The references contained in this appendix provide information that can be helpful in understanding and complying with the requirements contained in Subpart V of this part. The national consensus standards referenced in this appendix contain detailed specifications that employers may follow in complying with the more performance-based requirements of Subpart V of this part. Except as specifically noted in Subpart V of this part, however, the Occupational Safety and Health Administration will not necessarily deem compliance with the national consensus standards to be compliance with the provisions of Subpart V of this part.

ANSI/SIA A92.2-2009, American National Standard for Vehicle-Mounted Elevating and Rotating Aerial Devices. ANSI Z133-2012, American National Standard Safety Requirements for Arboricultural Operations—Pruning, Trimming, Repairing, Maintaining, and Removing Trees, and Cutting Brush. ANSI/IEEE Std 935-1989, IEEE Guide on Terminology for Tools and Equipment to Be Used in Live Line Working. ASME B20.1-2012, Safety Standard for Conveyors and Related Equipment. ASTM D120-09, Standard Specification for Rubber Insulating Gloves. ASTM D149-09 (2013), Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies. ASTM D178-01 (2010), Standard Specification for Rubber Insulating Matting. ASTM D1048-12, Standard Specification for Rubber Insulating Blankets. ASTM D1049-98 (2010), Standard Specification for Rubber Insulating Covers. ASTM D1050-05 (2011), Standard Specification for Rubber Insulating Line Hose. ASTM D1051-08, Standard Specification for Rubber Insulating Sleeves. ASTM F478-09, Standard Specification for In-Service Care of Insulating Line Hose and Covers. ASTM F479-06 (2011), Standard Specification for In-Service Care of Insulating Blankets. ASTM F496-08, Standard Specification for In-Service Care of Insulating Gloves and Sleeves. ASTM F711-02 (2007), Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools. ASTM F712-06 (2011), Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers. ASTM F819-10, Standard Terminology Relating to Electrical Protective Equipment for Workers. ASTM F855-09, Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment. ASTM F887-12 e1, Standard Specifications for Personal Climbing Equipment. ASTM F914/F914M-10, Standard Test Method for Acoustic Emission for Aerial Personnel Devices Without Supplemental Load Handling Attachments. ASTM F1116-03 (2008), Standard Test Method for Determining Dielectric Strength of Dielectric Footwear. ASTM F1117-03 (2008), Standard Specification for Dielectric Footwear. ASTM F1236-96 (2012), Standard Guide for Visual Inspection of Electrical Protective Rubber Products. ASTM F1430/F1430M-10, Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments. ASTM F1505-10, Standard Specification for Insulated and Insulating Hand Tools. ASTM F1506-10a, Standard Performance Specification for Flame Resistant and Arc Rated Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards. ASTM F1564-13, Standard Specification for Structure-Mounted Insulating Work Platforms for Electrical Workers. ASTM F1701-12, Standard Specification for Unused Polypropylene Rope with Special Electrical Properties. ASTM F1742-03 (2011), Standard Specification for PVC Insulating Sheeting. ASTM F1796-09, Standard Specification for High Voltage Detectors—Part 1 Capacitive Type to be Used for Voltages Exceeding 600 Volts AC. ASTM F1797-09 ε 1, Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Digger Derricks. ASTM F1825-03 (2007), Standard Specification for Clampstick Type Live Line Tools. ASTM F1826-00 (2011), Standard Specification for Live Line and Measuring Telescoping Tools. ASTM F1891-12, Standard Specification for Arc and Flame Resistant Rainwear. ASTM F1958/F1958M-12, Standard Test Method for Determining the Ignitability of Non-flame-Resistant Materials for Clothing by Electric Arc Exposure Method Using Mannequins. ASTM F1959/F1959M-12, Standard Test Method for Determining the Arc Rating of Materials for Clothing. IEEE Stds 4-1995, 4a-2001 (Amendment to IEEE Standard Techniques for High-Voltage Testing), IEEE Standard Techniques for High-Voltage Testing. IEEE Std 62-1995, IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus—Part 1: Oil Filled Power Transformers, Regulators, and Reactors. IEEE Std 80-2000, Guide for Safety in AC Substation Grounding. IEEE Std 100-2000, The Authoritative Dictionary of IEEE Standards Terms Seventh Edition. IEEE Std 516-2009, IEEE Guide for Maintenance Methods on Energized Power Lines. IEEE Std 524-2003, IEEE Guide to the Installation of Overhead Transmission Line Conductors. IEEE Std 957-2005, IEEE Guide for Cleaning Insulators. IEEE Std 1048-2003, IEEE Guide for Protective Grounding of Power Lines. IEEE Std 1067-2005, IEEE Guide for In-Service Use, Care, Maintenance, and Testing of Conductive Clothing for Use on Voltages up to 765 kV AC and ±750 kV DC. IEEE Std 1307-2004, IEEE Standard for Fall Protection for Utility Work. IEEE Stds 1584-2002, 1584a-2004 (Amendment 1 to IEEE Std 1584-2002), and 1584b-2011 (Amendment 2: Changes to Clause 4 of IEEE Std 1584-2002), IEEE Guide for Performing Arc-Flash Hazard Calculations. IEEE C2-2012, National Electrical Safety Code. NFPA 70E-2012, Standard for Electrical Safety in the Workplace.