Collapse to view only § 53.10-15 - Manufacturer's data report forms.
- § 53.10-1 - General.
- § 53.10-3 -
- § 53.10-10 - Certification by stamping.
- § 53.10-15 - Manufacturer's data report forms.
§ 53.10-1 - General.
The tests, inspection, stamping, and reporting of heating boilers must be as indicated in article 5, part HG of Section IV of the ASME BPVC (incorporated by reference; see § 53.01-1) except as noted otherwise in this subpart.
§ 53.10-3 -
(a) The inspections required by HG-500 through HG-540 must be performed by the “Authorized Inspector” as defined in HG-515 of Section IV of the ASME BPVC (incorporated by reference; see § 53.01-1). The Authorized Inspector must hold a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors. After installation, heating boilers must be inspected for compliance with this part by a marine inspector.
(b) Automatically controlled boilers must be subjected to the operating tests prescribed in part 63 of this subchapter.
(c) All heating boilers must have the operation of their pressure relieving devices checked after the final installation.
§ 53.10-10 - Certification by stamping.
Stamping of heating boilers must be as indicated in HG-530 of Section IV of the ASME BPVC (incorporated by reference; see § 53.01-1).
§ 53.10-15 - Manufacturer's data report forms.
The manufacturer's data report forms required by HG-520 of Section IV of the ASME BPVC (incorporated by reference; see § 53.01-1) must be made available to the marine inspector for review. The Authorized Inspector's National Board commission number must be included on the manufacturer's data report forms.