Subpart A. Subpart A—The Standard

• § 1209.1 - Scope and application.
• § 1209.2 - Definitions and measurements.
• § 1209.3 - General requirements.
• § 1209.4 - Test procedures for determining settled density.
• § 1209.5 - Test procedures for corrosiveness.
• § 1209.6 - Test procedures for critical radiant flux.
• § 1209.7 - Test procedures for smoldering combustion.
• § 1209.8 - Procedure for calibration of radiation instrumentation.
• § 1209.9 - Labeling requirement.
• § 1209.10 - Certification and enforcement.
• § 1209.11 - Effective date.

• APPENDIX

  • Figure 1 to Subpart A of Part 1209—Partial Insulation Preparation Apparatus
  • Figure 2 to Subpart A of Part 1209—Cyclone Receiver Weldment
  • Figure 3 to Subpart A of Part 1209—Flooring Radiant Tester Schematic Side Elevation
  • Figure 4 to Subpart A of Part 1209—Flooring Radiant Panel Tester Schematic Low Flux End, Elevation
  • Figure 5 to Subpart A of Part 1209—Zero Reference Point Related to Detecting Plane
  • Figure 6 to Subpart A of Part 1209—Dummy Specimen in Specimen Holder
  • Figure 7 to Subpart A of Part 1209—Specimen Tray
  • Figure 8 to Subpart A of Part 1209—Standard Radiant Heat Energy Flux Profile
  • Figure 9 to Subpart A of Part 1209—Flux Profile Data Log Format
  • Figure 10 to Subpart A of Part 1209—Insulation Radiant Panel Test Data Log Format