42 USC 7671 - Relationship to other laws

Collapse to view only § 7671m. Relationship to other laws

§ 7671. Definitions
§ 7671a. Listing of class I and class II substances
§ 7671b. Monitoring and reporting requirements
§ 7671c. Phase-out of production and consumption of class I substances
§ 7671d. Phase-out of production and consumption of class II substances
§ 7671e. Accelerated schedule
§ 7671f. Exchange authority
§ 7671g. National recycling and emission reduction program
§ 7671h. Servicing of motor vehicle air conditioners
§ 7671i. Nonessential products containing chlorofluorocarbons
§ 7671j. Labeling
§ 7671k. Safe alternatives policy
§ 7671l. Federal procurement
§ 7671m. Relationship to other laws
§ 7671n. Authority of Administrator
§ 7671o. Transfers among Parties to Montreal Protocol
§ 7671p. International cooperation
§ 7671q. Miscellaneous provisions

§ 7671. DefinitionsAs used in this subchapter—

(1) Appliance

(2) Baseline yearThe term “baseline year” means—

(A) the calendar year 1986, in the case of any class I substance listed in Group I or II under section 7671a(a) of this title,

(B) the calendar year 1989, in the case of any class I substance listed in Group III, IV, or V under section 7671a(a) of this title, and

(i) any substance added to the list of class I substances after the publication of the initial list under section 7671a(a) of this title, and

(ii) any class II substance.

(3) Class I substance

(4) Class II substance

(5) Commissioner

(6) Consumption

(7) Import

(8) Medical deviceThe term “medical device” means any device (as defined in the Federal Food, Drug, and Cosmetic Act (21 U.S.C. 321)), diagnostic product, drug (as defined in the Federal Food, Drug, and Cosmetic Act), and drug delivery system—

(A) if such device, product, drug, or drug delivery system utilizes a class I or class II substance for which no safe and effective alternative has been developed, and where necessary, approved by the Commissioner; and

(B) if such device, product, drug, or drug delivery system, has, after notice and opportunity for public comment, been approved and determined to be essential by the Commissioner in consultation with the Administrator.

(9) Montreal Protocol

(10) Ozone-depletion potential

(11) Produce, produced, and productionThe terms “produce”, “produced”, and “production”, refer to the manufacture of a substance from any raw material or feedstock chemical, but such terms do not include—

(A) the manufacture of a substance that is used and entirely consumed (except for trace quantities) in the manufacture of other chemicals, or

(B) the reuse or recycling of a substance.

(July 14, 1955, ch. 360, title VI, § 601, as added Pub. L. 101–549, title VI, § 602(a), Nov. 15, 1990, 104 Stat. 2649.)

§ 7671a. Listing of class I and class II substances

(a) List of class I substances

The initial list under this subsection shall also include the isomers of the substances listed above, other than 1,1,2-trichloroethane (an isomer of methyl chloroform). Pursuant to subsection (c), the Administrator shall add to the list of class I substances any other substance that the Administrator finds causes or contributes significantly to harmful effects on the stratospheric ozone layer. The Administrator shall, pursuant to subsection (c), add to such list all substances that the Administrator determines have an ozone depletion potential of 0.2 or greater.

(b) List of class II substances

(1) The Administrator may add, by rule, in accordance with the criteria set forth in subsection (a) or (b), as the case may be, any substance to the list of class I or class II substances under subsection (a) or (b). For purposes of exchanges under section 7661f 1

1 So in original. Probably should be section “7671f”.

of this title, whenever a substance is added to the list of class I substances the Administrator shall, to the extent consistent with the Montreal Protocol, assign such substance to existing Group I, II, III, IV, or V or place such substance in a new Group.

(2) Periodically, but not less frequently than every 3 years after November 15, 1990, the Administrator shall list, by rule, as additional class I or class II substances those substances which the Administrator finds meet the criteria of subsection (a) or (b), as the case may be.

(3) At any time, any person may petition the Administrator to add a substance to the list of class I or class II substances. Pursuant to the criteria set forth in subsection (a) or (b) as the case may be, within 180 days after receiving such a petition, the Administrator shall either propose to add the substance to such list or publish an explanation of the petition denial. In any case where the Administrator proposes to add a substance to such list, the Administrator shall add, by rule, (or make a final determination not to add) such substance to such list within 1 year after receiving such petition. Any petition under this paragraph shall include a showing by the petitioner that there are data on the substance adequate to support the petition. If the Administrator determines that information on the substance is not sufficient to make a determination under this paragraph, the Administrator shall use any authority available to the Administrator, under any law administered by the Administrator, to acquire such information.

(4) Only a class II substance which is added to the list of class I substances may be removed from the list of class II substances. No substance referred to in subsection (a), including methyl chloroform, may be removed from the list of class I substances.

(d) New listed substances

(e) Ozone-depletion and global warming potential

(July 14, 1955, ch. 360, title VI, § 602, as added Pub. L. 101–549, title VI, § 602(a), Nov. 15, 1990, 104 Stat. 2650.)

§ 7671b. Monitoring and reporting requirements

(a) Regulations

(b) Production, import, and export level reports

(d) Monitoring and reports to Congress

(1) The Administrator shall monitor and, not less often than every 3 years following November 15, 1990, submit a report to Congress on the production, use and consumption of class I and class II substances. Such report shall include data on domestic production, use and consumption, and an estimate of worldwide production, use and consumption of such substances. Not less frequently than every 6 years the Administrator shall report to Congress on the environmental and economic effects of any stratospheric ozone depletion.

(2) The Administrators of the National Aeronautics and Space Administration and the National Oceanic and Atmospheric Administration shall monitor, and not less often than every 3 years following November 15, 1990, submit a report to Congress on the current average tropospheric concentration of chlorine and bromine and on the level of stratospheric ozone depletion. Such reports shall include updated projections of—

(A) peak chlorine loading;

(B) the rate at which the atmospheric abundance of chlorine is projected to decrease after the year 2000; and

Such updated projections shall be made on the basis of current international and domestic controls on substances covered by this subchapter as well as on the basis of such controls supplemented by a year 2000 global phase out of all halocarbon emissions (the base case). It is the purpose of the Congress through the provisions of this section to monitor closely the production and consumption of class II substances to assure that the production and consumption of such substances will not:

(i) increase significantly the peak chlorine loading that is projected to occur under the base case established for purposes of this section;

(ii) reduce significantly the rate at which the atmospheric abundance of chlorine is projected to decrease under the base case; or

(iii) delay the date by which the average atmospheric concentration of chlorine is projected under the base case to return to a level of two parts per billion.

(e) Technology status report in 2015

(f) Emergency report

(July 14, 1955, ch. 360, title VI, § 603, as added Pub. L. 101–549, title VI, § 602(a), Nov. 15, 1990, 104 Stat. 2653.)

§ 7671c. Phase-out of production and consumption of class I substances

(a) Production phase-out

(b) Termination of production of class I substances

(d) Exceptions for essential uses of methyl chloroform, medical devices, and aviation safety

(1) Essential uses of methyl chloroform

(2) Medical devices

(3) Aviation safety

(A) Notwithstanding the termination of production required by subsection (b), the Administrator, after notice and opportunity for public comment, may, to the extent such action is consistent with the Montreal Protocol, authorize the production of limited quantities of halon-1211 (bromochlorodifluoromethane), halon-1301 (bromotrifluoromethane), and halon-2402 (dibromotetrafluoroethane) solely for purposes of aviation safety if the Administrator of the Federal Aviation Administration, in consultation with the Administrator, determines that no safe and effective substitute has been developed and that such authorization is necessary for aviation safety purposes.

(B) The Administrator of the Federal Aviation Administration shall, in consultation with the Administrator, examine whether safe and effective substitutes for methyl chloroform or alternative techniques will be available for nondestructive testing for metal fatigue and corrosion of existing airplane engines and airplane parts susceptible to metal fatigue and whether an exception for such uses of methyl chloroform under this paragraph will be necessary for purposes of airline safety after January 1, 2005 and provide a report to Congress in 1998.

(4) Cap on certain exceptions

(5) Sanitation and food protection

(6) Critical uses

(e) Developing countries

(1) Exception

(2) Cap on exception

(A) Under no circumstances may the authority set forth in paragraph (1) be applied to authorize any person to produce a class I substance in any year for which a production percentage is specified in Table 2 of subsection (a) in an annual quantity greater than the specified percentage, plus an amount equal to 10 percent of the amount produced by such person in the baseline year.

(B) Under no circumstances may the authority set forth in paragraph (1) be applied to authorize any person to produce a class I substance in the applicable termination year referred to in subsection (b), or in any year thereafter, in an annual quantity greater than 15 percent of the baseline quantity of such substance produced by such person.

(C) An exception authorized under this subsection shall terminate no later than January 1, 2010 (2012 in the case of methyl chloroform).

(3) Methyl bromide

(f) National security

(g) Fire suppression and explosion prevention

(1) Notwithstanding the production phase-out set forth in subsection (a), the Administrator, after notice and opportunity for public comment, may, to the extent such action is consistent with the Montreal Protocol, authorize the production of limited quantities of halon-1211, halon-1301, and halon-2402 in excess of the amount otherwise permitted pursuant to the schedule under subsection (a) solely for purposes of fire suppression or explosion prevention if the Administrator, in consultation with the Administrator of the United States Fire Administration, determines that no safe and effective substitute has been developed and that such authorization is necessary for fire suppression or explosion prevention purposes. The Administrator shall not authorize production under this paragraph for purposes of fire safety or explosion prevention training or testing of fire suppression or explosion prevention equipment. In no event shall the Administrator grant an exception under this paragraph that permits production after December 31, 1999.

(2) The Administrator shall periodically monitor and assess the status of efforts to obtain substitutes for the substances referred to in paragraph (1) for purposes of fire suppression or explosion prevention and the probability of such substitutes being available by December 31, 1999. The Administrator, as part of such assessment, shall consider any relevant assessments under the Montreal Protocol and the actions of the Parties pursuant to Article 2B of the Montreal Protocol in identifying essential uses and in permitting a level of production or consumption that is necessary to satisfy such uses for which no adequate alternatives are available after

(3) Notwithstanding the termination of production set forth in subsection (b), the Administrator, after notice and opportunity for public comment, may, to the extent consistent with the Montreal Protocol, authorize the production of limited quantities of halon-1211, halon-1301, and halon-2402 in the period after December 31, 1999, and before December 31, 2004, solely for purposes of fire suppression or explosion prevention in association with domestic production of crude oil and natural gas energy supplies on the North Slope of Alaska, if the Administrator, in consultation with the Administrator of the United States Fire Administration, determines that no safe and effective substitute has been developed and that such authorization is necessary for fire suppression and explosion prevention purposes. The Administrator shall not authorize production under the paragraph for purposes of fire safety or explosion prevention training or testing of fire suppression or explosion prevention equipment. In no event shall the Administrator authorize under this paragraph any person to produce any such halon in an amount greater than 3 percent of that produced by such person during the baseline year.

(h) Methyl bromide

(July 14, 1955, ch. 360, title VI, § 604, as added Pub. L. 101–549, title VI, § 602(a), Nov. 15, 1990, 104 Stat. 2655; amended Pub. L. 105–277, div. A, § 101(a) [title VII, § 764], Oct. 21, 1998, 112 Stat. 2681, 2681–36.)

§ 7671d. Phase-out of production and consumption of class II substances

(a) Restriction of use of class II substances

Effective January 1, 2015, it shall be unlawful for any person to introduce into interstate commerce or use any class II substance unless such substance—

(1) has been used, recovered, and recycled;

(2) is used and entirely consumed (except for trace quantities) in the production of other chemicals;

(3) is used as a refrigerant in appliances manufactured prior to January 1, 2020; or

(4) is listed as acceptable for use as a fire suppression agent for nonresidential applications in accordance with section 7671k(c) of this title.

As used in this subsection, the term “refrigerant” means any class II substance used for heat transfer in a refrigerating system.

(b) Production phase-out

(1) Effective January 1, 2015, it shall be unlawful for any person to produce any class II substance in an annual quantity greater than the quantity of such substance produced by such person during the baseline year.

(2) Effective January 1, 2030, it shall be unlawful for any person to produce any class II substance.

(d) Exceptions

(1) Medical devices

(A) In general

(B) Cap on exception

(2) Developing countries

(A) In general

(B) Cap on exception

(i) Under no circumstances may the authority set forth in subparagraph (A) be applied to authorize any person to produce a class II substance in any year following the effective date of subsection (b)(1) and before the year 2030 in annual quantities greater than 110 percent of the quantity of such substance produced by such person during the baseline year.

(ii) Under no circumstances may the authority set forth in subparagraph (A) be applied to authorize any person to produce a class II substance in the year 2030, or any year thereafter, in an annual quantity greater than 15 percent of the quantity of such substance produced by such person during the baseline year.

(iii) Each exception authorized under this paragraph shall terminate no later than January 1, 2040.

(July 14, 1955, ch. 360, title VI, § 605, as added Pub. L. 101–549, title VI, § 602(a), Nov. 15, 1990, 104 Stat. 2658; amended Pub. L. 112–81, div. A, title III, § 320, Dec. 31, 2011, 125 Stat. 1361.)

§ 7671e. Accelerated schedule

(a) In general

The Administrator shall promulgate regulations, after notice and opportunity for public comment, which establish a schedule for phasing out the production and consumption of class I and class II substances (or use of class II substances) that is more stringent than set forth in section 7671c or 7671d of this title, or both, if—

(1) based on an assessment of credible current scientific information (including any assessment under the Montreal Protocol) regarding harmful effects on the stratospheric ozone layer associated with a class I or class II substance, the Administrator determines that such more stringent schedule may be necessary to protect human health and the environment against such effects,

(2) based on the availability of substitutes for listed substances, the Administrator determines that such more stringent schedule is practicable, taking into account technological achievability, safety, and other relevant factors, or

(3) the Montreal Protocol is modified to include a schedule to control or reduce production, consumption, or use of any substance more rapidly than the applicable schedule under this subchapter.

In making any determination under paragraphs (1) and (2), the Administrator shall consider the status of the period remaining under the applicable schedule under this subchapter.

(b) Petition

(July 14, 1955, ch. 360, title VI, § 606, as added Pub. L. 101–549, title VI, § 602(a), Nov. 15, 1990, 104 Stat. 2660.)

§ 7671f. Exchange authority

(a) Transfers

(b) Interpollutant transfers

(1) The rules under this section shall permit a production allowance for a substance for any year to be transferred for a production allowance for another substance for the same year on an ozone depletion weighted basis.

(2) Allowances for substances in each group of class I substances (as listed pursuant to section 7671a of this title) may only be transferred for allowances for other substances in the same Group.

(3) The Administrator shall, as appropriate, establish groups of class II substances for trading purposes and assign class II substances to such groups. In the case of class II substances, allowances may only be transferred for allowances for other class II substances that are in the same Group.

The rules under this section shall permit 2 or more persons to transfer production allowances (including interpollutant transfers which meet the requirements of subsections (a) and (b)) if the transferor of such allowances will be subject, under such rules, to an enforceable and quantifiable reduction in annual production which—

(1) exceeds the reduction otherwise applicable to the transferor under this subchapter,

(2) exceeds the production allowances transferred to the transferee, and

(3) would not have occurred in the absence of such transaction.

(d) Consumption

(July 14, 1955, ch. 360, title VI, § 607, as added Pub. L. 101–549, title VI, § 602(a), Nov. 15, 1990, 104 Stat. 2660.)

§ 7671g. National recycling and emission reduction program

(a) In general

(1) The Administrator shall, by not later than January 1, 1992, promulgate regulations establishing standards and requirements regarding the use and disposal of class I substances during the service, repair, or disposal of appliances and industrial process refrigeration. Such standards and requirements shall become effective not later than July 1, 1992.

(2) The Administrator shall, within 4 years after November 15, 1990, promulgate regulations establishing standards and requirements regarding use and disposal of class I and II substances not covered by paragraph (1), including the use and disposal of class II substances during service, repair, or disposal of appliances and industrial process refrigeration. Such standards and requirements shall become effective not later than 12 months after promulgation of the regulations.

(3) The regulations under this subsection shall include requirements that—

(A) reduce the use and emission of such substances to the lowest achievable level, and

(B) maximize the recapture and recycling of such substances.

Such regulations may include requirements to use alternative substances (including substances which are not class I or class II substances) or to minimize use of class I or class II substances, or to promote the use of safe alternatives pursuant to section 7671k of this title or any combination of the foregoing.

(b) Safe disposalThe regulations under subsection (a) shall establish standards and requirements for the safe disposal of class I and II substances. Such regulations shall include each of the following—

(1) Requirements that class I or class II substances contained in bulk in appliances, machines or other goods shall be removed from each such appliance, machine or other good prior to the disposal of such items or their delivery for recycling.

(2) Requirements that any appliance, machine or other good containing a class I or class II substance in bulk shall not be manufactured, sold, or distributed in interstate commerce or offered for sale or distribution in interstate commerce unless it is equipped with a servicing aperture or an equally effective design feature which will facilitate the recapture of such substance during service and repair or disposal of such item.

(3) Requirements that any product in which a class I or class II substance is incorporated so as to constitute an inherent element of such product shall be disposed of in a manner that reduces, to the maximum extent practicable, the release of such substance into the environment. If the Administrator determines that the application of this paragraph to any product would result in producing only insignificant environmental benefits, the Administrator shall include in such regulations an exception for such product.

(1) Effective July 1, 1992, it shall be unlawful for any person, in the course of maintaining, servicing, repairing, or disposing of an appliance or industrial process refrigeration, to knowingly vent or otherwise knowingly release or dispose of any class I or class II substance used as a refrigerant in such appliance (or industrial process refrigeration) in a manner which permits such substance to enter the environment. De minimis releases associated with good faith attempts to recapture and recycle or safely dispose of any such substance shall not be subject to the prohibition set forth in the preceding sentence.

(2) Effective 5 years after November 15, 1990, paragraph (1) shall also apply to the venting, release, or disposal of any substitute substance for a class I or class II substance by any person maintaining, servicing, repairing, or disposing of an appliance or industrial process refrigeration which contains and uses as a refrigerant any such substance, unless the Administrator determines that venting, releasing, or disposing of such substance does not pose a threat to the environment. For purposes of this paragraph, the term “appliance” includes any device which contains and uses as a refrigerant a substitute substance and which is used for household or commercial purposes, including any air conditioner, refrigerator, chiller, or freezer.

(July 14, 1955, ch. 360, title VI, § 608, as added Pub. L. 101–549, title VI, § 602(a), Nov. 15, 1990, 104 Stat. 2661.)

§ 7671h. Servicing of motor vehicle air conditioners

(a) Regulations

(b) DefinitionsAs used in this section—

(1) The term “refrigerant” means any class I or class II substance used in a motor vehicle air conditioner. Effective 5 years after November 15, 1990, the term “refrigerant” shall also include any substitute substance.

(2)

(A) The term “approved refrigerant recycling equipment” means equipment certified by the Administrator (or an independent standards testing organization approved by the Administrator) to meet the standards established by the Administrator and applicable to equipment for the extraction and reclamation of refrigerant from motor vehicle air conditioners. Such standards shall, at a minimum, be at least as stringent as the standards of the Society of Automotive Engineers in effect as of

(B) Equipment purchased before the proposal of regulations under this section shall be considered certified if it is substantially identical to equipment certified as provided in subparagraph (A).

(3) The term “properly using” means, with respect to approved refrigerant recycling equipment, using such equipment in conformity with standards established by the Administrator and applicable to the use of such equipment. Such standards shall, at a minimum, be at least as stringent as the standards of the Society of Automotive Engineers in effect as of November 15, 1990, and applicable to the use of such equipment (SAE standard J–1989).

(4) The term “properly trained and certified” means training and certification in the proper use of approved refrigerant recycling equipment for motor vehicle air conditioners in conformity with standards established by the Administrator and applicable to the performance of service on motor vehicle air conditioners. Such standards shall, at a minimum, be at least as stringent as specified, as of November 15, 1990, in SAE standard J–1989 under the certification program of the National Institute for Automotive Service Excellence (ASE) or under a similar program such as the training and certification program of the Mobile Air Conditioning Society (MACS).

(d) Certification

(1) Effective 2 years after November 15, 1990, each person performing service on motor vehicle air conditioners for consideration shall certify to the Administrator either—

(A) that such person has acquired, and is properly using, approved refrigerant recycling equipment in service on motor vehicle air conditioners involving refrigerant and that each individual authorized by such person to perform such service is properly trained and certified; or

(B) that such person is performing such service at an entity which serviced fewer than 100 motor vehicle air conditioners in 1991.

(2) Effective January 1, 1993, each person who certified under paragraph (1)(B) shall submit a certification under paragraph (1)(A).

(3) Each certification under this subsection shall contain the name and address of the person certifying under this subsection and the serial number of each unit of approved recycling equipment acquired by such person and shall be signed and attested by the owner or another responsible officer. Certifications under paragraph (1)(A) may be made by submitting the required information to the Administrator on a standard form provided by the manufacturer of certified refrigerant recycling equipment.

(e) Small containers of class I or class II substances

(July 14, 1955, ch. 360, title VI, § 609, as added Pub. L. 101–549, title VI, § 602(a), Nov. 15, 1990, 104 Stat. 2662.)

§ 7671i. Nonessential products containing chlorofluorocarbons

(a) Regulations

(b) Nonessential productsThe regulations under this section shall identify nonessential products that release class I substances into the environment (including any release occurring during manufacture, use, storage, or disposal) and prohibit any person from selling or distributing any such product, or offering any such product for sale or distribution, in interstate commerce. At a minimum, such prohibition shall apply to—

(1) chlorofluorocarbon-propelled plastic party streamers and noise horns,

(2) chlorofluorocarbon-containing cleaning fluids for noncommercial electronic and photographic equipment, and

(3) other consumer products that are determined by the Administrator—

(A) to release class I substances into the environment (including any release occurring during manufacture, use, storage, or disposal), and

(B) to be nonessential.

In determining whether a product is nonessential, the Administrator shall consider the purpose or intended use of the product, the technological availability of substitutes for such product and for such class I substance, safety, health, and other relevant factors.

(d) Other products

(1) Effective January 1, 1994, it shall be unlawful for any person to sell or distribute, or offer for sale or distribution, in interstate commerce—

(A) any aerosol product or other pressurized dispenser which contains a class II substance; or

(B) any plastic foam product which contains, or is manufactured with, a class II substance.

(2) The Administrator is authorized to grant exceptions from the prohibition under subparagraph (A) of paragraph (1) where—

(A) the use of the aerosol product or pressurized dispenser is determined by the Administrator to be essential as a result of flammability or worker safety concerns, and

(B) the only available alternative to use of a class II substance is use of a class I substance which legally could be substituted for such class II substance.

(3) Subparagraph (B) of paragraph (1) shall not apply to—

(A) a foam insulation product, or

(B) an integral skin, rigid, or semi-rigid foam utilized to provide for motor vehicle safety in accordance with Federal Motor Vehicle Safety Standards where no adequate substitute substance (other than a class I or class II substance) is practicable for effectively meeting such Standards.

(e) Medical devices

(July 14, 1955, ch. 360, title VI, § 610, as added Pub. L. 101–549, title VI, § 602(a), Nov. 15, 1990, 104 Stat. 2664.)

§ 7671j. Labeling

(a) Regulations

(b) Containers containing class I or class II substances and products containing class I substances

(1) After 30 months after November 15, 1990, and before January 1, 2015, no product containing a class II substance shall be introduced into interstate commerce unless it bears the label referred to in subsection (b) if the Administrator determines, after notice and opportunity for public comment, that there are substitute products or manufacturing processes (A) that do not rely on the use of such class II substance, (B) that reduce the overall risk to human health and the environment, and (C) that are currently or potentially available.

(2) Effective January 1, 2015, the requirements of subsection (b) shall apply to all products containing a class II substance.

(d) Products manufactured with class I and class II substances

(1) In the case of a class II substance, after 30 months after November 15, 1990, and before January 1, 2015, if the Administrator, after notice and opportunity for public comment, makes the determination referred to in subsection (c) with respect to a product manufactured with a process that uses such class II substance, no such product shall be introduced into interstate commerce unless it bears a clearly legible and conspicuous label stating:

“Warning: Manufactured with [insert name of substance], a substance which harms public health and environment by destroying ozone in the upper atmosphere” 1

1 So in original. Probably should be followed by a period.

(2) In the case of a class I substance, effective 30 months after November 15, 1990, and before January 1, 2015, the labeling requirements of this subsection shall apply to all products manufactured with a process that uses such class I substance unless the Administrator determines that there are no substitute products or manufacturing processes that (A) do not rely on the use of such class I substance, (B) reduce the overall risk to human health and the environment, and (C) are currently or potentially available.

(e) Petitions

(1) Any person may, at any time after 18 months after November 15, 1990, petition the Administrator to apply the requirements of this section to a product containing a class II substance or a product manufactured with a class I or II substance which is not otherwise subject to such requirements. Within 180 days after receiving such petition, the Administrator shall, pursuant to the criteria set forth in subsection (c), either propose to apply the requirements of this section to such product or publish an explanation of the petition denial. If the Administrator proposes to apply such requirements to such product, the Administrator shall, by rule, render a final determination pursuant to such criteria within 1 year after receiving such petition.

(2) Any petition under this paragaph 2

2 So in original. Probably should be “paragraph”.

shall include a showing by the petitioner that there are data on the product adequate to support the petition.

(3) If the Administrator determines that information on the product is not sufficient to make the required determination the Administrator shall use any authority available to the Administrator under any law administered by the Administrator to acquire such information.

(4) In the case of a product determined by the Administrator, upon petition or on the Administrator’s own motion, to be subject to the requirements of this section, the Administrator shall establish an effective date for such requirements. The effective date shall be 1 year after such determination or 30 months after November 15, 1990, whichever is later.

(5) Effective January 1, 2015, the labeling requirements of this subsection 3

3 So in original. Probably should be “section”.

shall apply to all products manufactured with a process that uses a class I or class II substance.

(f) Relationship to other law

(1) The labeling requirements of this section shall not constitute, in whole or part, a defense to liability or a cause for reduction in damages in any suit, whether civil or criminal, brought under any law, whether Federal or State, other than a suit for failure to comply with the labeling requirements of this section.

(2) No other approval of such label by the Administrator under any other law administered by the Administrator shall be required with respect to the labeling requirements of this section.

(July 14, 1955, ch. 360, title VI, § 611, as added Pub. L. 101–549, title VI, § 602(a), Nov. 15, 1990, 104 Stat. 2665.)

§ 7671k. Safe alternatives policy

(a) Policy

(b) Reviews and reports

The Administrator shall—

(1) in consultation and coordination with interested members of the public and the heads of relevant Federal agencies and departments, recommend Federal research programs and other activities to assist in identifying alternatives to the use of class I and class II substances as refrigerants, solvents, fire retardants, foam blowing agents, and other commercial applications and in achieving a transition to such alternatives, and, where appropriate, seek to maximize the use of Federal research facilities and resources to assist users of class I and class II substances in identifying and developing alternatives to the use of such substances as refrigerants, solvents, fire retardants, foam blowing agents, and other commercial applications;

(2) examine in consultation and coordination with the Secretary of Defense and the heads of other relevant Federal agencies and departments, including the General Services Administration, Federal procurement practices with respect to class I and class II substances and recommend measures to promote the transition by the Federal Government, as expeditiously as possible, to the use of safe substitutes;

(3) specify initiatives, including appropriate intergovernmental, international, and commercial information and technology transfers, to promote the development and use of safe substitutes for class I and class II substances, including alternative chemicals, product substitutes, and alternative manufacturing processes; and

(4) maintain a public clearinghouse of alternative chemicals, product substitutes, and alternative manufacturing processes that are available for products and manufacturing processes which use class I and class II substances.

Within 2 years after November 15, 1990, the Administrator shall promulgate rules under this section providing that it shall be unlawful to replace any class I or class II substance with any substitute substance which the Administrator determines may present adverse effects to human health or the environment, where the Administrator has identified an alternative to such replacement that—

(1) reduces the overall risk to human health and the environment; and

(2) is currently or potentially available.

The Administrator shall publish a list of (A) the substitutes prohibited under this subsection for specific uses and (B) the safe alternatives identified under this subsection for specific uses.

(d) Right to petition

(e) Studies and notification

(July 14, 1955, ch. 360, title VI, § 612, as added Pub. L. 101–549, title VI, § 602(a), Nov. 15, 1990, 104 Stat. 2667.)

§ 7671l. Federal procurement

Not later than 18 months after November 15, 1990, the Administrator, in consultation with the Administrator of the General Services Administration and the Secretary of Defense, shall promulgate regulations requiring each department, agency, and instrumentality of the United States to conform its procurement regulations to the policies and requirements of this subchapter and to maximize the substitution of safe alternatives identified under section 7671k of this title for class I and class II substances. Not later than 30 months after November 15, 1990

(July 14, 1955, ch. 360, title VI, § 613, as added Pub. L. 101–549, title VI, § 602(a), Nov. 15, 1990, 104 Stat. 2668.)

§ 7671m. Relationship to other laws

(a) State laws

(b) Montreal Protocol

Upon November 15, 1990, the President shall—

(1) prohibit the export of technologies used to produce a class I substance;

(2) prohibit direct or indirect investments by any person in facilities designed to produce a class I or class II substance in nations that are not parties to the Montreal Protocol; and

(3) direct that no agency of the government provide bilateral or multilateral subsidies, aids, credits, guarantees, or insurance programs, for the purpose of producing any class I substance.

(July 14, 1955, ch. 360, title VI, § 614, as added Pub. L. 101–549, title VI, § 602(a), Nov. 15, 1990, 104 Stat. 2668.)

§ 7671n. Authority of Administrator

If, in the Administrator’s judgment, any substance, practice, process, or activity may reasonably be anticipated to affect the stratosphere, especially ozone in the stratosphere, and such effect may reasonably be anticipated to endanger public health or welfare, the Administrator shall promptly promulgate regulations respecting the control of such substance, practice, process, or activity, and shall submit notice of the proposal and promulgation of such regulation to the Congress.

(July 14, 1955, ch. 360, title VI, § 615, as added Pub. L. 101–549, title VI, § 602(a), Nov. 15, 1990, 104 Stat. 2669.)

§ 7671o. Transfers among Parties to Montreal Protocol

(a) In general

Consistent with the Montreal Protocol, the United States may engage in transfers with other Parties to the Protocol under the following conditions:

(1) The United States may transfer production allowances to another Party if, at the time of such transfer, the Administrator establishes revised production limits for the United States such that the aggregate national United States production permitted under the revised production limits equals the lesser of (A) the maximum production level permitted for the substance or substances concerned in the transfer year under the Protocol minus the production allowances transferred, (B) the maximum production level permitted for the substance or substances concerned in the transfer year under applicable domestic law minus the production allowances transferred, or (C) the average of the actual national production level of the substance or substances concerned for the 3 years prior to the transfer minus the production allowances transferred.

(2) The United States may acquire production allowances from another Party if, at the time of such transfer, the Administrator finds that the other Party has revised its domestic production limits in the same manner as provided with respect to transfers by the United States in this subsection.

(b) Effect of transfers on production limits

(d) “Applicable domestic law” defined

(July 14, 1955, ch. 360, title VI, § 616, as added Pub. L. 101–549, title VI, § 602(a), Nov. 15, 1990, 104 Stat. 2669.)

§ 7671p. International cooperation

(a) In general

(b) Assistance to developing countries

(July 14, 1955, ch. 360, title VI, § 617, as added Pub. L. 101–549, title VI, § 602(a), Nov. 15, 1990, 104 Stat. 2669.)

§ 7671q. Miscellaneous provisions

For purposes of section 7416 of this title, requirements concerning the areas addressed by this subchapter for the protection of the stratosphere against ozone layer depletion shall be treated as requirements for the control and abatement of air pollution. For purposes of section 7418 of this title, the requirements of this subchapter and corresponding State, interstate, and local requirements, administrative authority, and process, and sanctions respecting the protection of the stratospheric ozone layer shall be treated as requirements for the control and abatement of air pollution within the meaning of section 7418 of this title.

(July 14, 1955, ch. 360, title VI, § 618, as added Pub. L. 101–549, title VI, § 602(a), Nov. 15, 1990, 104 Stat. 2670.)