Collapse to view only § 50.05-1 - General.
- § 50.05-1 - General.
- § 50.05-5 - Existing boilers, pressure vessels or piping systems.
- § 50.05-10 - Alterations or repairs.
- § 50.05-15 - Vessels subject to regulations in this subchapter.
- § 50.05-20 - Steam-propelled vessels.
§ 50.05-1 - General.
(a) The regulations in this subchapter apply to the marine engineering details of installations on vessels required to be inspected and certificated under other subchapters in this chapter as described in § 50.01-10.
(b) The regulations in this subchapter are not retroactive in effect, except as provided in § 50.05-5 or § 50.05-10, or if specifically so provided for at the time specific regulations are amended or added.
(c) The requirements in this subchapter revised or added subsequent to July 1, 1969, are applicable to the installations contracted for after the effective dates of such requirements. Normally, materials, items of equipment, or installations in vessels which have been accepted and passed as satisfactory and meeting the applicable requirements in this subchapter then in effect and which are maintained in good and serviceable condition to the satisfaction of the Officer in Charge, Marine Inspection, may be continued in use until replacement is deemed necessary by such officer or as specified in the regulations.
(d) Items of equipment, which are in use on vessels, previously approved by the Commandant but not complying with the latest specification requirements may be continued in use so long as they are maintained in good and serviceable condition to the satisfaction of the Officer in Charge, Marine Inspection, until replacement is deemed necessary by such officer or as specified in the regulations.
(e) Industrial systems and components on mobile offshore drilling units must meet subpart 58.60 of this subchapter.
§ 50.05-5 - Existing boilers, pressure vessels or piping systems.
(a) Whenever doubt exists as to the safety of an existing boiler, pressure vessel, or piping system, the marine inspector may require that it be gaged or checked to determine the extent of deterioration, and if necessary for safety may require the recalculation and reduction of the maximum allowable working pressure.
(b) For the purpose of recalculating the maximum allowable working pressure of boilers, pressure vessels, or piping which have deteriorated in service, the applicable design formulas in effect at the time it was contracted for or built must be used.
(c) When existing vessels are reboilered, the mountings and attachments must be renewed in accordance with the regulations in this subchapter in effect at the time such reboilering work is contracted for. The existing steam piping must be examined. Those portions which are in good condition and comply with minimum thickness requirements in effect at the time such reboilering work is contracted for may be continued in service. The steam piping replaced must be in accordance with the regulations in this subchapter in effect for new construction.
(d) For the purpose of this section, existing equipment includes only items which have previously met all Coast Guard requirements for installation aboard a vessel certificated by the Coast Guard, including requirements for design, fabrication, testing, and inspection at the time the equipment was new.
§ 50.05-10 - Alterations or repairs.
(a) When alteration or repair of boilers, pressure vessels, machinery, safety valves or piping systems becomes necessary, the work must be done under the cognizance of the Officer in Charge Marine Inspection. It must be done in accordance with the regulations in effect at the time such vessel or installation was contracted for or built (whichever is latest), or in accordance with the regulations in effect for new construction.
(b) When alterations or repairs are made to a U.S. flag vessel in a port or place not in the United States, a notice containing details of the proposed alterations or repairs must be submitted to the appropriate Officer in Charge, Marine Inspection.
§ 50.05-15 - Vessels subject to regulations in this subchapter.
(a) Passenger vessels, tank vessels, cargo and miscellaneous vessels, nautical schoolships, mobile offshore drilling units, and oceanographic vessels are subject to the regulations in this subchapter to the extent prescribed by various laws and regulations as described in § 50.01-1. The applicable provisions in this subchapter apply to all such U.S. flag vessels, and to all such foreign vessels which carry passengers from any port in the United States except as follows:
(1) Any vessel of a foreign nation signatory to the International Convention for Safety of Life at Sea, 1974, and which has on board a current, valid Convention certificate attesting to the sufficiency of the marine engineering details as prescribed by applicable regulations in this chapter.
(2) Any vessel of a foreign nation having inspection laws approximating those of the United States together with reciprocal inspection arrangements with the United States, and which has on board a current, valid certificate of inspection issued by its government under such arrangements.
(3) Any vessel operating exclusively on inland waters which are not navigable waters of the United States.
(4) Any vessel laid up and dismantled and out of commission.
(5) With the exception of vessels of the U.S. Maritime Administration, any vessel with the title vested in the United States and which is used for public purposes.
(b) Notwithstanding the exceptions previously noted in paragraphs (a)(1) and (2) of this section, foreign vessels of novel design or construction or whose operation involves potential unusual risks are subject to inspection to the extent necessary to safeguard life and property in U.S. ports, as further provided by § 2.01-13 in subchapter A of this chapter.
§ 50.05-20 - Steam-propelled vessels.
(a) The requirements covering design of the propelling engine, boiler, and the auxiliary machinery, and the inspection thereof on all vessels which are more than 40 feet in length, and which are propelled by machinery driven by steam must be in accordance with the applicable provisions of this subchapter.
(b) If the engines, boilers, and auxiliary machinery are found to be in safe operating condition at the initial or subsequent periodical inspection, the Officer in Charge, Marine Inspection, must issue a letter to that effect. Such letter must be posted on the vessel under glass. The letter will be valid for a specified period of time, as determined by the Officer in Charge, Marine Inspection. The owner, within 30 days prior to its expiration, must make application to the nearest Officer in Charge, Marine Inspection for a renewal thereof.