Collapse to view only § 218.129 - Conditional exceptions based on compliance dates for Class II and III legacy freight train operations, certain other Class II and III freight railroad train operations, work train operations, helper service train operations, and lite locomotive train operations staffed with a one-person train crew.

§ 218.121 - Purpose and scope.

(a) The purpose of this subpart is to ensure that each train is adequately staffed and has appropriate safeguards in place for safe train operations under all operating conditions.

(b) This subpart prescribes minimum requirements for the size of different train crews depending on the type of operation and operating conditions. The minimum crew size requirements reflect the safety risks posed to railroad employees, the public, and the environment. This subpart also prescribes minimum requirements for the location of a second crewmember on a moving train and promotes safe and effective teamwork. Each railroad may prescribe additional or more stringent requirements in its operating rules, timetables, timetable special instructions, and other instructions.

(c) The requirements in this subpart are not applicable to a train operation controlled by a remote control operator as defined in § 229.5 of this chapter.

§ 218.123 - General train crew size safety requirements.

(a) General. Each railroad shall comply with the requirements of this subpart and may adopt its own rules or practices consistent with the requirements of this subpart. If any person, as defined in § 218.9 (including, but not limited to, each railroad, railroad officer, supervisor, and employee), violates any requirement of a railroad rule or practice implementing the requirements of this subpart, that person shall be considered to have violated the requirements of this subpart.

(b) Two-person train crew size safety requirement. Except as provided in this subpart, each train shall be assigned a minimum of two crewmembers.

(c) Hazardous materials. For the purposes of this paragraph (c), a tank car containing residue of a hazardous material as defined in § 171.8 of this title is not considered a loaded car. The exceptions in §§ 218.125 and 218.127 are not applicable, and the exceptions in § 218.129 apply as specified therein, when any train is:

(1) A high-hazard flammable train (HHFT) as defined in § 171.8 of this title;

(2) Transporting twenty (20) or more loaded tank cars or loaded intermodal portable tanks of any one or any combination of the hazardous materials identified in § 232.103(n)(6)(i)(B) of this chapter; or

(3) Transporting one or more car loads of rail-security sensitive materials (RSSM) as defined in § 1580.3 of this title.

(d) Location of crewmember(s) when the train is moving. A train crewmember that is not operating the train may be located anywhere outside of the operating cab of the controlling locomotive when the train is moving if:

(1) The train crewmember is on the train, except when the train crewmember cannot perform the duties assigned without temporarily disembarking from the train;

(2) The train crewmember and a locomotive engineer in the cab of the controlling locomotive can directly communicate with each other;

(3) The train crewmember can continue to perform the duties assigned; and

(4) The location does not violate any Federal railroad safety law, regulation, or order.

§ 218.125 - Specific passenger and tourist train operation exceptions to crew size safety requirements.

The requirements in this subpart are not applicable to the following passenger and tourist train operations that are operated with a one-person train crew:

(a) The train is a tourist train operation that is not part of the general railroad system of transportation;

(b) A tourist train operation that is part of the general system of transportation or a passenger operation in which:

(1) The locomotive engineer is moving cars empty of passengers; and

(2) Passengers will not board the train's cars until the crew conducts a safety briefing on the safe operation and use of the train's exterior side doors, in accordance with § 238.135 of this chapter;

(c) A tourist train operation that is part of the general system of transportation or a passenger operation involving a single self-propelled car or married-pair unit, e.g., an MU locomotive operation, where the locomotive engineer has direct access to the passenger seating compartment and (for passenger railroads subject to part 239 of this chapter) the passenger railroad's emergency preparedness plan for this operation is approved under § 239.201 of this chapter;

(d) A rapid transit operation in an urban area, i.e., an urban rapid transit system that is connected with the general railroad system of transportation under the following conditions:

(1) The operation is temporally separated from any conventional railroad operations;

(2) There is an FTA-approved and designated State Safety Oversight (SSO) Agency that is qualified to provide safety oversight; and

(3) The operator has an FTA/SSO-approved Public Transportation Agency Safety Plan in accordance with parts 673 and 674 of this title; or

(e) Each passenger train operation with a one-person train crew established before June 10, 2024 with an approved passenger train emergency preparedness plan under part 239 of this chapter for the operation.

§ 218.127 - Specific freight train exceptions to crew size safety requirements.

The requirements in this subpart are not applicable to the following freight train operations that are operated with a one-person train crew:

(a) Mine load out, plant dumping, or similar operation exception. A unit freight train:

(1) Being loaded or unloaded in an assembly line manner;

(2) Located on a track that is temporarily made inaccessible from the general railroad system of transportation;

(3) Moving at a maximum authorized speed of 10 miles per hour or less;

(4) Not requiring the one-person train crewmember to operate a hand-operated switch, fill out paperwork, or call signal indications during the loading or unloading process; and

(5) If the operation is overseen by another person, typically in a tower or on the ground, requiring that person to have the capability of communicating with the one-person train crewmember operating the train.

(b) [Reserved]

§ 218.129 - Conditional exceptions based on compliance dates for Class II and III legacy freight train operations, certain other Class II and III freight railroad train operations, work train operations, helper service train operations, and lite locomotive train operations staffed with a one-person train crew.

(a) Application of this section. A railroad is not required to comply with the requirements in this section for each one-person train crew operation subject to an exception covered by § 218.125 or § 218.127. The following train operations may be operated with a one-person train crew subject to the requirements in this subpart:

(1) Each Class II or III railroad's legacy one-person train crew freight operation that has been established for at least two years before June 10, 2024, may continue to operate with a one-person train crew, including continuing to transport hazardous materials of the types or quantities specified in § 218.123(c), if:

(i) No later than September 6, 2024, the railroad:

(A) Provides FRA with written notice, as specified by the requirements in paragraph (b) of this section; and

(B) Complies with the additional requirements in paragraphs (c)(1) and (2) of this section; and

(ii) No later than June 9, 2026, the railroad complies with the additional requirements in paragraph (c)(3) of this section.

(2) Each Class II or III freight railroad seeking to initiate a train operation staffed with a one-person train crew not transporting hazardous materials of the types or quantities specified in § 218.123(c) shall:

(i) Provide FRA with written notice, as specified by the requirements in paragraph (b) of this section before commencing the operation; and

(ii) Comply with the additional requirements in paragraph (c) of this section.

(3) Each railroad seeking to continue or initiate work train operations with a one-person train crew, including operations involving a work train traveling to or from a work site, shall:

(i) Limit this type of non-revenue service train that is used for the administration and upkeep service of the railroad so that it does not exceed 4,000 trailing tons;

(ii) No later than September 6, 2024, comply with the additional requirements in paragraphs (c)(1) and (2) of this section; and

(iii) No later than June 9, 2026, comply with the additional requirements in paragraph (c)(3) of this section.

(4) Each railroad seeking to continue or initiate helper service train operations with a one-person train crew, including operations involving a helper service train traveling to or from a work site, shall:

(i) No later than September 6, 2024, comply with the additional requirements in paragraphs (c)(1) and (2) of this section; and

(ii) No later than June 9, 2026, comply with the additional requirements in paragraph (c)(3) of this section.

(5) Each railroad seeking to continue or initiate a lite locomotive train operation staffed with a one-person train crew, excluding an MU locomotive operation, shall:

(i) No later than September 6, 2024, comply with the additional requirements in paragraphs (c)(1) and (2) of this section; and

(ii) No later than June 9, 2026, comply with the additional requirements in paragraph (c)(3) of this section.

(b) Written notice requirements. The written notice shall be submitted by email to [email protected] and, at a minimum, include the following:

(1) The name, title, address, telephone number, and email address of the primary person(s) to be contacted regarding the written notice and the operation;

(2) The location of the operation, with as much specificity as can be provided, as to the characteristics of the geographic area through which the trains will operate (e.g., population density and proximity to environmentally sensitive areas), the terrain over which the trains will be operated, industries or communities served, and track segments, territories, divisions, or subdivisions operated over. For each legacy one-person train crew freight operation under paragraph (a)(1) of this section, the written notice must include business records or other written documents supporting that the legacy operation was established for at least two years before June 10, 2024. To establish a legacy one-person train crew freight operation, the railroad must provide evidence that the operation occurred at regular intervals under a set of defined procedures or conditions;

(3) The class(es) of track operated over, the method of operation, a list of the signal and train control systems, devices, and appliances installed and in operation, and a list of all active and passive highway-rail grade crossings, including crossing numbers;

(4) The locations of any track where the average grade of any segment of the track operated over is 1 percent or more over 3 continuous miles or 2 percent or more over 2 continuous miles;

(5) The maximum authorized speed of the operation;

(6) The approximate average number of miles and hours a one-person train crew will operate in a single tour of duty;

(7) The number and frequency of the trains involved, and the maximum number of cars and tonnage set for the operation, if any;

(8) Whether the one-person train crew operation is permitted to haul hazardous materials of any quantity and type, and the approximate percentage of carload traffic in the one-person train crew operation that is hazardous materials;

(9) Whether any limitations are placed on a person operating as a one-person train crew. Such limitations may include, but are not limited to, a maximum number of miles or hours during a single tour of duty, or limitations placed on a person in coordination with a fatigue mitigation plan;

(10) Information regarding other operations traveling on the same track as the one-person train operation or that travel on an adjacent track. Such information shall include, but is not limited to, the volume of traffic and the types of opposing moves (e.g., passenger trains or freight trains hauling hazardous materials);

(11) A detailed description of any technology that is used to perform tasks typically performed by a second crewmember, or that prevents or mitigates the consequences of accidents or incidents;

(12) A copy of any railroad rule or practice that applies to the one-person train crew operation, but does not apply to train crew operations with two or more crewmembers;

(13) For each railroad seeking to continue a legacy freight train operation staffed with a one-person train crew as permitted by paragraph (a)(1) of this section, five (5) years of accident and incident data, as required by part 225 of this chapter, for the operation identified or, for operations established less than five (5) years before June 10, 2024, accident and incident data for the operation from the date the operation was established; and

(14) Any other information describing protections provided in lieu of a second train crewmember, or relevant data or analysis, or both, that the railroad can provide about its one-person train crew operation and how that operation is as safe or safer than a two-person minimum train crew operation.

(c) Additional requirements. Each railroad with an applicable one-person train crew operation shall:

(1) Adopt and comply with an operating rule that satisfies the requirements of this paragraph to ensure rail employees can take mitigation measures that provide a level of safety that is as safe or safer than a two-person train crew operation to address certain situations with the one-person train crew operation.

(i) At a minimum, the operating rule shall address the following types of situations:

(A) An accidental or non-accidental release of any hazardous material;

(B) An accident/incident regardless of whether it is required to be reported to FRA under part 225 of this chapter;

(C) A request from an emergency responder to unblock a highway-rail grade crossing in response to a potentially life-threatening situation;

(D) A train or on-track equipment derailment;

(E) A disabled train; and

(F) An illness, injury, or other incapacitation of the one-person train crewmember.

(ii) At a minimum, the operating rule shall:

(A) Describe the role and responsibilities of the one-person train crewmember and any other railroad employees, including supervisors, with responsibility to address a situation described in paragraph (c)(1)(i) of this section; and

(B) Describe any logistics and the railroad's expected response time(s).

(2) Adopt and comply with an operating rule that satisfies the requirements of this paragraph to ensure radio or wireless communications with a one-person train crew is as safe or safer than a two-person train crew for train operations and crewmember safety. At a minimum, the operating rule shall require that:

(i) The one-person train crew have a working radio or working wireless communications on the controlling locomotive appropriate for railroad communications as defined in § 220.5 of this chapter, even if not otherwise required in § 220.9 of this chapter;

(ii) The train dispatcher or operator must confirm with a one-person train crewmember that the train is stopped before conveying a mandatory directive by radio transmission as required in § 220.61 of this chapter;

(iii) A one-person train crewmember must contact a railroad employee, typically a dispatcher, a supervisor or manager, or an intermittently assisting crewmember, whenever it can be anticipated that radio or wireless communication could be lost, e.g., before the train enters a tunnel, unless technology or a different protocol is established to monitor the train's real-time progress; and

(iv) Procedures that establish when search-and-rescue operations shall be initiated if all radio or wireless communication is lost with a one-person train crewmember.

(3) Adopt and comply with an operating rule that satisfies the requirements of this paragraph to ensure:

(i) A one-person train crew's controlling locomotive is equipped with a functioning alerter that is operating as intended as defined in § 229.5 of this chapter. For each railroad that limits the one-person train crew's operation to a maximum authorized speed of 25 miles per hour and is not required to have an alerter on the locomotive that is equipped per the requirements in § 229.140 of this chapter, any functioning alerter that is operating as intended will be acceptable if it has a manual reset and will result in a penalty brake application that brings the locomotive or train to a stop if not properly acknowledged; and

(ii) That a one-person train crewmember must test that alerter to confirm it is functioning before departure from each initial terminal, or prior to being coupled as the lead locomotive in a locomotive consist.

§ 218.131 - Special approval petition requirements for train operations staffed with a one-person train crew.

(a) General. With the exception of operations permitted under §§ 218.125 through 218.129, and as provided in paragraph (a)(2) of this section:

(1) No railroad may operate a train with a one-person train crew unless it receives special approval for the operation under this subpart.

(2) For a railroad that has established a one-person train crew operation before June 10, 2024, the railroad may continue the operation in accordance with this section pending FRA's decision on the railroad's special approval petition if:

(i) The railroad submits a written notice by email to [email protected] no later than June 24, 2024 that, at a minimum, provides a summary of the operation and the name, title, address, telephone number, and email address of the primary person(s) to be contacted regarding the written notice and the operation;

(ii) The railroad, in coordination with FRA, eliminates, mitigates, or otherwise addresses any safety hazards related to the one-person train crew operation FRA finds in reviewing the railroad's special approval petition; and

(iii) The railroad submits its special approval petition, as specified by the requirements in paragraph (b) of this section, no later than August 7, 2024.

(3) Each freight railroad seeking to either initiate or continue a train operation with a one-person train crew must receive FRA's special approval for the operation under this subpart and shall comply with the requirements in § 218.129(c).

(4) Each passenger railroad seeking to initiate a train operation with a one-person train crew must receive FRA's special approval for the operation under this subpart and have either:

(i) An approved passenger train emergency preparedness plan under part 239 of this chapter for the operation; or

(ii) An approved waiver from the passenger train emergency preparedness plan requirements as permitted under part 211 of this chapter. A passenger railroad may petition FRA for both a waiver under part 211 and special approval for a train operation staffed with a one-person train crew in the same filing.

(b) Petition for a train operation staffed with a one-person train crew. Each petition for a train operation with a one-person train crew that is not permitted under §§ 218.125 through 218.129 must contain sufficient information for FRA to determine whether approving the operation described in the petition is as safe or safer than a two-person minimum train crew operation. At a minimum, a petition must include:

(1) The name, title, address, telephone number, and email address of the primary person to be contacted regarding review of the special approval petition;

(2) The location of the operation, with as much specificity as can be provided, as to the characteristics of the geographic area through which the trains will operate (e.g. population density and proximity to environmentally sensitive areas), the terrain over which the trains will be operated, industries or communities served, and track segments, territories, divisions, or subdivisions operated over;

(3) The class(es) of track to be operated over, the method of operation, a list of the signal and train control systems, devices, and appliances installed and in operation, and a list of all active and passive highway-rail grade crossings, including crossing numbers;

(4) The locations of any track where the average grade of any segment of the track operated over is 1 percent or more over 3 continuous miles or 2 percent or more over 2 continuous miles;

(5) The maximum authorized speed of the operation;

(6) The approximate average number of miles and hours a person is projected to operate as a train crewmember in a one-person train crew operation;

(7) The maximum number of cars and tonnage proposed for the operation, if any;

(8) Whether the railroad is seeking approval to transport hazardous materials of the types or quantities specified in § 218.123(c) or whether the railroad is seeking approval to transport other hazardous materials (as defined by § 171.8 of this title) of any quantity and type;

(9) Whether any limitations will be placed on a person operating as a one-person train crew. Such limitations may include, but are not limited to, a maximum number of miles or hours during a single tour of duty, or limitations placed on a person in coordination with a fatigue mitigation plan;

(10) Information regarding other operations that may travel on the same track as, or an adjacent track to, the train operation staffed with a one-person train crew. Such information shall include, but is not limited to, the volume of traffic and the types of opposing moves (e.g., passenger or freight trains hauling hazardous materials);

(11) A detailed description of any technology that will be used to perform or support tasks typically performed by a second crewmember, or that will prevent or significantly mitigate the consequences of accidents or incidents;

(12) A copy of any railroad rule or practice that will apply to the proposed train operation(s) with a one-person train crew, but does not apply to train crew operations with two or more crewmembers;

(13) A copy of a railroad operating rule that will apply to the proposed train operation(s) with a one-person train crew, and which complies with the requirements of § 218.129(c)(1), to ensure rail employees can take mitigation measures that provide a level of safety that is as safe or safer than a two-person train crew operation to address certain situations with the one-person train crew operation. A passenger train operation with an approved emergency preparedness plan under part 239 of this chapter satisfies the requirement in this paragraph (b)(13);

(14) Five (5) years of accident and incident data, as required by part 225 of this chapter, for the operation identified in paragraph (b)(2) of this section, when operating with two or more crewmembers, or, for operations established less than five (5) years before June 10, 2024, accident and incident data for the operation from the date the operation was established;

(15) A risk assessment of the proposed operation that meets the requirements of § 218.133;

(16) Any other information describing protections provided in lieu of a second train crewmember, or other relevant data or analysis.

(c) Additional information. FRA may request any additional information, beyond what is provided in the petition, that it deems necessary.

§ 218.133 - Risk assessment content and procedures.

(a) General. A risk assessment submitted under this subpart must meet the following requirements:

(1) Contain a list and descriptions of all functions, duties, and tasks associated with the proposed operation to be performed by the one-person train crewmember, other railroad employee(s), or equipment, including, at a minimum, any function performed:

(i) To prepare a train for operation (including, but not limited to, pre-departure inspections, obtaining track bulletins, orders, or manifests, managing the train consist, including train makeup, obtaining and ensuring the accuracy of the train consist, arming and testing the end-of-train device, and performing brake tests);

(ii) To operate a train (including, but not limited to, operating and controlling the train, interacting with non-crewmembers such as the dispatcher or roadway workers, and responding to emergencies or unexpected events); and

(iii) To ensure safety once a train has stopped moving (e.g., including, but not limited to, securing the train).

(2) Describe the allocation of all functions, duties, and tasks to the one-person train crewmember, other railroad employee(s), or equipment.

(3) Contain a risk-based hazard analysis for the proposed train operation's functions, duties, and tasks, that shall:

(i) Identify any new hazards, changes to existing hazards and/or changes to the risk of an existing hazard associated with the proposed train operation, as compared to a two-person minimum train crew operation, taking account of all aspects of the railroad's system, including, at a minimum, infrastructure, equipment, technology, work schedules, mode of operation, operating rules and practices, training and other areas impacting railroad safety;

(ii) Calculate and/or update each risk, quantitatively or qualitatively, or both, by assessing each new hazard, change to an existing hazard and/or change to the risk of a hazard, in terms of the severity and likelihood of a mishap;

(iii) Recalculate each risk mitigated in accordance with § 218.131(b)(15), quantitatively or qualitatively, or both, by assessing each new hazard, change to an existing hazard and/or change to the risk of a hazard and the level of mitigation (elimination or reduction), in terms of the severity and likelihood of a mishap; and

(iv) Provide a statement with supporting evidence that the one-person train crew operation with a fully implemented mitigation plan is as safe or safer than a two-person minimum train crew operation.

(4) Contain a mitigation plan that documents the design and implementation timeline of the sustained mitigation strategies to eliminate or reduce the overall risk to a level such that the one-person train crew operation is as safe or safer than a two-person minimum train crew operation, considering, at a minimum, the following:

(i) The design of the system, equipment, and components, including equipment reliability and the necessary functions to be performed, in both a normal operation and in a degraded or failed state; and

(ii) The human factors associated with the processes and tasks to be performed, including the required skills and capabilities, the operating environment, and existing or potential impairments.

(b) Alternative standard. A railroad may petition the Associate Administrator for Safety for approval to use alternative methodologies or procedures, or both, other than those required by paragraph (a) of this section to assess the risk associated with an operation proposed under this section. If, after providing public notice of the request for approval and an opportunity for public comment on the request, the Associate Administrator for Safety finds that any such petition demonstrates that the alternative proposed methodology or procedures, or both, will provide an accurate assessment of the risk associated with the operation, the Associate Administrator for Safety may approve the use of the proposed alternative(s).

§ 218.135 - Special approval procedure.

(a) Petition. Each railroad submitting a petition under § 218.131 shall send the petition by email to [email protected]. FRA will make the petition publicly available at https://www.regulations.gov.

(b) Federal Register notice. FRA will publish a notice in the Federal Register concerning each petition under § 218.131.

(c) Comment. Not later than 60 days from the date of publication of the notice in the Federal Register under paragraph (b) of this section, any person may comment on the petition.

(1) Each comment shall provide all relevant information and data in support of the commenter's position.

(2) Each comment shall be submitted to FRA through https://www.regulations.gov to the docket identified in the Federal Register notice.

(d) Disposition of petitions. (1) If the Administrator finds it necessary or desirable, FRA will conduct a hearing on a petition in accordance with its rules of practice in part 211 of this chapter.

(2) A petition must not be implemented until approved. If FRA finds that the petition complies with the requirements of § 218.131 and that approving the petition is as safe or safer than a two-person minimum train crew operation, FRA will grant the petition, normally within 120 days of its receipt. If the petition is neither granted nor denied within 120 days, the petition remains pending for decision. FRA may attach special conditions to the approval of the petition. Following the approval of a petition, FRA may reopen consideration of the petition for cause stated.

(3) If FRA finds that a petition does not comply with the requirements of this subpart or that approving the petition would not be as safe or safer than a two-person minimum train crew operation, FRA will deny the petition, normally within 120 days of its receipt.

(4) When FRA decides a petition, reopens consideration of a petition, or closes a reopened petition, FRA will send written notice of the decision to the petitioner and publish that decision in the docket.

(e) Modifications. (1) A railroad that intends to materially modify an operation subject to an FRA approval under this section shall submit a description of how it intends to modify the operation, along with either a new or an updated risk assessment accounting for the identified proposed modifications. The new or updated risk assessment must meet the requirements of § 218.133 and be submitted by email to [email protected] at least 60 days before the date proposed to implement any such modification. For the purposes of this paragraph (e), a material modification is a change:

(i) To a railroad's operations, infrastructure, locomotive control technology, or risk mitigation technology, that may affect the safety of the operation;

(ii) That would affect the assumptions underlying the risk assessment on which an FRA approval under this section is based; or

(iii) That would affect the assumptions underlying the risk assessment's risk calculations or mitigations on which an FRA approval under this section is based.

(2) When FRA decides on a material modification to a petition, FRA will send written notice of the decision to the petitioner and publish that decision in the same docket created for the petition in paragraph (a) of this section. FRA may reopen consideration of a petition based on a material modification, deny the material modification, or grant the material modification with or without special conditions to the approval. A material modification must not be implemented until approved. If the material modification submission is neither granted nor denied within 60 days, the petition remains pending for decision.

§ 218.137 - Annual railroad responsibilities after receipt of special approval.

(a) Each railroad that receives special approval to use an operation with a one-person train crew under this subpart shall prepare an annual report, which will be a formal review and analysis each calendar year, of the one-person train crew operation. The annual report, which will include a railroad's findings and conclusions from its review, shall be submitted no later than March 31 of the following year to [email protected]. The requirements in paragraphs (b) and (c) of this section describe the components of a railroad's annual report.

(b) A railroad's annual report must include the safety data and information listed in paragraphs (b)(1) and (2) of this section for any one-person train crew operation that receives special approval under this subpart.

(1) The total number of:

(i) FRA-reportable accidents/incidents under part 225 of this chapter, including subtotals for accidents/incidents that occurred at a highway-rail grade crossing and those that did not occur at a highway-rail grade crossing, and subtotals by State and cause. If an accident/incident was FRA-reportable for more than one reason (e.g., the accident/incident occurred at a highway-rail grade crossing and resulted in rail equipment damages higher than the current reporting threshold), the accident/incident shall only be listed once in the total calculation;

(ii) FRA-reportable employee fatalities;

(iii) FRA-reportable employee injuries;

(iv) Trespasser fatalities at a highway-rail grade crossing;

(v) Trespasser injuries at a highway-rail grade crossing;

(vi) Passenger fatalities at a highway-rail grade crossing;

(vii) Passenger injuries at a highway-rail grade crossing;

(viii) Instances where a railroad employee did not comply with a railroad rule or practice applicable to the one-person train crew operation receiving special approval under this subpart but not applicable to train crew operations with two or more crewmembers that travel on the train;

(ix) Instances where a one-person train crewmember had a locomotive engineer or conductor certification revoked for violation of an operating rule or practice that occurred when the person was operating a one-person train crew operation receiving special approval under this subpart. In addition to the total number of these instances, the railroad must report the subtotals for each type of certification revoked;

(x) Accountable rail equipment accidents/incidents under part 225 of this chapter;

(xi) Instances when the railroad was required to comply with an operating rule to ensure rail employees can take mitigation measures that provide a level of safety that is as safe or safer than a two-person train crew operation to address certain situations with the one-person train crew operation under § 218.131(b)(13);

(xii) Instances when a dispatcher, operator, or other required employee unexpectedly lost communication with the one-person train crew operation receiving special approval under this subpart;

(xiii) Employee hours worked; and

(xiv) Train miles.

(2) For each instance counted in the totals reported in paragraphs (b)(1)(i) through (xii) of this section, a railroad's annual report must clearly identify each instance by date and location and provide a complete factual description of the event.

(c) The annual report must also include written confirmation that the risk assessment for operations receiving special approval under this subpart, including all calculations and assumptions, remains unchanged and that no technology changes have been implemented or new or additional hazards identified.

(1) If any risk assessment calculation or assumption changes for an operation receiving special approval under this subpart, a new or updated risk assessment meeting the requirements of § 218.133 must be prepared and submitted with the railroad's annual report. This annual reporting requirement does not negate the requirement to submit a new or updated risk assessment when making a material modification to an operation as required in § 218.135.

(2) Any new or updated risk assessment submitted in accordance with paragraph (c) of this section must include a written plan and schedule for implementing any mitigations required to address any newly identified hazards.

(d) FRA will review and respond to a railroad's annual report submission in accordance with paragraph (a) of this section by September 30 of the year it is submitted.

(1) FRA's response may include advice or recommendations; and

(2) For a one-person train crew operation receiving special approval under this subpart, FRA may reopen consideration of a petition under § 218.135 based on a finding that a railroad's annual report submission suggests that the petition does not comply with the requirements of this subpart or that the operation is no longer as safe or safer than a two-person train crew operation.