Collapse to view only § 421.2 - [Reserved]
General Provisions
- SUBPART A - Subpart A—Bauxite Refining Subcategory
- SUBPART B - Subpart B—Primary Aluminum Smelting Subcategory
- SUBPART C - Subpart C—Secondary Aluminum Smelting Subcategory
- SUBPART D - Subpart D—Primary Copper Smelting Subcategory
- SUBPART E - Subpart E—Primary Electrolytic Copper Refining Subcategory
- SUBPART F - Subpart F—Secondary Copper Subcategory
- SUBPART G - Subpart G—Primary Lead Subcategory
- SUBPART H - Subpart H—Primary Zinc Subcategory
- SUBPART I - Subpart I—Metallurgical Acid Plants Subcategory
- SUBPART J - Subpart J—Primary Tungsten Subcategory
- SUBPART K - Subpart K—Primary Columbium-Tantalum Subcategory
- SUBPART L - Subpart L—Secondary Silver Subcategory
- SUBPART M - Subpart M—Secondary Lead Subcategory
- SUBPART N - Subpart N—Primary Antimony Subcategory
- SUBPART O - Subpart O—Primary Beryllium Subcategory
- SUBPART P - Subpart P—Primary and Secondary Germanium and Gallium Subcategory
- SUBPART Q - Subpart Q—Secondary Indium Subcategory
- SUBPART R - Subpart R—Secondary Mercury Subcategory
- SUBPART S - Subpart S—Primary Molybdenum and Rhenium Subcategory
- SUBPART T - Subpart T—Secondary Molybdenum and Vanadium Subcategory
- SUBPART U - Subpart U—Primary Nickel and Cobalt Subcategory
- SUBPART V - Subpart V—Secondary Nickel Subcategory
- SUBPART W - Subpart W—Primary Precious Metals and Mercury Subcategory
- SUBPART X - Subpart X—Secondary Precious Metals Subcategory
- SUBPART Y - Subpart Y—Primary Rare Earth Metals Subcategory
- SUBPART Z - Subpart Z—Secondary Tantalum Subcategory
- SUBPART AA - Subpart AA—Secondary Tin Subcategory
- SUBPART AB -
- SUBPART AC - Subpart AC—Secondary Tungsten and Cobalt Subcategory
- SUBPART AD - Subpart AD—Secondary Uranium Subcategory
- SUBPART AE - Subpart AE—Primary Zirconium and Hafnium Subcategory
General Provisions
§ 421.1 - Applicability.
This part applies to facilities producing primary metals from ore concentrates and recovering secondary metals from recycle wastes which discharge or may discharge pollutants to waters of the United States or which introduce or may introduce pollutants into a publicly owned treatment works. The applicability of this part to alloying or casting of nonferrous metals is limited to alloying or casting of hot metal directly from the nonferrous metals manufacturing process without cooling. Remelting followed by alloying or cooling is included in the aluminum forming, nonferrous metals forming, or metal molding and casting point source categories.
§ 421.2 - [Reserved]
§ 421.3 - Monitoring and reporting requirements.
The following special monitoring requirements apply to all facilities controlled by this regulation:
(a) The monthly average regulatory values shall be the basis for the monthly average discharge in direct discharge permits and for pretreatment standards. Compliance with the monthly discharge limit is required regardless of the number of samples analyzed and averaged.
(b) Periodic analysis for cyanide are not required for a facility in the primary beryllium subcategory (subpart O of this part) when both of the following conditions are met:
(1) The first wastewater sample taken in each calandar year has been analyzed and found to contain less than 0.07 mg/1 cyanide.
(2) The owner or operator of the primary beryllium manufacturing facility certifies in writing to the POTW authority or permit issuing authority that cyanide is neither generated nor used in the beryllium manufacturing process employed at that facility.
§ 421.4 - Compliance date for pretreatment standards for existing sources (PSES).
The PSES compliance deadline in subparts A through M is March 8, 1987. The PSES compliance deadline for plants in subparts N through AE is September 20, 1988.
§ 421.5 - Removal allowances for pretreatment standards.
Removal allowances pursuant to 40 CFR 403.7(a) may be granted for the toxic metals limited in 40 CFR part 421 when used as indicator pollutants.