View all text of Subjgrp 117 [§ 63.7080 - § 63.7083]
§ 63.7083 - When do I have to comply with this subpart?
(a) If you have a new affected source, you must comply with this subpart according to paragraphs (a)(1) and (2) of this section.
(1) If you start up your affected source before January 5, 2004, you must comply with the PM emission limitations no later than January 5, 2004, and you must have completed all applicable performance tests no later than July 5, 2004, except as noted in paragraphs (g)(1) and (2) of this section.
(2) If you start up your affected source after January 5, 2004, then you must comply with the PM emission limitations for new affected sources upon startup of your affected source and you must have completed all applicable performance tests no later than 180 days after startup, except as noted in paragraphs (g)(1) and (2) of this section.
(b) If you have an existing affected source you must comply with the applicable PM emission limitations for the existing affected source, and you must have completed all applicable performance tests no later than January 5, 2007, except as noted in paragraphs (g)(1) and (2) of this section.
(c) If you start up your affected source after July 16, 2024, then you must comply with all emission limitations for new affected sources upon startup of your affected source and you must have completed all applicable performance tests no later than 180 days after startup, except as noted in paragraphs (h)(1) and (2) of this section.
(d) If you have an existing affected source you must comply with all applicable emission limitations for the existing affected source, and you must have completed all applicable performance tests no later than July 16, 2027, except as noted in paragraphs (h)(1) and (2) of this section.
(e) If you have an LMP that is an area source that increases its emissions or its potential to emit such that it becomes a major source of HAP, the deadlines specified in paragraphs (c)(1) and (2) of this section apply.
(1) New affected sources at your LMP you must be in compliance with this subpart upon startup.
(2) Existing affected sources at your LMP must be in compliance with this subpart within 3 years after your source becomes a major source of HAP.
(f) You must meet the notification requirements in § 63.7130 according to the schedule in § 63.7130 and in subpart A of this part. Some of the notifications must be submitted before you are required to comply with the emission limitations in this subpart.
(g)(1) If your affected source commenced construction or reconstruction on or before September, 16, 2019, then the compliance date for the revised requirements promulgated at §§ 63.7090, 63.7100, 63.7112, 63.7113, 63.7121, 63.7130, 63.7131, 63.7132, 63.7140, 63.7141, 63.7142, and 63.7143 and Tables 2, 3, 4, 5, 7, 8 and 9 (except changes to the cross references to 63.6(f)(1) and (h)(1)) of 40 CFR 63, subpart AAAAA, published on July 24, 2020 is January 20, 2021.
(2) If your affected source commenced construction or reconstruction after September 16, 2019, then the compliance date for the revised requirements promulgated at §§ 63.7090, 63.7100, 63.7112, 63.7113, 63.7121, 63.7130, 63.7131, 63.7132, 63.7140, 63.7141, 63.7142, and 63.7143 and Tables 2, 3, 4, 5, 7, 8 and 9 to this subpart, published on July 24, 2020 is July 24, 2020 or the date of initial startup, whichever is later.
(h)(1) If your affected source commenced construction or reconstruction on or before January 5, 2023, then the compliance date for HCl, mercury, total organic HAP, and D/F emissions limitations is July 16, 2027.
(2) If your affected source commenced construction or reconstruction after July 16, 2024, then the compliance date for HCl, mercury, total organic HAP, and D/F emissions limitations is July 16, 2024, or the date of initial startup, whichever is later.