1. Regulations
  2. title 40
  3. chapter I-i31
  4. part 466
  5. subpart A
  6. § 466.12

Collapse to view only § 466.12 - Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.

§ 466.10 - Applicability; description of the steel basis material.

This subpart applies to discharges to waters of the United States, and introduction of pollutants into publicly owned treatment works from porcelain enameling on steel basis materials.

AUTHORITY: Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the “Act”); 33 U.S.C. 1311, 1314 (b), (c), (e) and (g), 1316 (b) and (c), 1317 (b) and (c), and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217.

SOURCE: 47 FR 53184, Nov. 24, 1982, unless otherwise noted.

CITE AS: 40 CFR 466.10

§ 466.11 - Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.

Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations for metal preparation operations and for coating operations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):

Subpart A—BPT Effluent Limitations

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average Metal preparation Coating operation Metal preparation Coating operation Metric units—mg/m 2 of area processed or coated Chromium16.823.416.811.38 Lead6.011.215.211.06 Nickel56.4611.4340.058.11 Zinc53.2610.7822.434.54 Aluminum182.2036.8774.4715.07 Iron112.1222.6956.0611.34 Oil and grease800.84162.10480.5197.23 TSS1642.00332.20800.90162.00 pH( 1)( 1)( 1)( 1) English Units—pounds per 1 million ft 2 of area processed or coated Chromium3.450.071.400.29 Lead1.230.251.070.22 Nickel11.572.348.201.66 Zinc10.912.214.600.93 Aluminum37.327.5515.263.09 Iron22.964.6511.482.32 Oil and grease164.0333.1998.4219.92 TSS337.0068.10164.0033.20 pH( 1)( 1)( 1)( 1)

1 Within the range 7.5 to 10.0 at all times.

[47 FR 53184, Nov. 24, 1982, as amended at 50 FR 36543, Sept. 6, 1985]

AUTHORITY: Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the “Act”); 33 U.S.C. 1311, 1314 (b), (c), (e) and (g), 1316 (b) and (c), 1317 (b) and (c), and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217.

SOURCE: 47 FR 53184, Nov. 24, 1982, unless otherwise noted.

CITE AS: 40 CFR 466.11

§ 466.12 - Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.

Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable:

Subpart A—BAT Effluent Limitations

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average Metal preparation Coating operation Metal preparation Coating operation Metric units—mg/m 2 of area processed or coated Chromium16.820.536.810.22 Lead6.010.195.210.16 Nickel56.501.7840.051.26 Zinc53.301.6822.430.71 Aluminum182.005.7474.482.35 Iron112.123.5356.061.77 English Units—pounds per 1 million ft 2 of area processed or coated Chromium3.450.111.40.05 Lead1.230.041.070.03 Nickel11.570.378.200.26 Zinc10.910.354.600.15 Aluminum37.321.1815.260.48 Iron22.960.7211.480.36
[47 FR 53184, Nov. 24, 1982, as amended at 50 FR 36543, Sept. 6, 1985]

AUTHORITY: Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the “Act”); 33 U.S.C. 1311, 1314 (b), (c), (e) and (g), 1316 (b) and (c), 1317 (b) and (c), and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217.

SOURCE: 47 FR 53184, Nov. 24, 1982, unless otherwise noted.

CITE AS: 40 CFR 466.12

§ 466.13 - New source performance standards.

Any new source subject to this subpart must achieve the following new source performance standards:

Subpart A—NSPS

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average Metal preparation Coating operation Metal preparation Coating operation Metric units—mg/m 2 of area processed or coated Chromium3.370.471.50.19 Lead1.00.130.90.11 Nickel12.01.516.30.79 Zinc10.21.294.20.53 Aluminum30.33.8212.41.56 Iron28.03.5314.01.77 Oil and grease100.012.60100.012.60 TSS150.018.91120.015.12 pH( 1)( 1)( 1)( 1) English units—pounds per 1 million ft 2 of area processed or coated Chromium0.760.100.310.04 Lead0.210.030.190.03 Nickel2.460.311.290.16 Zinc2.090.270.860.11 Aluminum6.210.782.540.32 Iron5.740.722.870.36 Oil and grease20.482.5820.482.58 TSS30.723.8724.583.10 pH( 1)( 1)( 1)( 1)

1 Within the range 7.5 to 10.0 at all times.

[47 FR 53184, Nov. 24, 1982, as amended at 50 FR 36543, Sept. 6, 1985]

AUTHORITY: Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the “Act”); 33 U.S.C. 1311, 1314 (b), (c), (e) and (g), 1316 (b) and (c), 1317 (b) and (c), and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217.

SOURCE: 47 FR 53184, Nov. 24, 1982, unless otherwise noted.

CITE AS: 40 CFR 466.13

§ 466.14 - Pretreatment standards for existing sources.

(a) Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for existing sources.

Subpart A—PSES

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average Milligrams per liter (mg/l) Chromium0.420.17 Lead0.150.13 Nickel1.411.00 Zinc1.330.56

(b) In cases where POTW find it necessary to impose mass effluent pretreatment standards the following equivalent mass standards are provided:

Subpart A—PSES

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average Metal preparation Coating operation Metal preparation Coating operation Metric units—mg/m 2 of area processed or coated Chromium16.820.536.810.22 Lead6.010.195.210.16 Nickel56.51.7840.11.26 Zinc53.31.6822.50.71 English units—lbs/1 million ft 2 of area processed or coated Chromium3.450.111.40.05 Lead1.230.041.070.03 Nickel11.60.378.200.26 Zinc10.90.354.60.15
[47 FR 53184, Nov. 24, 1982, as amended at 50 FR 36543, Sept. 6, 1985]

AUTHORITY: Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the “Act”); 33 U.S.C. 1311, 1314 (b), (c), (e) and (g), 1316 (b) and (c), 1317 (b) and (c), and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217.

SOURCE: 47 FR 53184, Nov. 24, 1982, unless otherwise noted.

CITE AS: 40 CFR 466.14

§ 466.15 - Pretreatment standards for new sources.

Except as provided in 40 CFR 403.7 and 403.13, any new source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources:

Subpart A—PSNS

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average Metal preparation Coating operation Metal prepartion Coating operation Metric units—mg/m 2 of area processed or coated Chromium3.70.471.50.19 Lead1.00.130.90.11 Nickel12.01.516.30.79 Zinc10.21.294.20.53 English units—pounds per 1 million ft 2 of area processed or coated Chromium0.760.100.310.04 Lead0.20.030.190.002 Nickel2.460.311.290.16 Zinc2.090.270.860.11
[47 FR 53184, Nov. 24, 1982, as amended at 50 FR 36543, Sept. 6, 1985]

AUTHORITY: Secs. 301, 304 (b), (c), (e), and (g), 306 (b) and (c), 307 and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, as amended by the Clean Water Act of 1977) (the “Act”); 33 U.S.C. 1311, 1314 (b), (c), (e) and (g), 1316 (b) and (c), 1317 (b) and (c), and 1361; 86 Stat. 816, Pub. L. 92-500; 91 Stat. 1567, Pub. L. 95-217.

SOURCE: 47 FR 53184, Nov. 24, 1982, unless otherwise noted.

CITE AS: 40 CFR 466.15