Collapse to view only § 3201.94 - Lotions and moisturizers.
- § 3201.10 - Mobile equipment hydraulic fluids.
- § 3201.11 - Roof coatings.
- § 3201.12 - Water tank coatings.
- § 3201.13 - Diesel fuel additives.
- § 3201.14 - Penetrating lubricants.
- § 3201.15 - Bedding, bed linens, and towels.
- § 3201.16 - Adhesive and mastic removers.
- § 3201.17 - Plastic insulating foam for residential and commercial construction.
- § 3201.18 - Hand cleaners and sanitizers.
- § 3201.109 - Intermediates—Chemicals.
- § 3201.19 - Composite panels.
- § 3201.110 - Intermediates—Paint and Coating Components.
- § 3201.111 - Intermediates—Textile Processing Materials.
- § 3201.112 - Intermediates—Foams.
- § 3201.113 - Intermediates—Fibers and Fabrics.
- § 3201.114 - Intermediates—Lubricant Components.
- § 3201.115 - Intermediates—Binders.
- § 3201.116 - Intermediates—Cleaner Components.
- § 3201.117 - Intermediates—Personal Care Product Components.
- § 3201.118 - Intermediates—Oils, Fats, and Waxes.
- § 3201.20 - Fluid-filled transformers.
- § 3201.119 - Intermediates—Rubber Materials.
- § 3201.120 - Adhesives.
- § 3201.121 - Animal habitat care products.
- § 3201.122 - Cleaning tools.
- § 3201.123 - Concrete curing agents.
- § 3201.124 - Concrete repair materials.
- § 3201.125 - Durable cutlery.
- § 3201.126 - Durable tableware.
- § 3201.127 - Epoxy systems.
- § 3201.128 - Exterior paints and coatings.
- § 3201.21 - Disposable containers.
- § 3201.129 - Facial care products.
- § 3201.130 - Feminine care products.
- § 3201.131 - Fire logs and fire starters.
- § 3201.132 - Folders and filing products.
- § 3201.133 - Foliar sprays.
- § 3201.134 - Gardening supplies and accessories.
- § 3201.135 - Heating fuels and wick lamps.
- § 3201.136 - Kitchenware and accessories.
- § 3201.137 - Other lubricants.
- § 3201.138 - Phase change materials.
- § 3201.22 - Fertilizers.
- § 3201.139 - Playground and athletic surface materials.
- § 3201.140 - Powder coatings.
- § 3201.141 - Product packaging.
- § 3201.142 - Rugs and floor mats.
- § 3201.143 - Shopping and trash bags.
- § 3201.144 - Soil amendments.
- § 3201.145 - Surface guards, molding, and trim.
- § 3201.146 - Toys and sporting gear.
- § 3201.147 - Traffic and zone marking paints.
- § 3201.148 - Transmission fluids.
- § 3201.23 - Sorbents.
- § 3201.149 - Wall coverings.
- § 3201.24 - Graffiti and grease removers.
- § 3201.25 - 2-Cycle engine oils.
- § 3201.26 - Lip care products.
- § 3201.27 - Films.
- § 3201.28 - Stationary equipment hydraulic fluids.
- § 3201.29 - Disposable cutlery.
- § 3201.30 - Glass cleaners.
- § 3201.31 - Greases.
- § 3201.32 - Dust suppressants.
- § 3201.33 - Carpets.
- § 3201.34 - Carpet and upholstery cleaners.
- § 3201.35 - Bathroom and spa cleaners.
- § 3201.36 - Concrete and asphalt release fluids.
- § 3201.37 - De-Icers.
- § 3201.38 - Firearm cleaners, lubricants, and protectants.
- § 3201.39 - Floor strippers.
- § 3201.40 - Laundry products.
- § 3201.41 - Metalworking fluids.
- § 3201.42 - Wood and concrete sealers.
- § 3201.43 - Chain and cable lubricants.
- § 3201.44 - Corrosion preventatives.
- § 3201.45 - Food cleaners.
- § 3201.46 - Forming lubricants.
- § 3201.47 - Gear lubricants.
- § 3201.48 - General purpose household cleaners.
- § 3201.49 - Industrial cleaners.
- § 3201.50 - Multipurpose cleaners.
- § 3201.51 - Parts wash solutions.
- § 3201.52 - Disposable tableware.
- § 3201.53 - Expanded polystyrene (EPS) foam recycling products.
- § 3201.54 - Heat transfer fluids.
- § 3201.55 - Ink removers and cleaners.
- § 3201.56 - Mulch and compost materials.
- § 3201.57 - Multipurpose lubricants.
- § 3201.58 - [Reserved]
- § 3201.59 - Topical pain relief products.
- § 3201.60 - Turbine drip oils.
- § 3201.61 - Animal repellents.
- § 3201.62 - Bath products.
- § 3201.63 - Bioremediation materials.
- § 3201.64 - Compost activators and accelerators.
- § 3201.65 - Concrete and asphalt cleaners.
- § 3201.66 - Cuts, burns, and abrasions ointments.
- § 3201.67 - Dishwashing products.
- § 3201.68 - Erosion control materials.
- § 3201.69 - Floor cleaners and protectors.
- § 3201.70 - Hair care products.
- § 3201.71 - Interior paints and coatings.
- § 3201.72 - Oven and grill cleaners.
- § 3201.73 - Slide way lubricants.
- § 3201.74 - Thermal shipping containers.
- § 3201.75 - Air fresheners and deodorizers.
- § 3201.76 - Asphalt and tar removers.
- § 3201.77 - Asphalt restorers.
- § 3201.78 - Blast media.
- § 3201.79 - Candles and wax melts.
- § 3201.80 - Electronic components cleaners.
- § 3201.81 - Floor coverings (non-carpet).
- § 3201.82 - Foot care products.
- § 3201.83 - Furniture cleaners and protectors.
- § 3201.84 - Inks.
- § 3201.85 - Packing and insulating materials.
- § 3201.86 - Pneumatic equipment lubricants.
- § 3201.87 - Wood and concrete stains.
- § 3201.88 - Agricultural spray adjuvants.
- § 3201.89 - Animal cleaning products.
- § 3201.90 - Deodorants.
- § 3201.91 - Dethatcher products.
- § 3201.92 - Fuel conditioners.
- § 3201.93 - Leather, vinyl, and rubber care products.
- § 3201.94 - Lotions and moisturizers.
- § 3201.95 - Shaving products.
- § 3201.96 - Specialty precision cleaners and solvents.
- § 3201.97 - Sun care products.
- § 3201.98 - Wastewater systems coatings.
- § 3201.99 - Water and wastewater treatment chemicals.
- § 3201.100 - Aircraft and boat cleaners.
- § 3201.101 - Automotive care products.
- § 3201.102 - Engine crankcase oils.
- § 3201.103 - Gasoline fuel additives.
- § 3201.104 - Metal cleaners and corrosion removers.
- § 3201.105 - Microbial cleaning products.
- § 3201.106 - Paint removers.
- § 3201.107 - Water turbine bearing oils.
- § 3201.108 - Intermediates—Plastic Resins.
§ 3201.10 - Mobile equipment hydraulic fluids.
(a) Definition. Hydraulic fluids formulated for general use in non-stationary equipment, such as tractors, end loaders, or backhoes.
(b) Minimum biobased content. The minimum biobased content is 44 percent and shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference effective date. No later than March 16, 2007, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased mobile equipment hydraulic fluids. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased mobile equipment hydraulic fluids.
(d) Determining overlap with an EPA-designated recovered content product. Qualifying biobased products that fall under this item may, in some cases, overlap with the following EPA-designated recovered content product: Re-refined Lubricating Oils. USDA is requesting that manufacturers of these qualifying biobased products provide information for the BioPreferred Web site of qualifying biobased products about the intended uses of the product, information on whether or not the product contains petroleum-based ingredients, re-refined oil, and/or any other recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether or not a qualifying biobased product overlaps with EPA-designated lubricating oils containing re-refined oil and which product should be afforded the preference in purchasing.
Note to paragraph (Mobile equipment hydraulic fluid products within this designated item can compete with similar lubricating oils containing re-refined oil. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency designated lubricating oils containing re-refined oil as items for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.11.
§ 3201.11 - Roof coatings.
(a) Definition. Coatings formulated for use in commercial roof deck systems to provide a single-coat monolith coating system.
(b) Minimum biobased content. The minimum biobased content is 20 percent and shall be based on the entire product.
(c) Preference effective date. No later than March 16, 2007, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased roof coatings. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased roof coatings.
(d) Determining overlap with an EPA-designated recovered content product. Qualifying biobased products that fall under this item may, in some cases, overlap with the following EPA-designated recovered content product: Roofing Materials. USDA is requesting that manufacturers of these qualifying biobased products provide information for the BioPreferred Web site of qualifying biobased products about the intended uses of the product, information on whether or not the product contains any type of recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether or not a qualifying biobased product overlaps with recovered content roofing materials and which product should be afforded the preference in purchasing.
Note to paragraph (Roof coating products within this designated item can compete with similar roofing material products. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency designated roofing material containing recycled material as items for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.12.
§ 3201.12 - Water tank coatings.
(a) Definition. Coatings formulated for use in potable water storage systems.
(b) Minimum biobased content. The minimum biobased content is 59 percent and shall be based on the entire product.
(c) Preference effective date. No later than November 20, 2007, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased water tank coatings. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased water tank coatings.
§ 3201.13 - Diesel fuel additives.
(a) Definition. (1) Any substance, other than one composed solely of carbon and/or hydrogen, that is intentionally added to diesel fuel (including any added to a motor vehicle's fuel system) and that is not intentionally removed prior to sale or use.
(2) Neat biodiesel, also referred to as B100, when used as an additive. Diesel fuel additive does not mean neat biodiesel when used as a fuel or blended biodiesel fuel (e.g., B20).
(b) Minimum biobased content. The minimum biobased content is 90 percent and shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference effective date. No later than March 16, 2007, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased diesel fuel additives. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased diesel fuel additives.
§ 3201.14 - Penetrating lubricants.
(a) Definition. Products formulated to provide light lubrication and corrosion resistance in close tolerant internal and external applications including frozen nuts and bolts, power tools, gears, valves, chains, and cables.
(b) Minimum biobased content. The minimum biobased content is 68 percent and shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference effective date. No later than March 16, 2007, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased penetrating lubricants. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased penetrating lubricants.
(d) Determining overlap with an EPA-designated recovered content product. Qualifying biobased products that fall under this item may, in some cases, overlap with the following EPA-designated recovered content product: Re-refined Lubricating Oils. USDA is requesting that manufacturers of these qualifying biobased products provide information for the BioPreferred Web site of qualifying biobased products about the intended uses of the product, information on whether or not the product contains petroleum-based ingredients, re-refined oil, and/or any other recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether or not a qualifying biobased product overlaps with EPA-designated lubricating oils containing re-refined oil and which product should be afforded the preference in purchasing.
Note to paragraph (Penetrating lubricant products within this designated item can compete with similar re-refined lubricating oil products. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency designated re-refined lubricating oils containing recycled material as items for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.11.
§ 3201.15 - Bedding, bed linens, and towels.
(a) Definition. (1) Bedding is that group of woven cloth products used as coverings on a bed. Bedding includes products such as blankets, bedspreads, comforters, and quilts.
(2) Bed linens are woven cloth sheets and pillowcases used in bedding.
(3) Towels are woven cloth products used primarily for drying and wiping.
(b) Minimum biobased content. The minimum biobased content is 12 percent and shall be based on the amount of qualifying biobased carbon in the finished product as a percent of the weight (mass) of the total organic carbon in the finished product. The 12 percent biobased content must be of a qualifying biobased feedstock. Cotton, wool, linen, and silk are not qualifying biobased feedstocks for the purpose of determining the biobased content of bedding, bed linens, and towels.
(c) Preference effective date. No later than November 20, 2007, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased bedding, bed linens, and towels. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased bedding, bed linens, and towels.
§ 3201.16 - Adhesive and mastic removers.
(a) Definition. Solvent products formulated for use in removing asbestos, carpet, and tile mastics as well as adhesive materials, including glue, tape, and gum, from various surface types.
(b) Minimum biobased content. The preferred procurement product must have a biobased content of at least 58 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased adhesive and mastic removers. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased adhesive and mastic removers.
§ 3201.17 - Plastic insulating foam for residential and commercial construction.
(a) Definition. Spray-in-place plastic foam products designed to provide a sealed thermal barrier for residential or commercial construction applications.
(b) Minimum biobased content. The preferred procurement product must have a biobased content of at least 7 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased plastic insulating foam for residential and commercial construction. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased plastic insulating foam for residential and commercial construction.
(d) Determining overlap with an EPA-designated recovered content product. Qualifying biobased products that fall under this item may, in some cases, overlap with the EPA-designated recovered content product: Building Insulation. USDA is requesting that manufacturers of these qualifying biobased products provide information on the BioPreferred Web site of qualifying biobased products about the intended uses of the product, information on whether or not the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether or not a qualifying biobased product overlaps with EPA-designated building insulation and which product should be afforded the preference in purchasing.
Note to paragraph (Biobased insulating products within this designated item can compete with similar insulating products with recycled content. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency designated building insulation containing recovered materials as items for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.12. EPA provides recovered materials content recommendations for building insulation products in the Recovered Materials Advisory Notice (RMAN) published for these products. The RMAN recommendations can be found by accessing EPA's Web site http://www.epa.gov/epaoswer/non-hw/procure/products.htm and then clicking on the appropriate product name.
§ 3201.18 - Hand cleaners and sanitizers.
(a) Definitions—(1) Hand cleaners. Products formulated for personal care use in removing a variety of different soils, greases, and similar substances from human hands with or without the use of water.
(2) Hand sanitizers. Products formulated for personal care use in removing bacteria from human hands with or without the use of water. Personal care products that are formulated for use in removing a variety of different soils, greases and similar substances and bacteria from human hands with or without the use of water are classified as hand sanitizers for the purposes of this rule.
(b) Minimum biobased content. The minimum biobased content requirement for all hand cleaners and/or sanitizers shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. The applicable minimum biobased contents are:
(1) Hand cleaners—64 percent.
(2) Hand sanitizers (including hand cleaners and sanitizers)—73 percent.
(c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased hand cleaners and sanitizers. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased hand cleaners and sanitizers.
§ 3201.109 - Intermediates—Chemicals.
(a) Definition. Intermediates—Chemicals are those used as reactants for organic synthesis reactions rather than for their functional properties in a chemical mixture; those used as building block chemicals and secondary chemicals such as glycerol, succinic acid, propanediol, and monomers such as lactic acid and propylene; those used for specific functional properties during manufacturing of other products such as pH regulators, flocculants, precipitants, neutralizing agents, emulsifiers, viscosity reducers, rheology modifiers, adhesion agents, detergents, wetting agents, foaming agents, or dispersants; those that are added to end-use products for their specific functional properties including polyols, polymers, and solvents for thinning and drying applications but excluding solvents used for cleaning; and those used for dyes, pigments, and scents including flavorings for non-food products such as lip balm.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 22 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 10, 2019, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased Intermediates—Chemicals. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased Intermediates—Chemicals.
§ 3201.19 - Composite panels.
(a) Definitions—(1) Plastic lumber composite panels. Engineered products suitable for non-structural outdoor needs such as exterior signs, trash can holders, and dimensional letters.
(2) Acoustical composite panels. Engineered products designed for use as structural and sound deadening material suitable for office partitions and doors.
(3) Interior panels. Engineered products designed specifically for interior applications and providing a surface that is impact-, scratch-, and wear-resistant and that does not absorb or retain moisture.
(4) Structural interior panels. Engineered products designed for use in structural construction applications, including cabinetry, casework, paneling, and decorative panels.
(5) Structural wall panels. Engineered products designed for use in structural walls, curtain walls, floors and flat roofs in commercial buildings.
(6) Countertops. Engineered products designed to serve as horizontal work surfaces in locations such as kitchens, break rooms or other food preparation areas, bathrooms or lavatories, and workrooms.
(b) Minimum biobased content. The minimum biobased content requirement for all composite panels shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. The applicable minimum biobased contents are:
(1) Plastic lumber composite panels—23 percent.
(2) Acoustical composite panels—37 percent.
(3) Interior panels—55 percent.
(4) Structural interior panels—89 percent.
(5) Structural wall panels—94 percent.
(6) Countertops—89 percent.
(c) Preference compliance dates. (1) No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for those qualifying biobased composite panels specified in paragraphs (a)(1) through (a)(5) of this section. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased composite panels.
(2) No later than June 11, 2014, procuring agencies, in accordance with this part, will give a procurement preference for those qualifying biobased composite panels specified in paragraph (a)(6) of this section. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased composite panels.
(d) Determining overlap with an EPA-designated recovered content product. Qualifying biobased products that fall under this item may, in some cases, overlap with the following EPA-designated recovered content products: Laminated Paperboard and Structural Fiberboard; Shower and Restroom Dividers; and Signage. USDA is requesting that manufacturers of these qualifying biobased products provide information on the BioPreferred Web site of qualifying biobased products about the intended uses of the product, information on whether or not the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether or not a qualifying biobased product overlaps with EPA-designated laminated paperboard, structural fiberboard, shower and restroom dividers, and signage, and which product should be afforded the preference in purchasing.
Note to paragraph (Composite panel products within this designated item can be made with recycled material. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency designated laminated paperboard and structural fiberboard, shower and restroom dividers, and signage containing recovered materials as items for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.12. EPA provides recovered materials content recommendations for laminated paperboard and structural fiberboard, shower and restroom dividers, and signage in the Recovered Materials Advisory Notice (RMAN) published for these products. The RMAN recommendations can be found by accessing EPA's Web site http://www.epa.gov/epaoswer/non-hw/procure/products.htm and then clicking on the appropriate product name.
§ 3201.110 - Intermediates—Paint and Coating Components.
(a) Definition. Intermediates—Paint and Coating Components are ingredients used to formulate finished waterborne or solvent borne paint and coating products. Examples of Intermediates—Paint and Coating Components include binders, pigments, thickeners, curing agents, modifiers, humectants, open time additives, alkyd latex resins, polymers, polyols, reactive oligomers, or reactive diluents.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 22 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 10, 2019, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased Intermediates—Paint and Coating Components. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased Intermediates—Paint and Coating Components.
§ 3201.111 - Intermediates—Textile Processing Materials.
(a) Definition. Intermediates—Textile Processing Materials are used to treat or finish textiles for the purposes of altering textile characteristics such as color, fading, wrinkle resistance, texture, or moisture management.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 22 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 10, 2019, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased Intermediates—Textile Processing Materials. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased Intermediates—Textile Processing Materials.
§ 3201.112 - Intermediates—Foams.
(a) Definition. Intermediates—Foams are dry polymer foams used for non-construction purposes, such as cushions for furniture.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 22 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 10, 2019, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased Intermediates—Foams. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased Intermediates—Foams.
§ 3201.113 - Intermediates—Fibers and Fabrics.
(a) Definition. Intermediates—Fibers and Fabrics encompasses plant and animal fibers, fibers made from plant-derived polymers that are not yet formed into more complex products such as carpet or fabrics, fabrics made from natural fibers, fabrics made from synthetic fibers, or fabrics made from a blend of the two. These materials are used to manufacture finished products such as clothing, upholstery, or drapes.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 25 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 10, 2019, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased Intermediates—Fibers and Fabrics. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased Intermediates—Fibers and Fabrics.
§ 3201.114 - Intermediates—Lubricant Components.
(a) Definition. Intermediates—Lubricant Components are ingredients that used specifically to formulate finished lubricant products. Examples of Intermediates—Lubricant Components include base oils, base fluids, additives, or friction modifiers.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 44 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 10, 2019, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased Intermediates—Lubricant Components. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased Intermediates—Lubricant Components.
§ 3201.115 - Intermediates—Binders.
(a) Definition. Intermediates—Binders are materials used to provide cohesiveness throughout an entire finished product. Binders are generally polymers or polymer precursors (such as epoxies) and include the polymeric materials used to formulate coatings, adhesives, sealants, and elastomers. The product category does not include adhesives and glues that are finished products used to attach the surfaces of two or more distinct and separate components to one another.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 47 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 10, 2019, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased Intermediates—Binders. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased Intermediates—Binders.
§ 3201.116 - Intermediates—Cleaner Components.
(a) Definition. Intermediates—Cleaner Components are intermediate ingredients used specifically for formulating finished cleaning products. Examples of Intermediates—Cleaner Components include chelating agents, surfactants, hydrotropes, fatty acids, or solvents.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 55 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 10, 2019, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased Intermediates—Cleaner Components. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased Intermediates—Cleaner Components.
§ 3201.117 - Intermediates—Personal Care Product Components.
(a) Definition. Intermediates—Personal Care Product Components are ingredients used to formulate finished personal care products. Examples of Intermediates—Personal Care Product Components include surfactants, oils, humectants, emollients, or emulsifiers.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 62 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 10, 2019, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased Intermediates—Personal Care Product Components. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased Intermediates—Personal Care Product Components.
§ 3201.118 - Intermediates—Oils, Fats, and Waxes.
(a) Definition. Intermediates—Oils, Fats, and Waxes include raw or modified fats and oils derived from plants or animals.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 65 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 10, 2019, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased Intermediates—Oils, Fats, and Waxes. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased Intermediates—Oils, Fats, and Waxes.
§ 3201.20 - Fluid-filled transformers.
(a) Definition—(1) Synthetic ester-based fluid-filled transformers. Electric power transformers that are designed to utilize a synthetic ester-based dielectric (non-conducting) fluid to provide insulating and cooling properties.
(2) Vegetable oil-based fluid-filled transformers. Electric power transformers that are designed to utilize a vegetable oil-based dielectric (non-conducting) fluid to provide insulating and cooling properties.
(b) Minimum biobased content. The minimum biobased content requirement for all fluid-filled transformers shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. The applicable minimum biobased contents are:
(1) Synthetic ester-based fluid-filled transformers—66 percent.
(2) Vegetable oil-based fluid-filled transformers—95 percent.
(c) Preference compliance date—(1) Synthetic ester-based fluid-filled transformers. Determination of the compliance date for synthetic ester-based fluid-filled transformers is deferred until USDA identifies two or more manufacturers of synthetic ester-based fluid-filled transformers. At that time, USDA will publish a document in the
(2) Vegetable oil-based fluid-filled transformers. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased vegetable oil-based fluid-filled transformers. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased vegetable oil-based fluid-filled transformers.
§ 3201.119 - Intermediates—Rubber Materials.
(a) Definition. Intermediates—Rubber Materials are used in finished products such as rubber gloves, vehicle tires, footwear, sports apparel and equipment, bedding and pillow foams, tubing, catheters, gasketing, or cosmetic adhesives and bases.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 96 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 10, 2019, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased Intermediates—Rubber Materials. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased Intermediates—Rubber Materials.
§ 3201.120 - Adhesives.
(a) Definition. Adhesives are compounds that temporarily or permanently bind two item surfaces together. These products include glues and sticky tapes used in construction, household, flooring, and industrial settings. This category excludes epoxy systems.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 24 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased adhesives. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased adhesives.
§ 3201.121 - Animal habitat care products.
(a) Definition. Animal habitat care products are products that are intended to improve the quality of animal habitats such as cleaning supplies, sanitizers, feeders, and products that control, mask, or suppress pet odors. This category excludes animal bedding or litter products and animal cleaning products.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 22 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased animal habitat care products. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased animal habitat care products.
§ 3201.122 - Cleaning tools.
(a) Definition. Cleaning tools are objects that are used to clean a variety of surfaces or items and can be used multiple times. This category includes tools such as brushes, scrapers, abrasive pads, and gloves that are used for cleaning. The expendable materials used in cleaning, such as glass cleaners, single-use wipes, and all-purpose cleaners, are excluded from this category, as these materials better fit in other categories.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 22 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased cleaning tools. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased cleaning tools.
§ 3201.123 - Concrete curing agents.
(a) Definition. Concrete curing agents are products that are designed to enhance and control the curing process of concrete.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 59 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased concrete curing agents. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased concrete curing agents.
(d) Determining overlap with a designated product category in the EPA's Comprehensive Procurement Guideline (CPG) program. Qualifying products within this product category may overlap with the EPA's CPG-designated recovered content product category of Construction Products: Cement and Concrete. USDA is requesting that manufacturers of these qualifying biobased products provide information on the BioPreferred Program's website about the intended uses of the product, information on whether the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether a qualifying biobased product overlaps with the EPA's CPG-designated product category of Construction Products: Cement and Concrete and which product should be afforded the preference in purchasing.
Note 1 to Paragraph (Concrete curing agents within this designated product category can compete with similar concrete curing agents with recycled content. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency CPG-designated Construction Products: Cement and Concrete containing recovered materials as products for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.12.
§ 3201.124 - Concrete repair materials.
(a) Definition. (1) Products that are designed to repair cracks and other damage to concrete.
(2) Concrete repair materials for which preferred procurement applies are:
(i) Concrete repair materials—concrete leveling. Concrete repair materials—concrete leveling are products that are designed to repair cracks and other damage to concrete by raising or stabilizing concrete.
(ii) Concrete repair materials—concrete patching. Concrete repair materials—concrete patching are products that are designed to repair cracks and other damage to concrete by filling and patching the concrete.
(b) Minimum biobased content. The minimum biobased content for all concrete repair materials shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product. The applicable minimum biobased contents are:
(1) Concrete repair materials—concrete leveling—23 percent.
(2) Concrete repair materials—concrete patching—69 percent.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased concrete repair materials. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased concrete repair materials.
(d) Determining overlap with a designated product category in the EPA's CPG program. Qualifying products within this product category may overlap with the EPA's CPG-designated recovered content product category of Construction Products: Cement and Concrete. USDA is requesting that manufacturers of these qualifying biobased products provide information on the BioPreferred Program's website about the intended uses of the product, information on whether the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether a qualifying biobased product overlaps with the EPA's CPG-designated product category of Construction Products: Cement and Concrete and which product should be afforded the preference in purchasing.
Note 1 to Paragraph (Concrete repair materials within this designated product category can compete with similar concrete repair materials with recycled content. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency CPG-designated Construction Products: Cement and Concrete containing recovered materials as products for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.12.
§ 3201.125 - Durable cutlery.
(a) Definition. Durable cutlery consists of dining utensils that are designed to be used multiple times.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 28 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased durable cutlery. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased durable cutlery.
§ 3201.126 - Durable tableware.
(a) Definition. Durable tableware consists of multiple-use drinkware and dishware including cups, plates, bowls, and serving platters.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 28 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased durable tableware. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased durable tableware.
§ 3201.127 - Epoxy systems.
(a) Definition. Epoxy systems are two-component systems that are epoxy-based and are used as coatings, adhesives, surface fillers, and composite matrices.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 23 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased epoxy systems. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased epoxy systems.
§ 3201.128 - Exterior paints and coatings.
(a) Definition. Exterior paints and coatings are pigmented liquid products that typically contain pigments to add color and are formulated for use on outdoor surfaces. When these products dry, they typically form a protective layer and provide a coat of color to the applied surface. This category includes paint and primers but excludes wood and concrete sealers and stains and specialty coatings such as roof coatings, wastewater system coatings, and water tank coatings.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 83 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased exterior paints and coatings. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased exterior paints and coatings.
(d) Determining overlap with a designated product category in the EPA's CPG program. Qualifying products within this product category may overlap with the EPA's CPG-designated recovered content product category of Construction Products: Consolidated and Reprocessed Latex Paint for Specified Uses. USDA is requesting that manufacturers of these qualifying biobased products provide information on the BioPreferred Program's website about the intended uses of the product, information on whether the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether a qualifying biobased product overlaps with the EPA's CPG-designated product category of Construction Products: Consolidated and Reprocessed Latex Paint for Specified Uses and which product should be afforded the preference in purchasing.
Note 1 to Paragraph (Exterior paints and coatings within this designated product category can compete with similar exterior paints and coatings with recycled content. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency CPG-designated Construction Products: Consolidated and Reprocessed Latex Paint for Specified Uses containing recovered materials as products for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.12.
§ 3201.21 - Disposable containers.
(a) Definition. Products designed to be used for temporary storage or transportation of materials including, but not limited to, food items.
(b) Minimum biobased content. The preferred procurement product must have a biobased content of at least 72 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Biodegradability. At the time a manufacturer offers a product under this item for Federal purchase under the BioPreferred Program, the preferred procurement product must be capable of meeting the current version of ASTM D6400 if disposed of in a non-marine environment, the current version of ASTM D7081 if disposed of in a marine environment, or other appropriate and applicable standard for biodegradability.
(d) Determining overlap with an EPA-designated recovered content product. Qualifying biobased products that fall under this item may, in some cases, overlap with the EPA-designated recovered content product: Paper and Paper Products. USDA is requesting that manufacturers of these qualifying biobased products provide information on the BioPreferred Web site of qualifying biobased products about the intended uses of the product, information on whether or not the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether or not a qualifying biobased product overlaps with EPA-designated paper and paper products and which product should be afforded the preference in purchasing.
Note to paragraph (Disposable containers can include boxes and packaging made from paper. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency designated paper and paper products containing recovered materials as items for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.10. EPA provides recovered materials content recommendations for paper and paper products in the Recovered Materials Advisory Notice (RMAN) published for these products. The RMAN recommendations can be found on EPA's Web site http://www.epa.gov/epaoswer/non-hw/procure/products.htm and then clicking on the appropriate product name.
(e) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased disposable containers. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased disposable containers.
§ 3201.129 - Facial care products.
(a) Definition. Facial care products are cleansers, moisturizers, and treatments specifically designed for the face. These products are used to care for the condition of the face by supporting skin integrity, enhancing its appearance, and relieving skin conditions. This category does not include tools and applicators, such as those used to apply facial care products.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 88 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased facial care products. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased facial care products.
§ 3201.130 - Feminine care products.
(a) Definition. Feminine care products are products that are designed for maintaining feminine health and hygiene. This category includes sanitary napkins, panty liners, and tampons.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 65 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased feminine care products. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased feminine care products.
§ 3201.131 - Fire logs and fire starters.
(a) Definition. Fire logs and fire starters are devices or substances that are used to start a fire intended for uses such as comfort heat, decoration, or cooking. Examples include fire logs and lighter fluid. This category excludes heating fuels for chafing dishes, beverage urns, warming boxes, and wick lamps.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 92 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased fire logs and fire starters. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased fire logs and fire starters.
§ 3201.132 - Folders and filing products.
(a) Definition. Folders and filing products are products that are designed to hold together items such as loose sheets of paper, documents, and photographs with clasps, fasteners, rings, or folders. This category includes binders, folders, and document covers.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 56 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased folders and filing products. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased folders and filing products.
(d) Determining overlap with a designated product category in the EPA's CPG program. Qualifying products within this product category may overlap with the EPA's CPG-designated recovered content product categories of Non-Paper Office Products: Binders, Clipboards, File Folders, Clip Portfolios, and Presentation Folders and Non-Paper Office Products: Plastic Envelopes. USDA is requesting that manufacturers of these qualifying biobased products provide information on the BioPreferred Program's website about the intended uses of the product, information on whether the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether a qualifying biobased product overlaps with the EPA's CPG-designated product categories of Non-Paper Office Products: Binders, Clipboards, File Folders, Clip Portfolios, and Presentation Folders and Non-Paper Office Products: Plastic Envelopes and which product should be afforded the preference in purchasing.
Note 1 to Paragraph (Biobased folders and filing products within this designated product category can compete with similar folders and filing products with recycled content. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency CPG-designated Non-Paper Office Products: Binders, Clipboards, File Folders, Clip Portfolios, and Presentation Folders and Non-Paper Office Products: Plastic Envelopes containing recovered materials as products for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.16.
§ 3201.133 - Foliar sprays.
(a) Definition. Foliar sprays are products that are applied to the leaves of plants and provide plants with nutrients. These products may also repair plants from previous pest attacks. Examples include liquid fertilizers, foliar feeds, and micronutrient solutions.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 50 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased foliar sprays. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased foliar sprays.
§ 3201.134 - Gardening supplies and accessories.
(a) Definition. Gardening supplies and accessories are products that are used to grow plants in outdoor and indoor settings. Examples include seedling starter trays, nonwoven mats or substrates for hydroponics, and flower or plant pots. This category excludes compost activators and accelerators; erosion control materials; fertilizers, including soil inoculants; foliar sprays; mulch and compost materials; and soil amendments.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 43 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased gardening supplies and accessories. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased gardening supplies and accessories.
§ 3201.135 - Heating fuels and wick lamps.
(a) Definition. Heating fuels and wick lamps are products that create controlled sources of heat or sustain controlled open flames that are used for warming food, portable stoves, beverage urns, or fondue pots. This category also includes wick lamps and their fuels that create controlled sources of light indoors and in camping or emergency preparedness situations. This category excludes fire logs and fire starters and candles and wax melts.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 75 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased heating fuels and wick lamps. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased heating fuels and wick lamps.
§ 3201.136 - Kitchenware and accessories.
(a) Definition. Kitchenware and accessories are products designed for food or drink preparation. These products include cookware and bakeware, such as baking cups, cookie sheets, parchment paper, and roasting bags or pans; cooking utensils, such as brushes, tongs, spatulas, and ladles; and food preparation items, such as cutting boards, measuring cups, mixing bowls, coffee filters, food preparation gloves, and sandwich and snack bags. These products exclude kitchen appliances, such as toasters, blenders, and coffee makers; disposable tableware; disposable cutlery; disposable containers; durable tableware; durable cutlery; and cleaning tools.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 22 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased kitchenware and accessories. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased kitchenware and accessories.
§ 3201.137 - Other lubricants.
(a) Definition. Other lubricants are lubricant products that do not fit into any of the BioPreferred Program's specific lubricant categories. This category includes lubricants that are formulated for specialized uses. Examples of other lubricants include lubricants used for sporting or exercise gear and equipment, musical instruments, and specialized equipment such as tree shakers. This category excludes lubricants that are covered by the specific lubricant categories such as chain and cable lubricants, firearm lubricants, forming lubricants, gear lubricants, multi-purpose lubricants, penetrating lubricants, pneumatic equipment lubricants, and slide way lubricants.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 39 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased other lubricants. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased other lubricants.
(d) Determining overlap with a designated product category in the EPA's CPG program. Qualifying products within this product category may overlap with the EPA's CPG-designated recovered content product category of Vehicular Products: Re-Refined Lubricating Oil. USDA is requesting that manufacturers of these qualifying biobased products provide information on the BioPreferred Program's website about the intended uses of the product, information on whether the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether a qualifying biobased product overlaps with the EPA's CPG-designated product category of Vehicular Products: Re-Refined Lubricating Oil and which product should be afforded the preference in purchasing.
Note 1 to Paragraph (Other lubricants within this designated product category can compete with similar other lubricants with recycled content. According to the Resource Conservation and Recovery Act of 1976, section 6002, Federal agencies must give preference in their purchasing programs for the U.S. Environmental Protection Agency's CPG-designated Vehicular Products: Re-Refined Lubricating Oil containing recovered materials as products. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.11.
§ 3201.138 - Phase change materials.
(a) Definition. Phase change materials are products that are capable of absorbing and releasing large amounts of thermal energy by freezing and thawing at certain temperatures. Heat is absorbed or released when the material changes from solid to liquid and vice versa. Applications may include, but are not limited to, conditioning of buildings, medical applications, thermal energy storage, or cooling of food. Materials such as animal fats and plant oils that melt at desirable temperatures are typically used to make products in this category.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 71 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased phase change materials. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased phase change materials.
§ 3201.22 - Fertilizers.
(a) Definition. Products formulated or processed to provide nutrients for plant growth and/or beneficial bacteria to convert nutrients into plant usable forms. Biobased fertilizers, which are likely to consist mostly of biobased components, may include both biobased and chemical components.
Note to paragraph (Biobased fertilizers, as well as other fertilizers, may be made with recycled hazardous waste. Such fertilizers need to meet applicable land disposal restriction standards for any hazardous constituents they contain, as required under 40 CFR 266.20(d).
(b) Minimum biobased content. The preferred procurement product must have a biobased content of at least 71 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased fertilizers. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased fertilizers.
(d) Determining overlap with an EPA-designated recovered content product. Qualifying biobased products that fall under this item may, in some cases, overlap with the EPA-designated recovered content product: Fertilizer. USDA is requesting that manufacturers of these qualifying biobased products provide information on the BioPreferred Web site of qualifying biobased products about the intended uses of the product, information on whether or not the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether or not a qualifying biobased product overlaps with EPA-designated fertilizer product and which product should be afforded the preference in purchasing.
Note to paragraph (Fertilizers within this designated item can be made with recycled materials. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency designated fertilizers containing recovered materials as items for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.15. EPA provides recovered materials content recommendations for fertilizers in the Recovered Materials Advisory Notice (RMAN) published for these products. The RMAN recommendations can be found by accessing EPA's Web site http://www.epa.gov/epaoswer/non-hw/procure/products.htm and then clicking on the appropriate product name.
§ 3201.139 - Playground and athletic surface materials.
(a) Definition. Playground and athletic surface materials are products that are designed for use on playgrounds and athletic surfaces. Examples include materials that are applied to the surfaces of playgrounds, athletic fields, and other sports surfaces to enhance or change the color or general appearance of the surface and to provide safety and/or performance benefits. Such materials include, but are not limited to, top coatings, primers, line marking paints, and rubberized pellets that are used on athletic courts, tracks, natural or artificial turf, and other playing surfaces. This category does not include the artificial turf or surface itself, as that is included in the carpets product category.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 22 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased playground and athletic surface materials. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased playground and athletic surface materials.
(d) Determining overlap with a designated product category in the EPA's CPG program. Qualifying products within this product category may overlap with the EPA's CPG-designated recovered content product categories of Parks and Recreation Products: Playground Surfaces and Running Tracks. USDA is requesting that manufacturers of these qualifying biobased products provide information on the BioPreferred Program's website about the intended uses of the product, information on whether the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether a qualifying biobased product overlaps with the EPA's CPG-designated product categories of Parks and Recreation Products: Playground Surfaces and Running Tracks and which product should be afforded the preference in purchasing.
Note 1 to Paragraph (Playground and athletic surface materials within this designated product category can compete with similar playground and athletic surface materials with recycled content. According to the Resource Conservation and Recovery Act of 1976, section 6002, Federal agencies must give preference in their purchasing programs for the U.S. Environmental Protection Agency's CPG-designated product categories of Parks and Recreation Products: Playground Surfaces and Running Tracks containing recovered materials as products. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.10.
§ 3201.140 - Powder coatings.
(a) Definition. Powder coatings are polymer resin systems that are combined with stabilizers, curatives, pigments, and other additives and ground into a powder. These coatings are applied electrostatically to metallic surfaces and then cured under heat. Powder coatings are typically used for coating metals, such as vehicle and bicycle parts, household appliances, and aluminum extrusions.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 34 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased powder coatings. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased powder coatings.
§ 3201.141 - Product packaging.
(a) Definition. Product packaging items are used to protect, handle, and retain a product during activities related but not limited to its storage, distribution, sale, and use. These containers are typically designed to be used once. This category excludes packing and insulating materials and shopping and trash bags.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 25 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased product packaging. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased product packaging.
(d) Determining overlap with a designated product category in the EPA's CPG program. Qualifying products within this product category may overlap with the EPA's CPG-designated recovered content product category of Paper Products: Paperboard and Packaging. USDA is requesting that manufacturers of these qualifying biobased products provide information on the BioPreferred Program's website about the intended uses of the product, information on whether the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether a qualifying biobased product overlaps with the EPA's CPG-designated product category of Paper Products: Paperboard and Packaging and which product should be afforded the preference in purchasing.
Note 1 to Paragraph (Product packaging within this designated product category can compete with similar product packaging with recycled content. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency CPG-designated Paper Products: Paperboard and Packaging containing recovered materials as products for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.10.
§ 3201.142 - Rugs and floor mats.
(a) Definition. Rugs or floor mats are floor coverings that are used for decorative or ergonomic purposes and that are not attached to the floor. This category includes items such as area rugs, rug runners, chair mats, and bathroom and kitchen mats. This category excludes products composed of woven, tufted, or knitted fiber and a backing system because these products fall under the “Carpets” product category.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 23 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased rugs and floor mats. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased rugs and floor mats.
(d) Determining overlap with a designated product category in the EPA's CPG program. Qualifying products within this product category may overlap with the EPA's CPG-designated recovered content product category of Miscellaneous Products: Mats. USDA is requesting that manufacturers of these qualifying biobased products provide information on the BioPreferred Program's website about the intended uses of the product, information on whether the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether a qualifying biobased product overlaps with the EPA's CPG-designated product category of Miscellaneous Products: Mats and which product should be afforded the preference in purchasing.
Note 1 to Paragraph (Rugs and floor mats within this designated product category can compete with similar rugs or floor mats with recycled content. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency CPG-designated Miscellaneous Products: Mats containing recovered materials as products for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.17.
§ 3201.143 - Shopping and trash bags.
(a) Definition. Shopping and trash bags are open-ended bags that are typically made of thin, flexible film and are used for containing and transporting items such as consumer goods and waste. Examples include trash bags, can liners, shopping or grocery bags, pet waste bags, compost bags, and yard waste bags. This category does not include product packaging, disposable containers, or semi-durable and non-durable films.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 22 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased shopping and trash bags. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased shopping and trash bags.
(d) Determining overlap with a designated product category in the EPA's CPG program. Qualifying products within this product category may overlap with the EPA's CPG-designated recovered content product category of Non-Paper Office Products: Plastic Trash Bags. USDA is requesting that manufacturers of these qualifying biobased products provide information on the BioPreferred Program's website about the intended uses of the product, information on whether the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether a qualifying biobased product overlaps with the EPA's CPG-designated product category of Non-Paper Office Products: Trash Bags and which product should be afforded the preference in purchasing.
Note 1 to Paragraph (Shopping and trash bags within this designated product category can compete with similar shopping and trash bags with recycled content. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency CPG-designated Non-Paper Office Products: Trash Bags containing recovered materials as products for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.17.
§ 3201.144 - Soil amendments.
(a) Definition. Soil amendments are materials that enhance the physical characteristics of soil through improving water retention or drainage, improving nutrient cycling, promoting microbial growth, or changing the soil's pH. This category excludes foliar sprays and chemical fertilizers.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 72 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased soil amendments. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased soil amendments.
(d) Determining overlap with a designated product category in the EPA's CPG program. Qualifying products within this product category may overlap with the EPA's CPG-designated recovered content product categories of Landscaping Products: Compost Made From Recovered Organic Materials and Landscaping Products: Fertilizer Made From Recovered Organic Materials. USDA is requesting that manufacturers of these qualifying biobased products provide information on the BioPreferred Program's website about the intended uses of the product, information on whether the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether a qualifying biobased product overlaps with the EPA's CPG-designated product categories Landscaping Products: Compost Made From Recovered Organic Materials and Landscaping Products: Fertilizer Made From Recovered Organic Materials and which product should be afforded the preference in purchasing.
Note 1 to Paragraph (Soil amendments within this designated product category can compete with similar soil amendments with recycled content. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency CPG-designated Landscaping Products: Compost Made From Recovered Organic Materials and Landscaping Products: Fertilizer Made From Recovered Organic Materials containing recovered materials as products for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.15.
§ 3201.145 - Surface guards, molding, and trim.
(a) Definition. Surface guards, molding, and trim products are typically used during construction or manufacturing. These products are designed to protect surfaces, such as walls and floors, from damage or to cover the exposed edges of furniture or floors.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 26 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased surface guards, molding, and trim. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased surface guards, molding, and trim.
§ 3201.146 - Toys and sporting gear.
(a) Definition. Toys and sporting gear are products that are designed for indoor or outdoor recreational use including, but not limited to, toys; games; and sporting equipment and accessories such as balls, bats, racquets, nets, and bicycle seats. This category does not include products such as cleaners, lubricants, and oils that are used to maintain or clean toys and sporting gear.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 32 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased toys and sporting gear. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased toys and sporting gear.
§ 3201.147 - Traffic and zone marking paints.
(a) Definition. Traffic and zone marking paints are products that are formulated and marketed for marking and striping parking lots, roads, streets, highways, or other traffic surfaces including, but not limited to, curbs, crosswalks, driveways, sidewalks, and airport runways.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 30 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased traffic and zone marking paints. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased traffic and zone marking paints.
§ 3201.148 - Transmission fluids.
(a) Definition. Transmission fluids are liquids that lubricate and cool the moving parts in a transmission to prevent wearing and to ensure smooth performance.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 60 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased transmission fluids. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased transmission fluids.
(d) Determining overlap with a designated product category in the EPA's CPG program. Qualifying products within this product category may overlap with the EPA's CPG-designated recovered content product category of Vehicular Products: Re-refined Lubricating Oil. USDA is requesting that manufacturers of these qualifying biobased products provide information on the BioPreferred Program's website about the intended uses of the product, information on whether the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether a qualifying biobased product overlaps with the EPA's CPG-designated Vehicular Products: Re-Refined Lubricating Oil and which product should be afforded the preference in purchasing.
Note 1 to Paragraph (Transmission fluids within this designated product category can compete with similar transmission fluids with recycled content. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency CPG-designated product categories Vehicular Products: Re-Refined Lubricating Oil containing recovered materials as products for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.11.
§ 3201.23 - Sorbents.
(a) Definition. Materials formulated for use in the cleanup and bioremediation of oil and chemical spills, the disposal of liquid materials, or the prevention of leakage or leaching in maintenance applications, shop floors, and fuel storage areas.
(b) Minimum biobased content. The preferred procurement product must have a biobased content of at least 89 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased sorbents. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased sorbents.
(d) Determining overlap with an EPA-designated recovered content product. Qualifying biobased products that fall under this item may, in some cases, overlap with the EPA-designated recovered content product: Sorbents. USDA is requesting that manufacturers of these qualifying biobased products provide information on the BioPreferred Web site of qualifying biobased products about the intended uses of the product, information on whether or not the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether or not a qualifying biobased product overlaps with EPA-designated sorbents and which product should be afforded the preference in purchasing.
Note to paragraph (Sorbents within this designated item can be made with recycled materials. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency designated sorbents containing recovered materials as items for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.17. EPA provides recovered materials content recommendations for sorbents in the Recovered Materials Advisory Notice (RMAN) published for these products. The RMAN recommendations can be found by accessing EPA's Web site http://www.epa.gov/epaoswer/non-hw/procure/products.htm and then clicking on the appropriate product name.
§ 3201.149 - Wall coverings.
(a) Definition. Wall coverings are materials that are applied to walls using an adhesive. This category includes, but is not limited to, wallpaper, vinyl wall coverings, and wall fabrics. This category excludes all types of paints or coatings.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 62 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased wall coverings. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased wall coverings.
§ 3201.24 - Graffiti and grease removers.
(a) Definition. Industrial solvent products formulated to remove automotive, industrial, or kitchen soils and oils, including grease, paint, and other coatings, from hard surfaces.
(b) Minimum biobased content. The preferred procurement product must have a biobased content of at least 34 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. If the finished product is to be diluted before use, the biobased content of the remover must be determined before dilution.
(c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying graffiti and grease removers. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased graffiti and grease removers.
§ 3201.25 - 2-Cycle engine oils.
(a) Definition. Lubricants designed for use in 2-cycle engines to provide lubrication, decreased spark plug fouling, reduced deposit formation, and/or reduced engine wear.
(b) Minimum biobased content. The preferred procurement product must have a biobased content of at least 34 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased 2-cycle engine oils. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased 2-cycle engine oils.
§ 3201.26 - Lip care products.
(a) Definition. Personal care products formulated to replenish the moisture and/or prevent drying of the lips.
(b) Minimum biobased content. The preferred procurement product must have a biobased content of at least 82 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased lip care products. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased lip care products.
§ 3201.27 - Films.
(a) Definition. (1) Products that are used in packaging, wrappings, linings, and other similar applications.
(2) Films for which preferred procurement applies are:
(i) Semi-durable films. Films that are designed to resist water, ammonia, and other compounds, to be re-used, and to not readily biodegrade. Products in this item are typically used in the production of bags and packaging materials.
(ii) Non-durable films. Films that are intended for single use for short-term storage or protection before being discarded. Non-durable films that are designed to have longer lives when used are included in this item.
(b) Minimum biobased content. The minimum biobased content for all films shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. The applicable minimum biobased contents are:
(1) Semi-durable films—45 percent.
(2) Non-durable films—85 percent.
(c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased semi-durable and non-durable films. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased semi-durable and non-durable films.
(d) Determining overlap with an EPA-designated recovered content product. Qualifying products within the semi-durable films subcategory may overlap with the EPA-designated recovered content product: Plastic trash bags. USDA is requesting that manufacturers of these qualifying biobased products provide information for the BioPreferred Web site of qualifying biobased products about the intended uses of the product, information on whether or not the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether or not a qualifying biobased product overlaps with EPA-designated plastic trash bags and which product should be afforded the preference in purchasing.
Note to paragraph (Biobased semi-durable film products within this designated item can compete with plastic trash bag products with recycled content. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency designated plastic trash bags containing recovered materials as items for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.16. EPA provides recovered materials content recommendations for plastic trash bags in the May 1, 1995, Recovered Materials Advisory Notice (RMAN I). The RMAN recommendations can be found on EPA's Web site http://www.epa.gov/epaoswer/non-hw/procure/products.htm and then clicking on the appropriate product name.
§ 3201.28 - Stationary equipment hydraulic fluids.
(a) Definition. Fluids formulated for use in stationary hydraulic equipment systems that have various mechanical parts, such as cylinders, pumps, valves, pistons, and gears, that are used for the transmission of power (and also for lubrication and/or wear, rust, and oxidation protection).
(b) Minimum biobased content. The preferred procurement product must have a biobased content of at least 44 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased stationary equipment hydraulic fluids. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased stationary equipment hydraulic fluids.
(d) Determining overlap with an EPA-designated recovered content product. Qualifying biobased products that fall under this item may, in some cases, overlap with the EPA-designated recovered content product: Re-refined lubricating oils. USDA is requesting that manufacturers of these qualifying biobased products provide information for the BioPreferred Web site of qualifying biobased products about the intended uses of the product, information on whether or not the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether or not a qualifying biobased product overlaps with EPA-designated re-refined lubricating oils and which product should be afforded the preference in purchasing.
Note to paragraph (Stationary equipment hydraulic fluid products within this designated item can compete with hydraulic fluid products with recycled content. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency designated re-refined lubricating oils containing recovered materials as items for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.11. EPA provides recovered materials content recommendations for re-refined lubricating oils in the May 1, 1995, Recovered Materials Advisory Notice (RMAN I). The RMAN recommendations can be found by accessing EPA's Web site http://www.epa.gov/epaoswer/non-hw/procure/products.htm and then clicking on the appropriate product name.
§ 3201.29 - Disposable cutlery.
(a) Definition. Hand-held, disposable utensils designed for one-time use in eating food.
(b) Minimum biobased content. The preferred procurement product must have a biobased content of at least 48 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased disposable cutlery. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased disposable cutlery.
§ 3201.30 - Glass cleaners.
(a) Definition. Cleaning products designed specifically for use in cleaning glass surfaces, such as windows, mirrors, car windows, and computer monitors.
(b) Minimum biobased content. The preferred procurement product must have a biobased content of at least 49 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. If the finished product is to be diluted before use, the biobased content of the cleaner must be determined before dilution.
(c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased glass cleaners. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased glass cleaners.
§ 3201.31 - Greases.
(a) Definitions. (1) Lubricants composed of oils thickened to a semisolid or solid consistency using soaps, polymers or other solids, or other thickeners.
(2) Greases for which preferred procurement applies are:
(i) Food grade greases. Lubricants that are designed for use on food-processing equipment as a protective anti-rust film, as a release agent on gaskets or seals of tank closures, or on machine parts and equipment in locations in which there is exposure of the lubricated part to food.
(ii) Multipurpose greases. Lubricants that are designed for general use.
(iii) Rail track greases. Lubricants that are designed for use on railroad tracks or heavy crane tracks.
(iv) Truck greases. Lubricants that are designed for use on the fifth wheel of tractor trailer trucks onto which the semi-trailer rests and pivots.
(v) Greases not elsewhere specified. Lubricants that meet the general definition of greases as defined in paragraph (a)(1) of this section, but are not otherwise covered by paragraphs (a)(2)(i) through (iv) of this section.
(b) Minimum biobased content. The minimum biobased content for all greases shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. The applicable minimum biobased contents are:
(1) Food grade grease—42 percent.
(2) Multipurpose grease—72 percent.
(3) Rail track grease—30 percent.
(4) Truck grease—71 percent.
(5) Greases not elsewhere specified—75 percent.
(c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased greases. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased greases.
§ 3201.32 - Dust suppressants.
(a) Definition. Products formulated to reduce or eliminate the spread of dust associated with gravel roads, dirt parking lots, or similar sources of dust, including products used in equivalent indoor applications.
(b) Minimum biobased content. The preferred procurement product must have a biobased content of at least 85 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. If the finished product is to be diluted before use, the biobased content of the suppressant must be determined before dilution.
(c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased dust suppressants. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased dust suppressants.
§ 3201.33 - Carpets.
(a) Definition. Floor coverings composed of woven, tufted, or knitted fiber and a backing system.
(b) Minimum biobased content. The preferred procurement product must have a biobased content of at least 7 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased carpet. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased carpet.
(d) Determining overlap with an EPA-designated recovered content product. Qualifying biobased products that fall under this item may, in some cases, overlap with the EPA-designated recovered content product: Carpets (polyester). USDA is requesting that manufacturers of these qualifying biobased products provide information for the BioPreferred Web site of qualifying biobased products about the intended uses of the product, information on whether or not the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether or not a qualifying biobased product overlaps with EPA-designated carpets (polyester) and which product should be afforded the preference in purchasing.
Note to paragraph (Biobased carpets within this designated item can compete with polyester carpet products with recycled content. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency designated carpets (polyester) containing recovered materials as items for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.12. EPA provides recovered materials content recommendations for carpets (polyester) in the May 1, 1995, Recovered Materials Advisory Notice (RMAN I). The RMAN recommendations can be found on EPA's Web site http://www.epa.gov/epaoswer/non-hw/procure/products.htm and then clicking on the appropriate product name.
§ 3201.34 - Carpet and upholstery cleaners.
(a) Definition. (1) Cleaning products formulated specifically for use in cleaning carpets and upholstery, through a dry or wet process, found in locations such as houses, cars, and workplaces.
(2) Carpet and upholstery cleaners for which preferred procurement applies are:
(i) General purpose cleaners. Carpet and upholstery cleaners formulated for use in cleaning large areas such as the carpet in an entire room or the upholstery on an entire piece of furniture.
(ii) Spot removers. Carpet and upholstery cleaners formulated for use in removing spots or stains in a small confined area.
(b) Minimum biobased content. The minimum biobased content for all carpet and upholstery cleaners shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. The applicable minimum biobased contents are:
(1) General purpose cleaners—54 percent.
(2) Spot removers—7 percent.
(c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased carpet and upholstery cleaners. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased carpet and upholstery cleaners.
§ 3201.35 - Bathroom and spa cleaners.
(a) Definition. Products that are designed to clean and/or prevent deposits on surfaces found in bathrooms and spas including, but not necessarily limited to, bath tubs and spas, shower stalls, shower doors, shower curtains, and bathroom walls, floors, doors, and counter and sink tops. Products in this item may be designed to be applied to a specific type of surface or to multiple surface types. They are available both in concentrated and ready-to-use forms.
(b) Minimum biobased content. The preferred procurement product must have a minimum biobased content of at least 74 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased bathroom and spa cleaners. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased bathroom and spa cleaners.
§ 3201.36 - Concrete and asphalt release fluids.
(a) Definition. Products that are designed to provide a lubricating barrier between the composite surface materials (e.g., concrete or asphalt) and the container (e.g., wood or metal forms, truck beds, roller surfaces).
(b) Minimum biobased content. The preferred procurement product must have a minimum biobased content of at least 87 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased concrete and asphalt release fluids. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased concrete and asphalt release fluids.
§ 3201.37 - De-Icers.
(a) Definition. Chemical products (e.g., salts, fluids) that are designed to aid in the removal of snow and/or ice, and/or in the prevention of the buildup of snow and/or ice, by lowering the freezing point of water.
(b) Minimum biobased content. The preferred procurement product must have a minimum biobased content of at least 93 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance dates. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased de-icers. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased de-icers.
§ 3201.38 - Firearm cleaners, lubricants, and protectants.
(a) Definition. Products that are designed to care for firearms by cleaning, lubricating, protecting, or any combination thereof. Examples include products that are designed for use in firearms to reduce the friction and wear between the moving parts of a firearm, to keep the weapon clean, and/or to prevent the formation of deposits that could cause the weapon to jam.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 32 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance dates. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased firearm cleaners, lubricants, and protectants. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased firearm cleaners, lubricants, and protectants.
§ 3201.39 - Floor strippers.
(a) Definition. Products that are formulated to loosen waxes, resins, or varnishes from floor surfaces. They can be in either liquid or gel form, and may also be used with or without mechanical assistance.
(b) Minimum biobased content. The preferred procurement product must have a minimum biobased content of at least 78 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased floor strippers. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased floor strippers.
§ 3201.40 - Laundry products.
(a) Definitions. (1) Products that are designed to clean, condition, or otherwise affect the quality of the laundered material. Such products include but are not limited to laundry detergents, bleach, stain removers, and fabric softeners.
(2) Laundry products for which preferred procurement applies are:
(i) Pretreatment/spot removers. These are laundry products specifically used to pretreat laundry to assist in the removal of spots and stains during laundering.
(ii) General purpose laundry products. These are laundry products used for regular cleaning activities.
(iii) Dryer sheets. These are small sheets that are added to laundry in clothes dryers to eliminate static cling, soften fabrics, or otherwise improve the characteristics of the fabric.
(b) Minimum biobased content. The minimum biobased content shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. The applicable minimum biobased contents for the preferred procurement product are:
(1) Pretreatment/spot removers—46 percent.
(2) General purpose laundry products—34 percent.
(3) Dryer sheets—90 percent.
(c) Preference compliance dates. (1) No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for those qualifying biobased laundry products specified in paragraphs (a)(2)(i) and (ii) of this section. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased laundry products.
(2) No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for those qualifying biobased laundry products specified in paragraph (a)(2)(iii) of this section. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased laundry products.
§ 3201.41 - Metalworking fluids.
(a) Definition. (1) Fluids that are designed to provide cooling, lubrication, corrosion prevention, and reduced wear on the contact parts of machinery used for metalworking operations such as cutting, drilling, grinding, machining, and tapping.
(2) Metalworking fluids for which preferred procurement applies are:
(i) Straight oils. Metalworking fluids that are not diluted with water prior to use and are generally used for metalworking processes that require lubrication rather than cooling.
(ii) General purpose soluble, semi-synthetic, and synthetic oils. Metalworking fluids formulated for use in a re-circulating fluid system to provide cooling, lubrication, and corrosion prevention when applied to metal feedstock during normal grinding and machining operations.
(iii) High performance soluble, semi-synthetic, and synthetic oils. Metalworking fluids formulated for use in a re-circulating fluid system to provide cooling, lubrication, and corrosion prevention when applied to metal feedstock during grinding and machining operations involving unusually high temperatures or corrosion potential.
(b) Minimum biobased content. The minimum biobased content shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. The applicable minimum biobased contents for the preferred procurement product are:
(1) Straight oils—66 percent.
(2) General purpose soluble, semi-synthetic, and synthetic oils—57 percent.
(3) High performance soluble, semi-synthetic, and synthetic oils—40 percent.
(c) Preference compliance date—(1) Straight oils. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased metalworking fluids—straight oils. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased metalworking fluids—straight oils.
(2) General purpose soluble, semi-synthetic, and synthetic oils. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased metalworking fluids—general purpose soluble, semi-synthetic, and synthetic oils. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased metalworking fluids—general purpose soluble, semi-synthetic, and synthetic oils.
(3) High performance soluble, semi-synthetic, and synthetic oils. Determination of the preference compliance date for metalworking fluids—high performance soluble, semi-synthetic, and synthetic oils is deferred until USDA identifies two or more manufacturers of biobased products within this subcategory. At that time, USDA will publish a document in the
§ 3201.42 - Wood and concrete sealers.
(a) Definition. (1) Products that are penetrating liquids formulated to protect wood and/or concrete, including masonry and fiber cement siding, from damage caused by insects, moisture, and decaying fungi and to make surfaces water resistant.
(2) Wood and concrete sealers for which preferred procurement applies are:
(i) Penetrating liquids. Wood and concrete sealers that are formulated to penetrate the outer surface of the substrate.
(ii) Membrane concrete sealers. Concrete sealers that are formulated to form a protective layer on the surface of the substrate.
(b) Minimum biobased content. The minimum biobased content shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. The applicable minimum biobased contents for the preferred procurement product are:
(1) Penetrating liquids—79 percent.
(2) Membrane concrete sealers—11 percent.
(c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased wood and concrete sealers. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased wood and concrete sealers.
§ 3201.43 - Chain and cable lubricants.
(a) Definition. Products designed to provide lubrication in such applications as bar and roller chains, sprockets, and wire ropes and cables. Products may also prevent rust and corrosion in these applications.
(b) Minimum biobased content. The preferred procurement product must have a minimum biobased content of at least 77 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than October 27, 2010, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased chain and cable lubricants. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased chain and cable lubricants.
§ 3201.44 - Corrosion preventatives.
(a) Definition. Products designed to prevent the deterioration (corrosion) of metals.
(b) Minimum biobased content. The preferred procurement product must have a minimum biobased content of at least 53 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than October 27, 2010, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased corrosion preventatives. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased corrosion preventatives.
§ 3201.45 - Food cleaners.
(a) Definition. Anti-microbial products designed to clean the outer layer of various food products, such as fruit, vegetables, and meats.
(b) Minimum biobased content. The preferred procurement product must have a minimum biobased content of at least 53 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than October 27, 2010, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased food cleaners. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased food cleaners.
§ 3201.46 - Forming lubricants.
(a) Definition. Products designed to provide lubrication during metalworking applications that are performed under extreme pressure. Such metalworking applications include tube bending, stretch forming, press braking, and swaging.
(b) Minimum biobased content. The preferred procurement product must have a minimum biobased content of at least 68 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than October 27, 2010, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased forming lubricants. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased forming lubricants.
§ 3201.47 - Gear lubricants.
(a) Definition. Products, such as greases or oils, that are designed to reduce friction when applied to a toothed machine part (such as a wheel or cylinder) that meshes with another toothed part to transmit motion or to change speed or direction.
(b) Minimum biobased content. The preferred procurement product must have a minimum biobased content of at least 58 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than October 27, 2010, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased gear lubricants. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of gear lubricants.
(d) Determining overlap with an EPA-designated recovered content product. Qualifying biobased products that fall under this item may, in some cases, overlap with the following EPA-designated recovered content product: Lubricating oils containing re-refined oil. USDA is requesting that manufacturers of these qualifying biobased products provide information for the BioPreferred Web site of qualifying biobased products about the intended uses of the product, information on whether or not the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether or not a qualifying biobased product overlaps with EPA-designated re-refined lubricating oils and which product should be afforded the preference in purchasing.
Note to paragraph (Biobased gear lubricant products within this designated item can compete with similar gear lubricant products with recycled content. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency designated re-refined lubricating oils containing recovered materials as items for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.11.
§ 3201.48 - General purpose household cleaners.
(a) Definition. Products designed to clean multiple common household surfaces. This designated item does not include products that are formulated for use as disinfectants. Task-specific cleaning products, such as spot and stain removers, upholstery cleaners, bathroom cleaners, glass cleaners, etc., are not included in this item.
(b) Minimum biobased content. The preferred procurement product must have a minimum biobased content of at least 39 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than October 27, 2010, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased general purpose household cleaners. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased general purpose household cleaners.
§ 3201.49 - Industrial cleaners.
(a) Definition. Products used to remove contaminants, such as adhesives, inks, paint, dirt, soil, and grease, from parts, products, tools, machinery, equipment, vessels, floors, walls, and other production-related work areas. The cleaning products within this item are usually solvents, but may take other forms. They may be used in either straight solution or diluted with water in pressure washers, or in hand wiping applications in industrial or manufacturing settings, such as inside vessels. Task-specific cleaners used in industrial settings, such as parts wash solutions, are not included in this definition.
(b) Minimum biobased content. The preferred procurement product must have a minimum biobased content of at least 41 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than October 27, 2010, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased industrial cleaners. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased industrial cleaners.
§ 3201.50 - Multipurpose cleaners.
(a) Definition. Products used to clean dirt, grease, and grime from a variety of items in both industrial and domestic settings. This designated item does not include products that are formulated for use as disinfectants.
(b) Minimum biobased content. The preferred procurement product must have a minimum biobased content of at least 56 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than October 27, 2010, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased multipurpose cleaners. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased multipurpose cleaners.
§ 3201.51 - Parts wash solutions.
(a) Definition. Products that are designed to clean parts in manual or automatic cleaning systems. Such systems include, but are not limited to, soak vats and tanks, cabinet washers, and ultrasonic cleaners.
(b) Minimum biobased content. The preferred procurement product must have a minimum biobased content of at least 65 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than October 27, 2010, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased parts wash solutions. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased parts wash solutions.
§ 3201.52 - Disposable tableware.
(a) Definition. Products made from, or coated with, plastic resins and used in dining, such as drink ware and dishware, including but not limited to cups, plates, bowls, and serving platters, and that are designed for one-time use. This item does not include disposable cutlery, which is a separate item.
(b) Minimum biobased content. The preferred procurement product must have a minimum biobased content of at least 72 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than October 18, 2011, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased disposable tableware. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased disposable tableware.
§ 3201.53 - Expanded polystyrene (EPS) foam recycling products.
(a) Definition. Products formulated to dissolve EPS foam to reduce the volume of recycled or discarded EPS items.
(b) Minimum biobased content. The preferred procurement product must have a minimum biobased content of at least 90 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than October 18, 2011, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased EPS foam recycling products. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased EPS foam recycling products.
§ 3201.54 - Heat transfer fluids.
(a) Definition. Products with high thermal capacities used to facilitate the transfer of heat from one location to another, including coolants or refrigerants for use in HVAC applications, internal combustion engines, personal cooling devices, thermal energy storage, or other heating or cooling closed-loops.
(b) Minimum biobased content. The preferred procurement product must have a minimum biobased content of at least 89 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than October 18, 2011, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased heat transfer fluids. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased heat transfer fluids.
§ 3201.55 - Ink removers and cleaners.
(a) Definition. Chemical products designed to remove ink, haze, glaze, and other residual ink contaminants from the surfaces of equipment, such as rollers, used in the textile and printing industries.
(b) Minimum biobased content. The preferred procurement product must have a minimum biobased content of at least 79 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than October 18, 2011, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased ink removers and cleaners. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased ink removers and cleaners.
§ 3201.56 - Mulch and compost materials.
(a) Definition. Products designed to provide a protective covering placed over the soil, primarily to keep down weeds and to improve the appearance of landscaping. Compost is the aerobically decomposed remnants of organic materials used in gardening and agriculture as a soil amendment, and commercially by the landscaping and container nursery industries.
(b) Minimum biobased content. The preferred procurement product must have a minimum biobased content of at least 95 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than October 18, 2011, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased mulch and compost materials. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased mulch and compost materials.
(d) Determining overlap with an EPA-designated recovered content product. Qualifying products within this item may overlap with the EPA-designated recovered content product: Landscaping products—“compost” and “hydraulic mulch”. USDA is requesting that manufacturers of these qualifying biobased products provide information on the USDA Web site of qualifying biobased products about the intended uses of the product, information on whether or not the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether or not a qualifying biobased product overlaps with EPA-designated landscaping products and which product should be afforded the preference in purchasing.
Note to paragraph (Biobased mulch and compost materials within this designated item can compete with similar landscaping products with recycled content. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency designated landscaping products containing recovered materials as items for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.15.
§ 3201.57 - Multipurpose lubricants.
(a) Definition. Products designed to provide lubrication under a variety of conditions and in a variety of industrial settings to prevent friction or rust. Greases, which are lubricants composed of oils thickened to a semisolid or solid consistency using soaps, polymers or other solids, or other thickeners, are not included in this item. In addition, task-specific lubricants, such as chain and cable lubricants and gear lubricants, are not included in this item.
(b) Minimum biobased content. The preferred procurement product must have a minimum biobased content of at least 88 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than October 18, 2011, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased multipurpose lubricants. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased multipurpose lubricants.
(d) Determining overlap with an EPA-designated recovered content product. Qualifying products within this item may overlap with the EPA-designated recovered content product: Re-refined lubricating oils. USDA is requesting that manufacturers of these qualifying biobased products provide information on the BioPreferred Web site about the intended uses of the product, information on whether or not the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether or not a qualifying biobased product overlaps with EPA-designated re-refined lubricating oils and which product should be afforded the preference in purchasing.
Note to paragraph (Biobased multipurpose lubricant products within this designated item can compete with similar multipurpose lubricant products with recycled content. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency designated re-refined lubricating oils containing recovered materials as items for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.11.
§ 3201.58 - [Reserved]
§ 3201.59 - Topical pain relief products.
(a) Definition. Products that can be balms, creams and other topical treatments used for the relief of muscle, joint, headache, and nerve pain, as well as sprains, bruises, swelling, and other aches.
(b) Minimum biobased content. The preferred procurement product must have a minimum biobased content of at least 91 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than October 18, 2011, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased topical pain relief products. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased topical pain relief products.
§ 3201.60 - Turbine drip oils.
(a) Definition. Products that are lubricants for use in drip lubrication systems for water well line shaft bearings, water turbine bearings for irrigation pumps, and other turbine bearing applications.
(b) Minimum biobased content. The preferred procurement product must have a minimum biobased content of at least 87 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than October 18, 2011, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased turbine drip oils. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased turbine drip oils.
§ 3201.61 - Animal repellents.
(a) Definition. Products used to aid in deterring animals that cause destruction to plants and/or property.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 79 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 23, 2012, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased animal repellents. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased animal repellents.
§ 3201.62 - Bath products.
(a) Definition. Personal hygiene products including bar soaps, liquids, or gels that are referred to as body washes, body shampoos, or cleansing lotions, but excluding products marketed as hand cleaners and/or hand sanitizers.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 61 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 23, 2012, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased bath products. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased bath products.
§ 3201.63 - Bioremediation materials.
(a) Definition. Dry or liquid solutions (including those containing bacteria or other microbes but not including sorbent materials) used to clean oil, fuel, and other hazardous spill sites.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 86 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 23, 2012, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased bioremediation materials. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased bioremediation materials.
§ 3201.64 - Compost activators and accelerators.
(a) Definition. Products in liquid or powder form designed to be applied to compost piles to aid in speeding up the composting process and to ensure successful compost that is ready for consumer use.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 95 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 23, 2012, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased compost activators and accelerators. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased compost activators and accelerators.
§ 3201.65 - Concrete and asphalt cleaners.
(a) Definition. Chemicals used in concrete etching as well as to remove petroleum-based soils, lubricants, paints, mastics, organic soils, rust, and dirt from concrete, asphalt, stone and other hard porous surfaces. Products within this item include only those marketed for use in commercial or residential construction or industrial applications.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 70 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 23, 2012, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased concrete and asphalt cleaners. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased concrete and asphalt cleaners.
§ 3201.66 - Cuts, burns, and abrasions ointments.
(a) Definition. Products designed to aid in the healing and sanitizing of scratches, cuts, bruises, abrasions, sun damaged skin, tattoos, rashes and other skin conditions.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 84 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 23, 2012, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased cuts, burns, and abrasions ointments. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased cuts, burns, and abrasions ointments.
§ 3201.67 - Dishwashing products.
(a) Definition. Soaps and detergents used for cleaning and clean rinsing of tableware in either hand washing or dishwashing.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 58 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 23, 2012, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased dishwashing products. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased dishwashing products.
§ 3201.68 - Erosion control materials.
(a) Definition. Woven or non-woven fiber materials manufactured for use on construction, demolition, or other sites to prevent wind or water erosion of loose earth surfaces, which may be combined with seed and/or fertilizer to promote growth.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 77 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 23, 2012, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased erosion control materials. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased erosion control materials.
§ 3201.69 - Floor cleaners and protectors.
(a) Definition. Cleaning solutions for either direct application or use in floor scrubbers for wood, vinyl, tile, or similar hard surface floors. Products within this item are marketed specifically for use on industrial, commercial, and/or residential flooring.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 77 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 23, 2012, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased floor cleaners and protectors. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased floor cleaners and protectors.
§ 3201.70 - Hair care products.
(a) Definitions. (1) Personal hygiene products specifically formulated for hair cleaning and treating applications, including shampoos and conditioners.
(2) Hair care products for which Federal preferred procurement applies are:
(i) Shampoos. These are products whose primary purpose is cleaning hair. Products that contain both shampoos and conditioners are included in this subcategory because the primary purpose of these products is cleaning the hair.
(ii) Conditioners. These are products whose primary purpose is treating hair to improve the overall condition of hair.
(b) Minimum biobased content. The minimum biobased content for all hair care products shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. The applicable minimum biobased contents for the Federal preferred procurement products are:
(1) Shampoos—66 percent.
(2) Conditioners—78 percent.
(c) Preference compliance date. No later than July 23, 2012, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased hair care products. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased hair care products.
§ 3201.71 - Interior paints and coatings.
(a) Definition. (1) Pigmented liquids, formulated for use indoors, that dry to form a film and provide protection and added color to the objects or surfaces to which they are applied.
(2) Interior paints and coatings products for which Federal preferred procurement applies are:
(i) Interior latex and waterborne alkyd paints and coatings.
(ii) Interior oil-based and solventborne alkyd paints and coatings.
(b) Minimum biobased content. The minimum biobased content for all interior paints and coatings products shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. The applicable minimum biobased contents for the Federal preferred procurement products are:
(1) Interior latex and waterborne alkyd paints and coatings—20 percent.
(2) Interior oil-based and solventborne alkyd paints and coatings—67 percent.
(c) Preference compliance date. No later than July 23, 2012, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased interior paints and coatings. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased interior paints and coatings.
(d) Determining overlap with an EPA-designated recovered content product. Qualifying biobased products within the interior latex and waterborne alkyd paints and coatings subcategory may, in some cases, overlap with the EPA-designated recovered content products: Reprocessed latex paints and consolidated latex paints. USDA is requesting that manufacturers of these qualifying biobased products provide information on the USDA Web site of qualifying biobased products about the intended uses of the product, information on whether or not the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether or not a qualifying biobased product overlaps with EPA-designated reprocessed latex paints and consolidated latex paints and which product should be afforded the preference in purchasing.
Note to paragraph (Biobased interior latex and waterborne alkyd paints and coatings products within this subcategory can compete with similar reprocessed latex paint and consolidated latex paint products with recycled content. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency designated reprocessed latex paints and consolidated latex paints containing recovered materials as items for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.12.
§ 3201.72 - Oven and grill cleaners.
(a) Definition. Liquid or gel cleaning agents used on high temperature cooking surfaces such as barbeques, smokers, grills, stoves, and ovens to soften and loosen charred food, grease, and residue.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 66 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 23, 2012, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased oven and grill cleaners. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased oven and grill cleaners.
§ 3201.73 - Slide way lubricants.
(a) Definition. Products used to provide lubrication and eliminate stick-slip and table chatter by reducing friction between mating surfaces, or slides, found in machine tools.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 74 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 23, 2012, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased slide way lubricants. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased slide way lubricants.
§ 3201.74 - Thermal shipping containers.
(a) Definitions. (1) Insulated containers designed for shipping temperature-sensitive materials.
(2) Thermal shipping containers for which Federal preferred procurement applies are:
(i) Durable thermal shipping container. These are thermal shipping containers that are designed to be reused over an extended period of time.
(ii) Non-durable thermal shipping containers. These are thermal shipping containers that are designed to be used once.
(b) Minimum biobased content. The minimum biobased content for all thermal shipping container products shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. The applicable minimum biobased contents for the Federal preferred procurement products are:
(1) Durable thermal shipping containers—21 percent.
(2) Non-durable thermal shipping containers—82 percent.
(c) Preference compliance date—(1) Durable thermal shipping containers. Determination of the preference compliance date for durable thermal shipping containers is deferred until USDA identifies two or more manufacturers of biobased durable thermal shipping containers. At that time, USDA will publish a document in the
(2) Non-durable thermal shipping containers. Determination of the preference compliance date for non-durable thermal shipping containers is deferred until USDA identifies two or more manufacturers of biobased non-durable thermal shipping containers. At that time, USDA will publish a document in the
§ 3201.75 - Air fresheners and deodorizers.
(a) Definition. Products used to alleviate the experience of unpleasant odors by chemical neutralization, absorption, anesthetization, or masking.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 97 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than April 4, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased air fresheners and deodorizers. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased air fresheners and deodorizers.
§ 3201.76 - Asphalt and tar removers.
(a) Definition. Cleaning agents designed to remove asphalt or tar from equipment, roads, or other surfaces.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 80 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than April 4, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased asphalt and tar removers. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased asphalt and tar removers.
§ 3201.77 - Asphalt restorers.
(a) Definition. Products designed to seal, protect, or restore poured asphalt and concrete surfaces.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 68 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than April 4, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased asphalt restorers. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased asphalt restorers.
§ 3201.78 - Blast media.
(a) Definition. Abrasive particles sprayed forcefully to clean, remove contaminants, or condition surfaces, often preceding coating.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 94 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than April 4, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased blast media. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased blast media.
(d) Determining overlap with an EPA-designated recovered content product. Qualifying products within this item may overlap with the EPA-designated recovered content product: Miscellaneous products—blasting grit. USDA is requesting that manufacturers of these qualifying biobased products provide information on the USDA Web site of qualifying biobased products about the intended uses of the product, information on whether or not the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether or not a qualifying biobased product overlaps with EPA-designated blasting grit products and which product should be afforded the preference in purchasing.
Note to paragraph (Biobased blast media within this designated product category can compete with similar blasting grit products with recycled content. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency designated blasting grit products containing recovered materials as products for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.17.
§ 3201.79 - Candles and wax melts.
(a) Definition. Products composed of a solid mass and either an embedded wick that is burned to provide light or aroma, or that are wickless and melt when heated to produce an aroma.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 88 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than April 4, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased candles and wax melts. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased candles and wax melts.
§ 3201.80 - Electronic components cleaners.
(a) Definition. Products that are designed to wash or remove dirt or extraneous matter from electronic parts, devices, circuits, or systems.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 91 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than April 4, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased electronic components cleaners. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased electronic components cleaners.
§ 3201.81 - Floor coverings (non-carpet).
(a) Definition. Products, other than carpet products, that are designed for use as the top layer on a floor. Examples are bamboo, hardwood, and cork tiles.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 91 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than April 4, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased floor coverings (non-carpet). By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased floor coverings (non-carpet).
(d) Determining overlap with an EPA-designated recovered content product. Qualifying products within this item may overlap with the EPA-designated recovered content product: Construction Products—floor tiles. USDA is requesting that manufacturers of these qualifying biobased products provide information on the USDA Web site of qualifying biobased products about the intended uses of the product, information on whether or not the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether or not a qualifying biobased product overlaps with EPA-designated floor tile products and which product should be afforded the preference in purchasing.
Note to paragraph (Biobased floor coverings within this designated product category can compete with similar floor tile products with recycled content. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency designated floor tile products containing recovered materials as products for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.17.
§ 3201.82 - Foot care products.
(a) Definition. Products formulated to be used in the soothing or cleaning of feet.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 83 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than April 4, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased foot care products. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased foot care products.
§ 3201.83 - Furniture cleaners and protectors.
(a) Definition. Products designed to clean and provide protection to the surfaces of household furniture other than the upholstery.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 71 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than April 4, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased furniture cleaners and protectors. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased furniture cleaners and protectors.
§ 3201.84 - Inks.
(a) Definitions. (1) Inks are liquid or powdered materials that are available in several colors and that are used to create the visual image on a substrate when writing, printing, and copying.
(2) Inks for which Federal preferred procurement applies are:
(i) Specialty inks. Inks used by printers to add extra characteristics to their prints for special effects or functions. Specialty inks include, but are not limited to: CD printing, erasable, FDA compliant, invisible, magnetic, scratch and sniff, thermochromic, and tree marking inks.
(ii) Inks (sheetfed—color). Pigmented inks (other than black inks) used on coated and uncoated paper, paperboard, some plastic, and foil to print in color on annual reports, brochures, labels, and similar materials.
(iii) Inks (sheetfed—black). Black inks used on coated and uncoated paper, paperboard, some plastic, and foil to print in black on annual reports, brochures, labels, and similar materials.
(iv) Inks (printer toner—<25 pages per minute (ppm)). Inks that are a powdered chemical, used in photocopying machines and laser printers, which is transferred onto paper to form the printed image. These inks are formulated to be used in printers with standard fusing mechanisms and print speeds of less than 25 ppm.
(v) Inks (printer toner—≥25 ppm). Inks that are a powdered chemical, used in photocopying machines and laser printers, which is transferred onto paper to form the printed image. These inks are formulated to be used in printers with advanced fusing mechanisms and print speeds of 25 ppm or greater.
(vi) Inks (news). Inks used primarily to print newspapers.
(b) Minimum biobased content. The minimum biobased content for all inks shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. The applicable minimum biobased contents for the Federal preferred procurement products are:
(1) Specialty inks—66 percent.
(2) Inks (sheetfed—color)—67 percent.
(3) Inks (sheetfed—black)—49 percent.
(4) Inks (printer toner—<25 ppm)—34 percent.
(5) Inks (printer toner—≥25 ppm)—20 percent.
(6) Inks (news)—32 percent.
(c) Preference compliance date. No later than April 4, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased inks. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased inks.
§ 3201.85 - Packing and insulating materials.
(a) Definition. Pre-formed and molded materials that are used to hold package contents in place during shipping or for insulating and sound proofing applications.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 74 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than April 4, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased packing and insulating materials. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased packing and insulating materials.
§ 3201.86 - Pneumatic equipment lubricants.
(a) Definition. Lubricants designed specifically for pneumatic equipment, including air compressors, vacuum pumps, in-line lubricators, rock drills, jackhammers, etc.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 67 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than April 4, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased pneumatic equipment lubricants. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased pneumatic equipment lubricants.
(d) Determining overlap with an EPA-designated recovered content product. Qualifying products within this item may overlap with the EPA-designated recovered content product: Vehicular Products—re-refined lubricating oils. USDA is requesting that manufacturers of these qualifying biobased products provide information on the USDA Web site of qualifying biobased products about the intended uses of the product, information on whether or not the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether or not a qualifying biobased product overlaps with EPA-designated re-refined lubricating oil products and which product should be afforded the preference in purchasing.
Note to paragraph (Biobased pneumatic equipment lubricants within this designated product category can compete with similar re-refined lubricating oil products with recycled content. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency designated re-refined lubricating oil products containing recovered materials as products for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.17.
§ 3201.87 - Wood and concrete stains.
(a) Definition. Products that are designed to be applied as a finish for concrete and wood surfaces and that contain dyes or pigments to change the color without concealing the grain pattern or surface texture.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 39 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than April 4, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased wood and concrete stains. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased wood and concrete stains.
§ 3201.88 - Agricultural spray adjuvants.
(a) Definition. Products mixed in the spray tank with the herbicide, pesticide, or fertilizer formulas that will improve the efficiency and the effectiveness of the chemicals, including sticking agents, wetting agents, etc.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 50 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than November 19, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased agricultural spray adjuvants. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased agricultural spray adjuvants.
§ 3201.89 - Animal cleaning products.
(a) Definition. Products designed to clean, condition, or remove substances from animal hair or other parts of an animal.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 57 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than November 19, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased animal cleaning products. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased animal cleaning products.
§ 3201.90 - Deodorants.
(a) Definition. Products that are designed for inhibiting or masking perspiration and other body odors and that are often combined with an antiperspirant.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 73 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than November 19, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased deodorants. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased deodorants.
§ 3201.91 - Dethatcher products.
(a) Definition. Products used to remove non-decomposed plant material accumulated in grassy areas.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 87 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than November 19, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased dethatchers. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased dethatchers.
§ 3201.92 - Fuel conditioners.
(a) Definition. Products formulated to improve the performance and efficiency of engines by providing benefits such as removing accumulated deposits, increasing lubricity, removing moisture, increasing the cetane number, and/or preventing microbial growths within the fuel system.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 64 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than November 19, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased fuel conditioners. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased fuel conditioners.
§ 3201.93 - Leather, vinyl, and rubber care products.
(a) Definition. Products that help clean, nourish, protect, and restore leather, vinyl, and rubber surfaces, including cleaners, conditioners, protectants, polishes, waxes, etc.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 55 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than November 19, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased leather, vinyl, and rubber care products. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased leather, vinyl, and rubber care products.
§ 3201.94 - Lotions and moisturizers.
(a) Definition. Creams and oils used to soften and treat damaged skin.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 59 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than November 19, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased lotions and moisturizers. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased lotions and moisturizers.
§ 3201.95 - Shaving products.
(a) Definition. Products designed for every step of the shaving process, including shaving creams, gels, soaps, lotions, and aftershave balms.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 92 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than November 19, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased shaving products. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased shaving products.
§ 3201.96 - Specialty precision cleaners and solvents.
(a) Definition. Cleaners and solvents used in specialty applications. These materials may be used in neat solution, diluted with water, or in hand wiping applications.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 56 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than November 19, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased specialty precision cleaners and solvents. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased specialty precision cleaners and solvents.
§ 3201.97 - Sun care products.
(a) Definition. Products including sunscreens, sun blocks, and suntan lotions that are topical products that absorb or reflect the sun's ultraviolet radiation to protect the skin.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 53 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than November 19, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased sun care products. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased sun care products.
§ 3201.98 - Wastewater systems coatings.
(a) Definition. Coatings that protect wastewater containment tanks, liners, roofing, flooring, joint caulking, manholes and related structures from corrosion. Protective coatings may cover the entire system or be used to fill cracks in systems.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 47 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than November 19, 2013, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased wastewater systems coatings. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased wastewater systems coatings.
§ 3201.99 - Water and wastewater treatment chemicals.
(a) Definition. Chemicals that are specifically formulated to purify raw water or to treat and purify wastewater from residential, commercial, industrial, and agricultural systems. Examples include coagulants, flocculants, neutralizing agents, activated carbon, or defoamers. This category excludes microbial cleaning products.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 87 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 6, 2020, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased water and wastewater treatment chemicals. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased water and wastewater treatment chemicals.
§ 3201.100 - Aircraft and boat cleaners.
(a) Definition. (1) Aircraft and boat cleaners are products designed to remove built-on grease, oil, dirt, pollution, insect reside, or impact soils on both interior and exterior of aircraft and/or boats.
(2) Aircraft and boat cleaners for which Federal preferred procurement applies are:
(i) Aircraft cleaners. Cleaning products designed to remove built-on grease, oil, dirt, pollution, insect reside, or impact soils on both interior and exterior of aircraft.
(ii) Boat cleaners. Cleaning products designed to remove built-on grease, oil, dirt, pollution, insect reside, or impact soils on both interior and exterior of boats.
(b) Minimum biobased content. The minimum biobased content for all aircraft and boat cleaners shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. The applicable minimum biobased contents for the Federal preferred procurement products are:
(1) Aircraft cleaners—48 percent.
(2) Boat cleaners—38 percent.
(c) Preference compliance date. No later than June 11, 2014, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased aircraft and boat cleaners. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased aircraft and boat cleaners.
§ 3201.101 - Automotive care products.
(a) Definition. Products such as waxes, buffing compounds, polishes, degreasers, soaps, wheel and tire cleaners, leather care products, interior cleaners, and fragrances that are formulated for cleaning and protecting automotive surfaces.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 75 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than June 11, 2014, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased automotive care products. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased automotive care products.
§ 3201.102 - Engine crankcase oils.
(a) Definition. Lubricating products formulated to provide lubrication and wear protection for four-cycle gasoline or diesel engines.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 25 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than June 11, 2014, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased engine crankcase oils. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased engine crankcase oils.
(d) Determining overlap with an EPA-designated recovered content product. Qualifying products within this item may overlap with the EPA-designated recovered content product: Re-refined lubricating oils. USDA is requesting that manufacturers of these qualifying biobased products provide information on the USDA Web site of qualifying biobased products about the intended uses of the product, information on whether or not the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether or not a qualifying biobased product overlaps with EPA-designated re-refined lubricating oil products and which product should be afforded the preference in purchasing.
Note to paragraph (Engine crankcase oils within this designated product category can compete with similar re-refined lubricating oil products with recycled content. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency designated re-refined lubricating oil products containing recovered materials as products for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.17.
§ 3201.103 - Gasoline fuel additives.
(a) Definition. Chemical agents added to gasoline to increase octane levels, improve lubricity, and provide engine cleaning properties to gasoline-fired engines.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 92 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than June 11, 2014, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased gasoline fuel additives. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased gasoline fuel additives.
§ 3201.104 - Metal cleaners and corrosion removers.
(a) Definition. (1) Products that are designed to clean and remove grease, oil, dirt, stains, soils, and rust from metal surfaces.
(2) Metal cleaners and corrosion removers for which Federal preferred procurement applies are:
(i) Corrosion removers. Products that are designed to remove rust from metal surfaces through chemical action.
(ii) Stainless steel cleaners. Products that are designed to clean and remove grease, oil, dirt, stains, and soils from stainless steel surfaces.
(iii) Other metal cleaners. Products that are designed to clean and remove grease, oil, dirt, stains, and soils from metal surfaces other than stainless steel.
(b) Minimum biobased content. The minimum biobased content for all metal cleaners and corrosion removers shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. The applicable minimum biobased contents for the Federal preferred procurement products are:
(1) Corrosion removers—71 percent.
(2) Stainless steel cleaners—75 percent.
(3) Other metal cleaners—56 percent.
(c) Preference compliance date. No later than June 11, 2014, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased metal cleaners and corrosion removers. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased metal cleaners and corrosion removers.
§ 3201.105 - Microbial cleaning products.
(a) Definition. (1) Cleaning agents that use microscopic organisms to treat or eliminate waste materials within drains, plumbing fixtures, sewage systems, wastewater treatment systems, or on a variety of other surfaces. These products typically include organisms that digest protein, starch, fat, and cellulose.
(2) Microbial cleaning products for which Federal preferred procurement applies are:
(i) Drain maintenance products. Products containing microbial agents that are intended for use in plumbing systems such as sinks, showers, and tubs.
(ii) Wastewater maintenance products. Products containing microbial agents that are intended for use in wastewater systems such as sewer lines and septic tanks.
(iii) General cleaners. Products containing microbial agents that are intended for multi-purpose cleaning in locations such as residential and commercial kitchens and bathrooms.
(b) Minimum biobased content. The minimum biobased content for all microbial cleaning products shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. The applicable minimum biobased contents for the Federal preferred procurement products are:
(1) Drain maintenance products—45 percent.
(2) Wastewater maintenance products—44 percent.
(3) General cleaners—50 percent.
(c) Preference compliance date. No later than June 11, 2014, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased microbial cleaning products. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased microbial cleaning products.
§ 3201.106 - Paint removers.
(a) Definition. Products formulated to loosen and remove paint from painted surfaces.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 41 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than June 11, 2014, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased paint removers. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased paint removers.
§ 3201.107 - Water turbine bearing oils.
(a) Definition. Lubricants that are specifically formulated for use in the bearings found in water turbines for electric power generation. Previously designated turbine drip oils are used to lubricate bearings of shaft driven water well turbine pumps.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 46 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than June 11, 2014, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased water turbine bearing oils. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased water turbine bearing oils.
§ 3201.108 - Intermediates—Plastic Resins.
(a) Definition. Intermediates—Plastic Resins are materials that are typically viscous liquids with the ability to harden permanently and may exist in liquid or solid (powder or pellets) states. Intermediates—Plastic Resins may be used in a variety of finished products neat, consisting of a single resin or polymer, or a homogeneous blend of two or more neat resins or polymers, or a composite, containing two or more distinct materials such as fiber-reinforced resins. Additionally, Intermediates—Plastic Resins may be used in finished products as additives such as plasticizers, pigments, thermal stability agents, or impact modifiers.
(b) Minimum biobased content. The Federal preferred procurement product must have a minimum biobased content of at least 22 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than July 10, 2019, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased Intermediates—Plastic Resins. By that date, Federal agencies responsible for drafting or reviewing specifications for products to be procured shall ensure that the relevant specifications require the use of biobased Intermediates—Plastic Resins.