View all text of Subjgrp 230 [§ 550.1165 - § 550.1167]
§ 550.1167 - What information must I submit with forms and for approvals?
You must submit the supporting information listed in the following table with the form identified in column 1 and for the approval required under this subpart identified in column 2:
| SRI BOEM-0127
(2 copies) | Reservoir reclassification | (a) Maps: | (1) Base map with surface, bottomhole, and completion locations with respect to the unit or lease line and the orientation of representative seismic lines or cross-sections | (2) Structure maps with penetration point and subsea depth for each well penetrating the reservoirs, highlighting subject wells; reservoir boundaries; and original and current fluid levels | √ | √ | (3) Net sand isopach with total net sand penetrated for each well, identified at the penetration point | * | (4) Net hydrocarbon isopach with net feet of pay for each well, identified at the penetration point | * | (b) Seismic data: | (1) Representative seismic lines, including strike and dip lines that confirm the structure; indicate polarity | (2) Amplitude extraction of seismic horizon, if applicable | √ | (c) Logs: | (1) Well log sections with tops and bottoms of the reservoir(s) and proposed or existing perforations | √ | √ | (2) Structural cross-sections showing the subject well and nearby wells | √ | (d) Engineering data: | (1) Estimated recoverable reserves for each well completion in the reservoir; total recoverable reserves for each reservoir; method of calculation; reservoir parameters used in volumetric and decline curve analysis | √ | (2) Well schematics showing current and proposed conditions | (3) The drive mechanism of each reservoir | √ | √ | (4) Pressure data, by date, and whether they are estimated or measured | √ | (5) Production data and decline curve analysis indicative of the reservoir performance | √ | (6) Reservoir simulation with the reservoir parameters used, history matches, and prediction runs (include proposed development scenario) | * | (e) General information: | (1) Detailed economic analysis | (2) Reservoir name and whether or not it is competitive as defined under § 250.105 | √ | √ | (3) Operator name, lessee name(s), block, lease number, royalty rate, and unit number (if applicable) of all relevant leases | (4) Geologic overview of project | √ | (5) Explanation of why the proposed completion scenario will maximize ultimate recovery | (6) List of all wells in subject reservoirs that have ever produced or been used for injection | √ |
|---|
√ Required.
* Additional items the Regional Supervisor may request.
Note: All maps must be at a standard scale and show lease and unit lines. The Regional Supervisor may waive submittal of some of the required data on a case-by-case basis.
(f) Depending on the type of approval requested, you must submit the appropriate payment of the service fee(s) listed in § 550.125, according to the instructions in § 550.126.