Collapse to view only § 208. Variations
- § 206. Standard gauge for sheet and plate iron and steel
- § 207. Preparation of standards by Secretary of Commerce
- § 208. Variations
For the purpose of securing uniformity the following is established as the only standard gauge for sheet and plate iron and steel in the United States of America, namely:
Number of gauge | Approximate thickness in fractions of an inch | Approximate thickness in decimal parts of an inch | Approximate thickness in millimeters | Weight per square foot in ounces avoirdupois | Weight per square foot in pounds avoirdupois | Weight per square foot in kilograms | Weight per square meter in kilograms | Weight per square meter in pounds avoirdupois |
|---|---|---|---|---|---|---|---|---|
0000000 | 1/2 | .5 | 12.7 | 320 | 20.00 | 9.072 | 97.65 | 215.28 |
000000 | 15/32 | .46875 | 11.90625 | 300 | 18.75 | 8.505 | 91.55 | 201.82 |
00000 | 7/16 | .4375 | 11.1125 | 280 | 17.50 | 7.983 | 85.44 | 188.37 |
0000 | 13/32 | .40625 | 10.31875 | 260 | 16.25 | 7.371 | 79.33 | 174.91 |
000 | 3/8 | .375 | 9.525 | 240 | 15 | 6.804 | 73.24 | 161.46 |
00 | 11/32 | .34375 | 8.73125 | 220 | 13.75 | 6.237 | 67.13 | 148.00 |
0 | 5/16 | .3125 | 7.9375 | 200 | 12.50 | 5.67 | 61.03 | 134.55 |
1 | 9/32 | .28125 | 7.14375 | 180 | 11.25 | 5.103 | 54.93 | 121.09 |
2 | 17/64 | .265625 | 6.746875 | 170 | 10.625 | 4.819 | 51.88 | 114.37 |
3 | 1/4 | .25 | 6.35 | 160 | 10 | 4.536 | 48.82 | 107.64 |
4 | 15/64 | .234375 | 5.953125 | 150 | 9.375 | 4.252 | 45.77 | 100.91 |
The Secretary of Commerce is authorized and required to prepare suitable standards in accordance with section 206 of this title.
In the practical use and application of the standard gauge esablished 1