum.000.000 Ammonia (as N).000.000 Total suspended solids.000.000 Oil and grease.000.000 pH( 1)( 1)

1 Within the range of 7.0 to 10.0 at all times.

[49 FR 8796, Mar. 8, 1984, as amended at 49 FR 29794, July 24, 1984; 52 FR 25559, July 7, 1987]