- Table 15 to Subpart XXXX of Part 63—Emission Limits for Rubber Processing Affected Sources
As stated in § 63.6009(a), you must comply with the emission limits for each new, reconstructed, or existing rubber processing affected source in the following table:
| For each . . . | You must meet the following emission limits | 1. Existing rubber processing affected sources | a. THC emissions, measured as propane must not exceed 64 grams/Mg mixed rubber compound processed, based on a 15-day rolling average.
b. fPM emissions must not exceed 3.0 grams/Mg mixed rubber compound processed, or metal HAP emissions must not exceed 0.051 grams/Mg mixed rubber compound processed. | 2. New or reconstructed rubber processing affected sources | a. THC emissions, measured as propane must not exceed 64 grams/Mg mixed rubber compound processed, based on a 15-day rolling average.
b. fPM emissions must not exceed 3.0 grams/Mg mixed rubber compound processed, or metal HAP emissions must not exceed 0.051 grams/Mg mixed rubber compound processed. |
|---|