Collapse to view only § 180.1075 - Colletotrichum gloeosporioides f. sp. aeschynomene; exemption from the requirement of a tolerance.

§ 180.900 - Exemptions from the requirement of a tolerance.

An exemption from a tolerance shall be granted when it appears that the total quantity of the pesticide chemical in or on all raw agricultural commodities for which it is useful under conditions of use currently prevailing or proposed will involve no hazard to the public health.

[69 FR 23117, Apr. 28, 2004]

§ 180.905 - Pesticide chemicals; exemptions from the requirement of a tolerance.

(a) When applied to growing crops, in accordance with good agricultural practice, the following pesticide chemicals are exempt from the requirement of a tolerance:

(1) Petroleum oils.

(2) Piperonyl butoxide.

(3) Pyrethrins.

(4) Sabadilla.

(b) When applied to growing crops, in accordance with good agricultural practice, the pesticides rotenone or derris or cube roots are exempt from the requirement of a tolerance. There are no U.S. registrations for use of rotenone, derris, or cube roots on food commodities as of March 23, 2011.

(c) These pesticides are not exempted from the requirement of a tolerance when applied to a crop at the time of or after harvest.

[77 FR 59128, Sept. 26, 2012]

§ 180.910 - Inert ingredients used pre- and post-harvest; exemptions from the requirement of a tolerance.

Residues of the following materials are exempted from the requirement of a tolerance when used in accordance with good agricultural practice as inert (or occasionally active) ingredients in pesticide formulations applied to growing crops or to raw agricultural commodities after harvest:

Table 1 to 180.910

Inert ingredients Limits Uses Acetic acidCatalyst Acetic anhydrideSolvent, cosolvent Acetone Do. Alcohols, C2-33, manuf. of, by-products from, overheads (CAS Reg. No. 876065-86-0)Solvent Alkanoic and alkenoic acids, mono- and diesters of α-hydro-ω-hydroxypoly (oxyethylene) with molecular weight (in amu) range of 200 to 6,000Emulsifiers Alkyl (C8-C24) benzenesulfonic acid and its ammonium, calcium, magnesium, potassium, sodium, and zinc saltsSurfactants, related adjuvants of surfactants C10-C18-Alkyl dimethyl amine oxides (CAS Reg. Nos. 1643-20-5, 2571-88-2, 2605-79-0, 3332-27-2, 61788-90-7, 68955-55-5, 70592-80-2, 7128-91-8, 85408-48-6, and 85408-49-7)15% by weight in pesticide formulationSurfactant α-alkyl(C6-C15)-ω-hydroxypoly(oxyethylene)sulfate, and its ammonium, calcium, magnesium, potassium, sodium, and zinc salts, poly(oxyethylene) content averages 2-4 moles (CAS Reg. Nos.: 3088-31-1, 3694-74-4, 9004-82-4, 9004-84-6, 9021-91-4, 9086-52-6, 13150-00-0, 15826-16-1, 25446-78-0, 26183-44-8, 27140-00-7, 27731-62-0, 32612-48-9, 34431-25-9, 35015-74-8, 50602-06-7, 52286-18-7, 52286-19-8, 54116-08-4, 55901-67-2, 61702-79-2, 61894-66-4, 62755-21-9, 63428-85-3, 63428-86-4, 63428-87-5, 65086-57-9, 65086-79-5, 65104-74-7, 65122-38-5, 67674-66-2, 67762-19-0, 67762-21-4, 67845-82-3, 67845-83-4, 67923-90-4, 68037-05-8, 68037-06-9, 68171-41-5, 68424-50-0, 68511-39-7, 68585-34-2, 68610-66-2, 68611-29-0, 68611-55-2, 68649-53-6, 68890-88-0, 68891-29-2, 68891-30-5, 68891-38-3, 69011-37-6, 73665-22-2, 75422-21-8, 78330-16-2, 78330-17-3, 78330-25-3, 78330-26-4, 78330-27-5, 78330-28-6, 78330-29-7, 78330-30-0, 96130-61-9, 106597-03-9, 110392-50-2, 119432-41-6, 125301-88-4, 125301-89-5, 125301-92-0, 125736-54-1, 157627-92-4, 157707-85-2, 160104-51-8, 160901-27-9, 160901-28-0, 160901-29-1, 160901-30-4, 161025-28-1, 161074-79-9, 162063-19-6, 219756-63-5)Not to exceed 30% of formulationSurfactants, related adjuvants of surfactants. α-alkyl (C12-C15)-ω-hydroxypoly (oxypropylene) poly (oxyethylene) copolymers (where the poly (oxypropylene) content is 3-60 moles and the poly (oxyethylene) content is 5-80 moles)Not more than 20% of pesticide formulationsSurfactant α-Alkyl-ω-hydroxypoly (oxypropylene) and/or poly (oxyethylene) polymers where the alkyl chain contains a minimum of six carbons (CAS Reg. Nos.: 9002-92-0; 9004-95-9; 9004-98-2; 9005-00-9; 9035-85-2; 9038-29-3; 9038-43-1; 9040-05-5; 9043-30-5; 9087-53-0; 25190-05-0; 24938-91-8; 25231-21-4; 251553-55-6; 26183-52-8; 26468-86-0; 26636-39-5; 26636-40-8; 27252-75-1; 27306-79-2; 31726-34-8; 32128-65-7; 34398-01-1; 34398-05-5; 37251-67-5; 37311-00-5; 37311-01-6; 37311-02-7; 37311-04-9; 39587-22-9; 50861-66-0; 52232-09-4; 52292-17-8; 52609-19-5; 57679-21-7; 59112-62-8; 60636-37-5; 60828-78-6; 61702-78-1; 61723-78-2; 61725-89-1; 61791-13-7; 61791-20-6; 61791-28-4; 61804-34-0; 61827-42-7; 61827-84-7; 62648-50-4; 63303-01-5; 63658-45-7; 63793-60-2; 64366-70-7; 64415-24-3; 64415-25-4; 64425-86-1; 65104-72-5; 65150-81-4; 66455-14-9: 66455-15-0; 67254-71-1; 67763-08-0; 68002-96-0; 68002-97-1; 68131-39-5; 68131-40-8; 68154-96-1; 68154-97-2; 68154-98-3; 68155-01-1; 68213-23-0; 68213-24-1; 68238-81-3; 68238-82-4; 68409-58-5; 68409-59-6; 68439-30-5; 68439-45-2; 68439-46-3; 68439-48-5; 68439-49-6; 68439-50-9; 68439-51-0; 68439-53-2; 68439-54-3; 68458-88-8; 68526-94-3; 68526-95-4; 68551-12-2; 68551-13-3; 68551-14-4; 68603-20-3; 68603-25-8; 68920-66-1; 68920-69-4; 68937-66-6; 68951-67-7; 68954-94-9; 68987-81-5; 68991-48-0; 69011-36-5; 69013-18-9; 69013-19-0; 69227-20-9; 69227-21-0; 69227-22-1; 69364-63-2; 70750-27-5; 70879-83-3; 70955-07-6; 71011-10-4; 71060-57-6; 71243-46-4; 72066-65-0; 72108-90-8; 72484-69-6; 72854-13-8; 72905-87-4; 73018-31-2; 73049-34-0; 74432-13-6; 74499-34-6; 78330-19-5; 78330-20-8; 78330-21-9; 78330-23-1; 79771-03-2; 84133-50-6; 85422-93-1; 97043-91-9; 97953-22-5; 102782-43-4; 103331-86-8; 103657-84-7; 103657-85-8; 103818-93-5; 103819-03-0; 106232-83-1; 111905-54-5; 116810-31-2; 116810-32-3; 116810-33-4; 120313-48-6; 120944-68-5; 121617-09-2; 126646-02-4; 126950-62-7; 127036-24-2; 139626-71-4; 152231-44-2; 154518-36-2; 157627-86-6; 157627-88-8; 157707-41-0; 157707-43-2; 159653-49-3; 160875-66-1; 160901-20-2; 160901-09-7; 160901-19-9; 161025-21-4; 161025-22-5; 161133-70-6; 166736-08-9; 169107-21-5; 172588-43-1; 176022-76-7; 196823-11-7; 287935-46-0; 288260-45-7; 303176-75-2; 954108-36-2; 2222805-23-2; 2409830-33-5)Surfactants, related adjuvants of surfactants α-alkyl (minimum C6 linear, branched, saturated and/or unsaturated)-ω-hydroxypolyoxyethylene polymer with or without polyoxypropylene, mixture of di- and monohydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts of the phosphate esters; minimum oxyethylene content is 2 moles; minimum oxypropylene content is 0 moles (CAS Reg. Nos.: 9004-80-2, 9046-01-9, 26982-05-8, 31800-89-2, 37280-82-3, 37281-86-0, 39341-09-8, 39341-65-6, 39464-66-9, 39464-69-2, 42612-52-2, 50643-20-4, 50668-50-3, 51325-10-1, 51884-64-1, 52019-36-0, 57486-09-6, 58206-38-5, 58318-92-6, 58857-49-1, 59112-71-9, 60267-55-2, 61837-79-4, 62362-49-6, 62482-61-5, 63747-86-4, 63887-54-7, 63887-55-8, 66020-37-9, 66272-25-1, 66281-20-7, 67711-84-6, 67786-06-5, 67989-06-4, 68070-99-5, 68071-17-0, 68071-35-2, 68071-37-4, 68130-44-9, 68130-45-0, 68130-46-1, 68130-47-2, 68186-29-8, 68186-34-5, 68186-36-7, 68186-37-8, 68238-84-6, 68311-02-4, 68311-04-6, 68332-75-2, 68389-72-0, 68400-75-9, 68413-78-5, 68425-73-0, 68425-75-2, 68439-39-4, 68458-48-0, 68511-15-9, 68511-36-4, 68511-37-5, 68551-05-3, 68585-15-9, 68585-16-0, 68585-17-1, 68585-36-4, 68585-39-7, 68603-24-7, 68607-14-7, 68610-64-0, 68610-65-1, 68649-29-6, 68649-30-9, 68650-84-0, 68815-11-2, 68855-46-9, 68856-03-1, 68890-90-4, 68890-91-5, 68891-12-3, 68891-13-4, 68891-26-9, 68908-64-5, 68909-65-9, 68909-67-1, 68909-69-3, 68921-24-4, 68921-60-8, 68954-87-0, 68954-88-1, 68954-92-7, 68987-35-9, 69029-43-2, 69980-69-4, 70247-99-3, 70248-14-5, 70844-96-1, 70903-63-8, 71965-23-6, 71965-24-7, 72480-27-4, 72623-67-7, 72623-68-8, 72828-56-9, 72828-57-0, 73018-34-5, 73038-25-2, 73050-08-5, 73050-09-6, 73361-29-2, 73378-71-9, 73378-72-0, 73559-42-9, 73559-43-0, 73559-44-1, 73559-45-2, 74499-76-6, 76930-25-1, 78041-18-6, 78330-22-0, 78330-24-2, 82465-25-6, 84843-37-8, 91254-26-1, 93925-54-3, 95014-34-9, 96416-89-6, 99924-51-3, 103170-31-6, 103170-32-7, 106233-09-4, 106233-10-7, 108818-88-8, 110392-49-9, 111798-26-6, 111905-50-1, 116671-23-9, 117584-36-8, 119415-05-3, 120913-45-3, 121158-61-0, 121158-63-2, 123339-53-7, 125139-13-1, 125301-86-2, 125301-87-3, 126646-03-5, 129208-04-4, 129870-77-5, 129870-80-0, 130354-37-9, 136504-88-6, 143372-50-3, 143372-51-4, 144336-75-4, 146815-57-8, 151688-56-1, 154518-39-5, 154518-40-8, 155240-11-2, 157627-92-4, 159704-69-5, 160498-49-7, 160611-24-5, 171543-66-1, 172027-16-6, 172274-69-0, 176707-42-9, 181963-82-6, 188741-55-1, 191940-53-1, 210493-60-0, 210993-53-6, 246159-55-7, 251298-11-0, 261627-68-3, 290348-69-5, 290348-70-8, 317833-96-8, 340681-28-9 , 422563-19-7, 422563-26-6, 522613-09-8, 717140-06-2, 717140-09-5, 717827-29-7, 762245-80-7, 762245-81-8, 866538-89-8, 866538-90-1, 873662-29-4, 913068-96-9, 936100-29-7, 936100-30-0, 1072943-56-6, 1087209-87-7, 1174313-54-2, 1187742-89-7, 1187743-35-6, 1205632-03-6, 1233235-49-8, 1451002-50-8, 1456802-88-2, 1456802-89-3, 1456803-12-5) α-alkyl (minimum C6 linear, branched, saturated and/or unsaturated)-ωhydroxypolyoxyethylene polymer with or without polyoxypropylene, mixture of di- and monohydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts of the phosphate esters; minimum oxyethylene content is 2 moles; minimum oxypropylene content is 0 moles (CAS Reg. Nos.: 9004-80-2, 9046-01-9, 26982-05-8, 31800-89-2, 37280-82-3, 37281-86-0, 39341-09-8, 39341-65-6, 39464-66-9, 39464-69-2, 42612-52-2, 50643-20-4, 50668-50-3, 51325-10-1, 51884-64-1, 52019-36-0, 57486-09-6, 58206-38-5, 58318-92-6, 58857-49-1, 59112-71-9, 60267-55-2, 61837-79-4, 62362-49-6, 62482-61-5, 63747-86-4, 63887-54-7, 63887-55-8, 66020-37-9, 66272-25-1, 66281-20-7, 67711-84-6, 67786-06-5, 67989-06-4, 68070-99-5, 68071-17-0, 68071-35-2, 68071-37-4, 68130-44-9, 68130-45-0, 68130-46-1, 68130-47-2, 68186-29-8, 68186-34-5, 68186-36-7, 68186-37-8, 68238-84-6, 68311-02-4, 68311-04-6, 68332-75-2, 68389-72-0, 68400-75-9, 68413-78-5, 68425-73-0, 68425-75-2, 68439-39-4, 68458-48-0, 68511-15-9, 68511-36-4, 68511-37-5, 68551-05-3, 68585-15-9, 68585-16-0, 68585-17-1, 68585-36-4, 68585-39-7, 68603-24-7, 68607-14-7, 68610-64-0, 68610-65-1, 68649-29-6, 68649-30-9, 68650-84-0, 68815-11-2, 68855-46-9, 68856-03-1, 68890-90-4, 68890-91-5, 68891-12-3, 68891-13-4, 68891-26-9, 68908-64-5, 68909-65-9, 68909-67-1, 68909-69-3, 68921-24-4, 68921-60-8, 68954-87-0, 68954-88-1, 68954-92-7, 68987-35-9, 69029-43-2, 69980-69-4, 70247-99-3, 70248-14-5, 70844-96-1, 70903-63-8, 71965-23-6, 71965-24-7, 72480-27-4, 72623-67-7, 72623-68-8, 72828-56-9, 72828-57-0, 73018-34-5, 73038-25-2, 73050-08-5, 73050-09-6, 73361-29-2, 73378-71-9, 73378-72-0, 73559-42-9, 73559-43-0, 73559-44-1, 73559-45-2, 74499-76-6, 76930-25-1, 78041-18-6, 78330-22-0, 78330-24-2, 82465-25-6, 84843-37-8, 91254-26-1, 93925-54-3, 95014-34-9, 96416-89-6, 99924-51-3, 103170-31-6, 103170-32-7, 106233-09-4, 106233-10-7, 108818-88-8, 110392-49-9, 111798-26-6, 111905-50-1, 116671-23-9, 117584-36-8, 119415-05-3, 120913-45-3, 121158-61-0, 121158-63-2, 123339-53-7, 125139-13-1, 125301-86-2, 125301-87-3, 126646-03-5, 129208-04-4, 129870-77-5, 129870-80-0, 130354-37-9, 136504-88-6, 143372-50-3, 143372-51-4, 144336-75-4, 146815-57-8, 151688-56-1, 154518-39-5, 154518-40-8, 155240-11-2, 157627-92-4, 159704-69-5, 160498-49-7, 160611-24-5, 171543-66-1, 172027-16-6, 172274-69-0, 176707-42-9, 181963-82-6, 188741-55-1, 191940-53-1, 210493-60-0, 210993-53-6, 2275654-37-8, 246159-55-7, 251298-11-0, 261627-68-3, 290348-69-5, 290348-70-8, 317833-96-8, 340681-28-9 , 422563-19-7, 422563-26-6, 522613-09-8, 717140-06-2, 717140-09-5, 717827-29-7, 762245-80-7, 762245-81-8, 866538-89-8, 866538-90-1, 873662-29-4, 913068-96-9, 936100-29-7, 936100-30-0, 1072943-56-6, 1087209-87-7, 1174313-54-2, 1187742-89-7, 1187743-35-6, 1205632-03-6, 1233235-49-8, 1451002-50-8, 1456802-88-2, 1456802-89-3, 1456803-12-5)Not to exceed 30% by weight in pesticide formulationsSurfactants, related adjuvants of surfactants. N-alkyl (C8-C18) primary amines and their acetate salts where the alkyl group is linear and may be saturated and/or unsaturated (CAS Reg. Nos. 61790-57-6, 61790-58-7, 61790-59-8, 61790-60-1, 61788-46-3, 61790-33-8, 68155-38-4)Concentration in formulated end-use products not to exceed 10% by weight in herbicide products, 4% by weight in insecticide products, and 4% by weight in fungicide productsSurfactants, related adjuvants of surfactants Alkyl (C8-C18) sulfate and its ammonium, calcium, isopropylamine, magnesium, potassium, sodium, and zinc saltsSurfactants. Aluminum hydroxideDiluent, carrier Aluminum oxideDiluent Aluminum stearateSurfactant Amides, C5-C9, N-[3-(dimethylamino) propyl] (CAS Reg. No. 1044764-00-2)Surfactant Amides, C6-C12, N-[3-(dimethylamino) propyl] (CAS Reg. No. 1044764-06-8)Surfactant Ammonium bicarbonateSurfactant, suspending agent, dispersing agent Ammonium carbamateSynergist in aluminum phosphide formulations Ammonium chlorideIntensifier when used with ammonium nitrate as a dessicant or defoliant. Fire suppressant in aluminum phosphide and magnesium phosphide formulations Ammonium hydroxideSolvent, cosolvent, neutralizer, solubilizing agent Ammonium persulfate (CAS Reg.No. 7727-54-0)0.05%Preservative Ammonium salts of fatty acids (C8-C18 saturated) (CAS Reg. No. 5972-76-9, 63718-65-0, 16530-70-4, 32582-95-9, 2437-23-2, 191799-95-8, 16530-71-5, 93917-76-1, 5297-93-8, 94266-36-1, 1002-89-7)Surfactant Ammonium stearateSurfactant Ammonium sulfateSolid diluent, carrier Ammonium thiosulfateIntensifier when used with ammonium nitrate as desiccant or defoliant Amyl acetateSolvent, cosolvent, attractant Ascorbyl palmitatePreservative Attapulgite-type claySolid diluent, carrier, thickener Bacillus simplex strain BU288Emulsifier Bacillus thuringiensis fermentation solids and/or solublesDiluent, carrier BentoniteSolid diluent, carrier Benzoic acidPreservative for formulation Benzyl alcohol (CAS Reg. No. 100-51-6)60% by weight in pesticide formulationAdjuvant Bicyclo[3.1.1]hept-2-ene, 2,6,6-trimethyl-, homopolymer (Alpha-pinene, homopolymer)(CAS Reg. No. 25766-18-1)Surfactants, related adjuvants of surfactants Bicyclo[3.1.1]heptane, 6,6-dimethyl-2-methylene-, homopolymer (Beta-pinene, homopolymer) (CAS Reg. No. 25719-60-2)Surfactants, related adjuvants of surfactants Bicyclo[3.1.1]hept-2-ene, 2,6,6-trimethyl-, polymer with 6,6-dimethyl-2-methylenebicyclo [3.1.1] heptane (Copolymer of alpha- and beta-pinene) (CAS Reg. No. 31393-98-3)Surfactants, related adjuvants of surfactants 2-Bromo-2-nitro-1,3-propanediol (CAS Reg. No. 52-51-7)0.04% or less by weight of the total pesticide formulationIn-can preservative ButanePropellant Butanedioic acid, 2-sulfo-, C-C9-11-isoalkyl esters, C10-rich, disodium salts (CAS Reg. No. 815583-91-6)Not to exceed 10% by weight in pesticide formulation for agricultural useSurfactant n-Butanol (CAS Reg. No. 71-36-3)Solvent, cosolvent Butoxypolypropylene glycol (CAS Reg. No. 9003-13-8) n-Butyl benzoate (CAS Reg. No.136-60-7)Solvent di-n-Butyl adipate (CAS Reg. No. 105-99-7)Not to exceed 25% by weight of pesticide formulationPlasticizer in pesticide formulations for varroa mite control around bee hives n-Butyl-3-hydroxybutyrate (CAS Reg. No. 53605-94-0)Solvent Butylated hydroxyanisoleAntioxidant Butylated hydroxytoluene Do. Calcareous shaleSolid diluent carrier Calcite Do. Calcium carbonate Do. Calcium chlorideStabilizer Calcium phosphateSolid diluent, carrier Calcium hydroxide Do. Calcium hypochloriteSanitizing and bleaching agent Calcium lactate pentahydrate (CAS Reg. No. 5743-47-5)Nutrient, stabilizer Calcium oxideSolid diluent, carrier Calcium salt of partially dimerized rosin, conforming to 21 CFR 172.210Coating agent Calcium silicateSolid diluent, carrier Calcium stearate Do. Carbon Dioxide (CAS Reg. No. 124-38-9)NonePropellant Carrageenan, conforming to 21 CFR 172.620Minimum molecular weight (in amu): 100,000Thickener Ccocamidopropylamine oxide (CAS Reg. No. 68155-09-9)Not to exceed 6% by weight in the formulated product; only for use with glyphosateSurfactant. Cetyl alcohol (CAS Reg. No. 36653-82-4)Not more than 5.0% of pesticide formulationEvaporation retardant Charcoal, activatedMeets specifications in the Food Chemical CodexCarrier Coconut shellsSolid diluent and carrier Cod liver oilSolvent, cosolvent Croscarmellose sodium (CAS Reg. No. 74811-65-7)Disintegrant, solid diluent, carrier, and thickener n-Decyl alcohol (CAS Reg. No. 112-30-1)Solvent or co-solvent 5-decyne-4,7-diol, 2,4,7,9-tetramethyl- (CAS Reg. No. 126-86-3)surfactant, related adjuvant of surfactants and carriers. Deoxyribonucleic acid (DNA) sequences consisting solely of adenine, cytosine, guanine and thymine, of 300 or fewer base pairs, and which do not contain start codons or regulatory sequences necessary for the initiation of transcription or translationNo more than 1 ppm in pesticide formulationProduct identifier. Dialkyl (C8-C18) dimethyl ammonium chlorideNot more than 0.2% in silica, hydrated silicaFlocculating agent in the manufacture of silica, hydrated silica for use as a solid diluent, carrier Diatomite (diatomaceous earth)Solid diluent carrier Diethylaminoethanol, ethoxylated, propoxylated, reaction products with fatty acid dimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173188-75-4)Surfactant Diethylaminoethanol, ethoxylated, propoxylated, reaction products with fatty acid trimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173188-83-4)Surfactant Diethylaminethanol, ethoxylated, reaction product with fatty acid dimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173188-72-1)Surfactant Diethylaminoethanol, ethoxylated, reaction products with fatty acid trimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173188-81-2)Surfactant Diethylene glycol abietateSurfactants, related adjuvants of surfactants 1,1-Difluoroethane (CAS Reg. No. 75-37-6)In pesticide formulations used for insect control in food- and feed-handling establishments and animals; in bird repellent pesticide formulationsAerosol propellant Diglycerol (CAS Reg. No. 59113-36-9)Plasticizer. 1,2-Dihydro-6-ethoxy-2,2,4-trimethylquinoleneNot more than 0.02% of pesticide formulationAntioxidant Diisopropanolamine (CAS Reg. No. 110-97-4)Not to exceed 10% by weight of pesticide formulationNeutralizer or stabilizer Diisopropyl adipate (CAS Reg. No. 6938-94-9)40% in mosquito control formulationsSolvent, co-solvent Dimethyl adipate (CAS no. 627-93-0)NoneSolvent/co-solvent Dimethylaminoethanol, ethoxylated, propoxylated, reaction products with fatty acid dimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173188-42-5)Surfactant Dimethylaminoethanol, ethoxylated, propoxylated, reaction products with fatty acid trimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173188-67-4)Surfactant Dimethylaminoethanol, ethoxylated, reaction products with fatty acid dimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173188-38-9)Surfactant Dimethylaminoethanol, ethoxylated, reaction products with fatty acid trimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173188-49-2)Surfactant N,N-Dimethyl 9-decenamide (CAS Reg. No. 1356964-77-6)Not to exceed 20% by weight of pesticide formulationSurfactant, solvent 2,2-Dimethyl-1,3-dioxolane-4-methanol (CAS Reg. No.100-79-8)Solvent/cosolvent N,N-Dimethyldodecanamide (CAS Reg. No. 3007-53-2)Not to exceed 20% by weight of pesticide formulationSurfactant, solvent Dimethyl ether (methane, oxybis-) (CAS Reg. No. 115-10-6)Propellant Dimethyl glutarate (CAS no. 1119-40-0)NoneSolvent/co-solvent N,N-Dimethylnonanamide (CAS Reg. No. 6225-08-7)Not to exceed 20% by weight of pesticide formulationSolvent, co-solvent, and adjuvant 3,6-Dimethyl-4-octyn-3,6-diolNot more than 2.5% of pesticide formulationSurfactants, related adjuvants of surfactants Dimethyl succinate (CAS no. 106-65-0)NoneSolvent/co-solvent N,N-Dimethyltetradecanamide (CAS Reg. No. 3015-65-4)Not to exceed 20% by weight of pesticide formulationSurfactant, solvent Di-n-butyl carbonate (CAS Reg. No. 542-52-9)Solvent Dipropylene glycolSolvent, cosolvent Disodium phosphateAnticaking agent, conditioning agent Disodium zinc ethylenediaminetetraacetate dihydrideSequestrant Distillates, (Fishcher-Tropsch), heavy, C18-C50, branched, cyclic and linear (CAS Reg. No. 848301-69-9)Solvent, diluent and/or dust suppressant Distillates (petroleum), solvent-dewaxed heavy paraffinic (CAS Reg. No. 64742-65-0)Carrier 6-dodecyne-5,8-diol, 2,5,8,11-tetramethyl- (CAS Reg. No. 68227-33-8)surfactant, related adjuvant of surfactants and carriers. DolomiteSolid diluent, carrier Epoxidized linseed oilSurfactants, related adjuvants of surfactants Epoxidized soybean oil Do. Erucamide (CAS Reg. No. 112-84-5)Lubricant in pesticide formulations applied on the raw agricultural commodities honey and honeycomb. Escherichia coli strain K-12 P678-54 micellesEncapsulation of active ingredient. Ethanesulfonic acid, 2-hydroxy- (CAS Reg. No. 107-36-8)Chelator, sequestrant, or conditioning agent Ethanesulfonic acid, 2-hydroxy-, ammonium salts (CAS Reg. No. 57267-78-4) Do. Ethanesulfonic acid, 2-hydroxy-, calcium salts (CAS Reg. No. 10550-47-7) Do. Ethanesulfonic acid, 2-hydroxy-, magnesium salts (CAS Reg. No. 17345-56-1) Do. Ethanesulfonic acid, 2-hydroxy-, potassium salts (CAS Reg. No. 1561-99-5) Do. Ethanesulfonic acid, 2-hydroxy-, sodium salts (CAS Reg. No. 1562-00-1) Do. Ethanesulfonic acid, 2-hydroxy-, zinc salts (CAS Reg. No. 129756-32-7) Do. Ethyl acetateSolvent, cosolvent Ethyl alcohol Do. Ethyl esters of fatty acids derived from edible fats and oilsSolvent, cosolvent Ethyl maltol (CAS Reg. No.4940-11-8)Not more than 0.2 % of the pesticide formulationOdor masking agent Ethylene glycol (CAS Reg. No. 107-21-1)Without limitationEncapsulating agent for pesticides being applied post-harvest as residual, and crack and crevice sprays in and around food and nonfood areas of residential and nonresidential structures, including food handling establishments Ethylene oxide adducts of 2,4,7,9-tetramethyl-5-decynediol, the ethylene oxide content averages 3.5, 10 or 30 moles (CAS Reg. No. 9014-85-1)Surfactants, related adjuvants of surfactants Ethylenebis(oxyethylene) bis[3-(5-tert-butyl-4-hydroxy-m-tolyl) propionate] (CAS Reg. No. 36443-68-2)1% by weightStabilizer (S,S)-Ethylenediamine disuccinic acid trisodium salt (CAS Reg. No. 178949-82-1)Sequestrant or chelating agent Ethylenediaminetetraacetic acid3% of pesticide formulationSequestrant Ethylenediaminetetraacetic acid, tetrasodium salt5% of pesticide formulationSequestrant 2-Ethyl-1-hexanol (CAS Reg. No. 104-76-7)Not more than 10% of pesticideSolvent, adjuvant of surfactants Fatty acids, conforming to 21 CFR 172.860Binder, defoaming agent, lubricant Fatty acids, tall-oil, esters with triethanolamine, ethoxylated (CAS Reg. No. 68605-38-9)10Surfactant. Fatty acids, C8-18 and C18-unsatd., esters with polyethylene glycol ether with triethanolamine (3:1) (CAS Reg. No. 2464873-19-4)10Surfactant. FD&C Blue No. 1Not more than 0.2% of pesticide formulationDye FD&C Red No. 40 (CAS Reg. No. 25956-17-6) conforming to 21 CFR 74.340Not to exceed 0.002% by weight of pesticide formulationDye, coloring agent Ferric Citrate (CAS Reg. No. 2338-05-8)Stabilizer Ferric sulfateSolid diluent, carrier Formic Acid (CAS Reg. No. 64-18-6)25%adjuvant, pH buffering agent, pH adjuster Fulvic acid (CAS Reg. No. 479-66-3)Carrier FurcelleranThickener D-Glucitol, 1-deoxy-1-(methyl-amino)-, N-C8-10 acyl derivatives (CAS Reg. No. 1591782-62-5)Not more than 40% by weight in pesticide formulationSurfactant D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-methyl- (CAS Reg. No. 5306-85-4); D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-ethyl- (CAS Reg. No. 30915-81-2); D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-propyl) (CAS Reg. No.107644-13-3); D-glucitol, 1,4:3,6-dianhydro-2,5-bis-O-(1-methylethyl)-,(iso-propyl diether) (CAS Reg. No. 103594-41-8); D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-butyl- (CAS Reg. No. 103594-42-9); D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(1-methylpropyl)-, (CAS Reg. No. not assigned); and D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(2-methylpropyl)-, (CAS Reg. No. not assigned)solvent, co-solvent, viscosity modifier, and adjuvant D-glucopyranose, oligomeric, C10-16-alkyl glycosides (CAS Reg. No. 110615-47-9)Surfactant D-glucopyranose, oligomeric, 6-(dihydrogen citrates), C8-20 branched and linear alkyl glycosides, sodium salts (CAS Reg. No. 1079993-97-7)Surfactant D-glucopyranose, oligomeric, 6-(hydrogen sulfosuccinates), C8-20 branched and linear alkyl glycosides, sodium salts (CAS Reg. No. 1079993-92-2)Surfactant D-glucopyranose, oligomeric, lactates, C8-20 branched and linear alkyl glycosides (CAS Reg. No. 1079993-94-4)Surfactant D-glucopyranose, oligomeric, maleates, C10-16-alkyl glycosides, sulfonated, potassium salts (CAS Reg. No. 2587364-77-8)Surfactant. D-glucopyranose, oligomeric, maleates, C9-11-branched and linear alkyl glycosides, sulfonated, potassium salts (CAS Reg. No. 1228577-37-4)Surfactant. D-glucopyranose, oligomeric, maleates, decyl octyl glycosides, sulfonated, potassium salts (CAS Reg. No. 2585031-35-0)Surfactant. D-glucurono-6-deoxy-L-manno-D-glucan, acetate, calcium magnesium potassium sodium salt (diutan gum) (CAS Reg. No. 595585-15-2)Stabilizer/suspension agent. Glycerides, edible fats and oils derived from plants and animals, reaction products with sucrose (CAS Reg. Nos. 100403-38-1, 100403-41-6, 100403-39-2, 100403-40-5)Emulsifier, dispersing agent Glycerol mono-, di-, and triacetateSolvent, cosolvent Glyceryl monostearateEmulsifier Granite Do. GraphiteSolid diluent, carrier Gum arabic (acacia)Surfactant, suspending agent, dispersing agent GypsumSolid diluent, carrier HexamethylenetetramineFor use in citrus washing solutions only at not more than 1%Preservative 3-hexen-1-ol, (3Z)- (CAS Reg. No. 928-96-1)Not more than 0.4% of the pesticide formulationOdorant, alerting agent n-Hexyl alcohol (CAS Reg. No. 111-27-3)Solvent, cosolvent C9 rich aromatic hydrocarbons (CAS Reg. No. 64742-95-6)Solvent C10-11 rich aromatic hydrocarbons (CAS Reg. No. 64742-94-5)Solvent C11-12 rich aromatic hydrocarbons (CAS Reg. No. 64742-94-5)Solvent Hydrochloric acidSolvent, neutralizer 1,4-Bis[[3-[2-(2-hydroxyethoxy)ethoxy]propyl]amino]-9,10-anthracenedione (CAS Reg. No. 123944-63-8)0.5% by weightDye, coloring agent Hydroxyethylmorpholine, ethoxylated, propoxylated, reaction products with fatty acid dimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173189-06-4)Surfactant Hydroxyethylmorpholine, ethoxylated, propoxylated, reaction products with fatty acid trimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173189-17-7)Surfactant Hydroxyethylmorpholine, ethoxylated, reaction products with fatty acid dimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173189-00-8)Surfactant Hydroxyethylmorpholine, ethoxylated, reaction products with fatty acid trimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173189-09-7)Surfactant Hydroxyethylpiperidine, ethoxylated, propoxylated, reaction products with fatty acid dimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173189-22-4Surfactant Hydroxyethylpiperidine, ethoxylated, propoxylated, reaction products with fatty acid trimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173189-28-0)Surfactant Hydroxyethylpiperidine, ethoxylated, reaction products with fatty acid dimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173189-20-2)Surfactant Hydroxyethylpiperidine, ethoxylated, reaction products with fatty acid trimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173189-25-7)Surfactant Hydroxyethylidine diphosphonic acid (HEDP) (CAS Reg. No. 2809-21-4)For use in antimicrobial pesticide formulations at not more than 1 percentStabilizer, chelator Iron oxideSolid diluent, carrier Iron oxide yellow (CAS Reg. No. 20344-49-4)Not to exceed 0.15% by weight of pesticide formulationColorant in pesticide formulations for varroa mite control around bee hives Isoamyl acetate (CAS Reg. No. 123-92-2)Buffering agent Isobutane (CAS Reg. No. 75-28-5)NonePropellant Isobutyl Acetate (CAS Reg. No. 110-19-0)Solvent Isobutyl isobutyrate (CAS Reg. No. 97-85-8)NoneSolvent 2-Isobutyl-2-methyl-1,3-dioxolane-4-methanol (CAS Reg. No. 5660-53-7)Solvent/Co-solvent Isobutyric Acid (CAS Reg. No. 79-31-2)Solvent Isopropyl-3-hydroxybutyrate (CAS Reg. No. 54074-94-1)Solvent Isopropyl myristate (CAS Reg. No. 110-27-0)Solvent Kaolinite-type claySolid diluent, carrier Lactic acidSolvent Lactic acid, 2-ethylhexyl ester (CAS Reg. No. 6283-86-9)Solvent Lactic acid, 2-ethylhexyl ester, (2S)- (CAS Reg. No. 186817-80-1)Solvent Lactic acid, n-propyl ester, (S); (CAS Reg. No. 53651-69-7)Solvent Lauryl alcoholSurfactant Lignin (CAS Reg. No. 9005-53-2)Surfactant, related adjuvants of surfactants Lignin, alkali (CAS Reg. No. 8068-05-1) Do. Lignin, alkali, oxidized, sodium salt (CAS Reg. No. 68201-23-0) Do. Lignin alkali reaction products with disodium sulfite and formaldehyde (CAS Reg. No. 105859-97-0) Do. Lignin alkali reaction products with formaldehyde and sodium bisulfite (CAS Reg. No. 68512-35-6) Do. Lignosulfonic acid (CAS Reg. No. 8062-15-5) Do. Lignosulfonic acid, ammonium calcium salt (CAS Reg. No. 12710-04-2) Do. Lignosulfonic acid, ammonium magnesium salt (CAS Reg. No. 123175-37-1) Do. Lignosulfonic acid, ammonium salt (CAS Reg. No. 8061-53-8) Do. Lignosulfonic acid, ammonium sodium salt (CAS Reg. No. 166798-73-8) Do. Lignosulfonic acid, calcium magnesium salt (CAS Reg. No. 55598-86-2) Do. Lignosulfonic acid, calcium salt (CAS Reg. No. 8061-52-7) Do. Lignosulfonic acid, calcium sodium salt (CAS Reg. No. 37325-33-0) Do. Lignosulfonic acid, ethoxylated, sodium salt (CAS Reg. No. 68611-14-3) Do. Lignosulfonic acid, magnesium salt (CAS Reg. No. 8061-54-9) Do. Lignosulfonic acid, potassium salt (CAS Reg. No. 37314-65-1) Do. Lignosulfonic acid, sodium salt (CAS Reg. No. 8061-51-6) Do. Lignosulfonic acid, sodium salt, oxidized (CAS Reg. No. 68855-41-4) Do. Lignosulfonic acid, sodium salt, polymer with formaldehyde and phenol (CAS Reg. No. 37207-89-9) Do. Lignosulfonic acid, sodium salt, sulfomethylated (CAS Reg. No. 68512-34-5) Do. Lignosulfonic acid, zinc salt (CAS Reg. No. 57866-49-6) Do. d-Limonene (CAS Reg. No. 5989-27-5)Solvent, fragrance Magnesium carbonateAnticaking agent, conditioning agent Magnesium chlorideSafener Magnesium limeSolid diluent, carrier Magnesium oxide Do. Magnesium silicate Do. Magnesium stearateSurfactant Magnesium sulfateSolid diluent, carrier, safener Methyl alcoholSolvent Methyl n-amyl ketone (CAS Reg. No. 110-43-0)Solvent, cosolvent Methyl 5-(dimethylamino)-2-methyl-5-oxopentanoate (1174627-68-9)Solvent Methyl esters of fatty acids derived from edible fats and oilsSolvent, cosolvent Methyl esters of higher fatty acids conforming to 21 CFR 573.640Antidusting agent, surfactant Methyl isobutyl ketoneSolvent 2-methyl-2,4-pentanediol (CAS Reg. No. 107-41-5)Without limitationGrowing crops and food animals Methyl isobutyrate (CAS Reg. No. 547-63-7)NoneSolvent 2-methyl-1,3-propanediol (CAS Reg. No. 2163-42-0)Solvent, surfactant Methylated siliconesAntifoaming agent Mono-, di-, and trimethylnaphthalenesulfonic acids and naphthalenesulfonic acids formaldehyde condensates, ammonium, sodium and potassium salts (CAS Reg. Nos. 9008-63-3, 9069-80-1, 9084-06-4, 36290-04-7, 91078-68-1, 141959-43-5, 68425-94-5, 67828-14-2)Surfactants, related adjuvants of surfactants MicaSolid diluent, carrier Mineral oil, U.S.P., or conforming to 21 CFR 172.878 or 178.3620(a) (CAS Reg. No. 8012-95-1)Diluent, carrier, and solvent Monoammonium phosphateNo more than 3.75% by weight in formulationPostharvest fumigation in formulation with aluminum phosphide Monoethanolamine (CAS Reg. No. 141-43-5)Not to exceed 3.35% by weight in pesticide formulationSolvent Mono- and diglycerides of C 8-C18 fatty acidsSurfactants, related adjuvants of surfactants Montmorillonite-type claySolid diluent, carrier Nitric acid (CAS Reg. No. 7697-37-2)10% by weight in pesticide formulationpH adjuster. Nonyl, decyl, and undecyl glycoside mixture with a mixture of nonyl, decyl, and undecyl oligosaccharides and related reaction products (primarily decanol and undecanol) produced as an aqueous-based liquid (50 to 65% solids) from the reaction of primary alcohols (containing 15 to 20% secondary alcohol isomers) in a ratio of 20% C9, 40% C10, and 40% C11 with carbohydrates (average glucose to alkyl chain ratio 1.3 to 1.8)Surfactant. α-(p-Nonylphenol)-ω-hydroxypoly(oxyethylene) mixture of dihydrogen phosphate and monohydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, potassium, sodium, and zinc salts of the phosphate esters; the nonyl group is a propylene trimer isomer and the poly(oxyethylene) content averages 4-14 or 30 moles (CAS Reg. Nos. 51811-79-1, 59139-23-0, 67922-57-0, 68412-53-3, 68553-97-9, 68954-84-7, 99821-14-4, 152143-22-1, 51609-41-7, 37340-60-6, 106151-63-7, 68584-47-4, 52503-15-8, 68458-49-1)Not to exceed 7% of pesticide formulationSurfactants, related adjuvants of surfactants α-(p-Nonylphenyl)-ω-hydroxypoly(oxyethylene) produced by the condensation of 1 mole of nonylphenol (nonyl group is a propylene trimer isomer) with an average of 4-14 or 30-90 moles of ethylene oxide; if a blend of products is used, the average number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be in the range of 4-14 or 30-90Surfactants, related adjuvants of surfactants α-(p-Nonylphenol)-ω-hydroxypoly(oxyethylene) sulfate, ammonium, calcium, magnesium, potassium, sodium, and zinc salts the nonyl group is propylene trimer isomer and the poly(oxyethylene) content averages 4 moles (CAS Reg. Nos. 9014-90-8, 9051-57-4, 9081-17-8, 68649-55-8, 68891-33-8Not to exceed 7% of pesticide formulationSurfactants, related adjuvants of surfactants 1-Octanal (CAS Reg. No. 124-13-0)Not more than 0.2% of the pesticide formulationOdor masking agent 1-Octanamine, N,N-dimethyl-, N-oxide (CAS Reg. No. 2605-78-9)Not to exceed 15% of pesticide formulationSurfactant n-Octyl alcohol (CAS Reg. No. 111-87-5)Solvent or co-solvent Octyl and decyl glucosides mixture with a mixture of octyl and decyloligosaccharides and related reaction products (primarily n- decanol) produced as an aqueous-based liquid (68-72% solids) from the reaction of straight chain alcohols (C8(45%), C10 (55%)) with anhydrous glucoseSurfactants, related adjuvants of surfactants Oleic acidDiluent Oleic acid diester of α-hydro-ω-hydroxypoly (oxyethylene); the poly(oxyethylene) having average molecular weight (in amu) 400Surfactants, related adjuvants of surfactants α-Oleoyl-ω-hydroxypoly(oxyethylene), average molecular weight (in amu) of 600Emulsifier Oleyl alcohol (CAS Reg. No. 143-28-215%Cosolvent Oxalic acidNo more oxalic acid should be used than is necessary to chelate calcium and in no case should more than 2 lb oxalic acid per acre be usedCalcium chelating hard water inhibitor Oxirane, 2-methyl-, polymer with oxirane, mono-2-propen-1-yl ether (CAS Reg. No. 9041-33-2) Palmitic acidDiluent Paraffin waxes and hydrocarbon waxes (CAS Reg. No. 8002-74-2); carboxypolymethylene resin (CAS Reg. No. 68153-22-0); and paraffin waxes and hydrocarbon, oxidized, lithium salts (CAS Reg. No. 68649-48-9)Flow aid, surface protectant, binder, carrier, coating agent or adjuvant. Pentaerythritol ester of maleic anhydride modified wood rosinPlasticizer Pentaerythritol tetrakis (3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS Reg. No. 6683-19-8)Not to exceed 5% by weight of the pesticide formulationAntioxidant, stabilizer Petrolatum, conforming to 21 CFR 172.880Coating agent Petroleum hydrocarbons, light odorless conforming to 21 CFR 172.884Solvent, diluent. Petroleum hydrocarbons, synthetic isoparaffinic, conforming to 21 CFR 172.882 Do. Petroleum naphtha, conforming to 21 CFR 172.250(d)Component of coating agent Petroleum wax, conforming to 21 CFR 172.886(d)Coating agent 2-Phenoxyethanol (CAS Reg. No. 122-99-6)0.2% by weight in pesticide formulationSolvent or co-solvent Phenylethyl acetate (CAS Reg. No. 103-45-7)Not to exceed 0.015% in pesticide formulationSolvent Phosphoric acidBuffer Polyammonium bisulfate (CAS Reg. No. 10043-02-4)Not to exceed 40% in non-residential formulations. Not to exceed 5% in outdoor and indoor formulations for residential useCarrier, adjuvant, buffer, and stabilizer Polyethylene, conforming to 21 CFR 177.1520(c)Binder, carrier, and coating agent Polyethylene glycol[α-hydro-ω-hydroxypoly(oxyethylene)]; mean molecular weight (in amu) 194 to 9,500 conforms to 21 CFR 178.3750Surfactants, related adjuvants of surfactants Polyethyleneimine (CAS Reg. No. 9002-98-6)Minimum number average molecular weight 1,300 amuEmulsifier, surfactant, adjuvant, dispersant and/or coating Polyglycerol esters of fatty acids conforming to 21 CFR 172.854Surfactants, related adjuvants of surfactants Polyglyceryl phthalate ester of coconut oil fatty acids, including fatty acid coco polymers with glyceryl and phthalic anhydride (CAS No. 67746-02-5) and coconut oil polymer with glyceryl and phthalic anhydride (CAS No. 66070-87-9)NoneSurfactants, related adjuvants of surfactants Poly(oxy-1,2-ethanediyl), α-acetyl-v -(2-propen-1-yloxy)- (CAS Reg. No. 27252-87-5) Poly (oxy-1,2-ethanediyl), α,α′-[[[4-[2-(4-methyl-2-benzothiazolyl)diazenyl]phenyl]imino]di-2,1-ethanediyl]bis[ω-hydroxy- (CAS Reg. No. 158172-12-4)Colorant. Poly(oxy-1,2-ethanediyl), α-(carboxymethyl)-ω-(nonylphenoxy) produced by the condensation of 1 mole of nonylphenol (nonyl group is a propylene trimer isomer) with an average of 4-14 or 30-90 moles of ethylene oxide. The molecular weight (in amu) ranges are 454-894 and 1598-4238Surfactant Poly(oxy-1,2-ethanediyl), α-methyl-v -(2-propen-1-yloxy)- (CAS Reg. No. 27252-80-8) Poly(oxy-1,2-ethanediyl), α-(1-oxoalkyl)-ω-methoxy-, where the alkyl chain contains a minimum of 6 and a maximum of 18 carbons and the oxyethylene content is 3-13 moles (CAS Reg. No. 53100-65-5, 194289-64-0, 34398-00-0, 9006-27-3, 32761-35-6, 53467-81-5, 518299-31-5, and 34397-99-4)Not to exceed 25% by weight in pesticide formulationStabilizer, solubilizing agent Poly(oxy-1,2-ethanediyl), α-[tris(1-phenylethyl)phenyl]-ω-hydroxy-, (CAS Reg. No. 99734-09-5)For use in post-harvest applications; not to exceed 15% by weight in pesticide formulationsSurfactants Poly(oxy-1,2-ethanediyl), α-(3-carboxy-1-oxosulfopropyl)-ω-hydroxy-, C10-12-alkyl ethers, disodium salts, the poly(oxyethylene) content averages 5-15 moles (CAS Reg. No. 68954-91-6)Not to exceed 10% by weight of pesticide formulationSurfactant Poly(oxy-1,2-ethanediyl), α-(3-carboxy-1-oxosulfopropyl)-ω-hydroxy-, C10-16-alkyl ethers, disodium salts, the poly(oxyethylene) content averages 5-15 moles (CAS Reg, No. 68815-56-5)Not to exceed 10% by weight of pesticide formulationSurfactant Poly(oxy-1,2-ethanediyl), α-(3-carboxy-1-oxosulfopropyl)-ω-hydroxy-, C12-14-alkyl ethers, disodium salts, the poly(oxyethylene) content averages 5-15 moles (CAS Reg. No. 1024612-24-5)Not to exceed 10% by weight of pesticide formulationSurfactant Poly(oxy-1,2-ethanediyl), α-(3-carboxy-1-oxosulfopropyl)-ω-(isotridecyloxy)-, sodium salt (1:2), the poly(oxyethylene) content averages 5-15 moles (CAS Reg. No. 1013906-64-3)Not to exceed 10% by weight of pesticide formulationSurfactant Polyoxyethylene (20) sorbitan monostearateSurfactants, related adjuvants of surfactants [Poly[oxy(methyl-1,2-ethanediyl)], α-[2-bis(2-hydroxyethyl)amino]propyl]-ω-hydroxy,-ether with α-hydro-ω-hydroxypoly(oxy-1,2-ethanediyl) (1:2), mono-C12-16 alkyl ethers, (CAS Reg. No. 176022-82-5)Not to exceed 15% in the formulated product; only for use with glyphosateSurfactant Polysorbate 65, conforming to 21 CFR 172.838Emulsifier Potassium aluminum silicateSolid diluent, carrier Potassium benzoate (Cas No. 582-25-2)NonePreservative Potassium hydroxideNeutralizer Potassium phosphateBuffer Potassium sulfateSolid diluent Propanamide, 2-hydroxy-N, N-dimethyl- (CAS Reg. No. 35123-06-9)Not to exceed 50% by weight in pesticide formulationSolvent/co-solvent 1-Propanaminium, 3-amino-N-(2-carboxyethyl)-N,N-dimethyl-, N-coco acyl derivatives, inner salts (CAS Reg. No. 499781-63-4)25% w/w in pesticide formulationAdjuvant or surfactant PropanePropellant 1,3-Propanediol (CAS Reg. No. 504-63-2)Solvent, co-solvent, diluent, or freeze-point depressant Propanoic acid, 2-methyl-, monoester with 2,2,4-trimethyl-1,3-pentanediol (CAS Reg. No. 25265-77-4)Solvent, co-solvent 2-Propanol, 1,1′,1″-nitrilotris- (CAS No. 122-20-3)Without limitationNeutralizer n-PropanolSolvent, cosolvent 2-Propenoic acid, 2-methyl-, polymer with ethyl 2-propenoate and methyl 2-methyl-2-propenoate, ammonium salt (CAS Registration No. 55989-05-4), minimum number average molecular weight (in amu), 18,900.Encapsulating agent, dispensers, resins, fibers and beads Propyl gallateAntioxidant Propyl p-hydroxybenzoatePreservative for formulations Propylene glycolSolvent, cosolvent Propylene glycol alginate (as defined in 21 CFR 172.858)Defoaming agent Propylene glycol monomethyl ether (CAS No. 107-98-2)nonesolvent 2,6-Pyridinedicarboxylic acid (CAS Reg. No. 499-83-2)Not to exceed 2 ppmStabilizer. PyrophylliteSolid diluent, carrier Pyrrolo[3,4-c]pyrrole-1,4-dione, 3,6-bis(4-chlorophenyl)-2,5-dihydro- (CAS Reg. No. 84632-65-5)Dye, coloring agent. Rhizobium inoculants (e.g. Sinorhizobium, Bradyrhizobium & Rhizobium)All leguminous food commodities Rosin, partially dimerized (as defined in 21 CFR 172.615)Surfactants, related adjuvants of surfactants Rosin, partially hydrogenated (as defined in 21 CFR 172.615) Do. Rosin, wood Do. Salicylaldehyde (CAS Reg. No. 90-02-8)Not to exceed 14% by weight of pesticide formulationPenetration aid Salts of fatty acids, conforming to 21 CFR 172.863Binder, emulsifier, anticaking agent SandSolid diluent, carrier Shellac, bleached; refined, food grade, arsenic and rosin-freeCoating agent Silane, hexadecyltrimethoxy-, hydrolysis products with silica (CAS Reg. No. 199876-45-4)No more than 0.6% by weight of the pesticide formulationStabilizing emulsion (Pickering emulsion) Silver nitrate (Cas Reg. No. 7761-88-8)For use on potatoes as post-harvest treatment to control sprouting at no more than 0.06% by weight in pesticide formulationsStabilizer SoapstoneSolid diluent Sodium acid pyrophosphateSurfactant, suspending agent, dispersing agent, buffer Sodium alkyl naphthalenesulfonates (CAS Reg. Nos. 68909-83-1, 68909-84-2, 68909-82-0, 27213-90-7, 26264-58-4, 27178-87-6, 111163-74-7, 908356-16-1, 25417-20-3, 25638-17-9, 145578-88-7, 1322-93-6, 1323-19-9, 7403-47-6, 68442-09-1, 127646-44-0, 908356-18-3)Limited to no more than 30% by weight in pesticide end-use productsSurfactants, related adjuvants of surfactants Sodium aluminum silicateSolid diluent, carrier Sodium dioctylsulfosuccinateSurfactants, related adjuvants of surfactants Sodium 1,4-dihexyl sulfosuccinate (CAS Reg. No. 3006-15-3)Surfactants, related adjuvants of surfactants Sodium 1,4-diisobutyl sulfosuccinate (CAS Reg. No. 127-39-9)Surfactants, related adjuvants of surfactants Sodium 1,4-dipentyl sulfosuccinate (CAS Reg. No. 922-80-5)Surfactants, related adjuvants of surfactants Sodium Formate (CAS Reg. No. 141-53-7)adjuvant, pH buffering agent Sodium DL-lactate (CAS Reg. No. 72-17-3)Surfactant Sodium hexametaphosphateSurfactant, emulsifier, wetting agent, suspending agent, dispersing agent, buffer Sodium hydroxideNeutralizer Sodium L-lactate (CAS Reg. No. 867-56-1)Surfactant Sodium metasilicateSurfactants, emulsifiers, wetting agents, dispersing agents, buffer Sodium monoalkyl and dialkyl (C6-C16) phenoxy benzenedisulfonates and related acids (CAS Reg. Nos. 147732-59-0, 147732-60-3, 169662-22-0, 70191-75-2, 36445-71-3, 39354-74-0, 70146-13-3, 119345-03-8, 149119-20-0, 149119-19-7, 119345-04-9, 28519-02-0, 25167-32-2, 30260-73-2, 65143-89-7, 70191-76-3)Not to exceed 20% in pesticide formulationsSurfactants, related adjuvants of surfactants Sodium α-olefinsulfonate (sodium C14-C16) (Olefin sulfonate)Surfactants, related adjuvants of surfactants SodiumN-oleoyl- N-methyl taurine (CAS Reg. No. 137-20-2)Surfactants, related adjuvants of surfactants Sodium and potassium salts of N-alkyl (C8-C18)-beta-iminodipropionic acid where the C8-C18 is linear and may be saturated and/or unsaturated (CAS Reg. Nos. 110676-19-2, 3655-00-3, 61791-56-8, 14960-06-6, 26256-79-1, 90170-43-7, 91696-17-2, 97862-48-1)Concentration in formulated end-use products not to exceed 30% by weight in pesticide formulationsSurfactants, related adjuvants of surfactants Sodium salt of sulfated oleic acidSurfactants, related adjuvants of surfactants Sodium silicateSurfactant, emulsifier, wetting agent, stabilizer, inhibitor Sodium starch glycolate (CAS Reg. No. 9063-38-1)Granular and tableted products only; not to exceed 8% of the formulated productDisintegrant Sodium sulfateSolid diluent, carrier Sodium tripolyphosphateBuffer, surfactant, suspending agent, dispersing agent, anticaking agent, conditioning agent Sorbic acid (CAS Reg. No. 110-44-1)Preservative for formulations Sorbitan fatty acid esters (fatty acids limited to C12, C14, C16, and C18 containing minor amounts of associated fatty acids) and their derivatives; the poly(oxyethylene) content averages 5-20 molesSurfactants, related adjuvants or surfactants. Soybean flourExpires May 24, 2005.Surfactant Soybean oil-derived fatty acidsSolvent, cosolvent Stearic acidDiluent α-Stearoyl-ω-hydroxypoly(oxyethylene), average molecular weight (in amu) of 600Emulsifier α-Stearoyl-ω-hydroxypoly(oxyethylene); the poly(oxyethylene) content averages either 8, 9, or 40 moles; if a blend of products is used, the average number of moles ethylene oxide reacted to produce any product that is a component of the blend shall be either 8, 9, or 40Surfactants, related adjuvants of surfactants Sucrose octaacetateAdhesive Sulfite liquors and cooking liquors, spent, oxidized (CAS Reg. No. 68514-09-0)Surfactant, related adjuvants of surfactants Sulfuric acid (CAS Reg. No.7664-93-9)Not to exceed 10% of the pesticide formulation; non-aerosol formulations onlypH Control agent Sweet orange peel tincture (CAS Reg. No. 8028-48-6)Not to exceed 10% (weight/weight) in pesticide formulationSurfactant, fragrance, related adjuvants of surfactants Synthetic paraffin and its succinic derivatives conforming to 21 CFR 172.275Carrier, binder, and carrying agent Synthetic petroleum wax, conforming to 21 CFR 172.888Binder, carrier, and coating agent TalcSolid diluent, carriers Tall oil; fatty acids not less than 58%, rosin acids not more than 44%, unsaponifiables not more than 8%Surfactants, related adjuvants of surfactants Tall oil fatty acids (CAS Reg. No. 61790-12-3)Solvent/carrier TartrazineDye Terpenes and terpenoids, turpentine oil, alpha-pinene fraction, polymd. (CAS Reg. No. 70750-57-1)Surfactants, related adjuvants of surfactants Tetraethyl orthosilicate (CAS Reg. No. 78-10-4)Not to exceed 2% by weight of pesticide formulationsBinder. 1,1,1,2-Tetrafluoroethane, (CAS Reg. No. 811-97-2)Aerosol propellant Trans-1,3,3,3-tetrafluoroprop-1-ene (CAS Reg. No. 29118-24-9)Propellant Tetrahydrofurfuryl alcohol (THFA) (CAS Reg. No 97-99-4)Expires February 9, 2008Solvent/cosolvent N,N,N′,N″,-tetrakis-(2-hydroxypropyl) ethylenediamine (CAS Reg. No. 102-60-3)Concentration in formulated end-use products not to exceed 20% by weight in pesticide formulationsStabilizer for formulation. α-[p-(1,1,3,3-tetramethylbutyl)phenyl]-ω-hydroxypoly(oxyethylene) produced by the condensation of 1 mole of p-(1,1,3,3-tetramethylbutyl)phenol with a range of 1-14 or 30-70 moles of ethylene oxide: If a blend of products is used, the average range number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be in the range of 1-14 or 30-70 (CAS Reg. Nos. 9036-19-5, 9002-93-1)Not to exceed 7% of pesticide formulationSurfactants related adjuvants of surfactants 2,4,7,9-Tetramethyl-5-decyn-4, 7-diolNot more than 2.5% of pesticide formulationSurfactants, related adjuvants of surfactants Tetrasodium pyrophosphateAnticaking agent, conditioning agent Thiosulfuric acid, disodium salt, anhydrous. (CAS Reg. No 7772-98-7)Dechlorinator, reducing agent Thiosulfuric acid, disodium salt, pentahydrate. (CAS Reg. No. 10102-17-7) Do. d-Alpha tocopherol (CAS Reg. No. 9-02-9NoneSafener d-Alpha tocopheryl acetate (CAS Reg. No. 58-95-7)None Do. dl-Alpha tocopherol (CAS Reg. No.10191-41-0)None Do. dl-Alpha tocopheryl acetate (CAS Reg. No. 7695-91-2)None Do. Tricalcium phosphateSurfactant, suspending agent, dispersing agent, anticaking agent, conditioning agent Trisodium phosphateSurfactant, emulsifier, wetting agent 1-undecanol (CAS Reg. No. 112-42-5), 1-tetradecanol (CAS Reg. No. 112-72-1), 1-octadecanol (CAS Reg. No. 112-92-5), 1-eicosanol (CAS Reg. No. 629-96-9), 1-docosanol (CAS Reg. No. 661-19-8), alcohols, C16-18, distn. residues (CAS Reg. No. 68603-17-8 & CAS Reg. No. 1190630-03-5), alkenes, C18-22, mixed with polyethylene, oxidized, hydrolyzed, distn. residues from C16-18 alcs. manuf. (CAS Reg. No. 1430895-61-6), alkenes, C18-22, mixed with polyethylene, oxidized, hydrolyzed, distn. residues from C20-22 alcs. manuf. (CAS Reg. No. 1430895-62-7)Carrier/Adjuvant and Coating Agent/Binder. VermiculiteSolid diluent, carrier. Vitamin E (CAS Reg. No. 1406-18-4)NoneSafener Walnut shellsLeaching inhibitor, binder for water-dispersible aggregates, sticker and suspension stabilizer Waxes and waxy substances, rice bran, oxidized (CAS Reg. No. 1883583-80-9)Flow aid, surface protectant, film-forming agent, carrier, coating agent, or adjuvant Wintergreen oilAttractant Wood flourDerived from wood free of chemical preservativesSolid diluent and carrier Xanthan gum-modified, produced by the reaction of xanthan gum and glyoxal (maximum 0.3% by weight)Not more than 0.5% of pesticide formulationSurfactant Xylene meeting the specifications listed in 21 CFR 172.884(b)(4)In pesticide formulations for grain storage onlySolvent, cosolvent Zeolite (hydrated alkali aluminum silicate)Solid diluent, carrier Zinc oxide (CAS Reg. No. 1314-13-2)Not more than 15% by weight in pesticide formulations when used as stabilizerCoating agent, stabilizer Zinc stearate (CAS Reg No. 557-05-1)Not to exceed 6 percent by weight of fumigant pesticide formulationLubricant Zinc sulfate (basic and monohydrate) Do. Zinc sulfate (basic and monohydrate)Solid diluent, carrier
[69 FR 23117, Apr. 28, 2004] Editorial Note:For Federal Register citations affecting § 180.910, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and at www.govinfo.gov.

§ 180.920 - Inert ingredients used pre-harvest; exemptions from the requirement of a tolerance.

Link to an amendment published at 89 FR 70527, Aug. 30, 2024.

The following materials are exempted from the requirement of a tolerance when used in accordance with good agricultural practice as inert (or occasionally active) ingredients in pesticide formulations applied to growing crops only:

Table 1 to § 180.920

Inert ingredients Limits Uses Acetic acid, 2-ethylhexyl ester (CAS Reg. No. 103-09-3)Not to exceed 50% by weight in pesticide formulationSolvent/Co-solvent Acetophenone (CAS Reg. No. 98-86-2)Attractant, solvent, co-solvent Adenosine (CAS Reg. No. 58-61-7)Maximum of 0.5% of formulationSynergist Adipic acid (CAS Reg. No. 124-04-9)Acidification or buffering agent; pH regulator Alder barkSeed germination stimulator Alkyl (C12-C16) dimethyl ammonio acetate (CAS Reg. Nos. 683-10-3, 2601-33-4 and 693-33-420% by weight in pesticide formulationSurfactant α-Alkyl (minimum C6 linear, branched, saturated and/or unsaturated)-ω-hydroxypolyoxyethylene polymer with or without polyoxypropylene, mixture of di- and monohydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts of the phosphate esters; minimum oxyethylene content is 2 moles; minimum oxypropylene content is 0 moles (CAS Reg. Nos. 9046-01-9, 37280-82-3, 39464-66-9, 42612-52-2, 50643-20-4, 52019-36-0, 58318-92-6, 60267-55-2, 61837-79-4, 67711-84-6, 68070-99-5, 68071-35-2, 68071-17-0, 68130-47-2, 68186-37-8, 68186-36-7, 68311-02-4, 68425-73-0, 68458-48-0, 68511-37-5, 68610-65-1, 68585-36-4, 68649-29-6, 68815-11-2, 68908-64-5, 68891-13-4, 73038-25-2, 78330-24-2, 108818-88-8, 154518-39-5, 317833-96-8, 873662-29-4, 936100-29-7, 936100-30-0)Not to exceed 30% of pesticide formulationSurfactants, related adjuvants of surfactants N-alkyl(C8-C18) dimethylamidopropylamines where the alkyl group is linear and may be saturated and/or unsaturated (CAS Reg. Nos. 109-28-4, 3179-80-4, 7651-02-7, 22890-10-4, 22890-11-5, 39669-97-1, 45267-19-4, 68140-01-2, 1147459-12-8, 146987-98-6)Not to exceed 20% by weight in herbicide formulationsSurfactants, related adjuvants of surfactants N-alkyl (C8-C18) primary amines and their acetate salts where the alkyl group is linear and may be saturated and/or unsaturated (CAS Reg. Nos. 61790-57-6, 61790-58-7, 61790-59-8, 61790-60-1, 61788-46-3, 61790-33-8, 68155-38-4)Concentration in formulated end-use products not to exceed 10% by weight in herbicide products, 4% by weight in insecticide products, and 4% by weight in fungicide productsSurfactants, related adjuvants of surfactants N,N-Bis-α-ethyl-ω-hydroxypoly(oxy-1,2-ethanediyl) C8-C18 saturated and unsaturated alkylamines; the poly(oxy-1,2-ethanediyl) content is 2-60 moles (CAS Reg. Nos. 10213-78-2, 25307-17-9, 26635-92-7, 26635-93-8, 288259-52-9, 58253-49-9, 61790-82-7, 61791-14-8, 61791-24-0, 61791-26-2, 61791-31-9, 61791-44-4, 68155-33-9, 68155-39-5, 68155-40-8,70955-14-5, 73246-96-5, 1266162-49-5)Not to exceed 25% in herbicide formulations and 10% in insecticide and fungicide formulationsSurfactants, related adjuvants of surfactants N,N-Bis-α-ethyl-ω-hydroxypoly(oxy-1,2-ethanediyl/oxy(methyl-1,2-ethanediyl) C8-C18 saturated and unsaturated alkylamines; the poly(oxy-1,2-ethanediyl/oxy(methyl-1,2-ethanediyl) content is 2-60 moles (CAS Reg. Nos. 68213-26-3, 68153-97-9, 75601-76-2)Not to exceed 25% in herbicide formulations and 10% in insecticide and fungicide formulationsSurfactants, related adjuvants of surfactants Aluminum sulfateSafener adjuvant Ammonium acetate (CAS No. 631-61-8)15%Buffering Agent. Ammonium chloride (CAS Reg. No. 12125-02-9)Carrier/nutrient Ammonium formate (CAS Reg. No. 540-69-2)Complexing or fixing agent Ammonium nitrate (CAS Reg. No. 6484-52-2)Adjuvant/ intensifier for herbicides Ammonium polyphosphate (CAS Reg. No. 68333-79-9)Sequestrant, buffer, or surfactant Quaternary ammonium compounds, benzylbis(hydrogenated tallow alkyl)methyl, bis(hydrogenated tallow alkyl)di-methylammonium salts with saponite (CAS Reg. No. 1588523-05-0)Not to exceed 1.0% by weight of pesticide formulationSuspending or structuring agent Quaternary ammonium compounds, benzylbis(hydrogenated tallow alkyl)methyl, bis(hydrogenated tallow alkyl)di-methylammonium salts with sepiolite (CAS Reg. No. 1574487-61-8)Not to exceed 2.0% by weight of pesticide formulation, asbestos free and containing less than 1% crystalline silicaSuspending or structuring agent Amylopectin, 2-hydroxypropyl ether, acid- (CAS Reg. No. 2756130-86-4)For seed treatment use onlyBinder, carrier, film-former. Trans-anethole (CAS Reg. No. 4180-23-8)Not to exceed 3% in pesticide formulationsFragrance. Baicalin anhydrous (CAS Reg. No. 21967-41-9)10% by weightStabilizer. Baicalin hydrate (CAS Reg. No. 206752-33-2)10% by weightStabilizer. Barium sulfateCarrier 1,4-Benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate, minimum number average molecular weight (in amu) 30,000 (CAS Reg. No. 55231-08-8)For use in honeybee hive miticide formulationsComponent of controlled release agent 1,2-Benzisothiazolin-3-oneNot more than 0.1% of formulation. Not more than 0.02 lb to be applied per acrePreservative/stabilizer Benzyl acetate (CAS Reg. No. 140-11-4)Solvent Beta Cyclodextrin, Methyl Ethers (CAS Reg. No. 128446-36-6)40% by weightStabilizer and solvent Boric acidSequestrant Buffalo gourd root powder (Cucurbita foetidissima root powder); or, Zucchini juice (Cucurbita pepo juice) or Hawkesbury melon Citrullus lanatus.No more than 2.5 lbs/acre/season (3.4 gm/acre/season of Cucurbitacin)Gustatory stimulant Butyl stearateDefoamer γ-ButyrolactoneSolvent C.I. Pigment Blue #15 (CAS Reg. No. 147-14-8; containing no more than 50 ppm polychlorinated biphenyls (PCBs))For seed treament use onlyDye, coloring agent C.I. Pigment Green #7 (CAS Reg. No. 1328-53-6; containing no more than 50 ppm polychlorinated biphenyls (PCBs))For seed treatment use onlyDye, coloring agent C.I. Pigment Red #112 (CAS Reg. No. 6535-46-2)Seed treatment use only. Limited to 10% w/w of pesticide formulationColoring agent C.I. Pigment Violet #23 (CAS Reg. No. 6358-30-1; containing no more than 20 ppb of polychlorinated dibenzo-p-dioxins and/or polychlorinated dibenzofurans)For seed treatment use onlyDye, coloring agent C.I. Pigment Yellow 1 (CAS Reg. No. 2512-29-0)Not to exceed 10% (weight/weight) in pesticide formulationColorant Calcium Pantothenate (CAS Reg. No. 137-08-6)0.1% by weight in pesticide formulationsEnzyme cofactor Calcium formate (CAS Reg. No. 544-17-2)Carrier Calcium gluconate (CAS Reg. No. 299-28-5)Sequestrant Camphor (CAS Reg. No. 76-22-2)Not more than 5% weight to weight (w/w) of pesticide formulationsDeodorant, melting point adjustment Carbon Black (CAS Reg. No. 1333-86-4)For seed treatment use onlyColorant Carbonic acid, dipotassium salt (CAS Reg. No. 584-08-7)Buffering agent Carbonic acid, dipotassium salt, trihydrate (CAS Reg. No. 18662-52-7)Buffering agent Carboxymethyl guar gum sodium salt (CAS Reg. No. 39346-76-4)Without limitationThicker/drift reduction agent Carboxymethyl-hydroxypropyl guar (CAS Reg. No. 68130-15-4)Without limitationThicker/drift reduction agent Carous chloride10 ppm in formulationTagging agent Carrageenan, conforming to 21 CFR 172.260Not more than 0.15% of pesticide formulationThickener and stabilizer for pesticide formulations applied to seeds before planting ChlorobenzeneContains not more than 1% impurities. Not for use after edible parts of plant begin to form. Do not graze livestock in treated areas within 48 hours after applicationSolvent, cosolvent 5-Chloro-2-methyl-4-isothiazolin-3-one (in combination with 2-methyl-4-isothiazolin-3-one)Not more than 0.0022% (22.5 ppm) in the formulation; 0.00022% (or 2.25 ppm) in the final solution applied to growing cropsPreservative Choline chloride (CAS Reg. No. 67-48-1)As a solvent Choline hydroxide (CAS Reg No. 123-41-1)Without limitationNeutralizer Cis-isomer of 1-(3-chloroallyl)-3,5,7-triaza-1-azoniaadamantane chloride (CAS Reg. No. 51229-78-8)Maximum of 0.14% by weight of formulationPreservative Coco alkyl dimethyl amines (CAS Reg. No. 61788-93-0)Not to exceed 0.5% in pesticide formulationEmulsifier Copper naphthenateNot more than 2.5% of formulation; application limited to before edible portions of plants begin to formMercaptan scavenger in technical pesticide Cumene sulfonic acid and its ammonium, calcium, magnesium, potassium, sodium and zinc salts (CAS Reg. Nos. 15763-76-5, 16066-35-6, 164524-02-1, 28085-69-0, 28348-53-0, 28631-63-2, 32073-22-6, 37475-88-0, 37953-05-2, and 90959-88-9)Surfactant, related adjuvant of surfactant CyclohexaneSolvent, cosolvent Cyclohexanone Do. Cysteine (CAS Reg. No. 52-90-4)Maximum of 0.5% of formulationSynergist D&C Green No. 6Dye D&C Red No. 17, technical gradeDye D&C Red No. 33 (CAS Reg. No. 3567-66-6); meeting the specifications listed in 21 CFR 74.1333Dye D&C Violet No. 2, technical gradeNot more than 0.005% of pesticide formulationDye Decanamide, N,N-dimethyl (CAS Reg. No. 14433-76-2)Emulsifier, solvent, cosolvent Dextrin, hydrogen 1-octenylbutanedioate (CAS Reg. No. 68070-94-0)For seed treatment use onlyBinder, carrier, film-former. Diammonium phosphate (CAS Reg. No. 7783-28-0)Buffer, surfactant dibenzylidene sorbitol (32647-67-9)Thinning agent DiethanolamineStabilizer, inhibitor for formulations used before crop emerges from soil Diethanolamine salts of alkyl (C8-C24) benzenesulfonic acid (CAS Reg. Nos. 26545-53-9, 67815-95-6, 67889-94-5, 67889-95-6, 68259-34-7, 68478-47-7, 68567-68-0, 68815-34-9, 68815-37-2, 68891-02-1, 68953-97-9, 84989-15-1, 85338-09-6, 90194-39-1, 90194-40-4, 90218-08-9)Not to exceed 7% of pesticide formulationSurfactants, related adjuvants of surfactants. Diethylene glycolDeactivator, adjuvant for formulations used before crop emerges from soil Diethylene Glycol (CAS No. 111-46-6)Without limitationSolvent, stabilizer and/or antifreeze Diethylene glycol and diethylene glycol monobutyl, monoethyl, and monomethyl ethersDeactivator for formulations used before crop emerges from soil, stabilizer Diethylene glycol mono butyl ether (CAS Reg. No. 112-34-5)Without limitationPesticide inert ingredient as a solvent, stabilizer and/or antifreeze Diethylene Glycol MonoEthyl Ether (CAS Reg. No. 111-90-0)Without limitationSolvent, stabilizer and/or antifreeze Dimethylaminopropylamine, isopropylamine, ethanolamine, and triethanolamine salts of alkyl (C8-C24) benzenesulfonic acid (CAS Reg. Nos. 3088-30-0, 12068-12-1, 26264-05-1, 26836-07-7, 27323-41-7, 55470-69-4, 58089-99-9, 61886-59-7, 61931-76-8, 67924-05-4, 68110-32-7, 68259-35-8, 68411-31-4, 68442-72-8, 68567-69-1, 68584-24-7, 68584-25-8, 68648-81-7, 68648-96-4, 68649-00-3, 68815-30-5, 68815-35-0, 68910-32-7, 68953-93-5, 68953-98-0, 70528-84-6, 72391-21-0, 84961-74-0, 85480-55-3, 85480-56-4, 85995-82-0, 90194-42-6, 90194-53-9, 90194-54-0, 90194-55-1, 90218-09-0, 90218-11-4, 90218-35-2, 96687-54-6, 99924-49-9, 121617-08-1, 157966-96-6, 193562-36-6, 319926-68-6, 877677-48-0, 1093628-27-3)Surfactants, related adjuvants of surfactants. 3,6-Dimethyl-4-octyn-3,6-diolIn pesticide formulations, for soil prior to planting or to plants before edible parts formSurfactants, related adjuvants of surfactants Dimethyl sulfoxide (CAS Reg. No. 67-68-5)Solvent/co-solvent. Dipotassium hydrogen phosphateBuffering agent Dipropylene glycol monomethyl etherStabilizer Douglas-fir bark, groundSolid diluent, carrier Dysprosium chloride10 ppm in formulationTagging agent 1,2-ethanediamine,N,N,N″, N″-tetramethyl-, polymer with 1,1′-oxybis[2-chloroethane] (CAS Reg. No. 31075-24-8)For use in pesticide formulations applied to cotton or wheat onlyAdjuvant or water conditioner (S,S)-Ethylenediaminedisuccinic acid (CAS Reg. No. 20846-91-7)Sequestrant or chelating agent Ethylene glycolAntifreeze, deactivator for all pesticides used before crop emerges from soil and in herbicides before or after crop emerges Ethylene glycol (CAS Reg. No. 107-21-1)Without limitationPesticide inert ingredient as a solvent, stabilizer and/or antifreeze. Ethylene glycol monobutyl ether2-EthylhexanolCosolvent, defoamer, solvent for all pesticides used before crop emerges from soil and in herbicides before or after crop emerges Europic chloride10 ppm in formulationTagging agent FD&C Blue No. 1 (CAS Reg. No. 3844-45-9)For seed treatment use onlyDye, coloring agent FD&C Blue No. 1, methyl-polyethylene glycol derivative (CAS Reg. No. 9079-34-9)For seed treatment use only; Number average molecular weight (in amu) is greater than 1,000; Not to exceed 5% of the formulated pesticide productDye, coloring agent FD&C Blue No. 1, polyethylene glycol derivative (CAS Reg. No. 9079-33-8)For seed treatment use only; Number average molecular weight (in amu) is greater than 1,000; Not to exceed 5% of the formulated pesticide productDye, coloring agent FD&C Red No. 40 (CAS Reg. No. 25956-17-6)For seed treatment use only. Not to exceed 2% by weight of the pesticide formulationDye, coloring agent Ferric chlorideNot greater than 2% of suspending, dispersing agent, pesticide formulation FluoroapatiteSolid diluent, carrier Folic acid (CAS Reg. No. 59-30-3)Maximum of 0.5% of formulationSynergist Gluconic acid (and sodium salt)Sequestrant l-Glutamic acid (C5 H9 NO4; CAS Reg. No. 56-86-0)Seet treatment use onlyPlant nutrient [alpha]-D-glucopyranoside, 2-ethylhexyl 6-O-[alpha]-D glucopyranosyl- (CAS Reg. No. 330980-61-5)Surfactant [alpha]-D-glucopyranoside, 2-ethylhexyl (CAS Reg. No. 125590-73-0)Surfactant Glutamine (CAS Reg. No. 56-85-9)Maximum of 0.5% of formulationSynergist Glycerol—propylene oxide polymer (CAS Reg. No. 25791-96-2)Component in water-soluble film Glyceryl triacetateStabilizer Glyceryl tris-12-hydroxystearateFlow control agent Glycine betaine (CAS Reg. No. 107-43-7)Plant nutrient GraphiteTreatment aid for seeds Guar hydroxypropyltrimethylammonium chloride (CAS Reg. No. 71329-50-5)Thickener/drift reduction agent HexamethylenetetramineStabilizer for carriers in solid pesticide formulations Hydrolyzed vegetable proteins from soyNot to exceed 25% of pesticide formulationpH adjusting agent, surfactant, adhesive. 2-(2′-hydroxy-3′,5′-di-tert-amylphenyl) benzotriazole (CAS Reg. No. 25973-55-1)Maximum concentration of 0.6% in insecticide formulations applied to adzuki beans, canola, chickpeas, cotton, faba beans, field peas, lentils, linola, linseed, lucerne, lupins, mung beans, navy beans, pigeon peas, safflower, sunflower, and vetchUltraviolet (UV) stabilizer 2-Hydroxy-4-n-octoxybenzophenone (CAS Reg. No. 1843-05-6)Not more than 0.2 pt of pesticide formulationLight stabilizer Hydroxypropyl guar gumThickener 2-Hydroxypropyl starch (CAS Reg. No. 9049-76-7)Adjuvant Isobornyl acetateSolvent Isobutyl alcohol Do. Isobutylene-butene copolymersFor soil application onlyBinder IsooctadecanolNot more than 2% of pesticide formulationDefoaming agent Konjac glucomannan (CAS Reg. No. 37220-17-0)Not to exceed 1.0% by weight in pesticide formulationThickener Lanthanum chloride10 ppm in formulationTagging agent. Magnesium nitrate (in combination with 2-methyl-4-isothiazolin-3-one and 5-chloro-2-methyl-4-isothiazolin-3-one)NonePreservation Maleic acidFor pesticide formulations applied to apples with a minimum preharvest interval of 21 daysStabilizer Maleic anhydride (CAS Reg. No. 108-31-6)Not to exceed 3.5% in pesticide formulations; or for pesticide formulations applied to apples with a minimum preharvest interval of 21 daysStabilizer Malic acid (CAS Reg. No. 6915-15-7)Buffering and stabilizing agent Manganese carbonatePlant nutrient D-mannose (CAS Reg. No. 3458-28-4)Sequestrant, binder, filler Mesityl oxideNot for use after edible parts of plant begin to form. Do not graze livestock in treated areas within 48 hours after applicationSolvent, cosolvent Methionine (CAS Reg. No. 59-51-8)Maximum of 0.5% of formulationSynergist Methyl alcohol Do. Methyl ethyl ketoneSurfactant Methyl p- hydroxybenzoatePreservative for formulations Methyl isobutyl ketoneSolvent, cosolvent 2-Methyl-4-isothiazolin-3-one (in combination with 5-chloro-2-methyl-4-isothiazolin-3-one)Not more than 0.0022% (22.5 ppm) in the formulation; 0.00022% (or 2.25 ppm) in the final solution applied to growing cropsPreservative Mono-, di-, and trimethylnapthalenesulfonic acids and napthalenesulfonic acids formaldehyde condensates, ammonium and sodium salts (CAS Reg. Nos. 9008-63-3, 9069-80-1, 9084-06-4, 36290-04-7, 91078-68-1, 141959-43-5, 68425-94-5)Surfactants, related adjuvants of surfactants Methyl oleateSurfactant 2-Methyl-2,4-pentanediolSolvent for formulations used before crop emerges from soil Methyl poly(oxyethylene)C8-C18 alkylammonium chlorides where the poly(oxyethylene) content is n = 2-15 and where C8-C18 alkyl is linear and may be saturated or unsaturated (CAS Reg. Nos. 3010-24-0, 18448-65-2, 70750-47-9, 22340-01-8, 67784-77-4, 64755-05-1, 61791-10-4, 28724-32-5, 28880-55-9, 68187-69-9, 68607-27-2, 60687-90-3Concentration in formulated end use products not to exceed 10% by weight in herbicide products and 5% by weight in all other pesticide productsSurfactants, related adjuvants of surfactants N-Methylpyrrolidone (CAS Reg. No. 872-504)Solvent, cosolvent Mixed phytosterols (consisting of campesterol, sitosterol and stigmasterol, with minor amounts of associated plant sterols) derived from edible vegetable oilsSurfactant Mono- and bis-(1H, 1H, 2H, 2H-perfluoroalkyl) phosphates where the alkyl group is even numbered and in the C6-C12 rangeNot more than 0.5% of pesticide formulation. Expires February 9, 2008Surfactant, related adjvants of surfactants Mono- and dialkyl (C8-C18) methylated ammonium chloride compounds, where the alkyl group(s) (C8-C18) are derived from coconut, cottonseed, soya, tallow, or hogfat fatty acidsSurfactants, related adjuvants of surfactants Morpholine 4-C6-12 Acyl Derivatives (CAS Reg. No. 887947-29-7)As a solvent Nicotinamide (CAS Reg. No. 98-92-0)Not to exceed 0.5% by weight of pesticide formulation as synergist; not to exceed 5% by weight of pesticide formulation as corrosion inhibitorSynergist, corrosion inhibitor α-(p-Nonylphenyl)-ω-hydroxypoly(oxyethylene); produced by the condensation of 1 mole of nonylphenol (nonyl group is a propylene trimer isomer) with an average of 4-14 or 30-100 moles of ethylene oxide; if a blend of products is used, the average number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be in the range 4-14 or 30-100Surfactant Octanamide, N,N-dimethyl (CAS Reg. No. 1118-92-9)Emulsifier, solvent, cosolvent α-Oleoyl-ω-(oleoyloxy) poly(oxyethylene) derived from α-hydro-ω-hydroxypoly(oxyethylene) (molecular weight 600 amu)Component of defoamers Oxo-decyl acetate (CAS reg. No. 108419-33-6)Solvent Oxo-heptyl acetate (CAS Reg. No. 90438-79-2)Solvent Oxo-hexyl acetate (CAS Reg. No. 88230-35-7)Solvent Oxo-nonyl acetate (CAS Reg. No. 108419-34-7)Solvent Oxo-octyl acetate (CAS Reg. No. 108419-32-5)Solvent Oxo-tridecyl acetate (CAS Reg. No. 108419-35-8)Solvent PhenolSolvent, cosolvent Phenol, 2-(2H-benzotriazol-2-yl)-6-dodecyl-4-methyl-, (CAS Reg. No. 23328-53-2)Not more than 10% by weight of pesticide formulationsUV stabilizer. Phenolsulfonic acid—formaldehyde—urea condensate and its sodium saltApplied to growing plants onlyDispersant surfactant (Phthalocyaninato (2)) copper; (C.I. pigment blue No. 15)When used as a colorant in low-density plastic filmsColoring agent, pigment Pigment red 48For seed treatment use onlyDye α-PineneNot more than 2% of formulation by weightStabilizer Poly(oxy-1,2-ethanediyl), α-isotridecyl-ω-methoxy (CAS Reg. No. 345642-79-7)At a maximum of 10% in formulationSurfactant Poly(oxy-1,2-ethanediyl), α-(3-carboxy-1-oxosulfopropyl)-ω-hydroxy-, (C10-C12)-alkyl ethers, disodium salts, polyoxylene content averages 4-5 moles (CAS Reg. No. 68815-56-5)Not to exceed 0.125% for seed treatment use onlySurfactant. Poly(oxy-1,2-ethanediyl), α-(3-carboxy-1-oxosulfopropyl)-ω-hydroxy-, (C10-C16)-alkyl ethers, disodium salts, polyoxyethylene content averages 5 moles (CAS Reg. No. 68954-91-6)Not to exceed 0.125% for seed treatment use onlySurfactant Poly(oxy-1,2-ethanediyl), α, α′-{[[4-[(3-sulfophenyl)azo]phenyl]imino]di-2,1-ethanediyl}bis[ω-hydroxy-, monosodium saltNot to exceed 20% by weight of pesticide formulationColorant. Poly(oxyethylene) adducts of mixed phytosterols (such sterols to consist of campesterol, stigmasterol and sitosterol with minor amounts of associated plant sterols) derived from edible vegetable oils; polyoxyethylene content averaging 5-26 molesSurfactant, related adjuvants Polyoxyethylene polyoxypropylene mono(di-sec-butylphenyl) ether (CAS Reg. No. 69029-39-6)Limited to herbicide formulations only, and to no more than 30% by weight in herbicide formulations intended for application to turfSurfactants, related adjuvants of surfactants Poly(oxyethylene) (5) sorbitan monooleateSurfactants, related adjuvants of surfactants Polysorbate 60, conforming to 21 CFR 172.836Surfactant Potassium acetate (CAS Reg. No. 127-08-2)Nutrient Potassium dihydrogen phosphateBuffering agent 2-Propanamine, compound with α-phosphono-ω-butoxypoly (oxy-1,2-ethanediyl) (2:1) (CAS Reg. No. 431040-31-2)Not more than 15% in the formulated productSurfactant 2-Propanamine, compounds with polyethylene glycol dihydrogen phosphate C8-10- alkyl ether (2:1) (CAS Reg. No. 431062-72-5)Not more than 15% in the formulated productSurfactant 1-Propanaminium, 3-amino-N-(carboxymethyl)-N,N-dimethyl-, N-coco acyl derivatives, hydroxides, inner salts (CAS Reg. No. 61789-40-0)10% w/w in pesticide formulationSurfactant. 1,2-Propanediol, 3-[3-[1, 3, 3, 3-tetramethyl-1-[(trimethylsilyl)oxy]-1-disiloxyanyl] propoxy]- (CAS Reg. No. 70280-68-1)Not to exceed 5% by weight of pesticide formulationAntifoaming agent Propylene glycol monomethyl etherSolvent Pyridoxine (CAS Reg. No. 65-23-6)Maximum of 0.5% of formulationSynergist 2-Pyrrolidinone, 1-butyl- (CAS Reg. No. 3470-98-2)Not to exceed 30% by weight of pesticide formulationSolvent/cosolvent Rosin, dark wood (as defined in 21 CFR 178.3870(a)(1)(v))Surfactants, related adjuvants of surfactants Rosin, gum Do. Rosin, tall oil Do. Cell Walls of Saccharomyces cerevisiaeCarrier. Scandium chloride10 ppm in formulationTagging agent Sodium bisulfate (CAS Reg. No. 7681-38-1)Acidifying/buffering agent Sodium 1,4-dicyclohexyl sulfosuccinateSurfactants, related adjuvants of surfactants Sodium 1,4-dihexyl sulfosuccinate (CAS Reg. No. 3006-15-3)Surfactants, related adjuvants of surfactants Sodium dihydrogen phosphate (CAS Reg. No. 7558-80-7) conforming to 21 CFR 182.6778Buffering agent Sodium 1,4-diisobutyl sulfosuccinate (CAS Reg. No. 127-39-9)Surfactants, related adjuvants of surfactants Sodium 1,4-dipentyl sulfosuccinate (CAS Reg. No. 922-80-5)Surfactants, related adjuvants of surfactants Sodium metaborateSequestrant Sodium molybdatePlant nutrient Sodium nitrateSolid diluent Sodium nitriteNot more than 3% of pesticide formulationStabilizer, inhibitor. Sodium o-phenylphenateNot more than 0.1% of pesticide formulationPreservative for formulation Sodium salt of the insoluble fraction of rosinSurfactants, related adjuvants of surfactants Sodium salts of N-alkyl (C8-C18)-beta-iminodipropionic acid where the C8-C18 is linear and may be saturated and/or unsaturated (CAS Reg. Nos. 3655-00-3, 61791-56-8, 14960-06-6, 26256-79-1, 90170-43-7, 91696-17-2, 97862-48-1)Concentration in formulated end-use products not to exceed 30% by weight in pesticide formulationsSurfactants, related adjuvants of surfactants Sodium tetraborateNot more than 2% of pesticide formulationBuffering agent; corrosion inhibitor Starch, 1-octenylbutanedioate, aluminum salt (CAS Reg. No. 9087-61-0)For seed treatment use onlyFlow aid, flow enhancer, anti-caking agent Sulfonic acids, C13-17-sec-alkane, sodium salts (CAS Reg. No. 85711-69-9)Not to exceed 40% by weight in non-residential use pesticide formulation onlySurfactant Sulfonic acids, C14-17-sec-alkane, sodium salts (CAS Reg. No. 97489-15-1)Not to exceed 40% by weight in non-residential pesticide formulation onlySurfactant Tallowamine, ethoxylated, mixture of dihydrogen phosphate and monohydrogen phosphate esters and the corresponding ammonium, calcium, potassium, and sodium salts of the phosphate esters, where the poly(oxyethylene) content averages 2-20 moles (CAS Reg. No. 68308-48-5)Not to exceed 20% of pesticide formulationSurfactants, related adjuvants of surfactants TanninDispersing agent α-terpineol (CAS Reg. No. 98-55-5)Not to exceed 5% in pesticide formulationsSolvent Tertiary butylhydroquinoneAntioxidant 1-Tetradecanamine, N,N-dimethyl-, N-oxide (CAS Reg. No. 3332-27-2)Component in water-soluble film Tetraethylene glycol (CAS Reg. No. 112-60-7)Solvent N,N,N′,N″-Tetrakis-(2-hydroxypropyl) ethylenediamine (CAS Reg. No. 102-60-3)Concentration in formulated end-use products not to exceed 20% by weight in pesticide formulationsStabilizer for formulations 2,4,7,9-Tetramethyl-5-decyne 4,7-diolIn pesticide formulations, for application to soil prior to planting or to plants before edible parts formSurfactants, related adjuvants of surfactants Tetrapotassium pyrophosphate (CAS Reg. No. 7320-345)Not to exceed 10% of formulationSequestrant, anticaking agent, conditioning agent Thiamine Mononitrate (CAS Reg. No. 532-43-4)0.1% by weight in pesticide formulationsEnzyme cofactor Tin oxide (CAS Reg. No. 18282-10-5)Not to exceed 40% by weight for use in seed treatment pesticide formulations onlyColorant Titanium dioxide (CAS Reg. No. 13463-67-7)Pigment, colorant, carrier Toluenesulfonic acid and its ammonium, calcium, magnesium, potassium, sodium, and zinc saltsSolvent, cosolvent TriethanolamineStabilizer, inhibitor for formulations used before crop emerges from soil Triethanolamine (CAS Reg. No. 102-71-6)Stabilizer, inhibitor Triethylene glycolDeactivator Triethyl phosphateStabilizer for formulations used before crop emerges from soil Trimethylolpropane (CAS Reg. No. 77-99-6)Not to exceed 15% by weight of the filmComponent in water-soluble film α-[2,4,6-Tris[1-(phenyl)ethyl]phenyl]-ω-hydroxy poly(oxyethylene), the poly(oxyethylene) content averages 4-150 moles)Not more than 15% of the formulationSurfactant. α-[2,4,6-Tris[1-(phenyl)ethyl]phenyl]-ω-hydroxy poly(oxyethylene); mixture of monohydrogen and dihydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, potassium, sodium, and zinc salts, the poly(oxyethylene) content averages 4-150 moles)Not more than 15% of the formulation Do. α-[2,4,6-Tris[1-(phenyl)ethyl]phenyl]-ω-hydroxy poly(oxyethylene) sulfate, and the corresponding ammonium, calcium, magnesium, potassium, sodium, and zinc salts, the poly(oxyethylene) content averages 4-150 molesNot more than 15% of the pesticide formulation Do. Tryptophan (CAS Reg. No. 73-22-3)Maximum of 0.5% of formulationSynergist Valeric acid, normalNot more than 2% in pesticide formulationsStenching agent or odorant XyleneSolvent, cosolvent Xylenesulfonic acid its ammonium calcium, magnesium, potassium, sodium, and zinc saltsSurfactants, related adjuvants of surfactants Yucca extract from Yucca schidigeraWetting agent Ytterbium chloride10 ppm in formulationTagging agent Yttrium chloride10 ppm in formulationTagging agent Zinc orthophosphatePlant nutrient and safener Zinc stearate, conforming to 21 CFR 182.5994 and 582.5994Flow control agent
[69 FR 23124, Apr. 28, 2004] Editorial Note:For Federal Register citations affecting § 180.920, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and at www.govinfo.gov.

§ 180.930 - Inert ingredients applied to animals; exemptions from the requirement of a tolerance.

The following materials are exempted from the requirement of a tolerance when used in accordance with good agricultural practice as inert (or occasionally active) ingredients in pesticide formulations applied to animals:

Table 1 to 180.930

Inert ingredients Limits Uses Acetic acid (CAS Reg. No. 64-19-7)Not more than 0.5% of pesticide formulationCatalyst Acetic anhydrideSolvent, cosolvent, stabilizer Acetone (Cas Reg. No. 67-64-1)Solvent or cosolvent Alcohols, C2-33, manuf. of, by-products from, overheads (CAS Reg. No. 876065-86-0)Solvent Alkanoic and alkenoic acids, mono- and diesters of α-hydro-ω-hydroxypoly(oxyethylene) with molecular weight (in amu) range of 200 to 6,000Emulsifiers Alkyl (C8-C24) benzenesulfonic acid and its ammonium, calcium, magnesium, potassium, sodium, and zinc saltsSurfactants, emulsifier, related adjuvants of surfactants Alkyl (C12-C16) dimethyl ammonio acetate (CAS Reg. Nos. 683-10-3, 2601-33-4 and 693-33-420% by weight in pesticide formulationSurfactant α-alkyl (minimum C6 linear, branched, saturated and/or unsaturated)-ω-hydroxypolyoxyethylene polymer with or without polyoxypropylene, mixture of di- and monohydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts of the phosphate esters; minimum oxyethylene content is 2 moles; minimum oxypropylene content is 0 moles (CAS Reg. Nos.: 9004-80-2, 9046-01-9, 26982-05-8, 31800-89-2, 37280-82-3, 37281-86-0, 39341-09-8, 39341-65-6, 39464-66-9, 39464-69-2, 42612-52-2, 50643-20-4, 50668-50-3, 51325-10-1, 51884-64-1, 52019-36-0, 57486-09-6, 58206-38-5, 58318-92-6, 58857-49-1, 59112-71-9, 60267-55-2, 61837-79-4, 62362-49-6, 62482-61-5, 63747-86-4, 63887-54-7, 63887-55-8, 66020-37-9, 66272-25-1, 66281-20-7, 67711-84-6, 67786-06-5, 67989-06-4, 68070-99-5, 68071-17-0, 68071-35-2, 68071-37-4, 68130-44-9, 68130-45-0, 68130-46-1, 68130-47-2, 68186-29-8, 68186-34-5, 68186-36-7, 68186-37-8, 68238-84-6, 68311-02-4, 68311-04-6, 68332-75-2, 68389-72-0, 68400-75-9, 68413-78-5, 68425-73-0, 68425-75-2, 68439-39-4, 68458-48-0, 68511-15-9, 68511-36-4, 68511-37-5, 68551-05-3, 68585-15-9, 68585-16-0, 68585-17-1, 68585-36-4, 68585-39-7, 68603-24-7, 68607-14-7, 68610-64-0, 68610-65-1, 68649-29-6, 68649-30-9, 68650-84-0, 68815-11-2, 68855-46-9, 68856-03-1, 68890-90-4, 68890-91-5, 68891-12-3, 68891-13-4, 68891-26-9, 68908-64-5, 68909-65-9, 68909-67-1, 68909-69-3, 68921-24-4, 68921-60-8, 68954-87-0, 68954-88-1, 68954-92-7, 68987-35-9, 69029-43-2, 69980-69-4, 70247-99-3, 70248-14-5, 70844-96-1, 70903-63-8, 71965-23-6, 71965-24-7, 72480-27-4, 72623-67-7, 72623-68-8, 72828-56-9, 72828-57-0, 73018-34-5, 73038-25-2, 73050-08-5, 73050-09-6, 73361-29-2, 73378-71-9, 73378-72-0, 73559-42-9, 73559-43-0, 73559-44-1, 73559-45-2, 74499-76-6, 76930-25-1, 78041-18-6, 78330-22-0, 78330-24-2, 82465-25-6, 84843-37-8, 91254-26-1, 93925-54-3, 95014-34-9, 96416-89-6, 99924-51-3, 103170-31-6, 103170-32-7, 106233-09-4, 106233-10-7, 108818-88-8, 110392-49-9, 111798-26-6, 111905-50-1, 116671-23-9, 117584-36-8, 119415-05-3, 120913-45-3, 121158-61-0, 121158-63-2, 123339-53-7, 125139-13-1, 125301-86-2, 125301-87-3, 126646-03-5, 129208-04-4, 129870-77-5, 129870-80-0, 130354-37-9, 136504-88-6, 143372-50-3, 143372-51-4, 144336-75-4, 146815-57-8, 151688-56-1, 154518-39-5, 154518-40-8, 155240-11-2, 157627-92-4, 159704-69-5, 160498-49-7, 160611-24-5, 171543-66-1, 172027-16-6, 172274-69-0, 176707-42-9, 181963-82-6, 188741-55-1, 191940-53-1, 210493-60-0, 210993-53-6, 2275654-37-8, 246159-55-7, 251298-11-0, 261627-68-3, 290348-69-5, 290348-70-8, 317833-96-8, 340681-28-9 , 422563-19-7, 422563-26-6, 522613-09-8, 717140-06-2, 717140-09-5, 717827-29-7, 762245-80-7, 762245-81-8, 866538-89-8, 866538-90-1, 873662-29-4, 913068-96-9, 936100-29-7, 936100-30-0, 1072943-56-6, 1087209-87-7, 1174313-54-2, 1187742-89-7, 1187743-35-6, 1205632-03-6, 1233235-49-8, 1451002-50-8, 1456802-88-2, 1456802-89-3, 1456803-12-5)Not to exceed 30% by weight in pesticide formulationsSurfactants, related adjuvants of surfactants. α-alkyl(C6- C15)-ω-hydroxypoly(oxyethylene)sulfate, and its ammonium, calcium, magnesium, potassium, sodium, and zinc salts, poly(oxyethylene) content averages 2-4 moles (CAS Reg. Nos.: 3088-31-1, 3694-74-4, 9004-82-4, 9004-84-6, 9021-91-4, 9086-52-6, 13150-00-0, 15826-16-1, 25446-78-0, 26183-44-8, 27140-00-7, 27731-61-9, 27731-61-9, 27731-62-0, 32612-48-9, 34431-25-9, 35015-74-8, 50602-06-7, 52286-18-7, 52286-19-8, 54116-08-4, 55901-67-2, 61702-79-2, 61894-66-4, 62755-21-9, 63428-85-3, 63428-86-4, 63428-87-5, 65086-57-9, 65086-79-5, 65104-74-7, 65122-38-5, 67674-66-2, 67762-19-0, 67762-21-4, 67845-82-3, 67845-83-4, 67923-90-4, 68037-05-8, 68037-06-9, 68171-41-5, 68424-50-0, 68511-39-7, 68585-34-2, 68610-66-2, 68611-29-0, 68611-55-2, 68649-53-6, 68890-88-0, 68891-29-2, 68891-30-5, 68891-38-3, 69011-37-6, 73665-22-2, 75422-21-8, 78330-16-2, 78330-17-3, 78330-25-3, 78330-26-4, 78330-27-5, 78330-28-6, 78330-29-7, 78330-30-0, 96130-61-9, 106597-03-9, 110392-50-2, 119432-41-6, 125301-88-4, 125301-89-5, 125301-92-0, 125736-54-1, 157707-85-2, 160104-51-8, 160901-27-9, 160901-28-0, 160901-29-1, 160901-30-4, 161025-28-1, 161074-79-9, 162063-19-6, 219756-63-5)Not to exceed 30% of formulationSurfactants, related adjuvants of surfactants. α-alkyl (C12-C15)-ω-hydroxypoly (oxypropylene)poly (oxyethylene)copolymers (where the poly(oxypropylene) content is 3-60 moles and the poly(oxyethylene) content is 5-80 moles), the resulting ethoxylated propoxylated (C12-C15) alcohols having a minimum molecular weight (in amu) of 1,500, CAS Reg. No. 68551-13-3Not to exceed 20% of pesticide formulationsSurfactant α-Alkyl-ω-hydroxypoly (oxypropylene) and/or poly (oxyethylene) polymers where the alkyl chain contains a minimum of six carbons (CAS Reg. Nos.: 9002-92-0; 9004-95-9; 9004-98-2; 9005-00-9; 9035-85-2; 9038-29-3; 9038-43-1; 9040-05-5; 9043-30-5; 9087-53-0; 25190-05-0; 24938-91-8; 25231-21-4; 251553-55-6; 26183-52-8; 26468-86-0; 26636-39-5; 26636-40-8; 27252-75-1; 27306-79-2; 31726-34-8; 32128-65-7; 34398-01-1; 34398-05-5; 37251-67-5; 37311-00-5; 37311-01-6; 37311-02-7; 37311-04-9; 39587-22-9; 50861-66-0; 52232-09-4; 52292-17-8; 52609-19-5; 57679-21-7; 59112-62-8; 60636-37-5; 60828-78-6; 61702-78-1; 61723-78-2; 61725-89-1; 61791-13-7; 61791-20-6; 61791-28-4; 61804-34-0; 61827-42-7; 61827-84-7; 62648-50-4; 63303-01-5; 63658-45-7; 63793-60-2; 64366-70-7; 64415-24-3; 64415-25-4; 64425-86-1; 65104-72-5; 65150-81-4; 66455-14-9: 66455-15-0; 67254-71-1; 67763-08-0; 68002-96-0; 68002-97-1; 68131-39-5; 68131-40-8; 68154-96-1; 68154-97-2; 68154-98-3; 68155-01-1; 68213-23-0; 68213-24-1; 68238-81-3; 68238-82-4; 68409-58-5; 68409-59-6; 68439-30-5; 68439-45-2; 68439-46-3; 68439-48-5; 68439-49-6; 68439-50-9; 68439-51-0; 68439-53-2; 68439-54-3; 68458-88-8; 68526-94-3; 68526-95-4; 68551-12-2; 68551-13-3; 68551-14-4; 68603-20-3; 68603-25-8; 68920-66-1; 68920-69-4; 68937-66-6; 68951-67-7; 68954-94-9; 68987-81-5; 68991-48-0; 69011-36-5; 69013-18-9; 69013-19-0; 69227-20-9; 69227-21-0; 69227-22-1; 69364-63-2; 70750-27-5; 70879-83-3; 70955-07-6; 71011-10-4; 71060-57-6; 71243-46-4; 72066-65-0; 72108-90-8; 72484-69-6; 72854-13-8; 72905-87-4; 73018-31-2; 73049-34-0; 74432-13-6; 74499-34-6; 78330-19-5; 78330-20-8; 78330-21-9; 78330-23-1; 79771-03-2; 84133-50-6; 85422-93-1; 97043-91-9; 97953-22-5; 102782-43-4; 103331-86-8; 103657-84-7; 103657-85-8; 103818-93-5; 103819-03-0; 106232-83-1; 111905-54-5; 116810-31-2; 116810-32-3; 116810-33-4; 120313-48-6; 120944-68-5; 121617-09-2; 126646-02-4; 126950-62-7; 127036-24-2; 139626-71-4; 152231-44-2; 154518-36-2; 157627-86-6; 157627-88-8; 157707-41-0; 157707-43-2; 159653-49-3; 160875-66-1; 160901-20-2; 160901-09-7; 160901-19-9; 161025-21-4; 161025-22-5; 161133-70-6; 166736-08-9; 169107-21-5; 172588-43-1; 176022-76-7; 196823-11-7; 287935-46-0; 288260-45-7; 303176-75-2; 954108-36-2; 2222805-23-2; 2409830-33-5)Surfactants, related adjuvants of surfactants α-alkyl (minimum C6 linear, branched, saturated and/or unsaturated)-ω-hydroxypolyoxyethylene polymer with or without polyoxypropylene, mixture of di- and monohydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts of the phosphate esters; minimum oxyethylene content is 2 moles; minimum oxypropylene content is 0 moles, (CAS Reg. Nos.: 9004-80-2, 9046-01-9, 26982-05-8, 31800-89-2, 37280-82-3, 37281-86-0, 39341-09-8, 39341-65-6, 39464-66-9, 39464-69-2, 42612-52-2, 50643-20-4, 50668-50-3, 51325-10-1, 51884-64-1, 52019-36-0, 52019-38-2, 52019-38-2, 57486-09-6, 58206-38-5, 58318-92-6, 58857-49-1, 59112-71-9, 60267-55-2, 61837-79-4, 62362-49-6, 62482-61-5, 63747-86-4, 63887-54-7, 63887-55-8, 66020-37-9, 66272-25-1, 66281-20-7, 67711-84-6, 67786-06-5, 67989-06-4, 68070-99-5, 68071-17-0, 68071-35-2, 68071-37-4, 68130-44-9, 68130-45-0, 68130-46-1, 68130-47-2, 68186-29-8, 68186-34-5, 68186-36-7, 68186-37-8, 68238-84-6, 68311-02-4, 68311-04-6, 68332-75-2, 68389-72-0, 68400-75-9, 68413-78-5, 68425-73-0, 68425-75-2, 68439-39-4, 68458-48-0, 68511-15-9, 68511-36-4, 68511-37-5, 68551-05-3, 68585-15-9, 68585-16-0, 68585-17-1, 68585-36-4, 68585-39-7, 68603-24-7, 68607-14-7, 68610-64-0, 68610-65-1, 68649-29-6, 68649-30-9, 68650-84-0, 68815-11-2, 68855-46-9, 68856-03-1, 68890-90-4, 68890-91-5, 68891-12-3, 68891-13-4, 68891-26-9, 68908-64-5, 68909-65-9, 68909-67-1, 68909-69-3, 68921-24-4, 68921-60-8, 68954-87-0, 68954-88-1, 68954-92-7, 68987-35-9, 69029-43-2, 69980-69-4, 70247-99-3, 70248-14-5, 70844-96-1, 70903-63-8, 71965-23-6, 71965-24-7, 72480-27-4, 72623-67-7, 72623-68-8, 72828-56-9, 72828-57-0, 73018-34-5, 73038-25-2, 73050-08-5, 73050-09-6, 73361-29-2, 73378-71-9, 73378-72-0, 73559-42-9, 73559-43-0, 73559-44-1, 73559-45-2, 74499-76-6, 76930-25-1, 78041-18-6, 78330-22-0, 78330-24-2, 82465-25-6, 84843-37-8, 91254-26-1, 93925-54-3, 95014-34-9, 96416-89-6, 99924-51-3, 103170-31-6, 103170-32-7, 106233-09-4, 106233-10-7, 108818-88-8, 110392-49-9, 111798-26-6, 111905-50-1, 116671-23-9, 117584-36-8, 119415-05-3, 120913-45-3, 121158-61-0, 121158-63-2, 123339-53-7, 125139-13-1, 125301-86-2, 125301-87-3, 126646-03-5, 129208-04-4, 129870-77-5, 129870-80-0, 130354-37-9, 136504-88-6, 143372-50-3, 143372-51-4, 144336-75-4, 146815-57-8, 151688-56-1, 154518-39-5, 154518-40-8, 155240-11-2, 159704-69-5, 160498-49-7, 160611-24-5, 171543-66-1, 172027-16-6, 172274-69-0, 176707-42-9, 181963-82-6, 188741-55-1, 191940-53-1, 210493-60-0, 210993-53-6, 246159-55-7, 251298-11-0, 261627-68-3, 290348-69-5, 290348-70-8, 317833-96-8, 340681-28-9, 422563-19-7, 422563-26-6, 522613-09-8, 717140-06-2, 717140-09-5, 717827-29-7, 762245-80-7, 762245-81-8, 866538-89-8, 866538-90-1, 873662-29-4, 913068-96-9, 936100-29-7, 936100-30-0, 1072943-56-6, 1087209-87-7, 1174313-54-2, 1187742-89-7, 1187743-35-6, 1205632-03-6, 1233235-49-8, 1451002-50-8, 1456802-88-2, 1456802-89-3, 1456803-12-5)Not to exceed 30% of formulationSurfactants, related adjuvants of surfactants. N-alkyl (C8-C18) primary amines and their acetate salts where the alkyl group is linear and may be saturated and/or unsaturated (CAS Reg. Nos. 61790-57-6, 61790-58-7, 61790-59-8, 61790-60-1, 61788-46-3, 61790-33-8, 68155-38-4)Concentration in formulated end-use products not to exceed 10% by weight in herbicide products, 4% by weight in insecticide products, and 4% by weight in fungicide productsSurfactants, related adjuvants of surfactants Alkyl (C8-C18) sulfate and its ammonium, calcium, magnesium, potassium, sodium, and zinc saltsSurfactant N,N-Bis-α-ethyl-ω-hydroxypoly(oxy-1,2-ethanediyl) C8-C18 saturated and unsaturated alkylamines; the poly(oxy-1,2-ethanediyl) content is 2-60 moles (CAS Reg. Nos. 10213-78-2, 25307-17-9, 26635-92-7, 26635-93-8, 288259-52-9, 58253-49-9, 61790-82-7, 61791-14-8, 61791-24-0, 61791-26-2, 61791-31-9, 61791-44-4, 68155-33-9, 68155-39-5, 68155-40-8,70955-14-5, 73246-96-5, 1266162-49-5)Not to exceed 25% in herbicide formulations and 10% in insecticide and fungicide formulationsSurfactants, related adjuvants of surfactants N,N-Bis-α-ethyl-ω-hydroxypoly(oxy-1,2-ethanediyl/oxy(methyl-1,2-ethanediyl) C8-C18 saturated and unsaturated alkylamines; the poly(oxy-1,2-ethanediyl/oxy(methyl-1,2-ethanediyl) content is 2-60 moles (CAS Reg. Nos. 68213-26-3, 68153-97-9, 75601-76-2)Not to exceed 25% in herbicide formulations and 10% in insecticide and fungicide formulationsSurfactants, related adjuvants of surfactants Ascorbyl palmitatePreservative Attapulgite-type claySolid diluent, carrier Barium sulfate (CAS Reg. No. 7727-43-7)Carrier, density control agent Benzoic acidPreservative for formulations 2-Bromo-2-nitro-1,3-propanediol (CAS Reg. No. 52-51-7)0.04% or less by weight of the total pesticide formulationIn-can preservative ButanePropellant n-Butanol (CAS Reg. No. 71-36-3)Solvent for blended emulsifiers Butoxypolypropylene glycol (CAS Reg. No. 9003-13-8) n-Butyl benzoate (CAS RN 136-60-7)Solvent n-Butyl-3-hydroxybutyrate (CAS Reg. No. 53605-94-0)Solvent Butylated hydroxyanisoleAntioxidant Butylated hydroxytoluene Do. Calcium carbonateSolid diluent, carrier Calcium chlorideStabilizer Calcium silicate, hydrated calcium silicateAnticaking agent, solid diluent, carrier C9 rich aromatic hydrocarbons (CAS Reg. No. 64742-95-6)Solvent C10-11 rich aromatic hydrocarbons (CAS Reg. No. 64742-94-5)Solvent C11-12 rich aromatic hydrocarbons (CAS Reg. No. 64742-94-5)Solvent Calcium stearate (CAS Reg. No. 1592-23-0)Stabilizer, component of plastic animal tag Calcium sulfateSolid diluent, carrier Carbon black (CAS Reg. No. 1333-86-4)Colorant/pigment in animal tag Carbon Dioxide (CAS Reg. No. 124-38-9)NonePropellant Carrageenan, conforming to 21 CFR 172.620Minimum molecular weight (in amu): 100,000Thickener Cumene sulfonic acid and its ammonium, calcium, magnesium, potassium, sodium and zinc salts (CAS Reg. Nos. 15763-76-5, 16066-35-6, 164524-02-1, 28085-69-0, 28348-53-0, 28631-63-2, 32073-22-6, 37475-88-0, 37953-05-2, and 90959-88-9)Surfactant, related adjuvant of surfactant CyclohexanoneSolvent, cosolvent D&C Green No. 6Dye, coloring agent D&C Red No. 17 Do. D&C Violet No. 2 Do. 5-decyne-4,7-diol, 2,4,7,9-tetramethyl- (CAS Reg. No. 126-86-3)surfactant, related adjuvant of surfactants and carriers. Dialkyl (C8-C18) dimethylammonium chlorideNot more than 0.2% in silica hydrated silicaFlocculating agent in the manufacture of silica hydrated silica for use as a solid diluent, carrier Diatomite (diatomaceous earth)Solid diluent, carrier Diethanolamine salts of alkyl (C8-C24) benzenesulfonic acid (CAS Reg. Nos. 26545-53-9, 67815-95-6, 67889-94-5, 67889-95-6, 68259-34-7, 68478-47-7, 68567-68-0, 68815-34-9, 68815-37-2, 68891-02-1, 68953-97-9, 84989-15-1, 85338-09-6, 90194-39-1, 90194-40-4, 90218-08-9)Not to exceed 7% of pesticide formulationSurfactants, related adjuvants of surfactants. Diethylaminoethanol, ethoxylated, propoxylated, reaction products with fatty acid dimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173188-75-4)Surfactant Diethylaminoethanol, ethoxylated, propoxylated, reaction products with fatty acid trimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173188-83-4)Surfactant Diethylaminoethanol, ethoxylated, reaction products with acid trimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173188-81-2)Surfactant Diethylaminoethanol, ethoxylated, reaction product with fatty acid dimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173188-72-1)Surfactant DiethylphthalateSolvent, cosolvent 1,1-Difluoroethane (CAS Reg. No. 75-37-6)In pesticide formulations used for insect control in food- and feed-handling establishments and animals; in bird repellent pesticide formulationsAerosol propellant Dimethyl ether (CAS Reg. No. 115-10-6)Propellant Dimethylaminoethanol, ethoxylated, propoxylated, reaction products with fatty acid dimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173188-42-5)Surfactant Dimethylaminoethanol, ethoxylated, propoxylated reaction products with fatty acid trimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173188-67-4)Surfactant Dimethylaminoethanol, ethoxylated, reaction products with fatty acid trimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173188-38-9)Surfactant Dimethylaminoethanol, ethoxylated, reaction products with fatty acid trimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173188-49-2)Surfactant Dimethylaminopropylamine, isopropylamine, ethanolamine, and triethanolamine salts of alkyl (C8-C24) benzenesulfonic acid (CAS Reg. Nos. 3088-30-0, 12068-12-1, 26264-05-1, 26836-07-7, 27323-41-7, 55470-69-4, 58089-99-9, 61886-59-7, 61931-76-8, 67924-05-4, 68110-32-7, 68259-35-8, 68411-31-4, 68442-72-8, 68567-69-1, 68584-24-7, 68584-25-8, 68648-81-7, 68648-96-4, 68649-00-3, 68815-30-5, 68815-35-0, 68910-32-7
68953-93-5, 68953-98-0, 70528-84-6, 72391-21-0, 84961-74-0, 85480-55-3, 85480-56-4, 85995-82-0, 90194-42-6, 90194-53-9, 90194-54-0, 90194-55-1, 90218-09-0, 90218-11-4, 90218-35-2, 96687-54-6, 99924-49-9, 121617-08-1, 157966-96-6, 193562-36-6, 319926-68-6, 877677-48-0, 1093628-27-3).
Surfactants, related adjuvants of surfactants. N,N-Dimethylnonanamide (CAS Reg. No. 6225-08-7)Not to exceed 20% by weight of pesticide formulationSolvent, co-solvent, and adjuvant. 3,6-Dimethyl-4-octyne-3,6-diolNot more than 2.5% of pesticide formulationSurfactants, related adjuvants of surfactants Dimethylpolysiloxane (CAS Reg. No. 9016-00-6)Defoaming agent Di-n-butyl carbonate (CAS Reg. No. 542-52-9)Solvent Dipropylene glycol monomethyl etherSurfactants, related adjuvants of surfactants Distillates (petroleum), solvent-dewaxed heavy paraffinic (CAS Reg. No. 64742-65-0)Carrier 6-dodecyne-5,8-diol, 2,5,8,11-tetramethyl- (CAS Reg. No. 68227-33-8)surfactant, related adjuvant of surfactants and carriers. Epoxidized soybean oil (CAS Reg. No. 8013-07-8)Stabilizer, plasticizer, component animal tag Ethanesulfonic acid, 2-hydroxy- (CAS Reg. No. 107-36-8)Chelator, sequestrant, or conditioning agent. Ethanesulfonic acid, 2-hydroxy-, ammonium salts (CAS Reg. No. 57267-78-4) Do. Ethanesulfonic acid, 2-hydroxy-, calcium salts (CAS Reg. No. 10550-47-7) Do. Ethanesulfonic acid, 2-hydroxy-, magnesium salts (CAS Reg. No. 17345-56-1) Do. Ethanesulfonic acid, 2-hydroxy-, potassium salts (CAS Reg. No. 1561-99-5) Do. Ethanesulfonic acid, 2-hydroxy-, sodium salts (CAS Reg. No. 1562-00-1) Do. Ethanesulfonic acid, 2-hydroxy-, zinc salts (CAS Reg. No. 129756-32-7) Do. Ethyl alcoholSolvent, cosolvent Ethyl maltol (CAS Reg. No.4940-11-8)Not more than 0.2 % of the pesticide formulationOdor masking agent Ethylene oxide adducts of 2,4,7,9-tetramethyl-5-decynediol, the ethylene oxide content averages 3.5, 10 or 30 moles (CAS Reg. No. 9014-85-1)Surfactants, related adjuvants of surfactants 2-Ethyl-1-hexanol (CAS Reg. No. 104-76-7)Not more than 10% of pesticideSolvent, adjuvant of surfactants FD&C Blue No. 1Dye, coloring agent FD&C Yellow No. 6 Aluminum Lake (CAS Reg. No. 15790-07-5)Not more than 2% by weight of pesticide formulationPigment in animal tag and similar slow-release devices Formic Acid (CAS Reg. No. 64-18-6)25%pH adjuster. D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-methyl-(CAS Reg. No. 5306-85-4); D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-ethyl- (CAS Reg. No. 30915-81-2); D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-propyl) (CAS Reg. No.107644-13-3); D-glucitol, 1,4:3,6-dianhydro-2,5-bis-O-(1-methylethyl)-,(iso-propyl diether) (CAS Reg. No. 103594-41-8); D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-butyl- (CAS Reg. No. 103594-42-9); D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(1-methylpropyl)-, (CAS Reg. No. not assigned); and D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(2-methylpropyl)-, (CAS Reg. No. not assigned)solvent, co-solvent, viscosity modifier, and adjuvant D-glucopyranose, oligomeric, C10-16-alkyl glycosides (CAS Reg. No. 110615-47-9)Surfactant Glycerol monooleateSurfactants, related adjuvants of surfactants Glyceryl monostearateEmulsifier Glyceryl tris-12-hydroxystearateFlow control agent GraphiteSolid diluent, carrier n-Hexyl alcohol (CAS Reg. No. 111-27-3)Solvent, cosolvent Hydroxyethylmorpholine, ethoxylated, propoxylated, reaction products with fatty acid dimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173189-06-4)Surfactant Hydroxyethylmorpholine, ethoxylated, propoxylated, reaction products with fatty acid trimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173188-67-4)Surfactant Hydroxyethylmorpholine, ethoxylated, reaction products with fatty acid dimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173189-00-8)Surfactant Hydroxyethylmorpholine, ethoxylated, reaction products with fatty acid trimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173189-09-7)Surfactant Hydroxyethylpiperidine, ethoxylated, propoxylated, reaction products with fatty acid dimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173189-22-4)Surfactant Hydroxyethylpiperidine, ethoxylated, propoxylated, reaction products with fatty acid trimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173189-28-0)Surfactant Hydroxyethylpiperidine, ethoxylated, reaction products with fatty acid dimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173189-20-2)Surfactant Hydroxyethylpiperidine, ethoxylated, reaction products with fatty acid trimers, minimum number average molecular weight (in amu), 1,200 (CAS Reg. No. 1173189-25-7)Surfactant 2-(2′-Hydroxy-5′-methylphenyl)benzotriazole (CAS Reg. No. 2440-22-4)Not more than 0.5% by weight of pesticide formulationUltraviolet light absorber/stabilizer in animal tag and similar slow-release devices Iron oxide (CAS Reg. No. 1309-37-1)Colorant in pesticide formulations for animal tags Iron oxide (Fe3O4) (CAS Reg. No. 1317-61-9)Not to exceed 0.2% of pesticide formulationsColorant Isobutane (CAS Reg. No. 75-28-5)NonePropellant Isopropyl-3-hydroxybutyrate (CAS Reg. No. 54074-94-1)Solvent Isopropyl myristate, CAS Reg. No. 110-27-0Solvent Kaolinite-type claySolid diluent, carrier Kerosene, U.S.P. reagentSolvent, cosolvent Lactic acidSolvent Lactic acid, 2-ethylhexyl ester (CAS Reg. No. 6283-86-9)Solvent Lactic acid, 2-ethylhexyl ester, (2S)- (CAS Reg. No. 186817-80-1)Solvent Lactic acid, n-propyl ester, (S); (CAS Reg. No. 53651-69-7)Solvent Lignin (CAS Reg. No. 9005-53-2)Surfactant, related adjuvants of surfactants Lignin, alkali (CAS Reg. No. 8068-05-1) Do. Lignin, alkali, oxidized, sodium salt (CAS Reg. No. 68201-23-0) Do. Lignin alkali reaction products with disodium sulfite and formaldehyde (CAS Reg. No. 105859-97-0) Do. Lignin alkali reaction products with formaldehyde and sodium bisulfite (CAS Reg. No. 68512-35-6) Do. Lignosulfonic acid (CAS Reg. No. 8062-15-5) Do. Lignosulfonic acid, ammonium calcium salt (CAS Reg. No. 12710-04-2) Do. Lignosulfonic acid, ammonium magnesium salt (CAS Reg. No. 123175-37-1) Do. Lignosulfonic acid, ammonium salt (CAS Reg. No. 8061-53-8) Do. Lignosulfonic acid, ammonium sodium salt (CAS Reg. No. 166798-73-8) Do. Lignosulfonic acid, calcium magnesium salt (CAS Reg. No. 55598-86-2) Do. Lignosulfonic acid, calcium salt (CAS Reg. No. 8061-52-7) Do. Lignosulfonic acid, calcium sodium salt (CAS Reg. No. 37325-33-0) Do. Lignosulfonic acid, ethoxylated, sodium salt (CAS Reg. No. 68611-14-3) Do. Lignosulfonic acid, magnesium salt (CAS Reg. No. 8061-54-9) Do. Lignosulfonic acid, potassium salt (CAS Reg. No. 37314-65-1) Do. Lignosulfonic acid, sodium salt (CAS Reg. No. 8061-51-6) Do. Lignosulfonic acid, sodium salt, oxidized (CAS Reg. No. 68855-41-4) Do. Lignosulfonic acid, sodium salt, polymer with formaldehyde and phenol (CAS Reg. No. 37207-89-9) Do. Lignosulfonic acid, sodium salt, sulfomethylated (CAS Reg. No. 68512-34-5) Do. Lignosulfonic acid, zinc salt (CAS Reg. No. 57866-49-6) Do. d-Limonene (CAS Reg. No. 5989-27-5)Solvent, fragrance Magnesium carbonateSolid diluent, carrier Magnesium silicate, hydrated magnesium silicate Do. Methane sulfonic acid (CAS Reg. No. 75-75-2)Not to exceed 3.0% by weight in pesticide formulationAcidifying agent Methyl alcoholSolvent, cosolvent Methyl n-amyl ketone (CAS Reg. No. 110-43-0)Solvent, cosolvent Methyl esters of higher fatty acids conforming to 21 CFR 573.640Antidusting agent Methyl-p-hydroxybenzoate (Methyl paraben)Meets specifications of Food Chemicals Codex; not to exceed 0.1% in formulationsPreservative Methyl isobutyl ketoneSolvent, cosolvent 2-methyl-2,4-pentanediol (CAS Reg. No.-107-41-5)Without limitationGrowing crops and food animals 2-methyl-1,3-propanediol (CAS Reg. No. 2163-42-0)Solvent, surfactant Mineral oil, U.S.P., or conforming to 21 CFR 172.878 or 178.3620(a), (b)Solvent, diluent Montmorillonite-type claySolid diluent, carrier Nonyl, decyl, and undecyl glycoside mixture with a mixture of nonyl, decyl, and undecyl oligosaccharides and related reaction products (primarily decanol and undecanol) produced as an aqueous-based liquid (50 to 65% solids) from the reaction of primary alcohols (containing 15 to 20% secondary alcohol isomers) in a ratio of 20% C9, 40% C10, and 40% C11 with carbohydrates (average glucose to alkyl chain ratio 1.3 to 1.8)Surfactant α-(p-Nonylphenol)-ω-hydroxypoly(oxyethylene) mixture of dihydrogen phosphate and monohydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, potassium, sodium, and zinc salts of the phosphate esters; the nonyl group is a propylene trimer isomer and the poly(oxyethylene) content averages 4-14 or 30 moles (CAS Reg. Nos. 51811-79-1, 59139-23-0, 67922-57-0, 68412-53-3, 68553-97-9, 68954-84-7, 99821-14-4, 152143-22-1, 51609-41-7, 37340-60-6, 106151-63-7, 68584-47-4, 52503-15-8, 68458-49-1)Not to exceed 7% of pesticide formulationSurfactants, related adjuvants of surfactants α-(p-Nonylphenol)-ω-hydroxypoly(oxyethylene) sulfate, ammonium, calcium, magnesium, potassium, sodium, and zinc salts the nonyl group is propylene trimer isomer and the poly(oxyethylene) content averages 4 moles (CAS Reg. Nos. 9014-90-8, 9051-57-4, 9081-17-8, 68649-55-8, 68891-33-8Not to exceed 7% of pesticide formulationSurfactants, related adjuvants of surfactants α-(p-Nonylphenyl)-ω-hydroxypoly(oxyethylene) produced by the condensation of 1 mole of nonylphenol (nonyl group is a propylene trimer isomer) with an average of 4-15 or 30-90 moles of ethylene oxide; if a blend of products is used, the average number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be in the range of 4-15 or 30-90 molesSurfactants, emulsifier, related adjuvants of surfactants. Octadecyl 3,5-di-tert-butyl-4-hydroxyhydro cinnamate (CAS Reg. No. 2082-79-3)Not more than 0.5% by weight of pesticide formulationThermal stabilizer/antioxidant in animal tag and similar slow-release devices 1-Octanal (CAS Reg. No. 124-13-0)Not more than 0.2% of the pesticide formulationOdor masking agent Octyl and decyl glucosides mixture with a mixture of octyl and decyl oligosaccharides and related reaction products (primarily n-decanol) produced as an aqueous-based liquid (68-72% solids) from the reaction of straight chain alcohols (C8(45%), C10) with anhydrous glucoseThermal stabilizer/antioxidant in animal tag and similar slow-release devices Octyl epoxytallate (CAS Reg. No. 61788-72-5)Plasticizer, component animal tag Oleic acid, conforming to 21 CFR 172.862 (CAS Reg. No. 112-80-1)Defoaming agent α-Oleoyl-ω-hydroxypoly(oxyethylene), average molecular weight (in amu) of 600Emulsifier α-Oleoyl-ω-(oleyloxy)poly(oxyethylene) derived from α-hydro-ω-hydroxypoly(oxyethylene), molecular weight (in amu) 600Emulsifier, defoaming agent Oxirane, 2-methyl-, polymer with oxirane, mono-2-propen-1-yl ether (CAS Reg. No. 9041-33-2) Paraffin waxes and hydrocarbon waxes; carboxypolymethylene resin; and paraffin waxes and hydrocarbon, oxidized, lithium salts8002-74-2; 68153-22-0; 68649-48-9 Pentaerythritol tetrakis (3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS Reg. No. 6683-19-8)Not to exceed 3% by weight of the pesticide formulationAntioxidant, stabilizer. Petroleum hydrocarbons, light, odorless, conforming to 21 CFR 172.884 or 178.3650Solvent, diluent Petroleum hydrocarbons, synthetic isoparaffinic, conforming to 21 CFR 172.882 or 178.3530 Do. PhenolSolvent, cosolvent α-PineneNot more than 2% of formulation by weightStabilizer Polyethylene (CAS Reg. No. 9002-88-4) conforming to 21 CFR 172.615Component of plastic slow release tag Polyethylene glycol [α-hydro-ω-hydroxypoly(oxyethylene)]; mean molecular weight (in amu) 194 to 9,500 conforms to 21 CFR 178.3750Surfactants, related adjuvants of surfactants Poly(oxy-1,2-ethanediyl), α-acetyl-v -(2-propen-1-yloxy)- (CAS Reg. No. 27252-87-5) Poly(oxy-1,2-ethanediyl), α-methyl-v -(2-propen-1-yloxy)- (CAS Reg. No. 27252-80-8) Poly(oxy-1,2-ethanediyl), α-(3-(1,3,3,3-tetramethyl-1-((trimethylsilyl) oxy) disiloxanyl) propyl)-ω-hydroxy- (CAS Reg. No. 67674-67-3)Surfactant Potassium benzoate (Cas No. 582-25-2)NonePreservative Potassium hydroxideMeeting Food Chemicals, Codex specificationsNeutralizer Propanamide, 2-hydroxy-N, N-dimethyl- (CAS Reg. No. 35123-06-9)Not to exceed 50% by weight in pesticide formulationSolvent/co-solvent PropanePropellant 1,2,3-Propanetriol, homopolymer diisooctadecanoate (CAS Reg. No. 63705-03-3)Emulsifier n-PropanolSolvent, for blended emulsifiers 2-Propenoic acid, 2-methyl-, polymer with ethyl 2-propenoate and methyl 2-methyl-2-propenoate, ammonium salt (CAS Registration No. 55989-05-4), minimum number average molecular weight (in amu), 18,900.Encapsulating agent,dispensers, resins, fibers and beads Propylene glycolSolvent, cosolvent Propylene glycol monomethyl etherDeactivator, emmolient Propyl gallateAntioxidant Propyl p-hydroxybenzoate (Propyl paraben)Meets specifications of Food Chemicals Codex; not to exceed 0.1% in formulationsPreservative PyrophyliteSolid diluent, carrier Silica, hydrated silicaAnticaking agent, solid diluent, carrier Silica aerogel (finely powdered microcellular silica foam having a minimum silica content of 89.5%)Component of antifoaming agent SoapstoneSolid diluent Sodium alkyl naphthalenesulfonates (CAS Reg. Nos. 68909-83-1, 68909-84-2, 68909-82-0, 27213-90-7, 26264-58-4, 27178-87-6, 111163-74-7, 908356-16-1, 25417-20-3, 25638-17-9, 145578-88-7, 1322-93-6, 1323-19-9, 7403-47-6, 68442-09-1, 127646-44-0, 908356-18-3)Limited to no more than 30% by weight in pesticide end-use productsSurfactants, related adjuvants of surfactants Sodium 1,4-dihexyl sulfosuccinate (CAS Reg. No. 3006-15-3)Surfactants, related adjuvants of surfactants Sodium 1,4-diisobutyl sulfosuccinate (CAS Reg. No. 127-39-9)Surfactants, related adjuvants of surfactants Sodium dioctylsulfosuccinateSurfactants, related adjuvants of surfactants Sodium 1,4-dipentyl sulfosuccinate (CAS Reg. No. 922-80-5)Surfactants, related adjuvants of surfactants Sodium hydroxideNeutralizer Sodium monoalkyl and dialkyl (C6-C16) phenoxy benzenedisulfonates and related acids (CAS Reg. Nos. 147732-59-0, 147732-60-3, 169662-22-0, 70191-75-2, 36445-71-3, 39354-74-0, 70146-13-3, 119345-03-8, 149119-20-0, 149119-19-7, 119345-04-9, 28519-02-0, 25167-32-2, 30260-73-2, 65143-89-7, 70191-76-3)Not to exceed 20% in pesticide formulationsSurfactants, related adjuvants of surfactants Sodium N-oleoyl-N-methyl taurine (CAS Reg. No. 137-20-2)Surfactants, related adjuvants of surfactants Sodium and potassium salts of N-alkyl (C8-C18)-beta-iminodipropionic acid where the C8-C18 is linear and may be saturated and/or unsaturated (CAS Reg. Nos. 110676-19-2, 3655-00-3, 61791-56-8, 14960-06-6, 26256-79-1, 90170-43-7, 91696-17-2, 97862-48-1)Concentration in formulated end-use products not to exceed 30% by weight in pesticide formulationsSurfactants, related adjuvants of surfactants Sodium starch glycolate (CAS Reg. No. 9063-38-1)Granular and tableted products only; not to exceed 8% of the formulated productDisintegrant Sodium sulfateSolid diluent, carrier Sorbitan fatty acid esters (fatty acids limited to C12, C14, C16, and C18 containing minor amounts of associated fatty acids) and poly(oxyethylene) derivatives of sorbitan fatty acid esters; the poly(oxyethylene) content averages 16-20 molesBuffering agent; corrosion inhibition SorbitolAntidusting agent. Stearic acid (CAS Reg. No. 57-11-4)Lubricant, component animal tag α-Stearoyl-ω-hydroxypoly(oxyethylene), average molecular weight (in amu) of 600Emulsifier α-Stearoyl-ω-hydroxypoly(oxyethylene); the poly(oxyethylene) content averages 8, 9, or 40 moles; if a blend of products is used, the average number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be 8, 9, or 40Surfactants; related adjuvants of surfactants Sulfite liquors and cooking liquors, spent, oxidized (CAS Reg. No. 68514-09-0)Surfactant, related adjuvants of surfactants Sulfur (CAS Reg. No. 7704-34-9)Stabilizer Talc Do. Tall oil; fatty acids not less than 58%, rosin acids not more than 44%, unsaponifiables not more than 8%Surfactants, related adjuvants of surfactants Tall oil fatty acids (CAS Reg. No. 61790-12-3)Solvent/carrier TartrazineDye, coloring agent Tetraethyl orthosilicate (CAS Reg. No. 78-10-4)Not to exceed 2% by weight of pesticide formulationsBinder. N,N,N′,N″,-tetrakis-(2-hydroxypropyl) ethylenediamine (CAS Reg. No. 102-60-3)Concentration in formulated end-use products not to exceed 20% by weight in pesticide formulationsStabilizer for formulation. Trans-1,3,3,3-tetrafluoroprop-1-ene (CAS Reg. No. 29118-24-9)Propellant. 2,4,7,9-Tetramethyl-5-decyne-4.7-diolNot more than 2.5% of pesticide formulationSurfactants, related adjuvants of surfactants Titanium dioxide (CAS Reg. No. 13463-67-7)Pigment/colorant in pesticide formulations for animal tag Toluenesulfonic acid and its ammonium, calcium, magnesium, potassium, sodium, and zinc salts Do. Triacetin (glyceryl triacetate)Solvent, cosolvent Trisodium phosphatePrecipitant, buffer, filler 1-undecanol (CAS Reg. No. 112-42-5), 1-tetradecanol (CAS Reg. No. 112-72-1), 1-octadecanol (CAS Reg. No. 112-92-5), 1-eicosanol (CAS Reg. No. 629-96-9), 1-docosanol (CAS Reg. No. 661-19-8), alcohols, C16-18, distn. residues (CAS Reg. No. 68603-17-8 & CAS Reg. No. 1190630-03-5), alkenes, C18-22, mixed with polyethylene, oxidized, hydrolyzed, distn. residues from C16-18 alcs. manuf. (CAS Reg. No. 1430895-61-6), alkenes, C18-22, mixed with polyethylene, oxidized, hydrolyzed, distn. residues from C20-22 alcs. manuf. (CAS Reg. No. 1430895-62-7)Carrier/Adjuvant and Coating Agent/Binder. Waxes and waxy substances, rice bran, oxidized (CAS Reg. No. 1883583-80-9)Flow aid, surface protectant, film-forming agent, carrier, coating agent, or adjuvant XyleneSolvent, cosolvent Xylenesulfonic acid and its ammonium, calcium, magnesium, potassium, sodium, and zinc saltsSurfactants, related adjuvants of surfactants Zein (CAS Reg. No. 9010-66-6)Not more than 10,000 ppm in the pesticide formulationStabilizing agent. Zinc oxideSolid diluent, carrier Zinc stearate, conforming to 21 CFR 182.5994 and 582.5994Water repellant, dessicant, and coating agent. Zinc stearate (CAS Reg. No. 557-05-1)Water repellant, desiccant, and coating agent; stabilizer, component of plastic animal tag Zinc sulfate (basic and monohydrate)Water repellant, dessicant, and coating agent
[69 FR 23130, Apr. 28, 2004] Editorial Note:For Federal Register citations affecting § 180.930, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and at www.govinfo.gov.

§ 180.940 - Tolerance exemptions for active and inert ingredients for use in antimicrobial formulations (Food-contact surface sanitizing solutions).

Residues of the following chemical substances are exempted from the requirement of a tolerance when used in accordance with good manufacturing practice as ingredients in an antimicrobial pesticide formulation, provided that the substance is applied on a semi-permanent or permanent food-contact surface (other than being applied on food packaging) with adequate draining before contact with food.

(a) The following chemical substances when used as ingredients in an antimicrobial pesticide formulation may be applied to: Food-contact surfaces in public eating places, dairy-processing equipment, and food-processing equipment and utensils.

Table 1 to Paragraph (a)

Pesticide Chemical CAS Reg. No. Limits Acetal105-57-7When ready for use, the end-use concentration is not to exceed 100 ppm acetaldehyde ethyl cis-3-hexenyl acetal28069-74-1When ready for use, the end-use concentration is not to exceed 100 ppm Acetanisole100-06-1When ready for use, the end-use concentration is not to exceed 100 ppm Acetic acid64-19-7When ready for use, the end-use concentration is not to exceed 100 ppm Acetic acid, octyl ester112-14-1When ready for use, the end-use concentration is not to exceed 100 ppm Acetophenone98-86-2When ready for use, the end-use concentration is not to exceed 100 ppm Adipic acid124-04-9When ready for use, the end-use concentration is not to exceed 100 ppm alcohols, C16-18, distn. residues68603-17-8 1190630-03-5 alkenes, C18-22, mixed with polyethylene, oxidized, hydrolyzed, distn. residues from C16-18 alcs. manuf1430895-61-6 alkenes, C18-22, mixed with polyethylene, oxidized, hydrolyzed, distn. residues from C20-22 alcs. manuf1430895-62-7 Alkylbenzene sulfonates (branched and linear) of chain lengths C10-C16, including benzenesulfonic acid, dodecyl and benzenesulfonic acid, dodecyl-, sodium salt27176-87-0
25155-30-0
When ready for use, the end-use concentration is not to exceed 700 ppm Alkyl cylcohexylpropionate2705-87-5When ready for use, the end-use concentration is not to exceed 100 ppm α-Alkyl-ω-hydroxypoly (oxypropylene) and/or poly (oxyethylene) polymers where the alkyl chain contains a minimum of six carbons9002-92-0; 9004-95-9; 9004-98-2; 9005-00-9; 9035-85-2; 9038-29-3; 9038-43-1; 9040-05-5; 9043-30-5; 9087-53-0; 25190-05-0; 24938-91-8; 25231-21-4; 251553-55-6; 26183-52-8; 26468-86-0; 26636-39-5; 26636-40-8; 27252-75-1; 27306-79-2; 31726-34-8; 32128-65-7; 34398-01-1; 34398-05-5; 37251-67-5; 37311-00-5; 37311-01-6; 37311-02-7; 37311-04-9; 39587-22-9; 50861-66-0; 52232-09-4; 52292-17-8; 52609-19-5; 57679-21-7; 59112-62-8; 60636-37-5; 60828-78-6; 61702-78-1; 61723-78-2; 61725-89-1; 61791-13-7; 61791-20-6; 61791-28-4; 61804-34-0; 61827-42-7; 61827-84-7; 62648-50-4; 63303-01-5; 63658-45-7; 63793-60-2; 64366-70-7; 64415-24-3; 64415-25-4; 64425-86-1; 65104-72-5; 65150-81-4; 66455-14-9: 66455-15-0; 67254-71-1; 67763-08-0; 68002-96-0; 68002-97-1; 68131-39-5; 68131-40-8; 68154-96-1; 68154-97-2; 68154-98-3; 68155-01-1; 68213-23-0; 68213-24-1; 68238-81-3; 68238-82-4; 68409-58-5; 68409-59-6; 68439-30-5; 68439-45-2; 68439-46-3; 68439-48-5; 68439-49-6; 68439-50-9; 68439-51-0; 68439-53-2; 68439-54-3; 68458-88-8; 68526-94-3; 68526-95-4; 68551-12-2; 68551-13-3; 68551-14-4; 68603-20-3; 68603-25-8; 68920-66-1; 68920-69-4; 68937-66-6; 68951-67-7; 68954-94-9; 68987-81-5; 68991-48-0; 69011-36-5; 69013-18-9; 69013-19-0; 69227-20-9; 69227-21-0; 69227-22-1; 69364-63-2; 70750-27-5; 70879-83-3; 70955-07-6; 71011-10-4; 71060-57-6; 71243-46-4; 72066-65-0; 72108-90-8; 72484-69-6; 72854-13-8; 72905-87-4; 73018-31-2; 73049-34-0; 74432-13-6; 74499-34-6; 78330-19-5; 78330-20-8; 78330-21-9; 78330-23-1; 79771-03-2; 84133-50-6; 85422-93-1; 97043-91-9; 97953-22-5; 102782-43-4; 103331-86-8; 103657-84-7; 103657-85-8; 103818-93-5; 103819-03-0; 106232-83-1; 111905-54-5; 116810-31-2; 116810-32-3; 116810-33-4; 120313-48-6; 120944-68-5; 121617-09-2; 126646-02-4; 126950-62-7; 127036-24-2; 139626-71-4; 152231-44-2; 154518-36-2; 157627-86-6; 157627-88-8; 157707-41-0; 157707-43-2; 159653-49-3; 160875-66-1; 160901-20-2; 160901-09-7; 160901-19-9; 161025-21-4; 161025-22-5; 161133-70-6; 166736-08-9; 169107-21-5; 172588-43-1; 176022-76-7; 196823-11-7; 287935-46-0; 288260-45-7; 303176-75-2; 954108-36-2; 2222805-23-2; 2409830-33-5None C10-C18-Alkyl dimethyl amine oxides1643-20-5, 2571-88-2, 2605-79-0, 3332-27-2, 61788-90-7, 68955-55-5, 70592-80-2, 7128-91-8, 85408-48-6, and 85408-49-7When ready for use, the end-use concentration is not to exceed 1,350 ppm Allspice oil (Pimenta officinalis Lindl.)8006-77-7When ready for use, the end-use concentration is not to exceed 100 ppm allyl alpha-ionone79-78-7When ready for use, the end-use concentration is not to exceed 100 ppm Aluminum sulfate10043-01-3When ready for use, the end-use concentration is not to exceed 50 ppm 2-propen-1-aminium, N,N-dimethyl-N-propenyl-, chloride, homopolymer26062-79-3When ready for use, the end-use concentration is not to exceed 0.6% Ammonium chloride12125-02-9When ready for use, the end-use concentration is not to exceed 48 ppm Amyl butyrate540-18-1When ready for use, the end-use concentration is not to exceed 100 ppm Amyl formate638-49-3When ready for use, the end-use concentration is not to exceed 100 ppm Amyl hexanoate540-07-8When ready for use, the end-use concentration is not to exceed 100 ppm Amylopectin, acid-hydrolyzed, 1-oxtenylbutanedioate113894-85-2None Amylopectin, hydrogen 1-octadecenylbutanedioate125109-81-1None p-Anisyl acetate104-21-2When ready for use, the end-use concentration is not to exceed 100 ppm Anisyl formate122-91-8When ready for use, the end-use concentration is not to exceed 100 ppm Anisyl propionate7549-33-9When ready for use, the end-use concentration is not to exceed 100 ppm Aspartic acid, N-(1,2-dicarboxyethyl)-, tetrasodium salt144538-83-0When ready for use, the end-use concentration is not to exceed 5000 ppm Balsam oil, Peru (Myroxylon pereirae Klotzsch)8007-00-9When ready for use, the end-use concentration is not to exceed 100 ppm Benzaldehyde100-52-7When ready for use, the end-use concentration is not to exceed 100 ppm Benzaldehyde, methyl-1334-78-7When ready for use, the end-use concentration is not to exceed 100 ppm Benzene, 1,2-dimethoxy-91-16-7When ready for use, the end-use concentration is not to exceed 100 ppm Benzene, 2-methoxy-4-methyl-1-(1-methylethyl)-1076-56-8When ready for use, the end-use concentration is not to exceed 100 ppm Benzeneacetaldehyde122-78-1When ready for use, the end-use concentration is not to exceed 100 ppm Benzoic acid65-85-0When ready for use, the end-use concentration is not to exceed 100 ppm Benzoin gum, Sumatra9000-05-9When ready for use, the end-use concentration is not to exceed 100 ppm Benzyl acetate140-11-4When ready for use, the end-use concentration is not to exceed 100 ppm benzyl alcohol100-51-6When ready for use, the end-use concentration is not to exceed 100 ppm Benzyl benzoate120-51-4When ready for use, the end-use concentration is not to exceed 100 ppm benzyl butyrate103-37-7When ready for use, the end-use concentration is not to exceed 100 ppm Benzyl cinnamate103-41-3When ready for use, the end-use concentration is not to exceed 100 ppm Benzyl formate104-57-4When ready for use, the end-use concentration is not to exceed 100 ppm benzyl isobutyrate103-28-6When ready for use, the end-use concentration is not to exceed 100 ppm benzyl propionate122-63-4When ready for use, the end-use concentration is not to exceed 100 ppm Benzyl salicylate118-58-1When ready for use, the end-use concentration is not to exceed 100 ppm Benzyl trans-2-methyl-2-butenoate37526-88-8When ready for use, the end-use concentration is not to exceed 100 ppm benzaldehyde, 4-methoxy-123-11-5When ready for use, the end-use concentration is not to exceed 100 ppm benzenemethanol, alpha-methyl-, 1-acetate93-92-5When ready for use, the end-use concentration is not to exceed 100 ppm benzoic acid, ethyl ester93-89-0When ready for use, the end-use concentration is not to exceed 100 ppm Bicyclo(2.2.1)heptan-2-ol, 1,3,3-trimethyl-1632-73-1When ready for use, the end-use concentration is not to exceed 100 ppm Bicyclo(2.2.1)heptan-2-ol, 1,7,7-trimethyl-,propanoate, exo-2756-56-1When ready for use, the end-use concentration is not to exceed 100 ppm Bicyclo[3.1.1]heptane, 6,6-dimethyl-2-methylene-127-91-3When ready for use, the end-use concentration is not to exceed 100 ppm Bisabolene495-62-5When ready for use, the end-use concentration is not to exceed 100 ppm 1,4-Bis[[3-[2-(2-hydroxyethoxy)ethoxy]propyl]amino]-9,10-anthracenedione (CAS Reg. No. 123944-63-8)0.5% by weightDye, coloring agent Bois de rose oil8015-77-8When ready for use, the end-use concentration is not to exceed 100 ppm Borneol507-70-0When ready for use, the end-use concentration is not to exceed 100 ppm endo-Bornyl acetate76-49-3When ready for use, the end-use concentration is not to exceed 100 ppm Butanoic acid, 1,1-dimethyl-2-phenylethyl ester10094-34-5When ready for use, the end-use concentration is not to exceed 100 ppm Butanoic acid, 3-methyl-, 2-methylpropyl ester589-59-3When ready for use, the end-use concentration is not to exceed 100 ppm butanoic acid, 3-oxo-, ethyl ester141-97-9When ready for use, the end-use concentration is not to exceed 100 ppm 2-buten-1-one, 1-(2,6,6-trimethyl-1,3-cyclohexadien-1-yl)-23696-85-7When ready for use, the end-use concentration is not to exceed 100 ppm 3-buten-2-one, 3-methyl-4-(2,6,6-trimethyl-2-cyclohexen-1-yl)-127-51-5When ready for use, the end-use concentration is not to exceed 100 ppm 3-Buten-2-one, 4-(2,6,6-trimethyl-1-cyclohexen-1-yl)-14901-07-6; 79-77-6When ready for use, the end-use concentration is not to exceed 100 ppm Butryic acid107-92-6When ready for use, the end-use concentration is not to exceed 100 ppm Butyl acetate123-86-4When ready for use, the end-use concentration is not to exceed 100 ppm Butyl alcohol71-36-3When ready for use, the end-use concentration is not to exceed 100 ppm Butyl butyrate109-21-7When ready for use, the end-use concentration is not to exceed 100 ppm Butyl butyryllactate7492-70-8When ready for use, the end-use concentration is not to exceed 100 ppm Butyl isovalerate109-19-3When ready for use, the end-use concentration is not to exceed 100 ppm Butyl sulfide544-40-1When ready for use, the end-use concentration is not to exceed 100 ppm Butyl 10-undecenoate109-42-2When ready for use, the end-use concentration is not to exceed 100 ppm n-Butyl benzoate136-60-7When ready for use, the end-use concentration is not to exceed 15,000 ppm n-Butyl 2-methylbutyrate15706-73-7When ready for use, the end-use concentration is not to exceed 100 ppm n-Butyl-3-hydroxybutyrate53605-94-0Solvent γ-Butyrolactone96-48-0When ready for use, the end-use concentration is not to exceed 100 ppm Cadinene29350-73-0; 523-47-7When ready for use, the end-use concentration is not to exceed 100 ppm Calcium bisulfateWhen ready for use, the end-use concentration is not to exceed 2,000 ppm Calcium sulfate7778-18-9When ready for use, the end-use concentration is not to exceed 100 ppm Camphene79-92-5When ready for use, the end-use concentration is not to exceed 100 ppm Cananga oil68606-83-7When ready for use, the end-use concentration is not to exceed 100 ppm δ-3-Carene13466-78-9When ready for use, the end-use concentration is not to exceed 100 ppm Carvacrol499-75-2When ready for use, the end-use concentration is not to exceed 100 ppm 4-Carvomenthenol562-74-3When ready for use, the end-use concentration is not to exceed 100 ppm Carvyl acetate97-42-7When ready for use, the end-use concentration is not to exceed 100 ppm β-Caryophyllene87-44-5When ready for use, the end-use concentration is not to exceed 100 ppm Cassia bark oil8007-80-5When ready for use, the end-use concentration is not to exceed 100 ppm Celery seed oil8015-90-5When ready for use, the end-use concentration is not to exceed 100 ppm Chamomile flower, Roman, oil (Anthemis nobilis L.)8015-92-7When ready for use, the end-use concentration is not to exceed 100 ppm Cinnamic acid; trans-Cinnamic acid621-82-9; 140-10-3When ready for use, the end-use concentration is not to exceed 100 ppm cinnamic aldehyde104-55-2When ready for use, the end-use concentration is not to exceed 100 ppm cinnamic alcohol104-54-1When ready for use, the end-use concentration is not to exceed 100 ppm Cinnamon leaf oil84649-98-9When ready for use, the end-use concentration is not to exceed 100 ppm Cinnamyl acetate103-54-8When ready for use, the end-use concentration is not to exceed 100 ppm Cinnamyl benzoate5320-75-2When ready for use, the end-use concentration is not to exceed 100 ppm Cinnamyl cinnamate122-69-0When ready for use, the end-use concentration is not to exceed 100 ppm Cinnamyl formate104-65-4When ready for use, the end-use concentration is not to exceed 100 ppm Cinnamyl isobutyrate103-59-3When ready for use, the end-use concentration is not to exceed 100 ppm Cinnamyl propionate103-56-0When ready for use, the end-use concentration is not to exceed 100 ppm Citral5392-40-5When ready for use, the end-use concentration is not to exceed 100 ppm Citral dimethyl acetal7549-37-3When ready for use, the end-use concentration is not to exceed 100 ppm Citronellal106-23-0When ready for use, the end-use concentration is not to exceed 100 ppm Citronellol106-22-9When ready for use, the end-use concentration is not to exceed 100 ppm Citronelloxyacetaldehyde7492-67-3When ready for use, the end-use concentration is not to exceed 100 ppm Citronellyl acetate150-84-5When ready for use, the end-use concentration is not to exceed 100 ppm Citronellyl butyrate141-16-2When ready for use, the end-use concentration is not to exceed 100 ppm Citronellyl formate105-85-1When ready for use, the end-use concentration is not to exceed 100 ppm Citronellyl isobutyrate97-89-2When ready for use, the end-use concentration is not to exceed 100 ppm Citronellyl propionate141-14-0When ready for use, the end-use concentration is not to exceed 100 ppm Citronellyl tiglate24717-85-9When ready for use, the end-use concentration is not to exceed 100 ppm Citrus, ext.94266-47-4When ready for use, the end-use concentration is not to exceed 100 ppm Clary oil (Salvia sclarea L.)8016-63-5When ready for use, the end-use concentration is not to exceed 100 ppm Cloves (Eugenia spp.)84961-50-2When ready for use, the end-use concentration is not to exceed 100 ppm Cognac oil, green8016-21-5When ready for use, the end-use concentration is not to exceed 100 ppm Copper sulfate pentahydrate7758-99-8When ready for use, the end-use concentration is not to exceed 80 ppm Coriander oil (Coriandrum sativum L.)8008-52-4When ready for use, the end-use concentration is not to exceed 100 ppm Cornmint oil68917-18-0When ready for use, the end-use concentration is not to exceed 100 ppm Cuminaldehyde122-03-2When ready for use, the end-use concentration is not to exceed 100 ppm Currant buds black absolute (Ribes nigrum L.)68606-81-5When ready for use, the end-use concentration is not to exceed 100 ppm Cyclohexadiene, methyl-30640-46-1; 1888-90-0When ready for use, the end-use concentration is not to exceed 100 ppm Cyclohexene, 1-methyl-4-(1-methylethylidene)-586-62-9When ready for use, the end-use concentration is not to exceed 100 ppm 1-Cyclohexylethanol1193-81-3When ready for use, the end-use concentration is not to exceed 100 ppm 2-Cyclohexylethyl acetate21722-83-8When ready for use, the end-use concentration is not to exceed 100 ppm p-Cymene99-87-6When ready for use, the end-use concentration is not to exceed 100 ppm β-Damascone, (Z)-23726-92-3When ready for use, the end-use concentration is not to exceed 100 ppm δ-decalactone705-86-2When ready for use, the end-use concentration is not to exceed 100 ppm γ-decalactone706-14-9When ready for use, the end-use concentration is not to exceed 100 ppm ε-Decalactone5579-78-2When ready for use, the end-use concentration is not to exceed 100 ppm Decanal112-31-2When ready for use, the end-use concentration is not to exceed 100 ppm Decanoic acid334-48-5When ready for use, the end-use concentration is not to exceed 100 ppm Decanoic acid, 4-hydroxy-4-methyl-γ-lactone7011-83-8When ready for use, the end-use concentration is not to exceed 100 ppm 1-Decanol112-30-1When ready for use, the end-use concentration is not to exceed 100 ppm 2-Decenal3913-71-1When ready for use, the end-use concentration is not to exceed 100 ppm (E)-4-Decenal65405-70-1When ready for use, the end-use concentration is not to exceed 100 ppm 4-Decenal30390-50-2When ready for use, the end-use concentration is not to exceed 100 ppm 9-Decenal39770-05-3When ready for use, the end-use concentration is not to exceed 100 ppm Decyl acetate112-17-4When ready for use, the end-use concentration is not to exceed 100 ppm D-Glucopyranose, oligomeric, decyl octyl glycosides68515-73-1None 1,3-dibromo-5,5-dimethylhydantoin77-48-5None 1,1-diethoxy-3,7-dimethylocta-2,6-diene7492-66-2When ready for use, the end-use concentration is not to exceed 100 ppm diethyl malonate105-53-3When ready for use, the end-use concentration is not to exceed 100 ppm Diethyl sebacate110-40-7When ready for use, the end-use concentration is not to exceed 100 ppm Diethyl tartrate87-91-2When ready for use, the end-use concentration is not to exceed 100 ppm dihydro-beta-ionone17283-81-7When ready for use, the end-use concentration is not to exceed 100 ppm dihydrocarvyl acetate20777-49-5When ready for use, the end-use concentration is not to exceed 100 ppm m-Dimethoxybenzene151-10-0When ready for use, the end-use concentration is not to exceed 100 ppm p-Dimethoxybenzene150-78-7When ready for use, the end-use concentration is not to exceed 100 ppm 2,6-Dimethoxyphenol91-10-1When ready for use, the end-use concentration is not to exceed 100 ppm 3,7-Dimethyl-1-octanol106-21-8When ready for use, the end-use concentration is not to exceed 100 ppm 2,2-Dimethyl-1,3-dioxolane-4-methanol100-79-8 2,6-Dimethyl-4-heptanol108-82-7When ready for use, the end-use concentration is not to exceed 100 ppm. 2,6-Dimethyl-5-heptanal106-72-9When ready for use, the end-use concentration is not to exceed 100 ppm 3,7-Dimethyl-1,3,6-octatriene13877-91-3When ready for use, the end-use concentration is not to exceed 100 ppm 3,7-Dimethyl-6-octenoic acid502-47-6When ready for use, the end-use concentration is not to exceed 100 ppm Dimethylbenzylcarbinyl acetate151-05-3When ready for use, the end-use concentration is not to exceed 100 ppm Dimethylcyclohex-3-ene-1-carbaldehyde27939-60-2When ready for use, the end-use concentration is not to exceed 100 ppm α,α-Dimethylphenethyl alcohol100-86-7When ready for use, the end-use concentration is not to exceed 100 ppm p,α-Dimethylstyrene1195-32-0When ready for use, the end-use concentration is not to exceed 100 ppm. Di-n-butyl carbonate542-52-9When ready for use, the end-use concentration is not to exceed 15,000 ppm Dipropylene glycol25265-71-8None 1-docosanol661-19-8 γ-Dodecalactone2305-05-7When ready for use, the end-use concentration is not to exceed 100 ppm δ-Dodecalactone713-95-1When ready for use, the end-use concentration is not to exceed 100 ppm 2-Dodecanol, (2E)-20407-84-5When ready for use, the end-use concentration is not to exceed 100 ppm 2-Dodecenal4826-62-4When ready for use, the end-use concentration is not to exceed 100 ppm 1-eicosanol629-96-9 Ethanol64-17-5None Elemi oil (Canarium spp.)8023-89-0When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl acetate141-78-6When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl anthranilate87-25-2When ready for use, the end-use concentration is not to exceed 100 ppm 4-Ethylbenzaldehyde4748-78-1When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl benzoylacetate94-02-0When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl butyrate105-54-4When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl cinnamate103-36-6When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl (2E,4Z)-2,4-decadienoate3025-30-7When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl decanoate110-38-3When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl formate109-94-4When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl heptanoate106-30-9When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl hexanoate123-66-0When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl 2-hexylacetoacetate29214-60-6When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl 3-hydroxybutyrate5405-41-4When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl isobutyrate97-62-1When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl isovalerate108-64-5When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl laurate106-33-2When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl levulinate539-88-8When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl 2-methyl-3-pentenoate1617-23-8When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl 2-methylbutyrate452-79-1When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl 2-methylpentanoate39255-32-8When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl nonanoate123-29-5When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl octanoate106-32-1When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl propionate105-37-3When ready for use, the end-use concentration is not to exceed 100 ppm ethyl salicylate118-61-6When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl tiglate5837-78-5When ready for use, the end-use concentration is not to exceed 100 ppm ethylene brassylate105-95-3When ready for use, the end-use concentration is not to exceed 100 ppm Ethylenediaminetetraacetic acid (EDTA), tetrasodium salt64-02-8None 4-Ethylguaiacol2785-89-9When ready for use, the end-use concentration is not to exceed 100 ppm p-Ethylphenol123-07-9When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl phenylacetate101-97-3When ready for use, the end-use concentration is not to exceed 100 ppm Ethyl 3-phenylpropionate2021-28-5When ready for use, the end-use concentration is not to exceed 100 ppm Eugenyl acetate93-28-7When ready for use, the end-use concentration is not to exceed 100 ppm FD&C Green No. 3CAS Reg. No. 2353-45-9None FD&C Red No. 4025956-17-6When ready for use, the end-use concentration is not to exceed 20 ppm FD&C Yellow No. 51934-21-0When ready for use, the end-use concentration is not to exceed 1000 ppm α-Farnesene125037-13-0; 502-61-4When ready for use, the end-use concentration is not to exceed 100 ppm Farnesol4602-84-0When ready for use, the end-use concentration is not to exceed 100 ppm Farnesyl acetate29548-30-9When ready for use, the end-use concentration is not to exceed 100 ppm 2-Formyl-6,6-dimethylbicyclo(3.1.1)hept-2-ene564-94-3When ready for use, the end-use concentration is not to exceed 100 ppm Galbanum oil (Ferula spp.)8023-91-4When ready for use, the end-use concentration is not to exceed 100 ppm Geranic acid459-80-3When ready for use, the end-use concentration is not to exceed 100 ppm Geraniol106-24-1When ready for use, the end-use concentration is not to exceed 100 ppm (E)-Geraniol106-24-1When ready for use, the end-use concentration is not to exceed 100 ppm (E)-Geraniol acetate105-87-3When ready for use, the end-use concentration is not to exceed 100 ppm Geranyl benzoate94-48-4When ready for use, the end-use concentration is not to exceed 100 ppm. Geranyl butyrate106-29-6When ready for use, the end-use concentration is not to exceed 100 ppm Geranyl formate105-86-2When ready for use, the end-use concentration is not to exceed 100 ppm Geranyl isobutyrate2345-26-8When ready for use, the end-use concentration is not to exceed 100 ppm Geranyl phenylacetate102-22-7When ready for use, the end-use concentration is not to exceed 100 ppm. Geranyl propionate105-90-8When ready for use, the end-use concentration is not to exceed 100 ppm Geranyl tiglate7785-33-3When ready for use, the end-use concentration is not to exceed 100 ppm C1-C4 linear and branched chain alkyl d-glucitol dianhydro alkyl ethers cluster5306-85-4; 30915-81-2; 107644-13-3; 103594-41-8; 103594-42-9When ready for use, the end-use concentration is not to exceed 500 ppm D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(1-methylpropyl)-,None D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(2-methylpropyl)-, (CAS Reg. No. not assigned)None D-glucurono-6-deoxy-L-manno-D-glucan, acetate, calcium magnesium potassium sodium salt (diutan gum)(CAS No. 595585-15-2)None glyceryl triacetate102-76-1When ready for use, the end-use concentration is not to exceed 100 ppm Guaiacol90-05-1When ready for use, the end-use concentration is not to exceed 100 ppm. Guaiene88-84-6When ready for use, the end-use concentration is not to exceed 100 ppm. Helichrysum leaf oil (Helichrysum angustifolium)8023-95-8When ready for use, the end-use concentration is not to exceed 100 ppm γ-Heptalactone105-21-5When ready for use, the end-use concentration is not to exceed 100 ppm. Heptanal111-71-7When ready for use, the end-use concentration is not to exceed 100 ppm Heptanoic acid111-14-8When ready for use, the end-use concentration is not to exceed 100 ppm 2-Heptanol543-49-7When ready for use, the end-use concentration is not to exceed 100 ppm 2-hepten-4-one, 5-methyl-81925-81-7When ready for use, the end-use concentration is not to exceed 100 ppm trans-3-Heptenyl 2-methylpropanoate67801-45-0When ready for use, the end-use concentration is not to exceed 100 ppm Heptyl acetate112-06-1When ready for use, the end-use concentration is not to exceed 100 ppmHeptyl alcohol111-70-6When ready for use, the end-use concentration is not to exceed 100 ppm γ-Hexalactone695-06-7When ready for use, the end-use concentration is not to exceed 100 ppm Hexanal66-25-1When ready for use, the end-use concentration is not to exceed 100 ppm Hexanoic acid142-62-1When ready for use, the end-use concentration is not to exceed 100 ppm n-Hexanol111-27-3When ready for use, the end-use concentration is not to exceed 100 ppm Hexadecanoic acid57-10-3When ready for use, the end-use concentration is not to exceed 100 ppm Hexadecanoic acid, ethyl ester628-97-7When ready for use, the end-use concentration is not to exceed 100 ppm ω-6-Hexadecenlactone7779-50-2When ready for use, the end-use concentration is not to exceed 100 ppm 2,4-Hexadienyl isobutyrate16491-24-0When ready for use, the end-use concentration is not to exceed 100 ppm 1-Hexanol, 3,5,5-trimethyl-3452-97-9When ready for use, the end-use concentration is not to exceed 100 ppm 2-Hexenal, (2E)-6728-26-3When ready for use, the end-use concentration is not to exceed 100 ppm. 2-Hexen-1-ol2305-21-7When ready for use, the end-use concentration is not to exceed 100 ppm 3-Hexen-1-ol, (3Z)-928-96-1When ready for use, the end-use concentration is not to exceed 100 ppm (E)-2-Hexen-1-yl acetate2497-18-9When ready for use, the end-use concentration is not to exceed 100 ppm (Z)-3-Hexenol928-96-1When ready for use, the end-use concentration is not to exceed 100 ppm (Z)-3-Hexenol acetate3681-71-8When ready for use, the end-use concentration is not to exceed 100 ppm cis-3-Hexenyl benzoate25152-85-6When ready for use, the end-use concentration is not to exceed 100 ppm cis-3-Hexenyl butyrate16491-36-4When ready for use, the end-use concentration is not to exceed 100 ppm 5-(cis-3-Hexenyl)dihydro-5-methyl-2(3H)furanone70851-61-5When ready for use, the end-use concentration is not to exceed 100 ppm cis-3-Hexenyl hexanoate31501-11-8When ready for use, the end-use concentration is not to exceed 100 ppm cis-3-Hexenyl isobutyrate41519-23-7When ready for use, the end-use concentration is not to exceed 100 ppm 3-Hexenyl 2-methylbutanoate10094-41-4When ready for use, the end-use concentration is not to exceed 100 ppm cis-3-Hexenyl propionate33467-74-2When ready for use, the end-use concentration is not to exceed 100 ppm cis-3-Hexenyl tiglate67883-79-8When ready for use, the end-use concentration is not to exceed 100 ppm 3-Hexenyl formate9/5/2315When ready for use, the end-use concentration is not to exceed 100 ppm Hexyl acetate142-92-7When ready for use, the end-use concentration is not to exceed 100 ppm Hexyl benzoate6789-88-4When ready for use, the end-use concentration is not to exceed 100 ppm Hexyl butyrate2639-63-6When ready for use, the end-use concentration is not to exceed 100 ppm Hexyl hexanoate6378-65-0When ready for use, the end-use concentration is not to exceed 100 ppm Hexyl isobutyrate2349-07-7When ready for use, the end-use concentration is not to exceed 100 ppm Hexyl 2-methylbutanoate10032-15-2When ready for use, the end-use concentration is not to exceed 100 ppm Hexyl octanoate1117-55-1When ready for use, the end-use concentration is not to exceed 100 ppm Hexyl propionate2445-76-3When ready for use, the end-use concentration is not to exceed 100 ppm Hydrogen peroxide7722-84-1When ready for use, the end-use concentration is not to exceed 91 ppm Hydroxycitronellal107-75-5When ready for use, the end-use concentration is not to exceed 100 ppm Hydroxycitronellal dimethyl acetal141-92-4When ready for use, the end-use concentration is not to exceed 100 ppm Hydroxycitronellol107-74-4When ready for use, the end-use concentration is not to exceed 100 ppm 1,4-Bis[[3-[2-(2-hydroxyethoxy)ethoxy]propyl]amino]-9,10-anthracenedione123944-63-8When ready for use, the end-use concentration is not to exceed 300 ppm Hydroxynonanoic acid, δ-lactone3301-94-8When ready for use, the end-use concentration is not to exceed 100 ppm 4-(p-hydroxyphenyl)-2-butanone5471-51-2When ready for use, the end-use concentration is not to exceed 100 ppm5-hydroxyundecanoic acid lactone710-04-3When ready for use, the end-use concentration is not to exceed 100 ppm Hypochlorous acid7790-92-3When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine. Hypochlorous acid, sodium salt7681-52-9When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine Hyssop oil (Hyssopus officinalis L.)8006-83-5When ready for use, the end-use concentration is not to exceed 100 ppm 1H-Indole120-72-9When ready for use, the end-use concentration is not to exceed 100 ppm Iodine7553-56-2When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine α-Ionone127-41-3When ready for use, the end-use concentration is not to exceed 100 ppm γ-Ionone79-76-5When ready for use, the end-use concentration is not to exceed 100 ppm α-Irone79-69-6When ready for use, the end-use concentration is not to exceed 100 ppm Isoamyl acetate123-92-2When ready for use, the end-use concentration is not to exceed 100 ppm Isoamyl alcohol123-51-3When ready for use, the end-use concentration is not to exceed 100 ppm Isoamyl benzoate94-46-2When ready for use, the end-use concentration is not to exceed 100 ppm Isoamyl butyrate106-27-4When ready for use, the end-use concentration is not to exceed 100 ppm Isoamyl cinnamate7779-65-9When ready for use, the end-use concentration is not to exceed 100 ppm Isoamyl isovalerate659-70-1When ready for use, the end-use concentration is not to exceed 100 ppm Isoamyl phenylacetate102-19-2When ready for use, the end-use concentration is not to exceed 100 ppm Isoamyl propionate105-68-0When ready for use, the end-use concentration is not to exceed 100 ppm Isoamyl salicylate87-20-7When ready for use, the end-use concentration is not to exceed 100 ppm Isoborneol124-76-5When ready for use, the end-use concentration is not to exceed 100 ppm Isobornyl acetate125-12-2When ready for use, the end-use concentration is not to exceed 100 ppm Isobutyl acetate110-19-0When ready for use, the end-use concentration is not to exceed 100 ppm Isobutyl angelate7779-81-9When ready for use, the end-use concentration is not to exceed 100 ppm Isobutyl benzoate120-50-3When ready for use, the end-use concentration is not to exceed 100 ppm Isobutyl 2-butenoate589-66-2When ready for use, the end-use concentration is not to exceed 100 ppm Isobutyl butyrate539-90-2When ready for use, the end-use concentration is not to exceed 100 ppm Isobutyl cinnamate122-67-8When ready for use, the end-use concentration is not to exceed 100 ppm. Isobutyl isobutyrate97-85-8When ready for use, the end-use concentration is not to exceed 100 ppm 2-Isobutyl-2-methyl-1,3-dioxolane-4-methanol5660-53-7 Isobutyl phenylacetate102-13-6When ready for use, the end-use concentration is not to exceed 100 ppm Isobutyl salicylate87-19-4When ready for use, the end-use concentration is not to exceed 100 ppm Isobutyraldehyde78-84-2When ready for use, the end-use concentration is not to exceed 100 ppm Isobutyric acid79-31-2When ready for use, the end-use concentration is not to exceed 100 ppm Isoeugenol97-54-1When ready for use, the end-use concentration is not to exceed 100 ppm Isoeugenyl acetate93-29-8When ready for use, the end-use concentration is not to exceed 100 ppm iso-Methyl-β-ionone79-89-0When ready for use, the end-use concentration is not to exceed 100 ppm Isopropyl acetate108-21-4When ready for use, the end-use concentration is not to exceed 100 ppm p-Isopropylacetophenone645-13-6When ready for use, the end-use concentration is not to exceed 100 ppm p-Isopropylbenzyl alcohol536-60-7When ready for use, the end-use concentration is not to exceed 100 ppm Isopropyl-3-hydroxybutyrate54074-94-1Solvent Isopropyl 2-methylbutyrate66576-71-4When ready for use, the end-use concentration is not to exceed 100 ppm 2-Isopropylphenol88-69-7When ready for use, the end-use concentration is not to exceed 100 ppm p-Isopropyl phenylacetaldehyde4395-92-0When ready for use, the end-use concentration is not to exceed 100 ppm Isopulegol89-79-2When ready for use, the end-use concentration is not to exceed 100 ppm Isovaleric acid503-74-2When ready for use, the end-use concentration is not to exceed 100 ppm Jasmine lactone25524-95-2When ready for use, the end-use concentration is not to exceed 100 ppm Jasmine oil (Jasminum grandiflorum L.)8022-96-6When ready for use, the end-use concentration is not to exceed 100 ppm Juniper oil (Juniperus communis L.)8002-68-4When ready for use, the end-use concentration is not to exceed 100 ppm Labdanum oil (Cistus spp.)8016-26-0When ready for use, the end-use concentration is not to exceed 100 ppm Lactic acid (including l-lactic acid)50-21-5, 79-33-4When ready for use, the end-use concentration is not to exceed 10,000 ppm in antimicrobial formulations applied to food-contact surfaces in public eating places laevo-Bornyl acetate5655-61-8When ready for use, the end-use concentration is not to exceed 100 ppm Lauryl acetate112-66-3When ready for use, the end-use concentration is not to exceed 100 ppm Lauric acid143-07-7When ready for use, the end-use concentration is not to exceed 100 ppm Lauric aldehyde112-54-9When ready for use, the end-use concentration is not to exceed 100 ppm Lauryl alcohol112-53-8When ready for use, the end-use concentration is not to exceed 100 ppm Lavandin oil (Lavandula hybrida)8022-15-9When ready for use, the end-use concentration is not to exceed 100 ppm Levulinic acid123-76-2When ready for use, the end-use concentration is not to exceed 100 ppm d-Limonene5989-27-5When ready for use, the end-use concentration is not to exceed 100 ppm Linalool78-70-6When ready for use, the end-use concentration is not to exceed 100 ppm Linalool acetate115-95-7When ready for use, the end-use concentration is not to exceed 100 ppm Linalyl acetate115-95-7When ready for use, the end-use concentration is not to exceed 100 ppm Linalyl benzoate126-64-7When ready for use, the end-use concentration is not to exceed 100 ppm Linalyl cinnamate78-37-5When ready for use, the end-use concentration is not to exceed 100 ppm Linalyl formate115-99-1When ready for use, the end-use concentration is not to exceed 100 ppm Linalyl hexanoate7779-23-9When ready for use, the end-use concentration is not to exceed 100 ppm Linalyl isobutyrate78-35-3When ready for use, the end-use concentration is not to exceed 100 ppm Linalyl isovalerate1118-27-0When ready for use, the end-use concentration is not to exceed 100 ppm Linalyl propionate144-39-8When ready for use, the end-use concentration is not to exceed 100 ppm Linoleic acid, methyl ester112-63-0When ready for use, the end-use concentration is not to exceed 100 ppm Lipase, triacylglycerol9001-62-1When ready for use, the end-use concentration is not to exceed 500 ppm Lovage oil (Levisticum officinale Koch)8016-31-7When ready for use, the end-use concentration is not to exceed 100 ppm Mace oil (Myristica fragrans Houtt.)8007-12-3When ready for use, the end-use concentration is not to exceed 100 ppm Magnesium oxide1309-48-4None Magnesium sulfate anhydrous7487-88-9When ready for use, the end-use concentration is not to exceed 4400 ppm Magnesium sulfate heptahydrate10034-99-8When ready for use, the end-use concentration is not to exceed 4400 ppm. Magnesium sulfate hexahydrate7830-18-1When ready for use, the end-use concentration is not to exceed 4400 ppm. Magnesium sulfate monohydrate14168-73-1When ready for use, the end-use concentration is not to exceed 4400 ppm. Magnesium sulfate pentahydrate5553-21-6When ready for use, the end-use concentration is not to exceed 4400 ppm. Magnesium sulfate tetrahydrate24378-31-2When ready for use, the end-use concentration is not to exceed 4400 ppm. Magnesium sulfate trihydrate15320-30-6When ready for use, the end-use concentration is not to exceed 4400 ppm. p-Mentha-1,8-dien-7-ol536-59-4When ready for use, the end-use concentration is not to exceed 100 ppm. p-Mentha-1,8-dien-7-yl acetate15111-96-3When ready for use, the end-use concentration is not to exceed 100 ppm. Menthol15356-70-4; 89-78-1; 1490-04-6When ready for use, the end-use concentration is not to exceed 100 ppm 4-Mercapto-4-methyl-2-pentanone19872-52-7When ready for use, the end-use concentration is not to exceed 100 ppm Methane sulfonic acid75-75-2When ready for use, the end use concentration is not to exceed 5,000 ppm 1H-3a,7-Methanoazulen-6-ol, octahydro-3,6,8,8-tetramethyl-,[3R-(3.α,3a.β,6.α,7.β,8aα)]77-53-2When ready for use, the end-use concentration is not to exceed 100 ppm. 2-methoxy-4-propylphenol2785-87-7When ready for use, the end-use concentration is not to exceed 100 ppm 4-Methoxy-2-methyl-2-butanethiol94087-83-9When ready for use, the end-use concentration is not to exceed 100 ppm 2-Methoxy-4-methylphenol93-51-6When ready for use, the end-use concentration is not to exceed 100 ppm 4-(p-Methoxyphenyl)-2-butanone104-20-1When ready for use, the end-use concentration is not to exceed 100 ppm 2-Methoxy-4-vinylphenol7786-61-0When ready for use, the end-use concentration is not to exceed 100 ppm Methylene blue61-73-4When ready for use, the end-use concentration is not to exceed 0.4 ppm Methyl-α-ionone127-42-4When ready for use, the end-use concentration is not to exceed 100 ppm 4′-methylacetophenone122-00-9When ready for use, the end-use concentration is not to exceed 100 ppm Methyl anthranilate134-20-3When ready for use, the end-use concentration is not to exceed 100 ppm alpha-methylbenzyl alcohol98-85-1When ready for use, the end-use concentration is not to exceed 100 ppm methyl benzoate93-58-3When ready for use, the end-use concentration is not to exceed 100 ppm 3-Methyl-2-butenyl acetate1191-16-8When ready for use, the end-use concentration is not to exceed 100 ppm alpha-methylcinnamaldehyde101-39-3When ready for use, the end-use concentration is not to exceed 100 ppm methyl cinnamate103-26-4When ready for use, the end-use concentration is not to exceed 100 ppm 3-Methylcrotonic acid541-47-9When ready for use, the end-use concentration is not to exceed 100 ppm Methyl 3,7-dimethyl-6-octenoate2270-60-2When ready for use, the end-use concentration is not to exceed 100 ppm Methyl heptine carbonate111-12-6When ready for use, the end-use concentration is not to exceed 100 ppm Methyl hexanoate106-70-7When ready for use, the end-use concentration is not to exceed 100 ppm Methyl linolenate301-00-8When ready for use, the end-use concentration is not to exceed 100 ppm Methyl 2-methylbutyrate868-57-5When ready for use, the end-use concentration is not to exceed 100 ppm 2-Methyl-3-(p-isopropylphenyl)propionaldehyde103-95-7When ready for use, the end-use concentration is not to exceed 100 ppm Methyl N-acetylanthranilate2719-08-6When ready for use, the end-use concentration is not to exceed 100 ppm Methyl anisate121-98-2When ready for use, the end-use concentration is not to exceed 100 ppm Methyl N-methylanthranilate85-91-6When ready for use, the end-use concentration is not to exceed 100 ppm Methyl 2-nonenoate111-79-5When ready for use, the end-use concentration is not to exceed 100 ppm Methyl 2-nonynoate111-80-8When ready for use, the end-use concentration is not to exceed 100 ppm Methyl 3-nonenoate13481-87-3When ready for use, the end-use concentration is not to exceed 100 ppm 2-Methyl-4-phenyl-2-butanol103-05-9When ready for use, the end-use concentration is not to exceed 100 ppm p-Methylanisole104-93-8When ready for use, the end-use concentration is not to exceed 100 ppm Methylbenzyl acetate (mixed o,m,p)360676-70-1; 2216-45-7; 17373-93-2When ready for use, the end-use concentration is not to exceed 100 ppm α-Methylbenzyl propionate120-45-6When ready for use, the end-use concentration is not to exceed 100 ppm 3-Methyl-2-butenyl benzoate5205-11-8When ready for use, the end-use concentration is not to exceed 100 ppm 3-Methylindole83-34-1When ready for use, the end-use concentration is not to exceed 100 ppm Methyl-α-ionone127-42-4When ready for use, the end-use concentration is not to exceed 100 ppm Methyl-β-ionone127-43-5When ready for use, the end-use concentration is not to exceed 100 ppm Methyl o-methoxybenzoate606-45-1When ready for use, the end-use concentration is not to exceed 100 ppm Methyl 3-methylthiopropionate13532-18-8When ready for use, the end-use concentration is not to exceed 100 ppm 2-Methyloctanal7786-29-0When ready for use, the end-use concentration is not to exceed 100 ppm Methyl octanoate111-11-5When ready for use, the end-use concentration is not to exceed 100 ppm 2-Methylpent-2-en-1-oic acid3142-72-1When ready for use, the end-use concentration is not to exceed 100 ppm β-Methylphenethyl alcohol1123-85-9When ready for use, the end-use concentration is not to exceed 100 ppm Methyl phenylacetate101-41-7When ready for use, the end-use concentration is not to exceed 100 ppm 2-Methyl-4-phenyl-2-butyl acetate103-07-1When ready for use, the end-use concentration is not to exceed 100 ppm Methyl n-propyl ketone107-87-9When ready for use, the end-use concentration is not to exceed 100 ppm methyl salicylate119-36-8When ready for use, the end-use concentration is not to exceed 100 ppm Methyl sulfide75-18-3When ready for use, the end-use concentration is not to exceed 100 ppm Methyl tetradecanoate124-10-7When ready for use, the end-use concentration is not to exceed 100 ppm 2-Methyl-trans-2-butenoic acid80-59-1When ready for use, the end-use concentration is not to exceed 100 ppm Methyl undec-10-enoate111-81-9When ready for use, the end-use concentration is not to exceed 100 ppm 2-Methylundecanal110-41-8When ready for use, the end-use concentration is not to exceed 100 ppm 2-Methyl-1,3-propanediol2163-42-0None Musk ambrette123-69-3When ready for use, the end-use concentration is not to exceed 100 ppm Myristaldehyde124-25-4When ready for use, the end-use concentration is not to exceed 100 ppm Myristic acid544-63-8When ready for use, the end-use concentration is not to exceed 100 ppm Nerolidiol142-50-7When ready for use, the end-use concentration is not to exceed 100 ppm Neroli bigarde oil (Citrus aurantium L.)8016-38-4When ready for use, the end-use concentration is not to exceed 100 ppm Nerolidol (isomer unspecified)7212-44-4When ready for use, the end-use concentration is not to exceed 100 ppm Neryl acetate141-12-8When ready for use, the end-use concentration is not to exceed 100 ppm Neryl formate2142-94-1When ready for use, the end-use concentration is not to exceed 100 ppm Nitric acid7697-37-2When ready for use, the end-use concentration is not to exceed 1,000 ppm Nona-2-trans-6-cis-dienal557-48-2When ready for use, the end-use concentration is not to exceed 100 ppm2,6-Nonadien-1-ol7786-44-9When ready for use, the end-use concentration is not to exceed 100 ppm 2,6-Nonadienal diethyl acetal67674-36-6When ready for use, the end-use concentration is not to exceed 100 ppm 1,3-Nonanediol acetate (mixed esters)1322-17-4When ready for use, the end-use concentration is not to exceed 100 ppm γ-Nonalactone104-61-0When ready for use, the end-use concentration is not to exceed 100 ppm. Nonanal124-19-6When ready for use, the end-use concentration is not to exceed 100 ppm Nonanoic acid112-05-0When ready for use, the end-use concentration is not to exceed 100 ppm 6-nonenal, (6Z)-2277-19-2When ready for use, the end-use concentration is not to exceed 100 ppm 2-Nonenal2463-53-8When ready for use, the end-use concentration is not to exceed 100 ppm. cis-6-nonen-1-ol35854-86-5When ready for use, the end-use concentration is not to exceed 100 ppm Nonyl acetate143-13-5When ready for use, the end-use concentration is not to exceed 100 ppm Nonyl alcohol143-08-8When ready for use, the end-use concentration is not to exceed 100 ppm α-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene) average poly(oxyethylene) content 11 moles)NoneNone Octadecanoic acid57-11-4When ready for use, the end-use concentration is not to exceed 100 ppm Octadecanoic acid, calcium salt1592-23-0None 1-octadecanol112-92-5 9-Octadecenoic acid (9Z)-, sulfonated, oxidized1315321-93-7When ready for use, the end-use concentration is not to exceed 250 ppm 9-Octadecenoic acid (9Z)-, sulfonated, oxidized, potassium salts1315321-94-8When ready for use, the end-use concentration is not to exceed 250 ppm 9-Octadecenoic acid (9Z)-, sulfonated, oxidized, sodium salts1315321-95-9When ready for use, the end-use concentration is not to exceed 250 ppm 2,6-Octadien-1-ol, 3,7-dimethyl-,(Z)-106-25-2When ready for use, the end-use concentration is not to exceed 100 ppm γ-Octalactone104-50-7When ready for use, the end-use concentration is not to exceed 100 ppm δ-Octalactone698-76-0When ready for use, the end-use concentration is not to exceed 100 ppm Octanal124-13-0When ready for use, the end-use concentration is not to exceed 100 ppm octanal dimethyl acetal10022-28-3When ready for use, the end-use concentration is not to exceed 100 ppm 1-Octanesulfonic acid, sodium salt5324-84-5When ready for use, the end-use concentration is not to exceed 46 ppm Octanoic acid124-07-2When ready for use, the end-use concentration is not to exceed 52 ppm Octanoic acid124-07-2When ready for use, the end-use concentration is not to exceed 100 ppm 1-Octanol111-87-5When ready for use, the end-use concentration is not to exceed 100 ppm 2,5,7-Octatrien-1-ol, 2,6-dimethyl0, 1-acetate197098-61-6When ready for use, the end-use concentration is not to exceed 100 ppm 5-Octen-1-ol, (5Z)-64275-73-6When ready for use, the end-use concentration is not to exceed 100 ppm 1-Octen-3-yl acetate2442-10-6When ready for use, the end-use concentration is not to exceed 100 ppm Oil of Bergamot8007-75-8When ready for use, the end-use concentration is not to exceed 100 ppm Oil of camphor8008-51-3When ready for use, the end-use concentration is not to exceed 100 ppm Oil of citronella8000-29-1When ready for use, the end-use concentration is not to exceed 100 ppm Oil of orange8008-57-9When ready for use, the end-use concentration is not to exceed 100 ppm Oils, clove8000-34-8When ready for use, the end-use concentration is not to exceed 100 ppm Oils, Fir8021-29-2When ready for use, the end-use concentration is not to exceed 100 ppm Oils, geranium8000-46-2When ready for use, the end-use concentration is not to exceed 100 ppm Oils, ginger8007-08-7When ready for use, the end-use concentration is not to exceed 100 ppm Oils, grapefruit8016-20-4When ready for use, the end-use concentration is not to exceed 100 ppm Oils, lavender8000-28-0When ready for use, the end-use concentration is not to exceed 100 ppm Oils, lemon, terpene-free68648-39-5When ready for use, the end-use concentration is not to exceed 100 ppm Oil of lemon8008-56-8When ready for use, the end-use concentration is not to exceed 100 ppm Oil of lemongrass8007-02-1When ready for use, the end-use concentration is not to exceed 100 ppm Oils, lime8008-26-2When ready for use, the end-use concentration is not to exceed 100 ppm Oils, mimosa8031-03-6When ready for use, the end-use concentration is not to exceed 100 ppm Oils, orange, sweet, terpene-free68606-94-0When ready for use, the end-use concentration is not to exceed 100 ppm Oils, palmarosa8014-19-5When ready for use, the end-use concentration is not to exceed 100 ppm Oils, peppermint8006-90-4When ready for use, the end-use concentration is not to exceed 100 ppm Oils, spruce8008-80-8When ready for use, the end-use concentration is not to exceed 100 ppm Oils, thyme8007-46-3When ready for use, the end-use concentration is not to exceed 100 ppm Oleic acid112-80-1When ready for use, the end-use concentration is not to exceed 100 ppm Oleic acid, ethyl ester111-62-6When ready for use, the end-use concentration is not to exceed 100 ppm Oleyl alcohol143-28-2When ready for use, the end-use concentration is not to exceed 100 ppm Olibanum oil (Boswellia spp.)8016-36-2When ready for use, the end-use concentration is not to exceed 100 ppm Orange flower water absolute8030-28-2When ready for use, the end-use concentration is not to exceed 100 ppm Orris absolute (Iris pallida)8002-73-1When ready for use, the end-use concentration is not to exceed 100 ppm Ortho-benzyl-para-chlorophenol120-32-1When ready for use, the end-use concentration is not to exceed 2080 ppm Oxacycloheptadec-10-ene-2-one28645-51-4When ready for use, the end-use concentration is not to exceed 100 ppm Oxirane, methyl-, polymer with oxirane, minimum molecular weight (in amu), 19009003-11-6None Palmitic acid57-10-3When ready for use, the end-use concentration is not to exceed 100 ppm Paraffin waxes and hydrocarbon waxes; carboxypolymethylene resin; and paraffin waxes and hydrocarbon, oxidized, lithium salts8002-74-2; 68153-22-0; 68649-48-9 ω-Pentadecalactone106-02-5When ready for use, the end-use concentration is not to exceed 100 ppm. 1-pentanol71-41-0When ready for use, the end-use concentration is not to exceed 100 ppm Pepper, black, oil (Piper nigrum L.)8006-82-4When ready for use, the end-use concentration is not to exceed 100 ppm peppermint (Mentha piperita) ext.84082-70-2When ready for use, the end-use concentration is not to exceed 100 ppm Peroxyacetic acid79-21-0When ready for use, the end-use concentration is not to exceed 58 ppm Peroxyoctanoic acid33734-57-5When ready for use, the end-use concentration is not to exceed 52 ppm Petitgrain bigarade oil8014-17-3When ready for use, the end-use concentration is not to exceed 100 ppm Petitgrain Paraguay oil8014-17-3When ready for use, the end-use concentration is not to exceed 100 ppm α-Phellandrene99-83-2When ready for use, the end-use concentration is not to exceed 100 ppm phenethyl acetate103-45-7When ready for use, the end-use concentration is not to exceed 100 ppm Phenethyl butyrate103-52-6When ready for use, the end-use concentration is not to exceed 100 ppm Phenethyl cinnamate103-53-7When ready for use, the end-use concentration is not to exceed 100 ppm Phenethyl formate104-62-1When ready for use, the end-use concentration is not to exceed 100 ppm Phenethyl hexanoate6290-37-5When ready for use, the end-use concentration is not to exceed 100 ppm Phenethyl propionate122-70-3When ready for use, the end-use concentration is not to exceed 100 ppm Phenethyl salicylate87-22-9When ready for use, the end-use concentration is not to exceed 100 ppm Phenethyl tiglate55719-85-2When ready for use, the end-use concentration is not to exceed 100 ppm Phenol, 2-methoxy-4-(2-propenyl)-97-53-0When ready for use, the end-use concentration is not to exceed 100 ppm Phenol, 2,4,6-trimethyl-527-60-6When ready for use, the end-use concentration is not to exceed 100 ppm phenyl ethyl alcohol60-12-8When ready for use, the end-use concentration is not to exceed 100 ppm phenethyl isobutyrate103-48-0When ready for use, the end-use concentration is not to exceed 100 ppm phenethyl phenylacetate102-20-5When ready for use, the end-use concentration is not to exceed 100 ppm phenylacetaldehyde dimethyl acetal101-48-4When ready for use, the end-use concentration is not to exceed 100 ppm Phenylacetaldehyde glyceryl acetal29895-73-6When ready for use, the end-use concentration is not to exceed 100 ppm Phenylacetic acid103-82-2When ready for use, the end-use concentration is not to exceed 100 ppm 2-phenylethyl 2-methylbutyrate24817-51-4When ready for use, the end-use concentration is not to exceed 100 ppm 3-Phenylpropionaldehyde104-53-0When ready for use, the end-use concentration is not to exceed 100 ppm 3-Phenylpropionic acid501-52-0When ready for use, the end-use concentration is not to exceed 100 ppm 3-Phenylpropyl acetate122-72-5When ready for use, the end-use concentration is not to exceed 100 ppm 3-Phenylpropyl cinnamate122-68-9When ready for use, the end-use concentration is not to exceed 100 ppm 3-phenyl-1-propanol122-97-4When ready for use, the end-use concentration is not to exceed 100 ppm 2-Phenylpropionaldehyde93-53-8When ready for use, the end-use concentration is not to exceed 100 ppm 2-Phenylpropionaldehyde dimethyl acetal90-87-9When ready for use, the end-use concentration is not to exceed 100 ppm Phosphonic acid, (1-hydroxyethylidene)bis-2809-21-4When ready for use, the end-use concentration is not to exceed 14 ppm Phosphoric acid7664-38-2 Phosphoric acid, trisodium salt7601-54-9When ready for use, the end-use concentration is not to exceed 5916 ppm Pine needle oil8000-26-8When ready for use, the end-use concentration is not to exceed 100 ppm Pine scotch oil (Pinus sylvestris L.)8023-99-2When ready for use, the end-use concentration is not to exceed 100 ppm α-Pinene80-56-8When ready for use, the end-use concentration is not to exceed 100 ppm Polyammonium bisulfate10043-02-4When ready for use, the end-use concentration is not to exceed 250 ppm Potassium 2-benzyl-4-chlorophenate35471-49-9When ready for use, the end-use concentration is not to exceed 2080 ppm Potassium bromide7758-02-3When ready for use, the end-use concentration is not to exceed 46 ppm total available halogen Potassium iodide7681-11-0When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine 1,3-Propanediol504-63-2None propanoic acid, 2-methyl-, 4-formyl-2-methoxyphenyl ester20665-85-4When ready for use, the end-use concentration is not to exceed 100 ppm Propanoic acid79-09-4When ready for use, the end-use concentration is not to exceed 100 ppm Propenylguaethol94-86-0When ready for use, the end-use concentration is not to exceed 100 ppm Propionic acid79-09-4When ready for use, the end-use concentration is not to exceed 100 ppm Propyl phenethyl acetal7493-57-4When ready for use, the end-use concentration is not to exceed 100 ppm Propylene glycol57-55-6None α-Propylphenethyl alcohol705-73-7When ready for use, the end-use concentration is not to exceed 100 ppm o-Propylphenol644-35-9When ready for use, the end-use concentration is not to exceed 100 ppm p-Propylphenol645-56-7When ready for use, the end-use concentration is not to exceed 100 ppm 2,6-Pyridinedicarboxylic acid499-83-2When ready for use, the end-use concentration is not to exceed 2 ppm Pyruvic acid127-17-3When ready for use, the end-use concentration is not to exceed 100 ppm Quaternary ammonium compounds, alkyl (C12-C18) benzyldimethyl, chlorides8001-54-5When ready for use, the end-use concentration of all quaternary chemicals in the solution is not to exceed 200 ppm of active quaternary compound Quaternary ammonium compounds: n-alkyl (C12-18) dimethyl benzyl ammonium chloride68424-85-1When ready for use, the end-use concentration of all quaternary chemicals in solution is not to exceed 400 ppm of active quaternary compound Quaternary Ammonium Compounds: n-alkyl (C 12-14) dimethyl ethylbenzyl ammonium chloride, average molecular weight (in amu), 377 to 38485409-23-0When ready for use, the end-use concentration of all quaternary chemicals in solution is not to exceed 400 ppm of active quaternary compound. Quaternary ammonium compounds n-alkyl (C12-C18) dimethyl ethylbenzyl ammonium chloride average molecular weight (in amu) 384NoneWhen ready for use, the end-use concentration of all quaternary chemicals in the solution is not to exceed 200 ppm of active quaternary compound Quaternary ammonium compounds, Di-n-Alkyl (C8-10) dimethyl ammonium chloride, average molecular weight (in amu) 332 to 361NoneWhen ready for use, the end-use concentration of these specific in quaternary ammonium compounds is not to exceed 240 ppm of active quaternary ammonium compound; the end-use concentration of all quaternary chemicals in the solution is not to exceed 400 ppm of active quaternary compound Quaternary ammonium compounds, didecyl dimethyl ammonium carbonate/didecyl dimethyl ammonium bicarbonate148788-55-0/148812-654-1When ready for use, the end-use concentration of these specific ammonium compounds is not to exceed 400 ppm of active quaternary ammonium compound Rose absolute (Rosa spp.)8007-01-0When ready for use, the end-use concentration is not to exceed 100 ppm Salicylaldehyde90-02-8When ready for use, the end-use concentration is not to exceed 100 ppm Sandalwood yellow oil (Santalum album L.)8006-87-9When ready for use, the end-use concentration is not to exceed 100 ppm Santalol11031-45-1When ready for use, the end-use concentration is not to exceed 100 ppm cis-α-Santalol115-71-9When ready for use, the end-use concentration is not to exceed 100 ppm cis-β-Santalol77-42-9When ready for use, the end-use concentration is not to exceed 100 ppm Schinus molle oil (Schinus molle L.)68917-52-2When ready for use, the end-use concentration is not to exceed 100 ppm Sclareol515-03-7When ready for use, the end-use concentration is not to exceed 100 ppm Silver ions resulting from the use of electrolytically-generated silver ions stabilized in citric acid as silver dihydrogen citrate (does not include metallic silver)14701-21-4When ready for use, the end-use concentration of silver ions is not to exceed 50 ppm of active silver Sodium 2-benzyl-4-chlorophenate3184-65-4When ready for use, the end-use concentration is not to exceed 2080 ppm Sodium bisulfate7681-38-1When ready for use, the end-use concentration is not to exceed 2,000 ppm Sodium dioctyl sulfosuccinate 577-11-7None Sodium lauroyl sarcosinate137-16-6When ready for use, the end-use concentration is not to exceed 10,000 ppm Sorbitan, mono-9-octadecenoate, poly(oxy-1,2-ethanediyl) derivs., (Z)-9005-65-6None Spike lavender oil (Lavandula spp.)8016-78-2When ready for use, the end-use concentration is not to exceed 100 ppm Stearic acid.57-11-4When ready for use, the end-use concentration is not to exceed 100 ppm Storax (Liquidambar spp.)8046-19-3When ready for use, the end-use concentration is not to exceed 100 ppm Sulfuric acid7664-93-9Food-contact surfaces in public eating places, dairy-processing equipment, and food-processing equipment and utensils in antimicrobial formulations. Not to exceed 600 ppm Sulfuric acid monododecyl ester, sodium salt (sodium lauryl sulfate)151-21-3When ready for use, the end-use concentration is not to exceed 350 ppm Tagetes oil (Tagetes erecta L.)8016-84-0When ready for use, the end-use concentration is not to exceed 100 ppm Tall oil fatty acid (CAS Reg. No. 61790-12-3)Solvent/carrier Tangerine oil (Citrus reticulata blanco)8008-31-9When ready for use, the end-use concentration is not to exceed 100 ppm Tartaric acid87-69-4When ready for use, the end-use concentration is not to exceed 100 ppm DL-Tartaric acid133-37-9When ready for use, the end-use concentration is not to exceed 100 ppm α-Terpinene99-86-5When ready for use, the end-use concentration is not to exceed 100 ppm γ-Terpinene99-85-4When ready for use, the end-use concentration is not to exceed 100 ppm α-Terpineol98-55-5When ready for use, the end-use concentration is not to exceed 100 ppm Terpinyl acetate (isomer mixture)8007-35-0When ready for use, the end-use concentration is not to exceed 100 ppm1-tetradecanol112-72-1 α-Terpinyl propionate80-27-3When ready for use, the end-use concentration is not to exceed 100 ppm Tetraacetylethylenediamine (TAED)10543-57-4None Tetradecanoic acid, ethyl ester124-06-1When ready for use, the end-use concentration is not to exceed 100 ppm. Tetradecanoic acid, 1-methylethyl ester110-27-0When ready for use, the end-use concentration is not to exceed 100 ppm Tetrahydrogeranial5988-91-0When ready for use, the end-use concentration is not to exceed 100 ppm Tetrahydrolinalool78-69-3When ready for use, the end-use concentration is not to exceed 100 ppm Thiogeraniol39067-80-6When ready for use, the end-use concentration is not to exceed 100 ppm thymol (8CA)89-83-8When ready for use, the end-use concentration is not to exceed 100 ppm Thyme (Thymus Vulgaris) Oil84929-51-1When ready for use, the end-use concentration is not to exceed 100 ppm Tolu, balsam, gum (Myroxylon spp.)9000-64-0When ready for use, the end-use concentration is not to exceed 100 ppm p-Tolylacetaldehyde104-09-6When ready for use, the end-use concentration is not to exceed 100 ppm p-Tolyl acetate140-39-6When ready for use, the end-use concentration is not to exceed 100 ppm p-Tolyl isobutyrate103-93-5When ready for use, the end-use concentration is not to exceed 100 ppm p-Tolyl 3-methylbutyrate55066-56-3When ready for use, the end-use concentration is not to exceed 100 ppm p-Tolyl octanoate59558-23-5When ready for use, the end-use concentration is not to exceed 100 ppm p-Tolyl phenylacetate101-94-0When ready for use, the end-use concentration is not to exceed 100 ppm 2-(p-Tolyl)propionaldehyde99-72-9When ready for use, the end-use concentration is not to exceed 100 ppm Trans-1,3,3,3-tetrafluoroprop-1-ene29118-24-9None 1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-, sodium salt2893-78-9When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine 2-Tridecanal7774-82-5When ready for use, the end-use concentration is not to exceed 100 ppm triethyl citrate77-93-0When ready for use, the end-use concentration is not to exceed 100 ppm Triethylene glycol112-27-6None p-α,α-Trimethylbenzyl alcohol1197-01-9When ready for use, the end-use concentration is not to exceed 100 ppm 2,6,6-Trimethyl-1-cyclohexen-1-acetaldehyde472-66-2When ready for use, the end-use concentration is not to exceed 100 ppm 2,6,6-Trimethyl-1&2-cyclohexen-1-carboxaldehyde432-25-7When ready for use, the end-use concentration is not to exceed 100 ppm 1,3,3-trimethyl-2-norbornanyl acetate13851-11-1When ready for use, the end-use concentration is not to exceed 100 ppm 3,3,5-Trimethylcyclohexanol116-02-9When ready for use, the end-use concentration is not to exceed 100 ppm (Z)-β-1-(2,6,6-Trimethyl-1-cyclohexen-1-yl)-2-buten-1-one; (2E)-1-(2,6,6-Trimethyl-1-cyclohexen-1-yl)-2-buten-1-one35044-68-9; 23726-92-3; 23726-91-2When ready for use, the end-use concentration is not to exceed 100 ppm 2,3,6-Trimethylphenol2416-94-6When ready for use, the end-use concentration is not to exceed 100 ppm 4,7,7-Trimethyl-6-thiabicyclo[3.2.1]octane68398-18-5When ready for use, the end-use concentration is not to exceed 100 ppm . delta-1-(2,6,6-trimethyl-3-cyclohexen-1-yl)-2-buten-1-one57378-68-4When ready for use, the end-use concentration is not to exceed 100 ppm3,5,5-Trimethylhexanal5435-64-3 When ready for use, the end-use concentration is not to exceed 100 ppm Turpentine, oil8006-64-2When ready for use, the end-use concentration is not to exceed 100 ppm γ-Undecalactone104-67-6When ready for use, the end-use concentration is not to exceed 100 ppm. Undecanal112-44-7When ready for use, the end-use concentration is not to exceed 100 ppm 1-undecanol112-42-5Carrier/Adjuvant and Coating Agent/Binder. 1,3,5-Undecatriene16356-11-9When ready for use, the end-use concentration is not to exceed 100 ppm 9-Undecenal143-14-6When ready for use, the end-use concentration is not to exceed 100 ppm 10-Undecenal112-45-8When ready for use, the end-use concentration is not to exceed 100 ppm 10-Undecenoic acid112-38-9When ready for use, the end-use concentration is not to exceed 100 ppm 10-Undecenoic acid, ethyl ester692-86-4When ready for use, the end-use concentration is not to exceed 100 ppm 10-undecen-1-yl acetate112-19-6When ready for use, the end-use concentration is not to exceed 100 ppm. Undecyl alcohol112-42-5When ready for use, the end-use concentration is not to exceed 100 ppm Valencene4630-07-3When ready for use, the end-use concentration is not to exceed 100 ppm Valeraldehyde110-62-3When ready for use, the end-use concentration is not to exceed 100 ppm Valeric acid109-52-4When ready for use, the end-use concentration is not to exceed 100 ppm γ-Valerolactone108-29-2When ready for use, the end-use concentration is not to exceed 100 ppm Vanilla (Vanilla spp.)8024-06-4When ready for use, the end-use concentration is not to exceed 100 ppm Vanilla extract (Vanilla spp.)84650-63-5When ready for use, the end-use concentration is not to exceed 100 ppm Vanilla tahitensis, ext.94167-14-3When ready for use, the end-use concentration is not to exceed 100 ppm Vanillin121-33-5When ready for use, the end-use concentration is not to exceed 100 ppm veratraldehyde120-14-9When ready for use, the end-use concentration is not to exceed 100 ppm Violet leaves absolute (Viola odorata L.)90147-36-7When ready for use, the end-use concentration is not to exceed 100 ppm Waxes and waxy substances, rice bran, oxidized1883583-80-9None Wintergreen oil68917-75-9When ready for use, the end-use concentration is not to exceed 100 ppm Xylenesulfonic acid, sodium salt1300-72-7When ready for use, the end-use concentration is not to exceed 500 ppm 2,5-Xylenol95-87-4When ready for use, the end-use concentration is not to exceed 100 ppm 2,6-Xylenol576-26-1When ready for use, the end-use concentration is not to exceed 100 ppm 3,4-Xylenol95-65-8When ready for use, the end-use concentration is not to exceed 100 ppm Ylang-ylang oils8006-81-3When ready for use, the end-use concentration is not to exceed 100 ppm Zingerone122-48-5When ready for use, the end-use concentration is not to exceed 100 ppm

(b) The following chemical substances when used as ingredients in an antimicrobial pesticide formulation may be applied to: Dairy processing equipment, and food-processing equipment and utensils.

Pesticide Chemical CAS Reg. No. Limits Acetic acid64-19-7When ready for use, the end-use concentration is not to exceed 1200 ppm Acetic acid, chloro-, sodium salt, reaction products with 4,5-dihydro-2-undecyl-1H-imidazole-1-ethanol and sodium hydroxide68608-66-2When ready for use, the end-use concentration is not to exceed 42 ppm chloroacetic acid Butanedioic acid, octenyl-28805-58-5When ready for use, the end-use concentration is not to exceed 156 ppm Butoxy monoether of mixed (ethylene-propylene) polyalkylene glycol, minimum average molecular weight (in amu), 2400NoneNone Calcium chloride10043-52-4When ready for use, the end-use concentration is not to exceed 17 ppm n-Carboxylic acids (C6-C12), consisting of a mixture of not less than 56% octanoic acid and not less than 40% decanoic acidNoneWhen ready for use, the end-use concentration is not to exceed 39 ppm Decanoic acid334-48-5When ready for use, the end-use concentration is not to exceed 90 ppm Ethanesulfonic acid, 2-[cyclohexyl (1-oxohexadecyl) amino]-, sodium salt132-43-4When ready for use, the end-use concentration is not to exceed 237 ppm Ethylenediaminetetraacetic acid (EDTA), disodium salt139-33-3When ready for use, the end-use concentration is not to exceed 1400 ppm FD&C Yellow No. 5 (Tartrazine) (conforming to 21 CFR 74.705)1934-21-0None C1-C4 linear and branched chain alkyl d-glucitol dianhydro alkyl ethers cluster5306-85-4; 30915-81-2; 107644-13-3; 103594-41-8; 103594-42-9When ready for use, the end-use concentration is not to exceed 1,000 ppm. D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(1-methylpropyl)-,None D-glucitol, 1,4:3,6-dianhydro-2,5-di-O-(2-methylpropyl)-, (CAS Reg. No. not assigned)None D-Gluconic acid, monosodium salt527-07-1When ready for use, the end-use concentration is not to exceed 760 ppm Hydriodic acid10034-85-2When ready for use, the total end-use concentration of all iodide-producing chemicals is not to exceed 25 ppm of titratable iodine Hydrogen peroxide7722-84-1When ready for use, the end-use concentration is not to exceed 465 ppm Iodine7553-56-2When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine Nonanoic acid112-05-0When ready for use, the end-use concentration is not to exceed 90 ppm 1-Octanamine, N,N-dimethyl-7378-99-6When ready for use, the end-use concentration is not to exceed 113 ppm 1,2-Octanedisulfonic acid113669-58-2When ready for use, the end-use concentration is not to exceed 102 ppm 1-Octanesulfonic acid3944-72-7When ready for use, the end-use concentration is not to exceed 172 ppm 1-Octanesulfonic acid, sodium salt5324-84-5When ready for use, the end-use concentration is not to exceed 297 ppm 1-Octanesulfonic acid, 2-sulfino-113652-56-5When ready for use, the end-use concentration is not to exceed 102 ppm Octanoic acid124-07-2When ready for use, the end-use concentration is not to exceed 176 ppm Oxychloro species (including chlorine dioxide) generated by acidification of an aqueous solution of sodium chloriteNoneWhen ready for use, the end-use concentration is not to exceed 200 ppm of chlorine dioxide as determined by the method titled, Iodometric Method for the Determination of Available Chlorine Dioxide (50-250 ppm available chlorine dioxide) Peroxyacetic acid79-21-0When ready for use, the end-use concentration is not to exceed 315 ppm Peroxyoctanoic acid33734-57-5When ready for use, the end-use concentration is not to exceed 122 ppm Phosphonic acid, (1-hydroxyethylidene)bis-2809-21-4When ready for use, the end-use concentration is not to exceed 34 ppm Phosphoric acid7664-38-2None Phosphoric acid, monosodium salt7558-80-7When ready for use, the end-use concentration is not to exceed 350 ppm Potassium iodide7681-11-0When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine Propanoic acid79-09-4When ready for use, the end-use concentration is not to exceed 297 ppm Sulfuric acid monododecyl ester, sodium salt (sodium lauryl sulfate)151-21-3When ready for use, the end-use concentration is not to exceed 350 ppm

(c) The following chemical substances when used as ingredients in an antimicrobial pesticide formulation may be applied to: Food-processing equipment and utensils.

Pesticide Chemical CAS Reg. No. Limits Acetic acid64-19-7When ready for use, the end-use concentration is not to exceed 1,200 ppm Acetic acid, chloro-, sodium salt, reaction products with 4,5-dihydro-2-undecyl-1H-imidazole-1-ethanol and sodium hydroxide68608-66-2When ready for use, the end-use concentration is not to exceed 42 ppm chloroacetic acid Ammonium chloride12125-02-9When ready for use, the end-use concentration is not to exceed 48 ppm [1,1′-Biphenyl]-2-ol90-43-7When ready for use, the end-use concentration is not to exceed 400 ppm Boric acid, sodium salt7775-19-1None Butanedioic acid, octenyl-28805-58-5When ready for use, the end-use concentration is not to exceed 156 ppm Butanedioic acid, sulfo-, 1,4-dioctyl ester, sodium salt1639-66-3None Butoxy monoether of mixed (ethylene-propylene) polyalkylene glycol, cloudpoint of 90 - 100 oC in 0.5 aqueous solution, average molecular weight (in amu), 3300NoneNone Butoxy monoether of mixed (ethylene-propylene) polyalkylene glycol, minimum average molecular weight (in amu), 2400NoneNone Calcium chloride10043-52-4When ready for use, the end-use concentration is not to exceed 17 ppm n-Carboxylic acids (C6-C12), consisting of a mixture of not less than 56% octanoic acid and not less than 40% decanoic acidNoneWhen ready for use, the end-use concentration is not to exceed 39 ppm 3-Cyclohexene-1-methanol,α,α,4-trimethyl-98-55-5None 1-Decanaminium, N-decyl-N, N-dimethyl-, chloride7173-51-5When ready for use, the end-use concentration is not to exceed 200 ppm of active quaternary compound Decanoic acid3347-48-5When ready for use, the end-use concentration is not to exceed 234 ppm Ethanesulfonic acid, 2-[cyclohexyl (1-oxohexadecyl) amino]-, sodium salt132-43-4When ready for use, the end-use concentration is not to exceed 237 ppm Ethanol64-17-5None Ethanol, 2 butoxy-111-76-2None Ethanol, 2-(2-ethoxyethoxy)-111-90-0None Ethylenediaminetetraacetic acid (EDTA), disodium salt139-33-3When ready for use, the end-use concentration is not to exceed 1400 ppm Ethylenediaminetetraacetic acid (EDTA), tetrasodium salt64-02-8None Fatty acids, coco, potassium salts61789-30-8None Fatty acids, tall-oil, sulfonated, sodium salts68309-27-3When ready for use, the end-use concentration is not to exceed 66 ppm FD&C Yellow No. 5 (Tartrazine) (conforming to 21 CFR 74.705)1934-21-0None D-Gluconic acid, monosodium salt527-07-1When ready for use, the end-use concentration is not to exceed 760 ppm Hydriodic acid10034-85-2When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine Hydrogen peroxide7722-84-1When ready for use, the end-use concentration is not to exceed 1100 ppm Hypochlorous acid, calcium salt7778-54-3When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine Hypochlorous acid, lithium salt13840-33-0When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine and 30 ppm lithium Hypochlorous acid, potassium salt7778-66-7When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine Hypochlorous acid, sodium salt7681-52-9When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine Iodine7553-56-2When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine Magnesium oxide1309-48-4None Methylene blue61-73-4When ready for use, the end-use concentration is not to exceed 0.4 ppm Neodecanoic acid26896-20-8When ready for use, the end-use concentration is not to exceed 174 ppm Nonanoic acid112-05-0When ready for use, the end-use concentration is not to exceed 90 ppm α-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene) maximum average molecular weight (in amu), 748NoneNone α-(p-Nonylphenol)-ω-hydroxypoly (oxyethylene) average poly(oxyethylene) content 11 molesNoneNone α-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene) produced by the condensation of 1 mole p-nonylphenol with 9 to 12 moles ethylene oxideNoneNone α-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene), 9 to 13 moles ethylene oxideNoneNone Octadecanoic acid, calcium salt1592-23-0None 9-Octadecenoic acid (9Z)-, sulfonated68988-76-1When ready for use, the end-use concentration is not to exceed 312 ppm 9-Octadecenoic acid (9Z)-sulfonated, sodium salts68443-05-0When ready for use, the end-use concentration is not to exceed 200 ppm 1-Octanamine, N,N-dimethyl-7378-99-6When ready for use, the end-use concentration is not to exceed 113 ppm 1,2-Octanedisulfonic acid113669-58-2When ready for use, the end-use concentration is not to exceed 102 ppm 1-Octanesulfonic acid3944-72-7When ready for use, the end-use concentration is not to exceed 172 ppm 1-Octanesulfonic acid, sodium salt5324-84-5When ready for use, the end-use concentration is not to exceed 312 ppm 1-Octanesulfonic acid, 2-sulfino-113652-56-5When ready for use, the end-use concentration is not to exceed 102 ppm Octanoic acid124-07-2When ready for use, the end-use concentration is not to exceed 234 ppm Oxirane, methyl-, polymer with oxirane, minimum molecular weight (in amu), 19009003-11-6None Oxirane, methyl-, polymer with oxirane, block, average molecular weight (in amu), 1900106392-12-5None Oxirane, methyl-, polymer with oxirane, block, minimum average molecular weight (in amu), 2000NoneNone Oxirane, methyl-, polymer with oxirane, block, 27 to 31 moles of polyoxypropylene, average molecular weight (in amu) 2000NoneNone Oxychloro species (predominantly chlorite, chlorate and chlorine dioxide in an equilibrium mixture) generated either (i) by directly metering a concentrated chlorine dioxide solution prepared just prior to use, into potable water, or (ii) by acidification of an aqueous alkaline solution of oxychloro species (predominately chlorite and chlorate) followed by dilution with potable waterNoneWhen ready for use, the end-use concentration is not to exceed 200 ppm of chlorine dioxide as determined by the method titled, “Iodometric Method for the Determination of Available Chlorine Dioxide (50-250 ppm available chlorine dioxide)” Oxychloro species (including chlorine dioxide) generated by acidification of an aqueous solution of sodium chloriteNoneWhen ready for use, the end-use concentration is not to exceed 200 ppm of chlorine dioxide as determined by the method titled, “Iodometric Method for the Determination of Available Chlorine Dioxide (50-250 ppm available chlorine dioxide)” 2,4-Pentanediol, 2-methyl-107-41-5None Peroxyacetic acid79-21-0When ready for use, the end-use concentration is not to exceed 315 ppm Peroxyoctanoic acid33734-57-5When ready for use, the end-use concentration is not to exceed 122 ppm Phenol, 4-(1,1-dimethylpropyl)-80-46-6When ready for use, the end-use concentration is not to exceed 80 ppm Phosphonic acid, (1-hydroxyethylidene)bis-2809-21-4When ready for use, the end-use concentration is not to exceed 34 ppm Phosphoric acid7664-38-2None Phosphoric acid, monosodium salt7558-80-7When ready for use, the end-use concentration is not to exceed 350 ppm Phosphoric acid, trisodium salt7601-54-9When ready for use, the end-use concentration is not to exceed 5916 ppm Poly(oxy-1,2-ethanediyl), α-[(1,1,3,3-tetramethylbutyl) phenyl]-ω-hydroxy-, produced with one mole of the phenol and 4 to 14 moles ethylene oxideNoneNone Potassium bromide7758-02-3When ready for use, the end-use concentration of all bromide-producing chemicals in the solution is not to exceed 200 ppm total available halogen Potassium iodide7681-11-0When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine Propanoic acid79-09-4When ready for use, the end-use concentration is not to exceed 297 ppm Quaternary ammonium compounds, alkyl (C12-C18) benzyldimethyl, chlorides8001-54-5When ready for use, the end-use concentration of this specific quaternary compound is not to exceed 200 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound Quaternary ammonium compounds, n-alkyl (C12-C14) dimethyl ethylbenzyl ammonium chloride, average molecular weight (in amu), 377 to 384NoneWhen ready for use, the end-use concentration of this specific quaternary compound is not to exceed 200 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound Quaternary ammonium compounds, n-alkyl (C12-C18) dimethyl ethylbenzyl ammonium chloride average molecular weight (in amu) 384NoneWhen ready for use, the end-use concentration of this specific quaternary compound is not to exceed 200 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound Quaternary ammonium compounds, di-n-Alkyl (C8-C10) dimethyl ammonium chloride, average molecular weight (in amu), 332 to 361NoneWhen ready for use, the end-use concentration of this specific quaternary compound is not to exceed 240 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound Sodium-α-alkyl(C12-C15)-ω-hydroxypoly (oxyethylene) sulfate with the poly(oxyethylene) content averaging one moleNoneNone Sodium bromide7647-15-6When ready for use, the end-use concentration of all bromide-producing chemicals in the solution is not to exceed 200 ppm total available halogen Sodium iodide7681-82-5When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine Sulfuric acid monododecyl ester, sodium salt (sodium lauryl sulfate)151-21-3None 1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-2782-57-2When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine 1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-, potassium salt2244-21-5When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine 1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-, sodium salt2893-78-9When r use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine 1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3,5-trichloro-87-90-1When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine 1,3,5-Triazine, N,N′,N″-trichloro-2,4,6-triamino-7673-09-8When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine
[69 FR 23136, Apr. 28, 2004] Editorial Note:For Federal Register citations affecting § 180.940, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and at www.govinfo.gov.

§ 180.950 - Tolerance exemptions for minimal risk active and inert ingredients.

Unless specifically excluded, residues resulting from the use of the following substances as either an inert or an active ingredient in a pesticide chemical formulation, including antimicrobial pesticide chemicals, are exempted from the requirement of a tolerance under FFDCA section 408, if such use is in accordance with good agricultural or manufacturing practices.

(a) Commonly consumed food commodities. Commonly consumed food commodities means foods that are commonly consumed for their nutrient properties. The term commonly consumed food commodities shall only apply to food commodities (whether a raw agricultural commodity or a processed commodity) in the form the commodity is sold or distributed to the public for consumption.

(1) Included within the term commonly consumed food commodities are:

(i) Sugars such as sucrose, lactose, dextrose and fructose, and invert sugar and syrup.

(ii) Spices such as cinnamon, cloves, and red pepper.

(iii) Herbs such as basil, anise, or fenugreek.

(2) Excluded from the term commonly consumed food commodities are:

(i) Any food commodity that is adulterated under 21 U.S.C. 342.

(ii) Both the raw and processed forms of peanuts, tree nuts, milk, soybeans, eggs, fish, crustacea, and wheat.

(iii) Alcoholic beverages.

(iv) Dietary supplements.

(b) Animal feed items. Animal feed items means meat meal and all items derived from field crops that are fed to livestock excluding both the raw and processed forms of peanuts, tree nuts, milk, soybeans, eggs, fish, crustacea, and wheat. Meat meal is an animal feed composed of dried animal fat and protein that has been sterilized. Other than meat meal, the term animal feed item does not extend to any item designed to be fed to animals that contains, to any extent, components of animals. Included within the term animal feed items are:

(1) The hulls and shells of the commodities specified in paragraph (a)(2)(ii) of this section, and cocoa bean.

(2) Bird feed such as canary seed.

(3) Any feed component of a medicated feed meeting the definition of an animal feed item.

(c) Edible fats and oils. Edible fats and oils means all edible (food or feed) fats and oils, derived from either plants or animals, whether or not commonly consumed, including products derived from hydrogenating (food or feed) oils, or liquefying (food or feed) fats.

(1) Included within the term edible fats and oils are oils (such as soybean oil) that are derived from the commodities specified in paragraph (a)(2)(ii) of this section when such oils are highly refined via a solvent extraction procedure.

(2) Excluded from the term edible fats and oils are plant oils used in the pesticide chemical formulation specifically to impart their characteristic fragrance and/or flavoring.

(d) [Reserved]

(e) Specific chemical substances. Residues resulting from the use of the following substances as either an inert or an active ingredient in a pesticide chemical formulation, including antimicrobial pesticide chemicals, are exempted from the requirement of a tolerance under FFDCA section 408, if such use is in accordance with good agricultural or manufacturing practices.

Chemical CAS No. Acetic acid, sodium salt127-09-3 Alpha-cyclodextrin10016-20-3 Amylopectin, acid-hydrolyzed, 1-octenylbutanedioate113894-85-2 Amylopectin, hydrogen 1-octadecenylbutanedioate125109-81-1 Animal glueNone Ascorbic acid (vitamin C)50-81-7 Beeswax8012-89-3 Benzoic acid, sodium salt532-32-1 Beta-cyclodextrin7585-39-9 Carbonic acid, monopotassium salt298-14-6 Carbonic acid, monosodium salt (sodium bicarbonate)144-55-8 Carnauba wax8015-86-9 Carob gum (locust bean gum)9000-40-2 Castor oil8001-79-4 Castor oil, hydrogenated8001-78-3 Cellulose9004-34-6 Cellulose acetate9004-35-7 Cellulose, carboxy methyl ether, sodium salt9004-32-4 Cellulose, 2-hydroxyethyl ether9004-62-0 Cellulose, 2-hydroxypropyl ether9004-64-2 Cellulose, 2-hydroxypropyl methyl ether9004-65-3 Cellulose, methyl ether9004-67-5 Cellulose, mixture with cellulose carboxymethyl ether, sodium salt51395-75-6 Cellulose, pulp65996-61-4 Cellulose, regenerated68442-85-3 Citric acid77-92-9 Citric acid, 2-(acetyloxy)-, tributyl ester77-90-7 Citric acid, calcium salt7693-13-2 Citric acid, calcium salt (2:3)813-94-5 Citric acid, dipotassium salt3609-96-9 Citric acid, disodium salt144-33-2 Citric acid, monohydrate5949-29-1 Citric acid, monopotassium salt866-83-1 Citric acid, monosodium salt18996-35-5 Citric acid, potassium salt7778-49-6 Citric acid, triethyl ester77-93-0 Citric acid, tripotassium salt866-84-2 Citric acid, tripotassium salt, monohydrate6100-05-6 Citric acid, sodium salt994-36-5 Citric acid, trisodium salt68-04-2 Citric acid, trisodium salt, dihydrate6132-04-3 Citric acid, trisodium salt, pentahydrate6858-44-2 Coffee grounds68916-18-7 Dextrins9004-53-9 1,3-Dioxolan-2-one, 4-methyl-(propylene carbonate)108-32-7 Fumaric acid110-17-8 Gamma-cyclodextrin17465-86-0 Gellan gum71010-52-1 D-Glucitol (sorbitol)50-70-4 Glycerol (glycerin) (1,2,3-propanetriol)56-81-5 Guar gum9000-30-0 Humic acid1413-93-6 Humic acid, potassium salt68514-28-3 Humic acid, sodium salt68131-04-4 Lactic acid, n-butyl ester138-22-7 Lactic acid, n-butyl ester, (S)34451-19-9 Lactic acid, ethyl ester97-64-3 Lactic acid, ethyl ester,(S)687-47-8 Lanolin8006-54-0 Lecithins8002-43-5 Lecithins, soya8030-76-0 Licorice Extract68916-91-6 Maltodextrin9050-36-6 PaperNone Potassium chloride7447-40-7 2-Propanol (isopropyl alcohol)67-63-0 Red cabbage color, expressed from edible red cabbage heads via a pressing process using only acidified waterNone Silica, amorphous, fumed (crystalline free)112945-52-5 Silica, amorphous, precipitated and gel7699-41-4 Silica gel63231-67-4 Silica gel, precipitated, crystalline-free112926-00-8 Silica, hydrate10279-57-9 Silica, vitreous60676-86-0 Soap (The water soluble sodium or potassium salts of fatty acids produced by either the saponification of fats and oils, or the neutralization of fatty acid)None Sorbic acid, potassium salt24634-61-5 Soapbark (Quillaja saponin)1393-03-9 Sodium alginate9005-38-3 Sodium chloride7647-14-5 Syrups, hydrolyzed starch, hydrogenated68425-17-2 Ultramarine blue (C.I. Pigment Blue 29)57455-37-5 Urea57-13-6 Vanillin121-33-5 Xanthan gum11138-66-2
[67 FR 36537, May 24, 2002] Editorial Note:For Federal Register citations affecting § 180.950, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and at www.govinfo.gov.

§ 180.960 - Polymers; exemptions from the requirement of a tolerance.

Residues resulting from the use of the following substances, that meet the definition of a polymer and the criteria specified for defining a low-risk polymer in 40 CFR 723.250, as an inert ingredient in a pesticide chemical formulation, including antimicrobial pesticide chemical formulations, are exempted from the requirement of a tolerance under FFDCA section 408, if such use is in accordance with good agricultural or manufacturing practices.

Table 1 to § 180.960

Polymer CAS No. Acetic acid ethenyl ester, polymer with ethane, ethenyltriethoxysilane and sodium ethenesulfonate (1:1); minimum number average molecular weight (in amu), 16,200913187-38-9 Acetic acid ethenyl ester, polymer with ethene and ethenol, minimum number average molecular weight (in amu), 20,00026221-27-2 Acetic acid ethenyl ester, polymer with ethene, N-(hydroxymethyl)-2-propenamide, and 2-propenamide, (AM-E-NMA-VA) minimum number average molecular weight (in amu), 550049603-78-3 Acetic acid ethenyl ester, polymer with ethenol and (α)-2-propenyl-(ω)-hydroxypoly (oxy-1,2-ethanediyl) minimum number average molecular weight (in amu), 15,000137091-12-4 Acetic acid ethenyl ester, polymer with 1-ethenyl-2-pyrrolidinone25086-89-9 Acetic acid ethenyl ester, polymer with oxirane, minimum number average molecular weight (in amu), 17,00025820-49-9 Acetic acid ethenyl ester, polymer with sodium 2-methyl-2-[(1-oxo-2-propen-1-yl)amino]-1-propanesulfonate (1:1), hydrolyzed, minimum number average molecular weight (in amu), 61,000924892-37-5 Acrylamide-Sodium Acrylamidomethylpropanesulfonate Copolymer, minimum number average molecular weight (amu), 1,000,000 daltons.38193-60-1 Acrylic acid-benzyl methacrylate-1-propanesulfonic acid, 2-methyl-2-[(1-oxo-2-propenyl)amino]-, monosodium salt, minimum number average molecular weight (in amu), 15001152297-42-1 Acrylic acid-butyl acrylate-styrene copolymer, minimum number average molecular weight (in amu), 5,20025586-20-3 Acrylic acid, polymerized, and its ethyl and methyl estersNone Acrylic acid-sodium acrylate-sodium-2-methylpropanesulfonate copolymer, minimum average molecular weight (in amu), 4,50097953-25-8 Acrylic acid-stearyl methacrylate copolymer, minimum number average molecular weight (in amu), 2,50027756-15-6 Acrylic acid, styrene, α-methyl styrene copolymer, ammonium salt, minimum number average molecular weight (in amu), 1,25089678-90-0 Acrylic acid terpolymer, partial sodium salt, minimum number average molecular weight (in amu), 2,400151006-66-5 Acrylic polymers composed of one or more of the following monomers: Acrylic acid, butyl acrylate, butyl methacrylate, carboxyethyl acrylate, ethyl acrylate, ethyl methacrylate, hydroxybutyl acrylate, hydroxybutyl methacrylate, hydroxyethyl acrylate, hydroxyethyl methacrylate, hydroxypropyl acrylate, hydroxypropyl methacrylate, isobutyl methacrylate, lauryl methacrylate, methacrylic acid, methyl acrylate, lauryl acrylate, methyl methacrylate and stearyl methacrylate; with none and/or one or more of the following monomers: Acrylamide, diethyl maleate, dioctyl maleate, maleic acid, maleic anhydride, monoethyl maleate, monooctyl maleate, N-methyl acrylamide, N,N-dimethyl acrylamide, N-octylacrylamide, and acrylamidopropyl methyl sulfonic acid; and their corresponding ammonium, isopropylamine, monoethanolamine, potassium, sodium triethylamine, and/or triethanolamine salts; the resulting polymer having a minimum number average molecular weight (in amu), 1,200None Acrylonitrile-butadiene copolymer conforming to 21 CFR 180.22, minimum average molecular weight (in amu), 1,0009003-18-3 Acrylonitrile-styrene-hydroxypropyl methacrylate copolymer, minimum number average molecular weight (in amu), 447,000None C10-23 alkyl group-containing alkali-soluble acrylic emulsion polymer, minimum number average molecular weight (in amu), 29,000 Daltons174127-24-3 Alkoxylated C8-C18 Saturated and Unsaturated Alcohol and Adipic Acid, (AASUAA), minimum number average molecular weight (in amu), 1,300397247-05-1, 227755-70-6, 397247-06-2, 1065234-83-4, and 497157-72-9. α-Alkyl-ω-hydroxypoly (oxypropylene) and/or poly (oxyethylene) polymers where the alkyl chain contains a minimum of six carbons and a minimum number average molecular weight (in amu) 1,1009002-92-0; 9004-95-9; 9004-98-2; 9005-00-9; 9035-85-2; 9038-29-3; 9038-43-1; 9040-05-5; 9043-30-5; 9087-53-0; 25190-05-0; 24938-91-8; 25231-21-4; 251553-55-6; 26183-52-8; 26468-86-0; 26636-39-5; 26636-40-8; 27252-75-1; 27306-79-2; 31726-34-8; 32128-65-7; 34398-01-1; 34398-05-5; 37251-67-5; 37311-00-5; 37311-01-6; 37311-02-7; 37311-04-9; 39587-22-9; 50861-66-0; 52232-09-4; 52292-17-8; 52609-19-5; 57679-21-7; 59112-62-8; 60636-37-5; 60828-78-6; 61702-78-1; 61723-78-2; 61725-89-1; 61791-13-7; 61791-20-6; 61791-28-4; 61804-34-0; 61827-42-7; 61827-84-7; 62648-50-4; 63303-01-5; 63658-45-7; 63793-60-2; 64366-70-7; 64415-24-3; 64415-25-4; 64425-86-1; 65104-72-5; 65150-81-4; 66455-14-9: 66455-15-0; 67254-71-1; 67763-08-0; 68002-96-0; 68002-97-1; 68131-39-5; 68131-40-8; 68154-96-1; 68154-97-2; 68154-98-3; 68155-01-1; 68213-23-0; 68213-24-1; 68238-81-3; 68238-82-4; 68409-58-5; 68409-59-6; 68439-30-5; 68439-45-2; 68439-46-3; 68439-48-5; 68439-49-6; 68439-50-9; 68439-51-0; 68439-53-2; 68439-54-3; 68458-88-8; 68526-94-3; 68526-95-4; 68551-12-2; 68551-13-3; 68551-14-4; 68603-20-3; 68603-25-8; 68920-66-1; 68920-69-4; 68937-66-6; 68951-67-7; 68954-94-9; 68987-81-5; 68991-48-0; 69011-36-5; 69013-18-9; 69013-19-0; 69227-20-9; 69227-21-0; 69227-22-1; 69364-63-2; 70750-27-5; 70879-83-3; 70955-07-6; 71011-10-4; 71060-57-6; 71243-46-4; 72066-65-0; 72108-90-8; 72484-69-6; 72854-13-8; 72905-87-4; 73018-31-2; 73049-34-0; 74432-13-6; 74499-34-6; 78330-19-5; 78330-20-8; 78330-21-9; 78330-23-1; 79771-03-2; 84133-50-6; 85422-93-1; 97043-91-9; 97953-22-5; 102782-43-4; 103331-86-8; 103657-84-7; 103657-85-8; 103818-93-5; 103819-03-0; 106232-83-1; 111905-54-5; 116810-31-2; 116810-32-3; 116810-33-4; 120313-48-6; 120944-68-5; 121617-09-2; 126646-02-4; 126950-62-7; 127036-24-2; 139626-71-4; 152231-44-2; 154518-36-2; 157627-86-6; 157627-88-8; 157707-41-0; 157707-43-2; 159653-49-3; 160875-66-1; 160901-20-2; 160901-09-7; 160901-19-9; 161025-21-4; 161025-22-5; 161133-70-6; 166736-08-9; 169107-21-5; 172588-43-1; 176022-76-7; 196823-11-7; 287935-46-0; 288260-45-7; 303176-75-2; 954108-36-2; 2222805-23-2; 2409830-33-5 Amines, coco alkyl, ethoxylated, compounds with acrylic acid-Bu acrylate-methylstyrene-styrene polymer, ammonium salts; minimum number average molecular weight (in amu), 27001186094-73-4 2H-Azepin-2-one, 1-ethenylhexahydro-, homopolymer25189-83-7 1,3 Benzene dicarboxylic acid, 5-sulfo-, 1,3-dimethyl ester, sodium salt, polymer with 1,3-benzene dicarboxylic acid, 1,4-benzene dicarboxylic acid, dimethyl 1,4-benzene dicarboxylate and 1,2-ethanediol, minimum number average molecular weight (in amu), 2,580212842-88-1 1,3-Benzenedicarboxylic acid, 5-sulfo-, sodium salt (1:1), polymer with 1,3-benzenedicarboxylic acid, 1,4-cyclohexanedimethanol and 2,2′-oxybis[ethanol], minimum number average molecular weight (in amu), 30,40054590-72-6 3,5-Bis(6-isocyanatohexyl)-2H-1,3,5-oxadiazine-2,4,6-(3H,5H)-trione, polymer with diethylenetriamine, minimum number average molecular weight (in amu), 1,000,00087823-33-4 Polymer of one or more diglycidyl ethers of bisphenol A, resorcinol, glycerol, cyclohexanedimethanol, neopentyl glycol, and polyethylene glycol with one or more of the following: Polyoxypropylene diamine, polyoxypropylene triamine, N-aminoethyl-piperazine, trimethyl-1,6-hexanediamine isophorone diamine, N,N-dimethyl-1,3-diaminopropane, nadic methyl anhydride, 1,2-cyclohexane-dicarboxylic anhydride and 1,2,3,6-tetrahydrophthalic anhydride, minimum number average molecular weight (in amu), 400,000None Butadiene-styrene copolymerNone Butanedioic acid, 2-methylene-, homopolymer, sodium salt, minimum number average molecular weight (in amu), 393626099-89-8 Butanedioic acid, 2-methylene-, polymer with 1,3-butadiene, ethenylbenzene and 2-hydroxyethyl 2-propenoate, minimum number average molecular weight (in amu), 10,00036089-06-2 Butanedioic acid, 2-methylene-, polymer with 2,5-furandione, sodium and ammonium salts, hydrogen peroxide-initiated, minimum number average molecular weight (in amu), 2,500-3,000556055-76-6
701908-99-8
Butanedioic acid, 2-methylene-, telomer with sodium phosphinate (1:1), acidified, potassium salt minimum number average molecular weight (in amu), 38001663489-14-2 1,4-Butanediol-methylenebis(4-phenylisocyanate)-poly(tetramethylene glycol) copolymer, minimum molecular weight (in amu) 158,0009018-04-6 Butene, homopolymer9003-29-6 2-butenedioic acid (2Z)-, monobutyl ester, polymer with methoxyethene, sodium salt, minimum number average molecular weight (in amu), 18,200205193-99-3 2-Butenedioic acid (Z)-, polymer with ethenol and ethenyl acetate, sodium salt, minimum number average molecular weight (in amu), 75,000139871-83-3 Butyl acrylate-vinyl acetate-acrylic acid copolymer, minimum number average molecular weight (in amu), 18,00065405-40-5 Carbonic acid, diethyl ester, polymer with α-hydro-ω-hydroxypoly[oxy(methyl-1,2-ethanediyl)] ether with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol (3:1), ester with α-[[[[5-(carboxyamino)-1,3,3-trimethylcyclohexyl]methyl]amino]carbonyl]-ω-methoxypoly(oxy-1,2-ethanediyl), minimum number average molecular weight (in amu), 1,9001147260-65-8 Castor oil, ethoxylated, dioleate, minimum number average molecular weight (in amu), 1260.110531-96-9 Castor oil, ethoxylated, oleate, minimum number average molecular weight (in amu), 1,600220037-02-5 Castor oil, polymer with adipic acid, linoleic acid, oleic acid and ricinoleic acid, minimum number average molecular weight (in amu), 3,5001357486-09-9 Castor oil, polyoxyethylated; the poly(oxyethylene) content averages 5-54 molesNone Cellulose carboxymethyl ether, potassium salt, minimum number average molecular weight 9587 Daltons54848-04-3 Cellulose, ethyl ether, minimum number average molecular weight (in amu), insert 13,000 Daltons9004-57-3 Cellulose, ethyl 2-hydroxyethyl ether, minimum number average molecular weight (in amu), 165,000 Daltons9004-58-4 Chlorinated polyethylene64754-90-1 Cross-linked nylon-type polymer formed by the reaction of a mixture of sebacoyl chloride and polymethylene polyphenylisocycanate with a mixture of ethylenediamine and diethylenetriamineNone Cross-linked polyurea-type encapsulating polymerNone D-Glucitol, polymer with decanedioic acid, docosanoate, minimum number average molecular weight (in amu) 1,100943440-33-3 D-Glucitol, polymer with decanedioic acid, docosanoate, minimum number average molecular weight (in amu) 1,1001681043-28-6 D-Glucitol, polymer with decanedioic acid, octadecanoate, minimum number average molecular weight (in amu) 1,10068562-93-6 D-Glucitol, polymer with decanedioic acid and 1,3-propanediol, minimum number average molecular weight (in amu) 1,1001681043-31-1 D-Glucitol, polymer with decanedioic acid and 1,3-propanediol, octadecanoate, minimum number average molecular weight (in amu) 1,1001681043-33-3 α-D-Glucopyranoside, β-D-fructofuranosyl, polymer with methyloxirane and oxirane with a minimum number average molecular weight (in amu) of 9,80026301-10-0 Dimethylpolysiloxane minimum number average molecular weight (in amu), 6,80063148-62-9 Dimethyl silicone polymer with silica, minimum number average molecular weight (in amu), 1,100,00067762-90-7 α-(o,p-Dinonylphenyl)-ω-hydroxypoly(oxyethylene) produced by condensation of 1 mole of dinonylphenol (nonyl group is a propylene trimer isomer) with an average of 140-160 moles of ethylene oxide9014-93-1 Docosyl methacrylate-acrylic acid copolymer, or docosyl methacrylate-octadecyl methacrylate-acrylic acid copolymer, minimum number average molecular weight (in amu), 3,000None 1,12-Dodecanediol dimethacrylate polymer, minimum molecular weight (in amu), 100,000None α-(p-Dodecylphenyl)-ω-hydroxypoly(oxyethylene) produced by the condensation of 1 mole of dodecylphenol (dodecyl group is a propylene tetramer isomer) with an average of 30-70 moles of ethylene oxide9014-92-0
26401-47-8
1,2-Ethanediamine, N1-(2-aminoethyl)-, polymer with 2,4-diisocyanato-1-methylbenzene, minimum number average molecular weight (in amu), one million35297-61-1 1, 2-Ethanediamine, polymer with methyl oxirane and oxirane, minimum number average molecular weight (in amu), 1,10026316-40-5 Ethanol, 2,2′,2″-nitrilotris, compd. with α-hydro-hydroxypoly (oxy-1,2-ethanediyl) ether with N-[4-[[4-[bis(2-hydroxyethyl)amino]phenyl](2,4-disulfophenyl)methylene]-2,5-cyclohexadien-1-ylidene]-2-hydroxy-N-(2-hydroxyethyl)ethanaminium inner salt (1:4:1), minimum number average molecular weight (in amu) of 1,4001147101-80-1 Ethylene glycol dimethyacrylate-lauryl methacrylate copolymer, minimum molecular weight (in amu), 100,000None Ethylene glycol dimethacrylate polymer, minimum molecular weight (in amu), 100,000None Fatty acids, montan-wax, ethoxylated, minimum number average molecular weight (in amu), 180068476-04-0 Fatty acids, C18-unsatd., dimers, polymers with docosanoic acid and sorbitol, minimum number average molecular weight (in amu) 1,1001685270-83-0 Fatty acids, C18-unsatd., dimers, polymers with docosenoic acid and sorbitol, minimum number average molecular weight (in amu) 1,1001685271-02-6 Fatty acids, C18-unsatd., dimers, polymers with docosenoic acid, 1,3-propanediol and sorbitol, minimum number average molecular weight (in amu) 1,1001685271-04-8 Fatty acids, C18-unsatd., dimers, polymers with docosanoic acid, 1,3-propanediol and stearic acid, minimum number average molecular weight (in amu) 1,1001685270-84-1 Fatty acids, C18-unsatd., dimers, polymers with 1,3-propanediol, sorbitol and stearic acid1685271-01-5 Fatty acids, C18-unsatd., dimers, polymers with sorbitol and stearic acid, minimum number average molecular weight (in amu) 1,1001685270-99-8 Fatty acids, C18-unsatd., dimers, polymers with ethylenediamine and stearyl alcohol, minimum number average molecular weight (in amu) 1,400363162-42-9 Fatty acids, C18-unsatd., dimers, hydrogenated, polymers with ethylenediamine, neopentyl glycol and stearyl alcohol, minimum number average molecular weight (in amu) 1,400678991-29-2 Fatty acids, C18-unsatd., dimers, hydrogenated, polymers with ethylenediamine and stearyl alcohol, minimum number average molecular weight (in amu) 1,400951153-32-5 Fatty acids, C18-unsatd., dimers, polymers with 1-docosanol and ethylenediamine, minimum number average molecular weight (in amu) 1,4001699751-19-3 Fatty acids, C18-unsatd., dimers, polymers with cetyl alcohol, neopentyl glycol and trimethylenediamine, minimum number average molecular weight (in amu) 1,4001699751-23-9 Fatty acids, C18-unsatd., dimers, polymers with hexamethylenediamine and stearyl alcohol, minimum number average molecular weight (in amu) 1,4001699751-24-0 Fatty acids, C18-unsatd., dimers, hydrogenated, polymers with cetyl alcohol and ethylenediamine, minimum number average molecular weight (in amu) 1,4001699751-25-1 Fatty acids, C18-unsatd., dimers, hydrogenated, polymers with neopentyl glycol, stearyl alcohol and trimethylenediamine, minimum number average molecular weight (in amu) 1,4001699751-28-4 Fatty acids, C18-unsatd., dimers, polymers with 1-docosanol and trimethylenediamine, minimum number average molecular weight (in amu) 1,4001699751-29-5 Fatty acids, C18-unsatd., dimers, polymers with 1-docosanol, hexamethylenediamine and neopentyl glycol, minimum number average molecular weight (in amu) 1,4001699751-31-9 Fatty acids, C18-unsatd., dimers, polymers with docosanoic acid, 1,3-propanediol and sorbitol, minimum number average molecular weight (in amu) 1,4001685271-04-8 Fatty acids, rape-oil, triesters with polyethylene glycol ether with glycerol (3:1); minimum number average molecular weight (in amu), 1800688045-21-8 Fatty acids, tall-oil, ethoxylated propoxylated, minimum number average molecular weight (in amu), 2,00967784-86-5 Formaldehyde, polymer with α-[bis(1-phenylethyl)phenyl]-ω-hydroxypoly(oxy-1,2-ethanediyl), number average molecular weight (in amu), 1,803157291-93-5 Formaldehyde, polymer with 1,3-benzenediol, ethers with polyethylene glycol mono-Me ether, minimum number average molecular weight (in amu) 1,000,0001998118-32-3 Formaldehyde, polymer with 1,3-benzenediol, 2-methyloxirane and oxirane, ethers with polyethylene glycol mono-Me ether, minimum number average molecular weight (in amu) 1,000,0001998118-31-2 Formaldehyde, polymer with 2-methyloxirane and 4-nonylphenol, minimum number average molecular weight (in amu), 4,00037523-33-4 Formaldehyde, reaction products with melamine, minimum number average molecular weight (in amu), 1000094645-56-4 Formaldehyde, reaction products with melamine and methanol, minimum number average molecular weight (in amu), 1000094645-53-1 Fumaric acid-isophthalic acid-styrene-ethylene/propylene glycol copolymer, minimum average molecular weight (in amu), 1 × 10 18None 2,5-Furandione, polymer with ethenylbenzene, hydrolyzed, 3-(dimethylamino)propyl imide, imide with polyethylene-polypropylene glycol 2-aminopropyl me ether, 2,2′-(1,2-diazenediyl)bis[2-methylbutanenitrile]-initiated, minimum number average molecular weight (in amu), 5,8161062609-13-5 2,5-Furandione, polymer with ethenylbenzene, octyl imide, imide with polyethylene-polypropylene glycol 2-aminopropyl Me ether, minimum number average molecular weight (in amu), 11,0001812871-29-6 2,5-Furandione, polymer with ethenylbenzene, reaction products with polyethylene-polypropylene glycol 2-aminopropyl Me ether; minimum number average molecular weight (in amu), 14,000162568-32-3 2,5-Furandione, polymer with methoxyethene, butyl ethyl ester, sodium salt, minimum number average molecular weight (in amu), 18,2001471342-08-1 Hexadecyl acrylate-acrylic acid copolymer, hexadecyl acrylate-butyl acrylate-acrylic acid copolymer, or hexadecyl acrylate-dodecyl acrylate-acrylic acid copolymer, minimum number average molecular weight (in amu), 3,000None Hexamethyl disilizane, reaction product with silica, minimum number average molecular weight (in amu), 645,00068909-20-6 1,6-Hexanediol dimethyacrylate polymer, minimum molecular weight (in amu), 100,000None α-Hydro-ω-hydroxy-poly(oxyethylene) C8 alkyl ether citrates, poly(oxyethylene) content is 4-12 moles, minimum number average molecular weight (in amu) 1,300330977-00-9 α-Hydro-ω-hydroxy-poly(oxyethylene) C10-C16-alkyl ether citrates, poly(oxyethylene) content is 4-12 moles, minimum number average molecular weight (in amu) 1,100330985-58-5 α-Hydro-ω-hydroxy-poly(oxyethylene) C16-C18-alkyl ether citrates, poly(oxyethylene) content is 4-12 moles, minimum number average molecular weight (in amu) 1,300330985-61-0 α-Hydro-ω-hydroxypoly(oxyethylene), minimum number average molecular weight (in amu), 17,00025322-68-3 α-Hydro-ω-hydroxypoly(oxyethylene)poly (oxypropylene) poly(oxyethylene) block copolymer; the minimum poly(oxypropylene) content is 27 moles and the minimum molecular weight (in amu) is 1,900None α-Hydro-ω-hydroxypoly(oxypropylene); minimum molecular weight (in amu) 2,000None 12-Hydroxystearic acid-polyethylene glycol copolymer, minimum number average molecular weight (in amu), 3,69070142-34-6 Isodecyl alcohol ethoxylated (2-8 moles) polymer with chloromethyl oxirane, minimum number average molecular weight (in amu) 2,500None Lauryl methacrylate-1,6-hexanediol dimethacrylate copolymer, minimum molecular weight (in amu), 100,000None Lignosulfonic acid, calcium, comp. with 1,6 hexanediamine polymer with guanidine hydrochloride (1:1), minimum number average molecular weight (in amu); 4,500 daltons1905409-74-6 Maleic acid-butadiene copolymerNone Maleic acid monobutyl ester-vinyl methyl ether copolymer, minimum average molecular weight (in amu), 52,00025119-68-0 Maleic acid monoethyl ester-vinyl methyl ether copolymer, minimum average molecular weight (in amu), 46,00025087-06-3 Maleic acid monoisopropyl ester-vinyl methyl ether copolymer, minimum average molecular weight (in amu), 49,00031307-95-6 Maleic anhydride-diisobutylene copolymer, sodium salt, minimum number average molecular weight (in amu) 5,0007-18,00037199-81-8 Maleic anhydride-methylstyrene copolymer sodium salt, minimum number average molecular weight (in amu), 15,00060092-15-1 Maleic anhydride-methyl vinyl ether, copolymer, average molecular weight (in amu), 250,000None Maltodextrin-vinyl pyrrolidinone copolymer, minimum number average molecular weight (in amu), 21,0001323833-56-2 Methacrylic acid-methyl methacrylate-polyethylene glycol methyl ether methacrylate copolymer, minimum number averge molecular weight (in amu), 3,700100934-04-1 Methacrylic acid-methyl methacrylate-polyethylene glycol monomethyl ether methacrylate graft copolymer, minimum number average molecular weight (in amu), 1,800111740-36-4 Methacrylic copolymer, minimum number average molecular weight (in amu), 15,00063150-03-8 Methyl methacrylate-methacrylic acid-monomethoxypolyethylene glycol methacrylate copolymer,) minimum number average molecular weight (in amu), 2,730119724-54-8 Methyl methacrylate-2-sulfoethyl methacrylate-dimethylaminoethylmethacrylate-glycidyl methacrylate-styrene-2-ethylhexyl acrylate graft copolymer, minimum average molecular weight (in amu), 9,600None 2-methyl-2-[(1-oxo-2-propenyl)amino]-1-propanesulfonic acid monosodium salt polymer with 2-propenoic acid, 2-methyl-, C12-16 alkyl esters, minimum number average molecular weight (in amu), 10,0002115702-24-2 Methyl vinyl ether-maleic acid copolymer), minimum number average molecular weight (in amu), 75,00025153-40-6 Methyl vinyl ether-maleic acid copolymer, calcium sodium salt, minimum number average molecular weight (in amu), 900,00062386-95-2 Monophosphate ester of the block copolymer α-hydro-ω-hydroxypoly(oxyethylene) poly(oxypropylene) poly(oxyethylene); the poly(oxypropylene) content averages 37-41 moles, average molecular weight (in amu), 8,000None α-(p-Nonylphenyl)-ω-hydroxypoly(oxyethylene) mixture of dihydrogen phosphate and monohydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts of the phosphate esters; the nonyl group is a propylene trimer isomer and the poly(oxyethylene) content averages 30 molesNone α-(p-Nonylphenyl)-ω-hydroxypoly(oxyethylene) sulfate, and its ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts; the nonyl group is a propylene trimer isomer and the poly(oxyethylene) content averages 30-90 moles of ethylene oxideNone α-(p-Nonylphenyl-ω-hydroxypoly(oxypropylene) block polymer with poly(oxyethylene); polyoxypropylene content of 10-60 moles; polyoxyethylene content of 10-80 moles; molecular weight (in amu), 1,200-7,100.None α-(ρ-Nonylphenyl)poly(oxypropylene) block polymer with poly(oxyethylene); poly oxyethylene content 30 to 90 moles; minimum number average molecular weight (in amu), 1,88937251-69-7 Octadecanoic acid, 12-hydroxy-, homopolymer, ester with α, α', α”-1,2,3-propanetriyltris[ω-hydroxypoly(oxy-1,2-ethanediyl)], minimum number average molecular weight (in amu), 5,0001939051-18-9 Octadecanoic acid, 12-Hydroxy-, Homopolymer Ester with 2-Methylloxirane Polymer with Oxirane monobutyl Ether, minimum number average molecular weight (in amu), 4,5001373125-59-7 Octadecanoic acid, 12-hydroxy-, homopolymer, octadecanoate minimum number average molecular weight (in amu), 1,37058128-22-6) α-cis-9-Octadecenyl-ω-hydroxypoly(oxyethylene); the octadecenyl group is derived from oleyl alcohol and the poly(oxyethylene) content averages 20 molesNone Octadecyl acrylate-acrylic acid copolymer, octadecyl acrylate-dodecyl acrylate-acrylic acid copolymer, octadecyl methacrylate-butyl acrylate-acrylic acid copolymer, octadecyl methacrylate-hexyl acrylate-acrylic acid copolymer, octadecyl methacrylate-dodecyl acrylate-acrylic acid copolymer, or octadecyl methacrylate-dodecyl methacrylate-acrylic acid copolymer, minimum number average molecular weight (in amu) 3,000None Oleic acid diester of α-hydro-ω-hydroxypoly(oxyethylene); the poly(oxyethylene), average molecular weight (in amu), 2,300None 2-oxepanone, homopolymer, minimum number average molecular weight (in amu) 52,00024980-41-4 Oxirane, decyl-, reaction products with polyethylene-polypropylene glycol ether with trimethylolpropane (3:1)903890-89-1 Oxirane, hexadecyl-, reaction products with polyethylene-polypropylene glycol ether with trimethylolpropane (3:1)893427-80-0 Oxirane, 2-methyl-, polymer with oxirane, dimethyl ether, minimum number average molecular weight (in amu), 2,80061419-46-3 Oxirane, 2-methyl-, polymer with oxirane, ether with D-glucitol (6:1), minimum number average molecular weight (in amu) of 10,00056449-05-9 Oxirane, 2-methyl-, polymer with oxirane, ether with 1,2,3-propanetriol (3:1), minimum number average molecular weight (in amu) of 6,0009082-00-2 Oxirane, methyl-, polymer with oxirane, ether with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol (3:1), reaction products with tetradecyloxirane903890-90-4 Oxirane, methyl-, polymer with oxirane, mono[2-(2-butoxyethoxy) ethyl] ether, minimum number average molecular weight (in amu), 2,50085637-75-8 Oxirane, methyl-, polymer with Oxirane, Monobutyl Ether9038-95-3 Oxirane, 2-methyl-, polymer with oxirane, mono[2-[2-(2-methoxymethylethoxy) methylethoxy]methylether] ether, minimum number average molecular weight (in amu), 1400 daltonsCAS Reg. No. 2112825-11-1. Oxirane, 2-methyl-, polymer with oxirane, minimum number average molecular weight (in amu), 1,1009003-11-6 Oxirane, 2-methyl-, polymer with oxirane, mono [2-[2-(2-butoxymethylethoxy)methylethoxy]methylethyl] ether, minimum number average molecular weight (in amu), 3,000926031-36-9 Oxirane, 2-methyl, polymer with oxirane, hydrogen sulfate, ammonium salt; average molecular weight (in amu), 180057608-14-7 Oxirane, 2-methyl, polymer with oxirane, hydrogen sulfate, potassium salt; average molecular weight (in amu), 21001838191-48-2 Oxirane, 2-methyl-, polymer with oxirane, mono-(9Z)-9-octadecanoate, methyl ether, minimum number average molecular weight (in amu), 1,20072283-36-4 Oxirane, 2-methyl-, polymer with oxirane, di-(9Z)-9-octadecenoate, minimum number average molecular weight (in amu), 250067167-17-3 Oxirane, 2-(phenoxymethyl)-, polymer with oxirane, ether with 2,2′,2″-nitrilotris[ethanol] (3:1), diblock, minimum number average molecular weight (in amu), 5,3002307555-89-9 Oxirane, 2-(phenoxymethyl)-, polymer with oxirane, monobutyl ether, block, minimum number average molecular weight (in amu), 2300 DaltonsCAS Reg. No. 1010819-15-4 Oxirane, phenyl-, polymer with oxirane, mono(dihydrogen phosphate), decyl ether, minimum number average molecular weight (in amu) 1300308336-53-0 Oxirane, phenyl, polymer with oxirane, monooctyl ether, minimum average molecular weight (in amu) 1,20083653-00-3 Polyamide polymer derived from sebacic acid, vegetable oil acids with or without dimerization, terephthalic acid and/or ethylenediamineNone Polyethylene glycol-polyisobutenyl anhydride-tall oil fatty acid copolymer, minimum number average molecular weight (in amu), 2,96068650-28-2 Polyethylene, oxidized, minimum number average molecular weight (in amu), 1,200None Polyglycerol polyricinoleate; minimum number average molecular weight (in amu), 2,50029894-35-7 Polymers produced by the reaction of either 1,6-hexanediisocyanate; 2,4,4-trimethyl-1,6-hexanediisocyanate; 5-isocyanato-1-(isocyanatomethyl)-fxsp0;1,3,3-trimethyIcyclohexane (isophoronediisocyanate); 4,4′-methylene-bis-1,1′-cyclohexanediisocyanate; 4,4′-methylene-bis-1,1′ benzyldiisocyanate; or 1,3-bis-(2-isocyanatopropan-2-yl)benzene with polyethylene glycol and end-capped with one or a mixture of more than one of octanol, decanol, dodecanol, tetradecanol, hexadecanol, octadecanol, and octadec-9-enol or polyethyleneglycol ethers of octanol, decanol, dodecanol, tetradecanol, hexadecanol, octadecanol, and octadec-9-enol, minimum number average molecular weight (in amu), 20,0001161844-26-3, 1161844-30-9, 1161844-43-4, 1161844-51-4, 1161844-53-6, 693252-31-2, 162993-60-4, 630102-86-2 Polymethylene polyphenylisocyanate, polymer with ethylene diamine, diethylene triamine and sebacoyl chloride, cross-linked; minimum number average molecular weight (in amu), 100,000None Polyoxyalkylated glycerol fatty acid esters; the mono-, di-, or triglyceride mixtures of C8 through C22, primarily C8 through C18 saturated and unsaturated, fatty acids containing up to 15% water by weight reacted with a minimum of three moles of either ethylene oxide or propylene oxide; the resulting polyoxyalkylated glycerol ester polymer minimum number average molecular weight (in amu), 1,50061791-23-9, 68201-46-7, 68440-49-3, 68458-88-8, 68553-06-0, 68606-12-2, 68648-38-4, 70377-91-2, 70914-02-2, 72245-12-6, 72698-41-3, 180254-52-8, 248273-72-5, 308063-50-5, 952722-33-7 Polyoxyalkylated sorbitan fatty acid esters with C6 through C22 aliphatic alkanoic and/or alkenoic fatty acids, branched or linear, the resulting polyoxyalkylene sorbitan esters minimum number average molecular weight (in amu), 1,30081776-11-6, 87090-31-1, 88895-72-1, 103171-31-9, 161026-53-5, 1472644-80-6, 1472644-81-7, 1472644-84-0, 1472644-85-1, 1472644-87-3, 1472644-88-4, 1472654-83-3, 1472655-32-5, 1472661-05-4, 1472661-17-8, 1472663-59-4, 1472663-64-1, 1472663-66-3, 1472663-92-5, 1472668-03-3 Polyoxyalkylated trimethylopropanes with 20 to 80 moles of ethylene and/or propylene oxide, fatty acid esters with C8 through C22 aliphatic alkanoic and/or alkenoic fatty acids, branched or linear; minimum number average molecular weight (in amu), 3,00025765-36-0; 29860-47-7; 37339-03-0; 52624-57-4; 58090-24-7; 63964-38-5; 72939-62-9; 74521-14-5; 75300-70-8; 75300-90-2; 84271-03-4; 84271-04-5; 86850-92-2; 107120-02-5; 133331-01-8; 137587-60-1; 149797-40-0; 149797-41-1; 150695-97-9; 152130-24-0; 163349-94-8; 163349-95-9; 163349-96-0; 163349-97-1; 163349-98-2; 165467-70-9; 183619-46-7; 183619-50-3; 185260-01-9; 202606-04-0; 210420-84-1; 233660-70-3; 263011-96-7; 283602-94-8; 701980-40-7; 872038-58-9; 875709-44-7; 875709-45-8; 875709-46-9; 875709-47-0; 879898-63-2; 910038-01-6; 1190748-04-9; 1225384-02-0; 1428944-41-5; 1446498-15-2. Poly(oxy-1,2-ethanediyl), a-hydro-ω-hydroxy-, ether with N-[4-[bis[4-[bis(2-hydroxyethyl)amino]phenyl]methylene]-2,5-cyclohexadien-1-ylidene]-2-hydroxy-N-(2-hydroxyethyl)ethanaminium, benzenesulfonate (6:1:1), minimum number average molecular weight (in amu) of 1,3701313600-46-2 Poly(oxy-1,2-ethanediyl), α-hydro-ω-hydroxy-, polymer with 1, 1′-methylene-bis-[4-isocyanatocyclohexane], minimum number average molecular weight (in amu), 180039444-87-6 Poly(oxy-1,2-ethanediyl)-α-hydro-ω-hydroxy-, polymer with poly(isocyanatoalkyl) benzene, alkylol-blocked, number average molecular weight (Mn), 18,721None Poly(oxy-1,2-ethanediyl), polymer with 1,2-ethandiol, 2-methyl-1,3-propanediol, hexanedioic acid, 1,4-benzenedicarboxylic acid, 1,3-benzenedicarboxylic acid, 1,1′-methylenebis[4-isocyanatobenzene] and 2-ethyl-2-(hydroxymethyl)-1,3-propanediol, with a minimum number average molecular weight (in amu) of 1400None Polyoxyethylated primary amine (C14-C18); the fatty amine is derived from an animal source and contains 3% water; the poly(oxyethylene) content averages 20 molesNone Polyoxyethylated sorbitol fatty acid esters; the polyoxyethylated sorbitol solution containing 15% water is reacted with fatty acids limited to C12, C14, C16, and C18, containing minor amounts of associated fatty acids; the poly(oxyethylene) content averages 30 moles.None Polyoxyethylated sorbitol fatty acid esters; the sorbitol solution containing up to 15% water is reacted with 20-50 moles of ethylene oxide and aliphatic alkanoic and/or alkenoic fatty acids C8 through C22 with minor amounts of associated fatty acids; the resulting polyoxyethylene sorbitol ester having a minimum molecular weight (in amu), 1,300None Poly(oxyethylene/oxypropylene) monoalkyl (C6-C10) ether sodium fumarate adduct, minimum number average molecular weight (in amu), 1,900102900-02-7 Poly[oxy(methyl-1,2-ethanediyl)], α-[(9Z)-1-oxo-9-octadecen-1-yl]-ω-[[(9Z)-1-oxo-9-octadecen-1yl]oxy]-, minimum number average molecular weight (in amu) 2,30026571-49-3 Polyoxymethylene copolymer, minimum number average molecular weight (in amu), 15,000None Poly(oxypropylene) block polymer with poly(oxyethylene), molecular weight (in amu), 1,800-16,000None Poly(phenylhexylurea), cross-linked, minimum average molecular weight (in amu), 36,000None Polypropylene9003-07-0 Polystyrene, minimum number average molecular weight (in amu), 50,0009003-53-6 Polytetrafluoroethylene9002-84-0 Polyvinyl acetate, copolymer with maleic anhydride, partially hydrolyzed, sodium salt, minimum number average molecular weight (in amu), 53,000None Polyvinyl acetate, minimum molecular weight (in amu), 2,000None Polyvinyl acetate—polyvinyl alcohol copolymer, minimum number average molecular weight (in amu), 50,00025213-24-5 Polyvinyl acetate—polyvinyl alcohol copolymer, minimum number average molecular weight (in amu), 14,00025213-24-5 Polyvinyl alcohol9002-89-5 Polyvinyl chlorideNone Polyvinyl chloride, minimum number average molecular weight (in amu), 29,0009002-86-2 Polyvinylpyrrolidone butylated polymer, minimum number average molecular weight (in amu), 9,50026160-96-3 Poly(vinylpyrrolidone), minimum number average molecular weight (in amu), 4,0009003-39-8 Poly(vinylpyrrolidone-1-eicosene), minimum average molecular weight (in amu), 3,00028211-18-9 Poly(vinylpyrrolidone-1-hexadecene), minimum average molecular weight (in amu), 4,70063231-81-2 Propanesulfonic acid, 2-methyl-2-[(1-oxo-2-propen-1-y1)amino]-, homopolymer, sodium salt, minimum number average molecular weight (in amu) 14,00055141-01-0 1-propanesulfonic acid, 2-methyl-2-[(1-oxo-2-propenyl)amino]-, monosodium salt, polymer with ethenol and ethenyl acetate, minimum number average molecular weight (in amu) 50,000107568-12-7 1-Propanesulfonic acid, 2-methyl-2-[(1-oxo-2-propen-1-y1)amino]-, sodium salt (1:1), homopolymer, minimum number average molecular weight (in amu) 14,00035641-59-9 Propanoic acid, 3-hydroxy-(hydroxymethyl)-2-methyl-, polymer with 2-amino-2-methyl-1-propanol, α-hydro-ω-hydroxypoly[oxy(methyl-1,2-ethanediyl)], 5-isocyanato-1-(isocyanatomethyl)-1,3,3-trimethylcyclohexane and methyloxirane polymer with oxirane ether with 4,4′-(1-methylethylidene)bis[phenol] (2:1), polyethylene-polypropylene glycol 2-aminopropyl Me ether-blocked, compds. with 2-amino-2-methyl-1-propanol, minimum number average molecular weight (in amu), 6,800515152-49-5 2-Propene-1-sulfonic acid sodium salt, polymer with ethenol and ethenyl acetate, number average molecular weight (in amu) 6,000-12,000None 2-Propenoic acid, butyl ester, polymer with 1,6-diisocyanatohexane, N-(hydroxymethyl)-2-methyl-2-propenamide and 2-propenenitrile, minimum number average molecular weight (in amu), 100,0001469998-09-1 2-Propenoic acid, butyl ester, polymer with ethenyl acetate and sodium ethenesulfonate, minimum number average molecular weight (in amu), 20,50066573-43-1 2-propenoic acid, butyl ester, polymer with ethenylbenzene, methyl 2-methyl-2-propenoate and 2-propenoic acid (in amu), 190027306-39-4 2-Propenoic acid, butyl ester, polymer with ethyl 2-propenoate and N-(hydroxymethyl)-2-propenamide, minimum number average molecular weight (in amu), 30,00033438-19-6 2-Propenoic acid, 2-ethylhexyl ester, polymer with ethenylbenzene 14,000 daltons 25153-46-2 2-Propenoic acid, 2-ethylhexyl ester, polymer with ethenylbenzene and 2-methylpropyl 2-methyl-2-propenoate, minimum number average molecular weight (in amu), 18,00068240-06-2 2-Propenoic acid, homopolymer, ester with α-methyl-ω-hydroxypoly(oxy-1,2-ethanediyl) and α-[2,4,6-tris(1-phenylethyl)phenyl]-ω-hydroxypoly(oxy-1,2-ethanediyl), graft, sodium salt, minimum number average molecular weight (in amu), 4,0002221936-17-8 2-propenoic acid, homopolymer, ester with α-[2,4,6-tris(1-phenylethyl)phenyl]-ω-hydroxypoly(oxy-1,2-ethanediyl), compd. with 2,2′,2″-nitrilotris[ethanol]), minimum number average molecular weight (in amu), 10,0001477613-46-9 2-Propenoic acid, 2-hydroxyethyl ester, polymer with α-[4-(ethenyloxy)butyl]-ω-hydroxypoly (oxy-1,2-ethanediyl), minimum number average molecular weight (in amu), 17,0001007234-89-0 2-Propenoic acid, methyl-, polymer with butyl 2-propenoate and methyl 2-methyl-2-propenoate compd. with 2-amino-2-methyl-1-propanol, minimum number average molecular weight (in amu), 22,7001203962-19-9 [2-propenoic acid, 2-methyl-, C12-16-alkyl esters, telomers with 1-dodecanethiol, polyethylene-polypropylene glycol ether with propylene glycol monomethacrylate (1:1), and styrene 2,2'-(1,2-diazenediyl)bis[2-methylbutanenitrile]-initiated, minimum number average molecular weight (in amu), 4,000950207-35-9 2-propenoic acid, 2-methyl-, dodecyl ester, polymer with 1-ethenyl-2-pyrrolidinone and a-(2-methyl-1-oxo-2-propen-1-yl)-w-methoxypoly(oxy-1,2-ethanediyl), minimum number average molecular weight (in amu), 20,600193743-10-1 2-Propenoic acid, methyl ester, polymer with ethene and 2,5-furandione, minimum number average molecular weight (in amu), 10,50088450-35-5 2-Propenoic acid, methyl ester, polymer with ethenyl acetate, hydrolyzed, sodium salts886993-11-9 2-Propenoic acid, 2-methyl-, 2-ethylhexyl ester, telomer with 1-dodecanethiol, ethenylbenzene and 2-methyloxirane polymer with oxirane monoether with 1,2-propanediol mono(2-methyl-2-propenoate), hydrogen 2-sulfobutanedioate, sodium salt, 2, 2′-(1,2-diazenediyl)bis[2-methylpropanenitrile]-initiated, minimum number average molecular weight (in amu), 1,2001283712-50-4 2-Propenoic acid, 2-methyl-, 2-methylpropyl ester, homopolymer, minimum number average molecular weight (in amu), 55,0009011-15-8 2-Propenoic acid, 2-methyl-, 2-oxiranylmethyl ester, polymer with butyl 2-propenoate, ethenylbenzene and 2-ethylhexyl 2-propenoate, minimum number average molecular weight (in amu), 3,60058499-26-6 2-propenoic acid, 2-methyl-, 2-oxiranylmethyl ester, polymer with ethene, ethenyl acetate, ethenyltrimethoxysilane and sodium ethenesulfonate (1:1), minimum number average molecular weight (in amu), 20,000518057-54-0 2-Propenoic acid, 2-methyl-, phenylmethyl ester, polymer with 2-propenoic acid, peroxydisulfuric acid ([(HO)S(O)2]2O2) sodium salt (1:2)-initiated, compounds with diethanolamine, minimum number average molecular weight (in amu), 2,0001574486-33-1 2-Propenoic acid, 2-methyl-, phenylmethyl ester, polymer with 2-propenoic acid and sodium 2-methyl-2-[(1-oxo-2-propen-1-yl)amino]-1-propanesulfonate (1:1), peroxydisulfuric acid ([HO)S(O)2]202) sodium salt (1:2)-initiated minimum number average molecular weight >1,000 Daltons; maximum number average molecular weight 10,000 DaltonsCASRN 1246766-57-3 2-Propenoic acid, 2-methyl-, polymer with butyl 2-methyl-2-propenoate, butyl 2-propenoate, N-(1,1-dimethyl-3-oxobutyl)-2-propenamide, ethenylbenzene, 2-ethylhexyl 2-propenoate and methyl 2-methyl-2-propenoate, minimum number average molecular weight (in amu), 7,300481053-27-4 2-Propenoic acid, 2-methyl-, polymer with butyl 2-propenoate and ethenylbenzene, minimum number average molecular weight (in amu), 17,00025036-16-2 2-Propenoic acid, 2-Methyl-, Polymer with Butyl 2-Propenoate, Methyl 2-Methyl-2-Propenoate, Methyl 2-Propenoate and 2-Propenoic Acid, graft, Compound with 2-Amino-2-Methyl-1-Propanol153163-36-1 2-Propenoic Acid, 2-Methyl-, Polymer with Ethenylbenzene, 2-Ethylhexyl 2-Propenoate, 2-Hydroxyethyl 2-Propenoate, N-(Hydroxymethyl) -2-Methyl-2-Propenamide and Methyl 2-Methyl-2-Propenoate, Ammonium Salt146753-99-3 2-Propenoic acid, 2-methyl-, polymers with Bu acrylate, Et acrylate, Me methacrylate and polyethylene glycol methacrylate C16-18-alkyl ethers, minimum number average molecular weight (in amu), 13,000890051-63-5 2-propenoic acid, 2-methyl-, polymer with 2,5-furandione and 2,4,4-trimethyl-1-pentene, potassium salt, with a minimum number average molecular weight (in amu) of 6,0001802325-28-5 2-propenoic acid, 2-methyl-, polymers with tert-Bu acrylate, Me methacrylate, polyethylene glycol methacrylate C16-C18-alkyl ethers and vinylpyrrolidone, tert-Bu 2-ethylhexaneperoxoate-initiated, compounds with 2-amino-2-methyl-1-propanol, minimum number average molecular weight (in amu), 2,6001515872-09-9 2-Propenoic acid, 2-methyl-, telomer with 2-ethylhexyl 2-propenoate, 2-propanol and sodium 2-methyl-2-[(1-oxo-2-propen-1-yl) amino]-1-propanesulfonate (1:1), sodium salt, minimum number average molecular weight (in amu): 2,9001260001-65-7 2-Propenoic acid, monoester with 1,2-propanediol, polymer with α-[4-(ethenyloxy) butyl]-ω-hydroxypoly (oxy-1,2-ethanediyl) and 2,5-furandione, minimum number average molecular weight (in amu), 25,000955015-23-3 2-propenoic acid polymer, with 1,3-butadiene and ethenylbenzene, minimum number average molecular weight (in amu), 940025085-39-6 2-Propenoic acid, polymer with butyl 2-propenoate, ethenylbenzene and (1-methylethenyl) benzene, ammonium salt, minimum number average molecular weight (in amu), 2,300360564-31-4 2-Propenoic acid, polymer with ethene, ethenyl acetate and sodium ethenesulfonate, minimum number average molecular weight (in amu) 5,600429691-44-1 2-Propenoic acid, polymer with ethenyl acetate, ethenylbenzene, 2-ethylhexyl 2-propenoate and ethyl 2-propenoate, minimum number average molecular weight (50,149 Daltons)85075-52-1 2-Propenoic acid, polymer with ethenylbenzene and (1-methylethenyl)benzene, minimum number average molecular weight (in amu), 2,00052831-04-6 2-Propenoic acid, polymer with ethenylbenzene and (1-methylethenyl) benzene, sodium salt, minimum number average molecular weight (in amu), 2,800129811-24-1 2-Propenoic acid, polymer with α-[4-(ethenyloxy) butyl]-ω-hydroxypoly (oxy-1,2-ethanediyl) and 2,5-furandione, sodium salt, minimum number average molecular weight (in amu), 25,000251479-97-7 2-Propenoic acid, polymer with α-[4-(ethenyloxy) butyl]-ω-hydroxypoly (oxy-1,2-ethanediyl) and 1,2-propanediol mono-2-propenoate, potassium sodium salt, minimum number average molecular weight (in amu), 16,000518026-64-7 2-Propenoic acid, polymer with α-[4-(ethenyloxy) butyl]-ω-hydroxypoly (oxy-1, 2-ethanediyl), sodium salt, minimum number average molecular weight (in amu), 24,000250591-84-5 2-Propenoic acid, polymer with 2-propenamide, sodium salt, minimum number average molecular weight (in amu), 18,00025085-02-3 2-Propenoic acid, sodium salt, polymer with 2-propenamide, minimum number average molecular weight (in amu), 18,00025987-30-8 2-Propenoic, 2-methyl-, polymers with ethyl acrylate and polyethylene glycol methylacrylate C18-22 alkyl ethers888969-14-0 2-Propenoic acid, telomer with N-(1,1-dimethylethyl)-2-propenamide, sodium 2-methyl-2-[(1-oxo-2-propen-1-yl)amino]-1-propanesulfonate (1:1) and sodium sulfite (1:1), sodium salt; number average of molecular weight (in amu), 2,871115035-53-5 2-Pyrrolidone, 1-ethenyl-, polymer with ethenol, minimum number average molecular weight (in amu), 23,00026008-54-8 Silane, dichloromethyl- reaction product with silica minimum number average molecular weight (in amu), 3,340,00068611-44-9 Silane, trimethoxy[3-(oxiranylmethoxy)propyl]-, hydrolysis products with silica, minimum number average molecular weight (in amu), 640,00068584-82-7 Silicic acid, sodium salt, reaction products with chlorotrimethylsilane and iso-propyl alcohol, reaction with poly(oxypropylene)-poly(oxyethylene) glycol, minimum number average molecular weight (in amu), 75,000None Siloxanes and silicones, di-Me, Me hydrogen, reaction products with vinyl group-terminated di-Me siloxanes, minimum number average molecular weight (in amu) 10,600”156065-02-0 Sodium polyflavinoidsulfonate, consisting chiefly of the copolymer of catechin and leucocyanidinNone Soybean oil, ethoxylated; the poly(oxyethylene) content averages 10 moles or greater61791-23-9 Starch, oxidized, polymers with Bu acrylate, tert-Bu acrylate and styrene, minimum number average molecular weight (in amu), 10,000204142-80-3 Stearyl methacrylate-1,6-hexanediol dimethacrylate copolymer, minimum molecular weight (in amu), 100,000None Styrene, copolymers with acrylic acid and/or methacrylic acid, with none and/or one or more of the following monomers or polymers: acrylamidopropyl methyl sulfonic acid, methallyl sulfonic acid, 3-sulfopropyl acrylate, 3-sulfopropyl methacrylate, hydroxypropyl methacrylate, hydroxypropyl acrylate, hydroxyethyl methacrylate, hydroxyethyl acrylate, lauryl methacrylate, and/or poly(oxy-1,2-ethanediyl), α-(2-methyl-1-oxo-2-propenyl)-ω-methoxy-; and its sodium, potassium, ammonium, monoethanolamine, and triethanolamine salts; the resulting polymer having a minimum number average molecular weight (in amu), 1200None. Styrene-ethylene-propylene block copolymer, minimum number average molecular weight (in amu), 125,000108388-87-0 Styrene, 2-ethylhexyl acrylate, butyl acrylate copolymer, minimum number average molecular weight (in amu), 4,20030795-23-4 Styrene-2-ethylhexyl acrylate-glycidyl methacrylate-2-acrylamido-2-methylpropanesulfonic acid graft copolymer, minimum number average molecular weight (in amu), 12,500None Styrene-maleic anhydride copolymerNone Styrene-maleic anhydride copolymer, ester derivativeNone Styrene-maleic anhydride ethyl amine salt copolymer, minimum number average molecular weight (in amu), 1,700None Tall oil, polymer with polyethylene glycol and succinic anhydride monopolyisobutylene derivs., minimum number average molecular weight (in amu), 1,2001398573-80-2 Tamarind seed gum, 2-hydroxypropyl ether polymer, minimum number average molecular weight (in amu), 10,00068551-04-2 Tetradecyl acrylate-acrylic acid copolymer, minimum number average molecular weight (in amu), 3,000None Tetraethoxysilane, polymer with hexamethyldisiloxane, minimum number average molecular weight (in amu), 2,500104133-09-7 Tetraethoxysilane, polymer with hexamethyldisiloxane, minimum number average molecular weight (in amu), 6,500104133-09-7 α-[p-(1,1,3,3-Tetramethylbutyl)phenyl]-ω-hydroxypoly(oxyethylene) produced by the condensation of 1 mole of p-(1,1,3,3-tetramethylbutyl)phenol with a range of 30-70 moles of ethylene oxide9036-19-5
9002-93-1
α-[p-(1,1,3,3-Tetramethylbutyl)phenyl] poly(oxypropylene) block polymer with poly(oxyethylene); the poly(oxypropylene) content averages 25 moles, the poly(oxyethylene) content averages 40 moles, the molecular weight (in amu) averages 3,400None 1,3,5-triazine-2,4,6-triamine, polymer with formaldehyde, methylated, minimum number average molecular weight (in amu), 1000068002-20-0 1,3,5-triazine-2,4,6-triamine, polymer with formaldehyde, minimum number average molecular weight (in amu), 100009003-08-1 α-[2,4,6-Tris[1-(phenyl)ethyl]phenyl]-ω-hydroxy poly(oxyethylene) poly(oxypropylene) copolymer, the poly(oxypropylene) content averages 2-8 moles, the poly(oxyethylene) content averages 16-30moles, average molecular weight (in amu), 1,500None Alpha-[2,4,6-Tris[1-(phenyl)ethyl]phenyl]-Omega-hydroxy poly(oxyethylene) poly(oxypropylene) copolymer, the poly(oxypropylene) content averages 2-8 moles, the poly(oxyethylene) content averages 16-60 moles. Minimum number-average molecular weight (in amu) of 1,50070880-56-7 Urea-formaldehyde copolymer, minimum average molecular weight (in amu), 30,0009011-05-6 Vinyl acetate-allyl acetate-monomethyl maleate copolymer, minimum average molecular weight (in amu), 20,000None Vinyl acetate-ethylene copolymer, minimum number average molecular weight (in amu), 69,00024937-78-8 Vinyl acetate polymer with none and/or one or more of the following monomers: Ethylene, propylene, N-methyl acrylamide, acrylamide, monoethyl maleate, diethyl maleate, monooctyl maleate, dioctyl maleate, maleic anhydride, maleic acid, octyl acrylate, butyl acrylate, ethyl acrylate, methyl acrylate, acrylic acid, octyl methacrylate, butyl methacrylate, ethyl methacrylate, methyl methacrylate, methacrylic acid, carboxyethyl acrylate, and diallyl phthalate; and their corresponding sodium, potassium, ammonium, isopropylamine, triethylamine, monoethanolamine and/or triethanolamine salts; the resulting polymer having a minimum number average molecular weight (in amu), 1,200None Vinyl acetate-vinyl alcohol-alkyl lactone copolymer, minimum number average molecular weight (in amu), 40,000; minimum viscosity of 18 centipoiseNone Vinyl alcohol-disodium itaconate copolymer, minimum average molecular weight (in amu), 50,290None Vinyl alcohol-vinyl acetate copolymer, benzaldehyde-o-sodium sulfonate condensate, minimum number average molecular weight (in amu), 20,000None Vinyl alcohol-vinyl acetate-monomethyl maleate, sodium salt-maleic acid, disodium salt-γ-butyrolactone acetic acid, sodium salt copolymer, minimum number average molecular weight (in amu), 20,000None Vinyl chloride-vinyl acetate copolymersNone Vinyl pyrrolidone-acrylic acid copolymer, minimum number average molecular weight (in amu), 6,00028062-44-4 Vinyl pyrrolidone-dimethylaminoethylmethacrylate copolymer, minimum number average molecular weight (in amu), 20,00030581-59-0 Vinyl pyrrolidone-styrene copolymer25086-29-7
[67 FR 36528, May 24, 2002] Editorial Note:For Federal Register citations affecting § 180.960, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and at www.govinfo.gov.

§ 180.1011 - Viable spores of the microorganism Bacillus thuringiensis Berliner; exemption from the requirement of a tolerance.

(a) For the purposes of this section the microbial insecticide for which exemption from the requirement of a tolerance is being established shall have the following specifications:

(1) The microorganism shall be an authentic strain of Bacillus thuringiensis Berliner conforming to the morphological and biochemical characteristics of Bacillus thuringiensis as described in Bergey's Manual of Determinative Bacteriology, Eighth Edition.

(2) Spore preparations of Bacillus thuringiensis Berliner shall be produced by pure culture fermentation procedures with adequate control measures during production to detect any changes from the characteristics of the parent strain or contamination by other microorganisms.

(3) Each lot of spore preparation, prior to the addition of other materials, shall be tested by subcutaneous injection of at least 1 million spores into each of five laboratory test mice weighing 17 grams to 23 grams. Such test shall show no evidence of infection or injury in the test animals when observed for 7 days following injection.

(4) Spore preparations shall be free of the Bacillus thuringiensis β-exotoxin when tested with the fly larvae toxicity test (“Microbial Control of Insects and Mites,” R.P.M. Bond et al., p. 280 ff., 1971). This specification can be satisfied either by determining that each master seed lot brought into production is a Bacillus thuringiensis strain which does not produce β-exotoxin under standard manufacturing conditions or by periodically determining that β-exotoxin synthesized during spore production is eliminated by the subsequent spore-harvesting procedure.

(b) Exemption from the requirement of a tolerance is established for residues of the microbial insecticide Bacillus thuringiensis Berliner, as specified in paragraph (a) of this section, in or on honey and honeycomb and all other raw agricultural commodities when it is applied either to growing crops, or when it is applied after harvest in accordance with good agricultural practices.

[36 FR 22540, Nov. 25, 1971, as amended at 38 FR 19045, July 17, 1973; 42 FR 28540, June 3, 1977; 45 FR 43721, June 30, 1980; 45 FR 56347, Aug. 25, 1980; 74 FR 26533, June 3, 2009]

§ 180.1187 - L-glutamic acid; exemption from the requirement of a tolerance.

L-glutamic acid is exempt from the requirement of a tolerance on all food commodities when used in accordance with good agricultural practices.

[66 FR 33198, June 21, 2001]

§ 180.1016 - Ethylene; exemption from the requirement of a tolerance.

Ethylene is exempted from the requirement of a tolerance for residues when:

(a) For all food commodities, it is used as a plant regulator on plants, seeds, or cuttings and on all food commodities after harvest and when applied in accordance with good agricultural practices.

(b) Injected into the soil to cause premature germination of witchweed in bean (lima and string), cabbage, cantaloupe, collard, corn, cotton, cucumber, eggplant, okra, onion, pasture grass, pea (field and sweet), peanut, pepper, potato, sweet potato, sorghum, soybean, squash, tomato, turnip, and watermelon fields as part of the U.S. Department of Agriculture witchweed control program.

[39 FR 33315, Sept. 17, 1974, as amended at 40 FR 19477, May 5, 1975; 64 FR 31505, June 11, 1999]

§ 180.1188 - Gamma aminobutyric acid; exemption from the requirement of a tolerance.

Gamma aminobutyric acid is exempt from the requirement of a tolerance on all food commodities when used in accordance with good agricultural practices.

[66 FR 33198, June 21, 2001]

§ 180.1189 - Methyl salicylate; exemption from the requirement of a tolerance.

The biochemical pesticide methyl salicylate is exempt from the requirement of a tolerance for residues in or on food or feed when used as an insect repellant in food packaging and animal feed packaging at an application rate that does not exceed 0.2 mg of methyl salicylate per square inch of packaging materials.

[62 FR 61639, Nov. 19, 1997]

§ 180.1191 - Ferric phosphate; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the biochemical pesticide, ferric phosphate (FePO4, CAS No. 11045-86-0) in or on all food commodities.

[62 FR 56105, Oct. 29, 1997]

§ 180.1193 - Potassium dihydrogen phosphate; exemption from the requirement of a tolerance.

Potassium dihydrogen phosphate is exempted from the requirement of a tolerance in or on all food commodities when applied as a fungicide in accordance with good agricultural practices.

[63 FR 43085, Aug. 12, 1998]

§ 180.1195 - Titanium dioxide.

(a) Titanium dioxide (CAS Reg. No. 13463-67-7) is exempted from the requirement of a tolerance for residues in or on growing crops, when used as an inert ingredient (UV protectant) in microencapsulated formulations of the insecticide lambda cyhalothrin at no more than 3.0% by weight of the formulation and as an inert ingredient (UV stabilizer) at no more than 5% in pesticide formulations containing the active ingredient napropamide.

(b) Residues of titanium dioxide (CAS Reg. No. 13463-67-7) in honey are exempted from the requirement of a tolerance, when used as an inert ingredient (colorant) in pesticide formulations intended for varroa mite control around bee hives at no more than 0.1% by weight in the pesticide formulation.

(c) Titanium dioxide (CAS Reg. No. 13463-67-7) is exempted from the requirement of a tolerance for residues in or on growing crops, when used as an inert ingredient (colorant) in foliar applications at no more than 45% of the formulations containing anthraquinone.

[82 FR 30997, July 5, 2017, as amended at 83 FR 8619, Feb. 28, 2018]

§ 180.1196 - Peroxyacetic acid; exemption from the requirement of a tolerance.

(a) An exemption from the requirement of a tolerance is established for residues of peroxyacetic acid in or on all food commodities, when such residues result from the use of peroxyacetic acid as an antimicrobial treatment in solutions containing a diluted end use concentration of peroxyacetic acid up to 100 ppm per application on fruits, vegetables, tree nuts, cereal grains, herbs, and spices.

(b) An exemption from the requirement of a tolerance is established for residues of peroxyacetic acid, in or on all food commodities when used in sanitizing solutions containing a diluted end-use concentration of peroxyacetic acid up to 500 ppm, and applied to tableware, utensils, dishes, pipelines, tanks, vats, fillers, evaporators, pasteurizers, aseptic equipment, milking equipment, and other food processing equipment in food handling establishments including, but not limited to dairies, dairy barns, restaurants, food service operations, breweries, wineries, and beverage and food processing plants.

(c) An exemption from the requirement of a tolerance is established for residues of the biochemical pesticide peroxyacetic acid and its metabolites and degradates, including hydrogen peroxide and acetic acid, in or on all food commodities, when used in accordance with good agricultural practices.

[74 FR 26535, June 3, 2009, as amended at 76 FR 11969, Mar. 4, 2011]

§ 180.1197 - Hydrogen peroxide; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of hydrogen peroxide in or on all food commodities at the rate of ≤1% hydrogen peroxide per application on growing and postharvest crops.

[67 FR 41844, June 20, 2002]

§ 180.1198 - Gliocladium catenulatum strain J1446; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the microbial pesticide, Gliocladium catenulatum strain J1446 when used in or on all food commodities.

[63 FR 37288, July 10, 1998]

§ 180.1199 - Lysophosphatidylethanolamine (LPE); exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the biochemical pesticide lysophosphatidylethanolamine in or on all food commodities.

[67 FR 17636, Apr. 11, 2002]

§ 180.1017 - Diatomaceous earth; exemption from the requirement of a tolerance.

(a) Diatomaceous earth is exempted from the requirement of a tolerance for residues when used in accordance with good agricultural practice in pesticide formulations applied to growing crops, to food commodities after harvest, and to animals.

(b) Diatomaceous earth may be safely used in accordance with the following conditions. Application shall be limited solely to spot and/or crack and crevice treatments in food or feed processing and food or feed storage areas in accordane with the precribed conditions:

(1) It is used or intended for use for control of insects in food or feed processing and food or feed storage areas: Provided, That the food or feed is removed or covered prior to such use.

(2) To assure safe use of the insecticide, its label and labeling shall conform to that registered by the U.S. Environmental Protection Agency, and it shall be used in accordance with such label and labeling.

[65 FR 33716, May 24, 2000]

§ 180.1202 - Bacillus sphaericus; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the microbial pesticides, Bacillus sphaericus when used in or on all food crops.

[63 FR 48597, Sept. 11, 1998]

§ 180.1204 - Harpin protein; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of individual harpin proteins that meet specified physiochemical and toxicological criteria when used as biochemical pesticides on all food commodities to enhance plant growth, quality and yield, to improve overall plant health, and to aid in pest management. The physiochemical and toxicological criteria identifying harpin proteins are as follows:

(a) Consists of a protein less than 100 kD in size, that is acidic (pI<7.0), glycine rich (>10%), and contains no more than one cystine residue.

(b) The source(s) of genetic material encoding the protein are bacterial plant pathogens not known to be mammalian pathogens.

(c) Elicits the hypersensitive response (HR) which is characterized as rapid, localized cell death in plant tissue after infiltration of harpin into the intercellular spaces of plant leaves.

(d) Possesses a common secondary structure consisting of α and β units that form an HR domain.

(e) Is heat stable (retains HR activity when heated to 65 °C for 20 minutes).

(f) Is readily degraded by a proteinase representative of environmental conditions (no protein fragments >3.5 kD after 15 minutes degradation with Subtilisin A).

(g) Exhibits a rat acute oral toxicity (LD50) of greater than 5,000 mg product/kg body weight.

[69 FR 24996, May 5, 2004]

§ 180.1205 - Beauveria bassiana ATCC #74040; exemption from the requirements of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the insecticide Beauveria bassiana (ATCC #74040) in or on all food commodities when applied or used as ground and aerial foliar sprays for use only on terrestrial crops.

[64 FR 22796, Apr. 28, 1999]

§ 180.1206 - Aspergillus flavus strain AF36; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the microbial pesticide Aspergillus flavus strain AF36 in or on all food and feed commodities of almond; corn, field; corn, pop; corn, sweet; cotton; fig; and pistachio when used in accordance with label directions and good agricultural practices.

[88 FR 29544, May 8, 2023]

§ 180.1207 - N-acyl sarcosines and sodium N-acyl sarcosinates; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the following substances when used as inert ingredients (surfactants) at levels not to exceed 10% in pesticide formulations containing glyphosate:

Name CAS Reg. No. N-acyl sarcosines N-cocoyl sarcosine mixture68411-97-2 N-lauroyl sarcosine97-78-9 N-myristoyl sarcosine52558-73-3 N-oleoyl sarcosine110-25-8 N-stearoyl sarcosine142-48-3 Sodium N-acyl sarcosinates N-cocoyl sarcosine sodium salt mixture61791-59-1 N-methyl-N-(1-oxo-9-octodecenyl) glycine3624-77-9 N-methyl-N-(1-oxododecyl) glycine137-16-6 N-methyl-N-(1-oxooctadecyl) glycine5136-55-0 N-methyl-N-(1-oxotetradecyl glycine30364-51-3
[64 FR 68046, Dec. 6, 1999]

§ 180.1209 - Bacillus subtilis strain QST 713 and strain QST 713 variant soil; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the microbial pesticides Bacillus subtilis strain QST 713 and strain QST 713 variant soil when used in or on all food commodities.

[77 FR 73937, Dec. 12, 2012]

§ 180.1210 - Phosphorous acid; exemption from the requirement of a tolerance.

(a) An exemption from the requirement of a tolerance is established for residues of phosphorous acid and its ammonium, sodium and potassium salts in or on all food commodities when used as an agricultural fungicide and in or on potatoes when applied as a post-harvest treatment at 35,600 ppm or less phosphorous acid.

(b) An exemption from the requirement of a tolerance is established for residues of calcium salts of phosphorous acid, including its metabolites and degradates, in or on all food commodities when used as a fungicide or as a systemic acquired resistance (SAR) inducer.

[83 FR 3605, Jan. 26, 2018]

§ 180.1212 - Pseudomonas chlororaphis Strain 63-28; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the microbial pesticide Pseudomonas chlororaphis Strain 63-28 in or on all food commodities.

[66 FR 53346, Oct. 22, 2001]

§ 180.1213 - Coniothyrium minitans strain CON/M/91-08; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the microbial pesticide Coniothyrium minitans strain CON/M/91-08 when used in or on all food commodities.

[66 FR 16874, Mar. 28, 2001]

§ 180.1218 - Indian Meal Moth Granulosis Virus; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the microbial pesticide Indian Meal Moth Granulosis Virus when used in or on all food commodities.

[68 FR 55875, Sept. 29, 2003]

§ 180.1219 - Foramsulfuron; exemption from the requirement of a tolerance.

The pesticide foramsulfuron is exempted from the requirement of a tolerance in corn, field, grain/corn, field, forage/ corn, field, stover/corn, pop, grain/corn, pop, forage/corn, pop, stover; corn, sweet, forage; corn, sweet, kernel plus cob with husks removed; corn, sweet, stover when applied as a herbicide in accordance with good agricultural practices.

[74 FR 26535, June 3, 2009]

§ 180.1019 - Sulfuric acid; exemption from the requirement of a tolerance.

(a) Residues of sulfuric acid are exempted from the requirement of a tolerance when used in accordance with good agricultural practice when used as a herbicide in the production of garlic and onions, and as a vine desiccant in the production of potatoes and hops.

(b) Residues of sulfuric acid are exempted from the requirement of a tolerance in cattle, meat; goat, meat; hog, meat; horse, meat; sheep, meat; poultry, fat; poultry, meat; poultry, meat, byproducts; egg; milk; fish, shellfish, and irrigated crops when it results from the use of sulfuric acid as an inert ingredient in a pesticide product used in irrigation conveyance systems and lakes, ponds, reservoirs, or bodies of water in which fish or shellfish are cultivated. The sulfuric acid is not to exceed 10% of the pesticide formulation (non-aerosol formulations only).

[69 FR 40787, July 7, 2004, as amended at 74 FR 26533, June 3, 2009; 85 FR 67293, Oct. 22, 2020]

§ 180.1220 - 1-Methylcyclopropene; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the 1-Methylcyclopropene in or on fruits and vegetables when:

(a) Used as a post harvest plant growth regulator, i.e., for the purpose of inhibiting the effects of ethylene.

(b) Applied or used outdoors for pre-harvest treatments.

[73 FR 19150, Apr. 9, 2008]

§ 180.1222 - Sucrose octanoate esters; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of sucrose octanoate esters [(α-D-glucopyranosyl-β-D-fructofuranosyl-octanoate), mono-, di-, and triesters of sucrose octanoate] in or on all food commodities when used in accordance with good agricultural practices.

[67 FR 60152, Sept. 25, 2002]

§ 180.1223 - Imazamox; exemption from the requirement of a tolerance.

The herbicide imazamox, (±) 2, -[4,5-dihydro-4-methyl-4-(1-methylethyl)-5-oxo-1H-imidazol-2-yl]-5-(methoxymethyl)-3-pyridinecarboxylic acid, is exempt from the requirement of a tolerance on all food commodities when applied as a herbicide in accordance with good agricultural practices.

[68 FR 7433, Feb. 14, 2003]

§ 180.1224 - Bacillus pumilus GB34; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the microbial pesticide Bacillus pumilus GB34 when used as a seed treatment in or on all food commodities. An exemption is also granted for such residues on treated but unplanted soybean seeds.

[69 FR 76625, Dec. 22, 2004]

§ 180.1225 -

An exemption from the requirement of a tolerance is established for residues of decanoic acid in or on all raw agricultural commodities and in processed commodities, when such residues result from the use of decanoic acid as an antimicrobial treatment in solutions containing a diluted end-use concentration of decanoic acid (up to 170 ppm per application) on food contact surfaces such as equipment, pipelines, tanks, vats, fillers, evaporators, pasteurizers and aseptic equipment in restaurants, food service operations, dairies, breweries, wineries, beverage and food processing plants.

[68 FR 7939, Feb. 19, 2003; 68 FR 17308, Apr. 9, 2003]

§ 180.1226 - Bacillus pumilus strain QST2808; temporary exemption from the requirement of a tolerance.

A temporary exemption from the requirement of a tolerance is established for residues of the microbial pesticide Bacillus pumilus strain QST2808 when used in or on all agricultural commodities when applied/used in accordance with label directions.

[68 FR 36480, June 18, 2003]

§ 180.1228 - Diallyl sulfides; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of diallyl sulfides when used in/on garlic, leeks, onions, and shallots.

[68 FR 40808, July 9, 2003]

§ 180.1230 - Ferrous sulfate; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of ferrous sulfate.

[70 FR 33363, June 8, 2005]

§ 180.1231 - Lime; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of lime.

[70 FR 33363, June 8, 2005]

§ 180.1020 - Sodium chlorate; exemption from the requirement of a tolerance.

Sodium chlorate is exempted from the requirement of a tolerance for residues when used as a defoliant or desiccant in accordance with good agricultural practice on the following crops:

Bean, dry, seed Corn, field, forage Corn, field, grain Corn, field, stover Corn, pop, grain Corn, pop, stover Corn, sweet, forage Corn, sweet, stover Cotton, undelinted seed Flax, seed Grain, aspirated fractions Guar, seed Pea, southern Pepper, nonbell Potato Rice, grain Rice, straw Safflower, seed Sorghum, forage, forage Sorghum, grain, forage Sorghum, grain, grain Sorghum, grain, stover Soybean, forage Soybean, hay Soybean, seed Sunflower, seed Wheat, grain [74 FR 47457, Sept. 16, 2009]

§ 180.1232 - Lime-sulfur; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of lime-sulfur.

[70 FR 33363, June 8, 2005]

§ 180.1233 - Potassium sorbate; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of potassium sorbate.

[70 FR 33363, June 8, 2005]

§ 180.1234 - Sodium carbonate; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of sodium carbonate.

[70 FR 33363, June 8, 2005]

§ 180.1235 - Sodium hypochlorite; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of sodium hypochlorite.

[70 FR 33363, June 8, 2005]

§ 180.1236 - Sulfur; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of sulfur.

[70 FR 33363, June 8, 2005]

§ 180.1237 - Sodium metasilicate; exemption from the requirement of a tolerance.

(a) An exemption from the requirement of a tolerance is established for residues of sodium metasilicate in or on all food commodities when used in accordance with approved label rates and good agricultural practices as a plant desiccant, so long as the sodium metasilicate does not exceed 4% by weight in aqueous solution.

(b) An exemption from the requirement of a tolerance is established for residues of sodium metasilicate in or on all food commodities when used in accordance with approved label rates and good agricultural practices as an insecticide and fungicide, so long as the sodium metasilicate does not exceed 2.41% by weight in aqueous solution.

[71 FR 19441, Apr. 14, 2006]

§ 180.1240 - Thymol; exemption from the requirement of a tolerance.

(a) An exemption from the requirement of a tolerance is established for thymol (5-methyl-2-isopropyl-1-phenol) in or on all food commodities when used in accordance with good agricultural practices.

(b) An exemption from the requirement of a tolerance for residues of the thymol (as present in thyme oil) in or on food commodities when applied/used in/on public eating places, dairy processing equipment, and/or food processing equipment and utensils.

[70 FR 37696, June 30, 2005, as amended at 71 FR 2895, Jan. 18, 2006; 74 FR 12617, Mar. 25, 2009; 87 FR 54626, Sept. 7, 2022]

§ 180.1243 - Bacillus subtilis var. amyloliquefaciens strain FZB24; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance for residues of the Bacillus subtilis var. amyloliquefaciens strain FZB24 in or on all agricultural commodities when applied/used in accordance with label directions.

[68 FR 44640, July 30, 2003]

§ 180.1244 - Ammonium bicarbonate; exemption from the requirement of a tolerance.

An exemption from the requirement of tolerance is established for residues of ammonium bicarbonate used in or on all food commodities when used in accordance with good agricultural practices.

[69 FR 13745, Mar. 24, 2004]

§ 180.1245 - Rhamnolipid biosurfactant; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of rhamnolipid biosurfactant when used in accordance with good agricultural practices as a fungicide in or on all food commodities.

[69 FR 16800, Mar. 31, 2004]

§ 180.1021 - Copper; exemption from the requirement of a tolerance.

(a) Copper is exempted from the requirement of a tolerance in cattle, meat; goat, meat; hog, meat; horse, meat; sheep, meat; milk, poultry, fat; poultry, meat; poultry, meat byproducts; egg, fish, shellfish, and irrigated crops when it results from the use of:

(1) Copper sulfate as an algicide or herbicide in irrigation conveyance systems and lakes, ponds, reservoirs, or bodies of water in which fish or shellfish are cultivated.

(2) Basic copper carbonate (malachite) as an algicide or herbicide in impounded and stagnant bodies of water

(3) Copper triethanolamine and copper monoethanolamine as an algicide or herbicide in fish hatcheries, lakes, ponds, and reservoirs

(4) Cuprous oxide bearing antifouling coatings for control of algae or other coatings for control of algae or other organisms on submerged concrete or other (irrigation) structures.

(5) Copper oxide embedded in polymer emitter heads used in irrigation systems for root incursion prevention.

(b) The following copper compounds are exempt from the requirement of a tolerance when applied (primarily) as a fungicide to growing crops using good agricultural practices:

Copper compounds CAS Reg. No. Basic copper carbonate (malachite)1184-64-1 Copper ammonia complex16828-95-8 Copper ethylenediamine complex13426-91-0 Copper hydroxide20427-59-2 Copper octanoate20543-04-8 Copper oxychloride1332-65-6 Copper oxychloride sulfate8012-69-9 Copper salts of fatty and rosin acids9007-39-0 Copper sulfate basic1344-73-6 Copper sulfate pentahydrate7758-99-8 Cuprous oxide1317-19-1

(c) Copper sulfate pentahydrate (CAS Reg. No. 7758-99-8) is exempt from the requirement of a tolerance when applied as a fungicide to growing crops or to raw agricultural commodities after harvest, and as a bactericide/fungicide in or on meat, fat and meat by-products of cattle, sheep, hogs, goats, horses and poultry, milk and eggs when applied as a bactericide/fungicide to animal premises and bedding.

(d) Copper (II) hydroxide (CAS Reg. No. 20427-59-2) is exempt from the requirement of a tolerance when applied to growing crops or to raw agricultural commodities as an inert ingredient (for pH control) in pesticide products.

[65 FR 68912, Nov. 15, 2000, as amended at 69 FR 4069, Jan. 28, 2004; 71 FR 46110, Aug. 11, 2006; 74 FR 26534, June 3, 2009; 74 FR 47457, Sept. 16, 2009; 80 FR 37551, July 1, 2015]

§ 180.1246 - Yeast Extract Hydrolysate from Saccharomyces cerevisiae: exemption from the requirement of a tolerance.

This regulation establishes an exemption from the requirement of a tolerance for residues of the biochemical pesticide Yeast Extract Hydrolysate from Saccharomyces cerevisiae on all food commodities when applied/used for the management of plant diseases.

[69 FR 9958, Mar. 3, 2004]

§ 180.1248 - Exemption of citronellol from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the biochemical pesticide citronellol in or on all food commodities.

[69 FR 23146, Apr. 28, 2004]

§ 180.1250 - C8, C10, and C12 fatty acid monoesters of glycerol and propylene glycol; exemption from the requirement of a tolerance.

The C8, C10, and C12 straight-chain fatty acid monoesters of glycerol (glycerol monocaprylate, glycerol monocaprate, and glycerol monolaurate) and propylene glycol (propylene glycol monocaprylate, propylene glycol monocaprate, and propylene glycol monolaurate) are exempt from the requirement of a tolerance in or on all food commodities when used in accordance with approved label rates and good agricultural practice.

[69 FR 34944, June 23, 2004]

§ 180.1251 - Geraniol; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the biochemical pesticide geraniol in or on all food commodities.

[69 FR 23151, Apr. 28, 2004]

§ 180.1253 - Streptomyces lydicus WYEC 108; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the microbial pesticide Streptomyces lydicus WYEC 108 when used in or on all agricultural commodities when applied/used in accordance with label directions.

[69 FR 31301, June 3, 2004]

§ 180.1254 - Aspergillus flavus NRRL 21882; exemption from the requirement of a tolerance.

Residues of Aspergillus flavus NRRL 21882 are exempt from the requirement of a tolerance in or on all food and feed commodities of almond; corn, field; corn, pop; corn, sweet; peanut; and pistachio when used in accordance with label directions and good agricultural practices.

[85 FR 60370, Sept. 25, 2020]

§ 180.1255 - Bacillus pumilus strain QST 2808; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the microbial pesticide Bacillus pumilus strain QST 2808 when used in or on all agricultural commodities when applied/used in accordance with label directions.

[69 FR 63954, Nov. 3, 2004]

§ 180.1257 - Purpureocillium lilacinum strain 251; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Purpureocillium lilacinum strain 251 in or on all food commodities when applied/used in accordance with label directions and good agricultural practices.

[84 FR 70022, Dec. 20, 2019]

§ 180.1258 - Acetic acid; exemption from the requirement of a tolerance.

(a) An exemption from the requirement of a tolerance is established for residues of the biochemical pesticide acetic acid when used as a preservative on post-harvest agricultural commodities intended for animal feed, including Alfalfa, seed; alfalfa, hay; barley, grain; bermudagrass, hay; bluegrass, hay; bromegrass, hay; clover, hay; corn, field, grain; corn, pop, grain; cowpea, hay; fescue, hay; lespedeza, hay; lupin; oat, grain; orchardgrass, hay; peanut, hay; timothy, hay; vetch, hay; and wheat, grain, or commodities described as grain or hay.

(b) An exemption from the requirement of a tolerance is established for residues of acetic acid in or on all food crops resulting from unintentional spray and drift to non-target vegetation including non-food, food and feed crops when used as a non-selective contact herbicide spray.

[75 FR 40741, July 14, 2010]

§ 180.1259 - Reynoutria sachalinensis extract; exemption from the requirement of a tolerance.

Residues of the biochemical pesticide Reynoutria sachalinensis extract, when derived from the whole plant extract, are exempt from the requirement of a tolerance in or on all food commodities.

[70 FR 55277, Sept. 21, 2005]

§ 180.1260 - Muscodor albus QST 20799 and the volatiles produced on rehydration; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established on all food/feed commodities, for residues of Muscodor albus QST 20799, and the volatiles produced on its rehydration, when the pesticide is used for all agricultural applications, including seed, propagule and post harvest treatments.

[70 FR 56576, Sept. 28, 2005]

§ 180.1022 - Iodine-detergent complex; exemption from the requirement of a tolerance.

The aqueous solution of hydriodic acid and elemental iodine, including one or both of the surfactants (a) polyoxypropylene-polyoxyethylene glycol nomionic block polymers (minimum average molecular weight 1,900) and (b) α-(p- nonylphenyl)-omega- hydroxypoly (oxyethylene) having a maximum average molecular weight of 748 and in which the nonyl group is a propylene trimer isomer, is exempted from the requirement of a tolerance for residues in egg, and poultry, fat; poultry, meat; poultry, meat byproducts when used as a sanitizer in poultry drinking water.

[74 FR 26534, June 3, 2009]

§ 180.1261 - Xanthomonas campestris pv. vesicatoria and Pseudomonas syringae pv. tomato specific Bacteriophages.

An exemption from the requirement of a tolerance is established for residues of Xanthomonas campestris pv. vesicatoria and Pseudomonas syringae pv. tomato specific bacteriophages in or on pepper and tomato.

[74 FR 26536, June 3, 2009]

§ 180.1262 - Sorbitol octanoate; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of sorbitol octanoate in or on all food commodities when used in accordance with label directions.

[71 FR 4518, Jan. 27, 2006]

§ 180.1263 - Tetrahydrofurfuryl alcohol; exemption from the requirement of a tolerance.

Tetrahydrofurfuryl alcohol (THFA, CAS Reg. No. 97-99-4) is exempt from the requirement of a tolerance in or on all raw agricultural commodities when used in accordance with good agricultural practices as an inert ingredient applied only:

(a) For use as a seed treatment.

(b) For applications prior to planting and at the time of planting.

(c) For use on cotton.

(d) For use in herbicides with one application to wheat, buckwheat, barley, oats, rye, sorghum, triticale, rice, and wild rice prior to the pre-boot stage.

(e) For use in herbicides with two applications to field corn and popcorn up to 36 inches tall (V8 stage).

(f) For use in herbicides with two applications to canola prior to the early bolting stage.

(g) For use in herbicides with two applications to soybeans prior to the bloom growth stage.

[71 FR 45415, Aug. 9, 2006, as amended at 83 FR 53002, Oct. 19, 2018]

§ 180.1267 - Pantoea agglomerans strain C9-1; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Pantoea agglomerans strain C9-1 when used on apples and pears.

[71 FR 24596, Apr. 26, 2006]

§ 180.1268 - Potassium silicate; exemption from the requirement of a tolerance.

Potassium silicate is exempt from the requirement of a tolerance in or on all food commodities so long as the potassium silicate is not applied at rates exceeding 1% by weight in aqueous solution and when used in accordance with good agricultural practices.

[71 FR 34272, June 14, 2006]

§ 180.1269 - Bacillus mycoides

An exemption from the requirement of a tolerance is established for residues of Bacillus mycoides isolate J in or on all agricultural commodities when used in accordance with label directions and good agricultural practices.

[81 FR 67922, Oct. 3, 2016]

§ 180.1270 - Isophorone; exemption from the requirement of a tolerance.

Isophorone (CAS Reg. No. 78-59-1) is exempt from the requirement of a tolerance when used as an inert ingredient in pesticide formulations applied to beets, ginseng, rice, spinach, sugar beets, and Swiss chard.

[71 FR 45408, Aug. 9, 2006]

§ 180.1271 - Eucalyptus oil; exemption from the requirement of a tolerance.

An exemption from the requirement of tolerance is established for residues of eucalyptus oil in or on honey, honeycomb, and honeycomb with honey when used at 2g or less eucalyptus oil per hive, where the eucalyptus oil contains 80% or more eucalyptol.

[71 FR 53979, Sept. 13, 2006]

§ 180.1272 - Pantoea agglomerans strain E325; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Pantoea agglomerans strain E325 when used on apples and pears.

[71 FR 54933, Sept. 20, 2006]

§ 180.1023 - Propanoic acid; exemptions from the requirement of a tolerance.

(a) Postharvest application of propanoic acid or a mixture of methylene bispropionate and oxy(bismethylene) bisproprionate when used as a fungicide is exempted from the requirement of a tolerance for residues in or on the following raw agricultural commodities: Alfalfa, forage; alfalfa, hay; alfalfa, seed; barley, grain; Bermudagrass, forage; Bermudagrass, hay; bluegrass, forage; bluegrass, hay; bromegrass, forage; bromegrass, hay; clover, forage; clover, hay; corn, field, grain; corn, pop, grain; cowpea, hay; fescue, forage; fescue, hay; lespedeza, forage; lespedeza, hay; lupin; oat, grain; orchardgrass, forage; orchardgrass, hay; peanut, hay; pea, field, hay; ryegrass, Italian, hay; sorghum, grain, grain; soybean, hay; sudangrass, forage; sudangrass, hay; timothy, forage; timothy, hay; vetch, forage; vetch, hay; and wheat, grain.

(b) Propanoic acid is exempt from the requirement of a tolerance for residues in or on cattle, meat; cattle, meat byproducts; goat, meat; goat, meat byproducts; hog, meat; hog meat byproducts; horse, meat; horse, meat byproducts; sheep, meat; sheep meat byproducts; and, poultry, fat; poultry meat; poultry meat byproducts; milk, and egg when applied as a bactericide/fungicide to livestock drinking water, poultry litter, and storage areas for silage and grain.

(c) Preharvest and postharvest application of propanoic acid (CAS Reg. No. 79-09-4), propanioc acid, calcium salt (CAS Reg. No. 4075-81-4), and propanioc sodium salt (CAS Reg. No. 137-40-6) are exempted from the requirement of a tolerance on all crops when used as either an active or inert ingredient in accordance with good agricultural practice in pesticide formulations applied to growing crops, to raw agricultural commodities before and after harvest and to animals.

[69 FR 47025, Aug. 4, 2004, as amended at 74 FR 26534, June 3, 2009]

§ 180.1273 - Beauveria bassiana HF23; exemption from the requirement of a tolerance.

Residues of Beauveria bassiana HF23 are exempt from the requirement of a tolerance on all food/feed commodities, when the pesticide is used for the treatment of chicken and livestock facilities, including the treatment of chicken and livestock manure.

[75 FR 10190, Mar. 5, 2010]

§ 180.1274 - Tris (2-ethylhexyl) phosphate; exemption from the requirement of a tolerance.

Tris (2-ethylhexyl) phosphate (TEHP, CAS Reg. No. 78-42-2) is exempt from the requirement of a tolerance for residues in grain, aspirated fractions; barley, grain, barley, hay, barley, straw; wheat, grain; wheat, forage; wheat, hay; wheat, straw when used under the following conditions:

(a) The use is in accordance with good agricultural practices;

(b) Tris (2-ethylhexyl) phosphate is used as an inert ingredient in pesticide formulations with the active ingredients pinoxaden, clodinafop-propargyl, and tralkoxydium;

(c) Tris (2-ethylhexyl) phosphate is applied no more than twice per season; and

(d) The applications occur no later than the pre-boot stage (prior to formation of edible grain).

[72 FR 5624, Feb. 7, 2007, as amended at 74 FR 26536, June 3, 2009]

§ 180.1275 - Pythium oligandrum DV 74; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established on all food/feed commodities for residues of Pythium oligandrum DV 74 when the pesticide is used on food crops.

[81 FR 34907, June 1, 2016]

§ 180.1276 - Tobacco mild green mosaic tobamovirus strain U2; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Tobacco mild green mosaic tobamovirus strain U2 in or on all commodities of crop groups 17 and 18 when applied as a post-emergent herbicide and used in accordance with label directions and good agricultural practices.

[79 FR 75756, Dec. 19, 2014]

§ 180.1277 - Dibasic esters; exemption from the requirement of a tolerance.

Dibasic esters (CAS Reg. No. 95481-62-2) is exempted from the requirement of a tolerance for residues when used as an inert ingredient (solvent and/or anti-freeze) at 10% W/W or less in microencapsulated pesticide formulations with the active ingredient cyfluthrin.

[73 FR 10398, Feb. 27, 2008]

§ 180.1278 - Quillaja saponaria extract (saponins); exemption from the requirement of a tolerance.

Residues of the biochemical pesticide Quillaja saponaria extract (saponins) are exempt from the requirement of a tolerance in or on all food commodities.

[72 FR 41935, Aug. 1, 2007]

§ 180.1280 - Poly(hexamethylenebiguanide) hydrochloride (PHMB); exemption from the requirement of a tolerance.

Poly(hexamethylenebiguanide) hydrochloride (PHMB)(CAS Reg. No. 32289-58-0) is exempt from the requirement of a tolerance for residues of the antimicrobial in or on all food commodities when the residues are the result of the lawful application of a food contact surface sanitizer containing PHMB at 550 parts per million (ppm).

[73 FR 1517, Jan. 9, 2008]

§ 180.1281 - S-Abscisic Acid, (S)-5-(1-hydroxy-2,6,6-trimethyl-4-oxo-1-cyclohex-2-enyl)-3-methyl-penta-(2Z,4E)-dienoic Acid; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of S-Abscisic Acid in or on all food commodities when applied or used preharvest as a plant regulator.

[75 FR 11744, Mar. 12, 2010]

§ 180.1282 - Bacillus firmus I-1582; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established in/on all food/feed commodities, for residues of Bacillus firmus I-1582 when used as a soil application or seed treatment.

[73 FR 25528, May 7, 2008]

§ 180.1283 - (Z)-7,8-epoxy-2-methyloctadecane (Disparlure); exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of (Z)-7,8-epoxy-2-methyloctadecane on all food and feed crops that occur when it is used to treat trees, shrubs, and pastures and such use results in unintentional spray and drift to non-target vegetation including non-food, food, and feed crops. This active ingredient is also known as Disparlure.

[73 FR 33714, June 13, 2008]

§ 180.1284 - Ammonium salts of higher fatty acids (C8-C18 saturated; C8-C12 unsaturated); exemption from the requirement of a tolerance.

Ammonium salts of C8-C18 saturated and C8-C12 unsaturated higher fatty acids are exempted from the requirement of a tolerance for residues in or on all food commodities when used in accordance with good agricultural practice.

[74 FR 47457, Sept. 16, 2009]

§ 180.1025 - Xylene; exemption from the requirement of a tolerance.

Xylene is exempted from the requirement of a tolerance when used as an aquatic herbicide applied to irrigation conveyance systems in accordance with the following conditions:

(a) It is to be used only in programs of the Bureau of Reclamation, U.S. Department of Interior, and cooperating water user organizations.

(b) It is to be applied as an emulsion at an initial concentration not to exceed 750 parts per million.

(c) It is not to be applied when there is any likelihood that the irrigation water will be used as a source of raw water for a potable water system or where return flows of such treated irrigation water into receiving rivers and streams would contain residues of xylene in excess of 10 parts per million.

(d) Xylene to be used as an aquatic herbicide shall meet the requirement limiting the presence of a polynuclear aromatic hydrocarbons as listed in 21 CFR 172.250.

[38 FR 16352, June 22, 1973, as amended at 50 FR 2980, Jan. 3, 1985]

§ 180.1285 - Polyoxin D zinc salt; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for the residues of polyoxin D zinc salt in or on all food commodities when applied as a fungicide and used in accordance with good agricultural practices.

[77 FR 56133, Sept. 12, 2012]

§ 180.1287 - Extract of Chenopodium ambrosioides near ambrosioides; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for the residues of Extract of Chenopodium ambrosioides near ambrosioides when used as an insecticide/acaricide on all food commodities.

[74 FR 634, Jan. 7, 2009]

§ 180.1288 - Tristyrylphenol ethoxylates; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of poly(oxy-1,2-ethanediyl), α-[2,4,6-tris(1-phenylethyl)phenyl]-ω-hydroxy-, (CAS Reg. No. 70559-25-0) and poly(oxy-1,2-ethanediyl), α-[tris(1-phenylethyl)phenyl]-ω-hydroxy-, (CAS Reg. No. 99734-09-5) on citrus crops, group 10, when used as inert ingredients under the following conditions:

(a) They are applied post-harvest;

(b) They are used as inert ingredients in pesticide formulations with azoxystrobin and fludioxonil; and

(c) They constitute no more than 10.0% of the formulated pesticide product.

[74 FR 12625, Mar. 25, 2009]

§ 180.1289 - Candida oleophila Strain O; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for the residues of the microbial pesticide, Candida oleophila Strain O, on apples and pears when applied/used as a post-harvest biofungicide.

[74 FR 22464, May 13, 2009]

§ 180.1290 - Pasteuria usgae; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Pasteuria usgae in or on all food commodities when applied preharvest and used as a nematicide in accordance with good agricultural practices.

[75 FR 37737, June 30, 2010]

§ 180.1291 - Cold pressed neem oil; exemption from the requirement of a tolerance.

Residues of the biochemical pesticide cold pressed neem oil are exempt from the requirement of a tolerance in or on all food commodities.

[74 FR 55463, Oct. 28, 2009]

§ 180.1292 - Ulocladium oudemansii (U3 Strain); exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established in/on all food commodities for residues of Ulocladium oudemansii (U3 Strain), when applied or used pre-harvest-only, excluding applications made post-harvest or to processed commodities, as a microbial fungicide in accordance with good agricultural practices.

[74 FR 55458, Oct. 28, 2009]

§ 180.1293 - Trichoderma gamsii strain ICC 080; exemption from the requirement of a tolerance.

Trichoderma gamsii strain ICC 080 is exempted from the requirement of a tolerance in or on all food and feed commodities when applied preharvest and used in accordance with good agricultural practices.

[75 FR 8507, Feb. 25, 2010]

§ 180.1294 - Trichoderma asperellum strain ICC 012; exemption from the requirement of a tolerance.

Trichoderma asperellum strain ICC 012 is exempted from the requirement of a tolerance in or on all food and feed commodities when applied pre-harvest and used in accordance with good agricultural practices.

[75 FR 9530, Mar. 3, 2010]

§ 180.1027 - Nuclear polyhedrosis virus of Heliothis zea; exemption from the requirement of a tolerance.

(a) For the purposes of this section, the viral insecticide must be produced with an unaltered and unadulterated inoculum of the single-embedded Heliothis zea nuclear polyhedrosis virus (HzSNPV). The identity of the seed virus must be assured by periodic checks.

(b) Each lot of active ingredient of the viral insecticide shall have the following specifications:

(1) The level of extraneous bacterial contamination of the final unformulated viral insecticide should not exceed 10 7 colonies per gram as determined by an aerobic plate on trypticase soy agar.

(2) Human pathogens, e.g., Salmonella, Shigella, or Vibrio, must be absent.

(3) Safety to mice as determined by an intraperitoneal injection study must be demonstrated.

(4) Identity of the viral product, as determined by the most sensitive and standardized analytical technique, e.g., restriction endonuclease and/or SDS-PAGE analysis, must be demonstrated.

(c) Exemptions from the requirement of a tolerance are established for the residues of the microbial insecticide Heliothis zea NPV, as specified in paragraphs (a) and (b) of this section, in or on all agricultural commodities.

[60 FR 42460, Aug. 16, 1995, as amended at 74 FR 26534, June 3, 2009]

§ 180.1295 - Laminarin; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of laminarin in or on all food commodities when laminarin is applied preharvest.

[75 FR 8256, Feb. 24, 2010]

§ 180.1296 - Terpene Constituents α-terpinene, d-limonene and p-cymene, of the Extract of Chenopodium ambrosioides near ambrosioides as Synthetically Manufactured; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for the residues of the biochemical pesticide Terpene Constituents α-terpinene, d-limonene and p-cymene, of the Extract of Chenopodium ambrosioides near ambrosioides as Synthetically Manufactured when used as an insecticide/acaricide in or on all food commodities.

[75 FR 39455, July 9, 2010]

§ 180.1297 - Homobrassinolide; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for the residues of homobrassinolide in or on all food commodities when applied/used as a plant growth regulator in accordance with good agricultural practices.

[75 FR 39459, July 9, 2010]

§ 180.1298 - Trichoderma hamatum isolate 382; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Trichoderma hamatum isolate 382 in or on all food commodities when applied as a fungicide and used in accordance with good agricultural practices.

[75 FR 43076, July 23, 2010]

§ 180.1299 - Prohydrojasmon; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the biochemical pesticide prohydrojasmon (PDJ), propyl-3-oxo-2-pentylcyclo-pentylacetate, when used as a plant growth regulator in or on apple and grape pre-harvest, in accordance with label directions and good agricultural practices.

[78 FR 75257, Dec. 11, 2013]

§ 180.1300 - Potassium hypochlorite; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of potassium hypochlorite in or on all commodities.

[76 FR 11343, Mar. 2, 2011]

§ 180.1301 - Escherichia coli O157:H7 specific bacteriophages; temporary exemption from the requirement of a tolerance.

A temporary exemption from the requirement of a tolerance is established for residues of lytic bacteriophages that are specific to Escherichia coli O157:H7, sequence negative for shiga toxins I and II, and grown on atoxigenic host bacteria when used/applied on food contact surfaces in food processing plants in accordance with the terms of Experimental Use Permit (EUP) No. 74234-EUP-2. This temporary exemption expires on April 1, 2013.

[76 FR 20546, Apr. 13, 2011]

§ 180.1302 -

An exemption from the requirement of a tolerance is established for residues of sodium ferric EDTA in or on all food commodities when applied as a molluscicide and used in accordance with good agricultural practices.

[76 FR 17561, Mar. 30, 2011]

§ 180.1303 - Metarhizium anisopliae strain F52; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Metarhizium anisopliae strain F52 in or on all food commodities when applied as an insecticide, miticide, or ixodicide and used in accordance with good agricultural practices.

[76 FR 26198, May 6, 2011]

§ 180.1304 - Pseudomonas fluorescens strain CL145A; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Pseudomonas fluorescens strain CL145A in or on all food commodities when applied as a molluscicide.

[76 FR 52875, Aug. 24, 2011]

§ 180.1033 - Methoprene; exemption from the requirement of a tolerance.

Methoprene is exempt from the requirement of a tolerance in or on all food commodities when used to control insect larvae.

[68 FR 34829, June 11, 2003]

§ 180.1305 - Chromobacterium subtsugae strain PRAA4-1T; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Chromobacterium subtsugae strain PRAA4-1 T in or on all food commodities when applied as an insecticide or miticide and used in accordance with good agricultural practices.

[76 FR 55272, Sept. 7, 2011]

§ 180.1306 - Isaria fumosorosea (formerly Paecilomyces fumosoroseus) Apopka strain 97; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Isaria fumosorosea (formerly Paecilomyces fumosoroseus) Apopka strain 97 in or on all food commodities when applied as an insecticide or miticide and used in accordance with good agricultural practices.

[76 FR 59905, Sept. 28, 2011]

§ 180.1307 - Bacteriophage of Clavibacter michiganensis subspecies michiganensis; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of lytic bacteriophage of Clavibacter michiganensis subspecies michiganensis produced in Clavibacter michiganensis subspecies michiganensis in or on tomato when applied as a bactericide in accordance with good agricultural practices.

[76 FR 66192, Oct. 26, 2011]

§ 180.1308 - Bacillus amyloliquefaciens strain D747; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the microbial pesticide, Bacillus amyloliquefaciens strain D747 in or on all food commodities when used in accordance with good agricultural practices.

[77 FR 749, Jan. 6, 2012. Redesignated at 77 FR 2911, Jan. 20, 2012]

§ 180.1309 - Bacillus subtilis strain CX-9060; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the microbial pesticide Bacillus subtilis strain CX-9060, in or on all food commodities, when applied or used in accordance with good agricultural practices.

[77 FR 1637, Jan. 11, 2012]

§ 180.1310 - Trichoderma virens strain G-41; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Trichoderma virens strain G-41, in or on all food commodities, when applied as a fungicide and used in accordance with good agricultural practices.

[77 FR 4908, Feb. 1, 2012]

§ 180.1311 - Pasteuria nishizawae—Pn1; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Pasteuria nishizawae—Pn1 in or on all food commodities when applied as a nematicide and used in accordance with good agricultural practices.

[77 FR 8741, Feb. 15, 2012]

§ 180.1312 - Aureobasidium pullulans strains DSM 14940 and DSM 14941; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Aureobasidium pullulans strains DSM 14940 and DSM 14941 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[80 FR 73662, Nov. 25, 2015]

§ 180.1313 - Bacillus pumilus strain GHA 180; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Bacillus pumilus strain GHA 180 in or on all food commodities when used in accordance with good agricultural practices.

[77 FR 19112, Mar. 30, 2012]

§ 180.1314 - Killed, nonviable Streptomyces acidiscabies strain RL-110T; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of killed, nonviable Streptomyces acidiscabies strain RL-110 T in or on all food commodities when applied as a pre- or post-emergent herbicide and used in accordance with good agricultural practices.

[77 FR 35295, June 13, 2012]

§ 180.1315 - Natamycin; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for the residues of natamycin in or on mushrooms, pineapples, citrus, pome, stone fruit crop groups, avocado, kiwi, mango, and pomegranates when used in accordance with label directions and good agricultural practices.

[81 FR 58410, Aug. 25, 2016]

§ 180.1037 - Polybutenes; exemption from the requirement of a tolerance.

(a) Polybutenes are exempt from the requirement of a tolerance for residues in or on the raw agricultural commodity cotton, undelinted seed when used as a sticker agent for formulations of the attractant gossyplure (1:1 mixture of (Z,Z)- and (Z,E)-7,11-hexadecadien-1-ol acetate) to disrupt the mating of the pink bollworm.

(b) Polybutenes are exempt from the requirement of a tolerance for residues in or on the raw agricultural commodity artichoke when used as a sticker agent in multi-layered laminted controlled-release dispensers of (Z)-11-hexaadecenal to disrupt the mating of the artichoke plume moth.

[74 FR 26534, June 3, 2009]

§ 180.1316 - Pasteuria spp. (Rotylenchulus reniformis nematode)—Pr3; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Pasteuria spp. (Rotylenchulus reniformis nematode)—Pr3 in or on all food commodities when applied as a nematicide and used in accordance with label directions and good agricultural practices.

[77 FR 40276, July 9, 2012]

§ 180.1317 - Pesticide chemicals; exemption from the requirements of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Didecyl dimethyl ammonium chloride in or on broccoli resulting from the use of Didecyl dimethyl ammonium chloride as a seed treatment at a treatment concentration of 1200 ppm prior to planting by immersion.

[77 FR 47296, Aug. 8, 2012]

§ 180.1318 - 3-decen-2-one; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the biochemical pesticide, 3-decen-2-one, in or on potatoes when applied as a potato sprout inhibitor and used in accordance with label directions and good agricultural practices.

[78 FR 11766, Feb. 20, 2013]

§ 180.1319 - Banda de Lupinus albus doce (BLAD); exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for the residues of Banda de Lupinus albus doce (BLAD), a naturally occurring polypeptide from the catabolism of a seed storage protein (β-conglutin) of sweet lupines (Lupinus albus), in or on all food commodities when applied as a fungicide and used in accordance with label directions and good agricultural practices.

[78 FR 17604, Mar. 22, 2013]

§ 180.1320 - Methyl jasmonate; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of methyl jasmonate in or on all food commodities when methyl jasmonate is applied pre-harvest.

[78 FR 22794, Apr. 17, 2013]

§ 180.1321 - Complex Polymeric Polyhydroxy Acids (CPPA); exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the pesticide complex polymeric polyhydroxy acids (CPPA) in or on all food commodities, when used in accordance with label directions and good agricultural practices.

[87 FR 29053, May 12, 2022]

§ 180.1322 - Bacillus pumilus strain BU F-33; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Bacillus pumilus strain BU F-33 in or on all food commodities when applied to elicit induced systemic resistance in plants and used in accordance with label directions and good agricultural practices.

[78 FR 35149, June 12, 2013]

§ 180.1323 - Ethyl-2E,4Z-decadienoate (Pear Ester); exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the biochemical pesticide, ethyl-2E,4Z-decadienoate (pear ester), in or on all food commodities, when used in accordance with label directions and good agricultural practices.

[78 FR 53054, Aug. 28, 2013]

§ 180.1324 - GS-omega/kappa-Hxtx-Hv1a; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the pesticide GS-omega/kappa-Hxtx-Hv1a in or on all food commodities when applied or used in accordance with label directions and good agricultural practices.

[79 FR 10685, Feb. 26, 2014]

§ 180.1325 - Heat-killed Burkholderia spp. strain A396 cells and spent fermentation media exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of heat-killed Burkholderia spp. strain A396 cells and spent fermentation media in or on all food commodities when applied as a biological insecticide to agricultural crops and used in accordance with label directions and good agricultural practices.

[79 FR 15704, Mar. 21, 2014]

§ 180.1040 - Ethylene glycol; exemption from the requirement of a tolerance.

Ethylene glycol as a component of pesticide formulations is exempt from the requirement of a tolerance when used in foliar applications to peanut plants.

[43 FR 41393, Sept. 18, 1978]

§ 180.1326 - Pseudomonas fluorescens strain D7; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Pseudomonas fluorescens strain D7 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[79 FR 60750, Oct. 8, 2014]

§ 180.1327 - Tetraacetylethylenediamine (TAED) and its metabolite Diacetylethylenediamine (DAED); Exemption from the Requirement of a Tolerance.

An exemption from the requirement of a tolerance is established for residues of the pesticide, tetraacetylethylenediamine (TAED), and its metabolite diacetylethylenediamine (DAED), in or on all food commodities, when used as a fungicide and bactericide in accordance with label directions and good agricultural practices.

[87 FR 15100, Mar. 17, 2022]

§ 180.1328 - Beauveria bassiana strain ANT-03; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Beauveria bassiana strain ANT-03 in or on all food commodities, when applied as a microbial insecticide and used in accordance with label directions and good agricultural practices.

[79 FR 77396, Dec. 24, 2014]

§ 180.1329 - Bacillus subtilis strain IAB/BS03, exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Bacillus subtilis strain IAB/BS03 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[80 FR 9217, Feb. 20, 2015]

§ 180.1330 - 1-Octanol; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of 1-octanol in or on root and tuber vegetables when applied as a plant growth regulator in accordance with label directions and good agricultural practices.

[80 FR 25953, May 6, 2015]

§ 180.1331 - Trichoderma asperelloides strain JM41R; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Trichoderma asperelloides strain JM41R in or on all food commodities when used in accordance with label directions and good agricultural practices.

[80 FR 28203, May 18, 2015]

§ 180.1332 - Lavandulyl senecioate; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the arthropod pheromone, lavandulyl senecioate (5-methyl-2-(1-methylethenyl)-4-hexenyl 3-methyl-2-butonate), in or on all raw agricultural commodities when applied or used in microbeads/dispensers at a rate not to exceed 150 grams active ingredient/acre/year in accordance with good agricultural practices.

[80 FR 49171, Aug. 17, 2015]

§ 180.1333 - Potassium Salts of Hops Beta acids; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the biochemical potassium salts of hops beta acids in or on honey and honeycomb, when used for the control of Varroa mites in accordance with label directions and good agricultural practices.

[80 FR 63683, Oct. 21, 2015]

§ 180.1334 - Choline Chloride; Exemption from the Requirement of a Tolerance.

An exemption from the requirement of a tolerance is established for residues of Choline Chloride in or on all food commodities when Choline Chloride is applied pre-harvest and used in accordance with label directions and good agricultural practices.

[80 FR 78149, Dec. 16, 2015]

§ 180.1335 - Isaria fumosorosea strain FE 9901; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Isaria fumosorosea strain FE 9901 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[81 FR 47311, July 21, 2016]

§ 180.1041 - Nosema locustae; exemption from the requirement of a tolerance.

The insecticide Nosema locustae is exempted from the requirement of a tolerance for residues in or on all raw agricultural commodities.

[47 FR 21537, May 19, 1982]

§ 180.1336 - Bacillus amyloliquefaciens strain PTA-4838; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Bacillus amyloliquefaciens strain PTA-4838 in or on all food commodities.

[81 FR 41222, June 24, 2016]

§ 180.1337 - Citrus tristeza virus expressing spinach defensin proteins 2, 7, and 8; exemption from the requirement of a tolerance.

A temporary exemption from the requirement of a tolerance is established for residues of the microbial pesticide Citrus tristeza virus expressing spinach defensin proteins 2, 7, and 8 (either alone or in combinations with each other) in or on the commodities listed in fruit, citrus group 10-10, when used in accordance with the terms of Experimental Use Permit No. 88232-EUP-2. This temporary exemption from the requirement of a tolerance expires on August 31, 2023.

[85 FR 54263, Sept. 1, 2020]

§ 180.1338 - Aspergillus flavus strains TC16F, TC35C, TC38B, and TC46G; exemptions from the requirement of a tolerance.

Exemptions from the requirement of a tolerance are established for residues of Aspergillus flavus strains TC16F, TC35C, TC38B, and TC46G in or on all food and feed commodities of corn, field; corn, pop; and corn, sweet when used in accordance with label directions and good agricultural practices.

[88 FR 57900, Aug. 24, 2023]

§ 180.1339 - Spodoptera frugiperda multiple nucleopolyhedrovirus strain 3AP2; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Spodoptera frugiperda multiple nucleopolyhedrovirus strain 3AP2 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[81 FR 83706, Nov. 22, 2016]

§ 180.1340 - Muscodor albus strain SA-13 and the volatiles produced on rehydration; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Muscodor albus strain SA-13 and the volatiles produced on rehydration in or on all food commodities when used in accordance with label directions and good agricultural practices.

[81 FR 86581, Dec. 1, 2016]

§ 180.1341 - Pseudomonas chlororaphis strain AFS009; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Pseudomonas chlororaphis strain AFS009 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[82 FR 35122, July 28, 2017]

§ 180.1342 - d-Limonene; exemption from the requirement of a tolerance.

(a) An exemption from the requirement of a tolerance is established for residues of d-limonene, (4R)-1-methyl-4-(1-methylethenyl)cyclohexene, in or on all food commodities when applied as an herbicide in accordance with good agricultural practices.

(b) An exemption from the requirement of a tolerance is established for residues of d-limonene, (4R)-1-methyl-4-(1-methylethenyl)cyclohexene, in or on all food commodities when applied as an insecticide in kitchens and pantries.

[88 FR 46086, July 19, 2023]

§ 180.1343 - Tartrazine; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of tartrazine (F.D.&C. Yellow No. 5 or Acid Yellow 23), in or on all food commodities when it is used as an aquatic plant control agent.

[88 FR 46086, July 19, 2023]

§ 180.1344 - Cyclaniliprole; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for indirect and inadvertent residues of the insecticide cyclaniliprole, including its metabolites and degradates, in or on all raw agricultural commodities not listed in paragraph (a) of § 180.694, when residues are present therein as a result of subsequent uptake by crops rotated into fields where the crops in § 180.694 (a) were treated with cyclaniliprole.

[82 FR 36095, Aug. 3, 2017]

§ 180.1043 - Gossyplure; exemption from the requirement of a tolerance.

The pheromone gossyplure, a 1:1 mixture of (Z,Z)- and (Z,E)-7,11-hexadecadien-1-ol acetate) is exempt from the requirement of a tolerance in or on the raw agricultural commodity cotton, undelinted seed when applied to cotton from capillary fibers.

[74 FR 26534, June 3, 2009]

§ 180.1345 - 1-Triacontanol; exemption from the requirement of a tolerance.

Residues of the biochemical pesticide 1-Triacontanol are exempt from the requirement of a tolerance in or on all food commodities.

[82 FR 38852, Aug. 16, 2017]

§ 180.1346 - 1,3-Dibromo-5,5-Dimethylhydantoin; exemption from the requirement of a tolerance.

Residues of 1,3-dibromo-5,5-dimethylhydantoin, including its metabolites and degradates, resulting from the use of 1,3-dibromo-5,5-dimethylhydantoin in antimicrobial treatment solutions of raw agricultural commodities in treatment facilities are exempt from the requirement of a tolerance.

[82 FR 57370, Dec. 5, 2017]

§ 180.1347 - Bacillus amyloliquefaciens strain F727; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Bacillus amyloliquefaciens strain F727 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[82 FR 49747, Oct. 27, 2017]

§ 180.1348 - Bacillus subtilis strain BU1814; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Bacillus subtilis strain BU1814 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[82 FR 57873, Dec. 8, 2017]

§ 180.1350 - Bacillus licheniformis strain FMCH001; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Bacillus licheniformis strain FMCH001 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[83 FR 17498, Apr. 20, 2018]

§ 180.1351 - Bacillus subtilis strain FMCH002; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Bacillus subtilis strain FMCH002 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[83 FR 17500, Apr. 20, 2018]

§ 180.1352 - Methyl-alpha-D-mannopyranoside (Alpha methyl mannoside); exemption from the requirement of a tolerance.

Residues of the biochemical pesticide Methyl-alpha-D-mannopyranoside (alpha methyl mannoside) are exempt from the requirement of a tolerance in or on all raw agricultural commodities.

[83 FR 7619, Feb. 22, 2018]

§ 180.1353 - Lipochitooligosaccharide (LCO) SP104; exemption from the requirement of a tolerance.

Residues of the biochemical pesticide Lipochitooligosaccharide (LCO) SP104 (which has been used in accordance with label directions and good agricultural practices) are exempt from the requirement of a tolerance in or on all food commodities.

[83 FR 9442, Mar. 6, 2018]

§ 180.1354 - Flutianil; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for indirect and inadvertent residues of the fungicide flutianil, including its metabolites and degradates, in or on all food commodities not listed in § 180.697(a), when residues are present therein as a result of uptake by crops rotated into fields containing the crops in § 180.697(a) that were previously treated with flutianil.

[83 FR 12269, Mar. 21, 2018]

§ 180.1355 - Duddingtonia flagrans strain IAH 1297; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Duddingtonia flagrans strain IAH 1297 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[83 FR 19972, May 7, 2018]

§ 180.1049 - Carbon dioxide; exemption from the requirement of a tolerance.

The insecticide carbon dioxide is exempted from the requirement of a tolerance when used after harvest in modified atmospheres for stored insect control on food commodities.

[65 FR 33716, May 24, 2000]

§ 180.1356 - Extract of Swinglea glutinosa; exemption from the requirement of a tolerance.

Residues of the biochemical pesticide Extract of Swinglea glutinosa are exempt from the requirement of a tolerance in or on all food commodities when applied pre-harvest in accordance with label directions and good agricultural practices.

[83 FR 27713, June 14, 2018]

§ 180.1357 - Cerevisane (cell walls of Saccharomyces cerevisiae strain LAS117); exemption from the requirement of a tolerance.

Residues of the biochemical pesticide cerevisane (cell walls of Saccharomyces cerevisiae strain LAS117) are exempt from the requirement of a tolerance in or on all food commodities, when used in accordance with label directions and good agricultural practices.

[83 FR 39375, Aug. 9, 2018]

§ 180.1358 - Metschnikowia fructicola strain NRRL Y-27328; exemption from the requirement of a tolerance.

Residues of Metschnikowia fructicola strain NRRL Y-27328 are exempt from the requirement of a tolerance in or on the food commodities included in the following crop groups and subgroups when this pesticide chemical is used in accordance with label directions and good agricultural practices: Fruit, stone group 12-12; Fruit, small fruit vine climbing, except fuzzy kiwifruit, subgroup 13-07F; and Berry, low growing subgroup 13-07G.

[83 FR 46117, Sept. 12, 2018]

§ 180.1359 - Bacteriophage active against Erwinia amylovora; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of lytic bacteriophage active against Erwinia amylovora that are produced in Erwinia amylovora in or on apple and pear, when used in accordance with label directions and good agricultural practices.

[83 FR 46403, Sept. 13, 2018]

§ 180.1360 - Bacteriophage active against Xanthomonas citri subsp. citri; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of lytic bacteriophage active against Xanthomonas citri subsp. citri that are produced in Xanthomonas citri subsp. citri in or on food commodities included in the fruit, citrus groups 10 and 10-10, when used in accordance with label directions and good agricultural practices.

[83 FR 46405, Sept. 13, 2018]

§ 180.1361 - Pepino mosaic virus, strain CH2, isolate 1906; exemption from the requirement of a tolerance.

Residues of Pepino mosaic virus, strain CH2, isolate 1906 are exempt from the requirement of a tolerance in or on tomato when this pesticide chemical is used in accordance with label directions and good agricultural practices.

[83 FR 46407, Sept. 13, 2018]

§ 180.1362 - Beauveria bassiana strain PPRI 5339; exemption from the requirement of a tolerance.

Residues of Beauveria bassiana strain PPRI 5339 are exempt from the requirement of a tolerance in or on all food commodities when this pesticide chemical is used in accordance with label directions and good agricultural practices.

[83 FR 47076, Sept. 18, 2018]

§ 180.1363 - Bacillus amyloliquefaciens strain ENV503; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Bacillus amyloliquefaciens strain ENV503 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[83 FR 58508, Nov. 20, 2018]

§ 180.1364 - Chlorate; exemption from the requirement of a tolerance.

Residues of chlorate in or on tomato and cantaloupe are exempt from the requirement of a tolerance when resulting from the application of gaseous chlorine dioxide as a fungicide, bactericide, and antimicrobial pesticide.

[83 FR 66143, Dec. 26, 2018]

§ 180.1365 - Bacteriophage active against Xylella fastidiosa; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of lytic bacteriophage active against Xylella fastidiosa in or on all food commodities when the bacteriophage are sequenced and have sequences free of toxins and lysogenic genes and are used in accordance with label directions and good agricultural practices.

[84 FR 16791, Apr. 23, 2019]

§ 180.1050 - Nitrogen; exemption from the requirements of a tolerance.

The insecticide nitrogen is exempted from the requirements of a tolerance when used after harvest in modified atmospheres for stored product insect control on all food commodities.

[65 FR 33716, May 24, 2000]

§ 180.1366 - 24-Epibrassinolide; exemption from the requirement of a tolerance.

Residues of the plant growth regulator 24-epibrassinolide in or on all food commodities are exempt from the requirement of a tolerance, when used in accordance with label directions and good agricultural practices.

[84 FR 27968, June 17, 2019]

§ 180.1367 - Bacillus amyloliquefaciens subspecies plantarum strain FZB42; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Bacillus amyloliquefaciens subspecies plantarum strain FZB42 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[84 FR 28237, June 18, 2019]

§ 180.1368 - Clonostachys rosea strain CR-7; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Clonostachys rosea strain CR-7 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[84 FR 40271, Aug. 14, 2019]

§ 180.1369 - Autographa californica multiple nucleopolyhedrovirus strain FV#11; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Autographa californica multiple nucleopolyhedrovirus strain FV#11 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[84 FR 38562, Aug. 7, 2019]

§ 180.1370 - Lipochitoolgiosaccharide (LCO) MOR116; exemption from the requirement of a tolerance.

Residues of the plant growth regulator Lipochitoolgiosaccharide (LCO) MOR116 in or on all food commodities are exempt from the requirement of a tolerance, when used in accordance with label directions and good agricultural practices.

[84 FR 43705, Aug. 22, 2019]

§ 180.1371 - Florpyrauxifen-benzyl; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of florpyrauxifen-benzyl, including its metabolites and degradates, in or on all food and feed commodities, when it is applied as an herbicide in accordance with good agricultural practices.

[84 FR 50766, Sept. 26, 2019]

§ 180.1372 - Sodium lauryl sulfate; exemption from the requirement of a tolerance.

Residues of the fungicide and miticide sodium lauryl sulfate (CAS No. 151-21-3) in or on all food commodities are exempt from the requirement of a tolerance, when used in accordance with label directions and good agricultural practices.

[84 FR 52372, Oct. 2, 2019]

§ 180.1373 - Chrysodeixis includens nucleopolyhedrovirus isolate #460; exemption from the requirement of a tolerance.

Residues of Chrysodeixis includens nucleopolyhedrovirus isolate #460 are exempt from the requirement of a tolerance in or on all food commodities, when used in accordance with label directions and good agricultural practices.

[85 FR 13548, Mar. 9, 2020]

§ 180.1374 - Autographa californica multiple nucleopolyhedrovirus strain R3; exemption from the requirement of a tolerance.

Residues of Autographa californica multiple nucleopolyhedrovirus strain R3 are exempt from the requirement of a tolerance in or on all food commodities when used in accordance with label directions and good agricultural practices.

[85 FR 20187, Apr. 10, 2020]

§ 180.1375 - Methyl mercaptan; exemption from the requirement of a tolerance.

Residues of methyl mercaptan are exempt from the requirement of a tolerance in or on all food commodities, when methyl mercaptan is used as a gopher repellent in irrigation lines in accordance with label directions and good agricultural practices.

[85 FR 29633, May 18, 2020]

§ 180.1052 - 2,2,5-trimethyl-3-dichloroacetyl-1,3-oxazolidine; exemption from the requirement of a tolerance.

2,2,5-trimethyl-3-dichloroacetyl-1,3-oxazolidine is exempted from the requirement of a tolerance when used as an inert ingredient in formulations of the herbicides S-ethyl dipropylthiocarbamate, S-propyl dipropylthiocarbamate, and S-ethyl diisobutylthiocarbamate applied to corn fields before the corn plants emerge from the soil with a maximum of 0.5 pound of the inert ingredient per acre.

[45 FR 51201, Aug. 1, 1980]

§ 180.1376 - Ea peptide 91398; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Ea peptide 91398 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[85 FR 34361, June 4, 2020]

§ 180.1378 - Trichoderma atroviride strain SC1; exemption from the requirement of a tolerance.

Residues of Trichoderma atroviride strain SC1 are exempt from the requirement of a tolerance in or on all food commodities when used in accordance with label directions and good agricultural practices.

[85 FR 46004, July 31, 2020]

§ 180.1379 - Trichoderma asperellum, strain T34; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Trichoderma asperellum, strain T34 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[85 FR 60368, Sept. 25, 2020]

§ 180.1380 - Pseudomonas fluorescens strain ACK55; exemption from the requirement of a tolerance.

Residues of Pseudomonas fluorescens strain ACK55 are exempt from the requirement of a tolerance in or on all food commodities when used in accordance with label directions and good agricultural practices.

[86 FR 56653, Oct. 12, 2021]

§ 180.1381 - Oxalic Acid; exemption from the requirement of a tolerance.

Residues of oxalic acid in or on honey and honeycomb are exempted from the requirement of a tolerance when oxalic acid is used as a miticide in honeybee hives.

[86 FR 10835, Feb. 23, 2021]

§ 180.1382 - Purpureocillium lilacinum strain PL11; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Purpureocillium lilacinum strain PL11 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[86 FR 31950, June 16, 2021]

§ 180.1383 - Bacillus velezensis strain RTI301; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Bacillus velezensis strain RTI301 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[86 FR 34147, June 29, 2021]

§ 180.1384 - Bacillus subtilis strain RTI477; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Bacillus subtilis strain RTI477 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[86 FR 34145, June 29, 2021]

§ 180.1385 - Methylorubrum populi strain NLS0089; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Methylorubrum populi strain NLS0089 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[86 FR 62928, Nov. 15, 2021]

§ 180.1386 - Bacillus subtilis strain AFS032321; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Bacillus subtilis strain AFS032321 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[87 FR 20721, Apr. 8, 2022]

§ 180.1387 - Kosakonia cowanii strain SYM00028; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Kosakonia cowanii strain SYM00028 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[86 FR 70982, Dec. 14, 2021]

§ 180.1054 - Calcium hypochlorite; exemptions from the requirement of a tolerance.

(a) Calcium hypochlorite is exempted from the requirement of a tolerance when used preharvest or postharvest in solution on all raw agricultural commodities.

(b) Calcium hypochlorite is exempted from the requirement of a tolerance in or on grape when used as a fumigant postharvest by means of a chlorine generator pad.

[59 FR 59165, Nov. 16, 1994, as amended at 74 FR 26534, June 3, 2009]

§ 180.1388 - Bacillus subtilis strain CH3000; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Bacillus subtilis strain CH3000 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[87 FR 7953, Feb. 11, 2022]

§ 180.1389 - Bacillus paralicheniformis strain CH2970; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Bacillus paralicheniformis strain CH2970 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[87 FR 7955, Feb. 11, 2022]

§ 180.1390 - Trichoderma harzianum strain T-78; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Trichoderma harzianum strain T-78 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[86 FR 70980, Dec. 14, 2021]

§ 180.1391 - Saccharomyces cerevisiae strain LAS02; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Saccharomyces cerevisiae strain LAS02 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[87 FR 5711, Feb. 2, 2022]

§ 180.1392 - Streptomyces sp. strain SYM00257; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Streptomyces sp. strain SYM00257 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[87 FR 29058, May 12, 2022]

§ 180.1393 - Methylorubrum extorquens strain NLS0042; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Methylorubrum extorquens strain NLS0042 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[87 FR 44002, July 25, 2022]

§ 180.1394 - Lysate of Willaertia magna C2c Maky; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the pesticide, lysate of Willaertia magna C2c Maky, in or on all food commodities, when used in accordance with label directions.

[87 FR 61537, Oct. 12, 2022]

§ 180.1395 - Eugenol; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for eugenol (2-methoxy-4-(-2-propenyl)phenol) in or on all food commodities when used in accordance with good agricultural practices.

[87 FR 56898, Sept. 16, 2022]

§ 180.1396 - Extract of Caesalpinia spinosa; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for extract of Caesalpinia spinosa in or on all food commodities when used in accordance with good agricultural practices.

[88 FR 993, Jan. 6, 2023]

§ 180.1397 - Trichoderma atroviride strain K5 NRRL B-50520; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Trichoderma atroviride strain K5 NRRL B-50520 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[89 FR 57773, July 16, 2024]

§ 180.1056 - Boiled linseed oil; exemption from requirement of tolerance.

Boiled linseed oil (containing no more than 0.33 percent manganese naphthenate and no more than 0.33 percent cobalt naphthenate) is exempt from the requirement of a tolerance when used as a coating agent for S-ethyl hexahydro-1H-azepine-1-carbothioate. No more than 15 percent of the pesticide formulation may consist of “boiled linseed oil.” This exemption is limited to use on rice before edible parts form.

[46 FR 33270, June 29, 1981]

§ 180.1398 - Peptide Derived from Harpin Protein (PDHP) 25279; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Peptide Derived from Harpin Protein (PDHP) 25279 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[88 FR 8236, Feb. 8, 2023]

§ 180.1399 -

An exemption from the requirement of a tolerance is established for residues of Bacteriophage active against Pseudomonas syringae pv. syringae in or on all food commodities when used in accordance with label directions and good agricultural practices.

[88 FR 15619, Mar. 14, 2023]

§ 180.1400 - Bacteriophage active against Xanthomonas arboricola pv. corylina; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Bacteriophage active against Xanthomonas arboricola pv. corylina in or on all food commodities when used in accordance with label directions and good agricultural practices.

[88 FR 15619, Mar. 14, 2023]

§ 180.1401 - Bacteriophage active against Xanthomonas arboricola pv. juglandis; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Bacteriophage active against Xanthomonas arboricola pv. juglandi in or on all food commodities when used in accordance with label directions and good agricultural practices.

[88 FR 15619, Mar. 14, 2023]

§ 180.1402 - Bacteriophage active against Xanthomonas arboricola pv. pruni; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Bacteriophage active against Xanthomonas arboricola pv. pruni in or on all food commodities when used in accordance with label directions and good agricultural practices.

[88 FR 15619, Mar. 14, 2023]

§ 180.1403 - Ledprona double-stranded RNA (CAS# 2433753-68-3); exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Ledprona dsRNA in or on potato when used as a foliar-applied insecticide for the selective control of Colorado potato beetle and in accordance with label directions and good agricultural practices.

[88 FR 69043, Oct. 5, 2023]

§ 180.1404 - (2S)-5-Oxopyrrolidine-2-carboxylic Acid (L-PCA); exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the pesticide, (2S)-5-Oxopyrrolidine-2-carboxylic Acid (L-PCA) in or on all food commodities when used as a plant growth regulator in accordance with label directions and good agricultural practices.

[88 FR 54247, Aug. 10, 2023]

§ 180.1405 - Flg22-Bt Peptide; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Flg22-Bt Peptide in or on all food commodities when used as a plant regulator and inducer of local and systemic resistance in accordance with label directions and good agricultural practices.

[88 FR 53809, Aug. 9, 2023]

§ 180.1406 - U1-AGTX-Ta1b-QA protein; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of U1-AGTX-Ta1b-QA protein in or on all food commodities when used in accordance with label directions and good agricultural practices.

[89 FR 9776, Feb. 12, 2024]

§ 180.1057 - Phytophthora palmivora; exemption from requirement of tolerance.

Phytophthora palmivora is exempted from the requirement of a tolerance in or on the raw agricultural commodity fruit, citrus.

[74 FR 26534, June 3, 2009]

§ 180.1407 - Gluconobacter cerinus strain BC18B and Hanseniaspora uvarum strain BC18Y; exemptions from the requirement of a tolerance.

Exemptions from the requirement of tolerances are established for residues of Gluconobacter cerinus strain BC18B and Hanseniaspora uvarum strain BC18Y in or on all food commodities when used in accordance with label directions and good agricultural practices.

[89 FR 57775, July 16, 2024]

§ 180.1408 - Bacillus velezensis strain 11604; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Bacillus velezensis strain 11604 in or on all food and feed commodities when used in accordance with label directions and good agricultural practices.

[89 FR 54723, July 2, 2024]

§ 180.1409 - Trichoderma atroviride strain AT10; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Trichoderma atroviride strain AT10 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[89 FR 59648, July 23, 2024]

§ 180.1410 - Bacillus paralicheniformis strain CH0273; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Bacillus paralicheniformis strain CH0273 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[89 FR 65548, Aug. 12, 2024]

§ 180.1411 - Bacillus subtilis strain CH4000; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Bacillus subtilis strain CH4000 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[89 FR 65550, Aug. 12, 2024]

§ 180.1412 - Bacillus licheniformis strain 414-01; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Bacillus licheniformis strain 414-01 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[89 FR 68114, Aug. 23, 2024]

§ 180.1413 - Potassium Carbonate; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of potassium carbonate in or on all food commodities when used as a biochemical fungicide in or on all agricultural food commodities in accordance with label directions and good agricultural practices.

[89 FR 63296, Aug. 5, 2024]

§ 180.1058 - Sodium diacetate; exemption from the requirement of a tolerance.

Sodium diacetate, when used postharvest as a fungicide, is exempt from the requirement of a tolerance for residues in or on alfalfa, hay; Bermudagrass, hay; bluegrass, hay; bromegrass, hay; clover,hay; corm, field, grain; corn, pop, grain; oat, grain; orchardgrass, hay; sorghum, grain, grain; sudangrass, hay; ryegrass, Italian, hay; timothy, hay.

[74 FR 26534, June 3, 2009]

§ 180.1064 - Tomato pinworm insect pheromone; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for combined residues of both components of the tomato pinworm insect pheromone (E)-4-tridecen-1-yl acetate and (Z)-4-tridecen-1-yl acetate in or on all raw agricultural commodities (preharvest) in accordance with the following prescribed conditions:

(a) Application shall be limited solely to point source dispensers or point source chopped fibers containing the tomato pinworm insect pheromone.

(b) Cumulative yearly application cannot exceed 200 grams of tomato pinworm pheromone per acre.

[58 FR 34376, June 25, 1993]

§ 180.1065 - 2-Amino-4,5-dihydro-6-methyl-4-propyl-s-triazolo(1,5-alpha)pyrimidin-5-one; exemption from the requirement of a tolerance.

The inert ingredient, 2-amino-4,5-dihydro-6-methyl-4-propyl-s-triazolo(1,5-alpha)pyrimidin-5-one is exempted from the requirement of a tolerance when used as an emetic at not more than 0.3 percent in formulations of paraquat dichloride. Further restrictions on this exemption are that this ingredient may not be advertised as an emetic and the paraquat product may not be promoted in any way because of the inclusion of this inert ingredient.

[70 FR 46431, Aug. 10, 2005]

§ 180.1067 - Methyl eugenol and malathion combination; exemption from the requirement of a tolerance.

The insect attractant methyl eugenol and the insecticide malathion are exempt from the requirement of tolerances on all raw agricultural commodities when used in combination in Oriental fruit fly eradication programs under the authority of the U.S. Department of Agriculture, in accordance with the following directions and specifications:

(a) The combination shall be at the ratio of three parts methyl eugenol to one part technical malathion (3:1).

(b) This combination is to be impregnated on a carrier (cigarette filter tips (cellulose acetate); cotton strings; fiberboard squares) or mixed with a jel cleared under 40 CFR 180.920 or 180.950.

(c) The maximum actual dosage per application per acre shall be 28.35 grams (one ounce avoirdupois) methyl eugenol and 9.45 grams (one-third (0.33) ounce avoirdupois) technical malathion.

[47 FR 9002, Mar. 3, 1982, as amended at 69 FR 23142, Apr. 28, 2004]

§ 180.1068 - C12-C18 fatty acid potassium salts; exemption from the requirement of a tolerance.

C12-C18 fatty acids (saturated and unsaturated) potassium salts are exempted from the requirement of a tolerance for residues in or on all raw agricultural commodities when used in accordance with good agricultural practice.

[60 FR 34871, July 5, 1995]

§ 180.1069 - (Z)-11-Hexadecenal; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the biological insecticide (pheromone) (Z)-11-hexadecenal when used as a sex attractant on artichoke plants to control the artichoke plume moth.

[47 FR 14906, Apr. 7, 1982]

§ 180.1070 - Sodium chlorite; exemption from the requirement of a tolerance.

Sodium chlorite is exempted from the requirement of a tolerance for residues when used in accordance with good agricultural practice as a seed-soak treatment in the growing of the raw agricultural commodities vegetable, brassica, leafy, group 5 and radish, roots and radish, tops.

[74 FR 26534, June 3, 2009]

§ 180.1071 - Peanuts, Tree Nuts, Milk, Soybeans, Eggs, Fish, Crustacea, and Wheat; exemption from the requirement of a tolerance.

(a) General. Residues resulting from the following uses of the food commodity forms of peanuts, tree nuts, milk, soybeans, eggs (including putrescent eggs), fish, crustacea, and wheat are exempted from the requirement of a tolerance in or on all food commodities under FFDCA section 408 (when used as either an inert or an active ingredient in a pesticide formulation), if such use is in accordance with good agricultural practices:

(1) Use in pesticide products intended to treat seeds.

(2) Use in nursery and greenhouse operations, as defined in 40 CFR 170.3, which includes seeding, potting and transplanting activities.

(3) Pre-plant and at-transplant applications.

(4) Incorporation into seedling and planting beds.

(5) Applications to cuttings and bare roots.

(6) Applications to the field that occur after the harvested crop has been removed.

(7) Soil-directed applications around and adjacent to all plants.

(8) Applications to rangelands, which is land, mostly grasslands, whose plants can provide food (i.e., forage) for grazing or browsing animals.

(9) Use in chemigation and irrigation systems (via flood, drip, or furrow application with no overhead spray applications).

(10) Application as part of a dry fertilizer on which an active ingredient is impregnated.

(11) Aerial and ground applications that occur when no above-ground harvestable food commodities are present (usually pre-bloom).

(12) Application as part of an animal feed-through product.

(13) Applications as gel and solid (non-liquid/non-spray) crack and crevice treatments that place the gel or bait directly into or on top of the cracks and crevices via a mechanism such as a syringe.

(14) Applications to the same crop from which the food commodity is derived, whether the plant fraction(s) intended for harvest are present or not, e.g., applications of peanut meal when applied to peanut plants.

(b) Specific chemical substances. Residues resulting from the use of the following substances as either an inert or an active ingredient in a pesticide formulation are exempted from the requirement of a tolerance under FFDCA section 408, if such use is in accordance with good agricultural practices and such use is included in paragraph (a):

Chemical Substance CAS No. Caseins9000-71-9 Caseins, ammonium complexes9005-42-9 Caseins, hydrolyzates65072-00-6 Caseins, potassium complexes68131-54-4 Caseins, sodium complexes9005-46-3
[70 FR 1360, Jan. 7, 2005]

§ 180.1072 - Poly-D-glucosamine (chitosan); exemption from the requirement of a tolerance.

(a) An exemption from the requirement of a tolerance is established for residues of the biological plant growth regulator poly-D-glucosamine when used as a seed treatment in or on barley, beans, oats, peas, rice, and wheat.

(b) An exemption from the requirement of a tolerance is established for residues of the biological plant growth regulator poly-D-glucosamine when used as a pesticide in the production any raw agricultural commodity.

[60 FR 19524, Apr. 19, 1995]

§ 180.1073 - Isomate-M; exemption from the requirement of a tolerance.

The oriental fruit moth pheromone (Isomate-M) (Z-8-dodecen-l-yl acetate, E-8-dodecen-l-yl acetate, Z-8-dodecen-l-ol) is exempt from the requirement of a tolerance in or on all the raw agricultural commodities (food and feed) including, peach; quince; nectarine; and nut, macadamia when used in orchards with encapsulated polyethylene tubing to control oriental fruit moth.

[74 FR 26534, June 3, 2009]

§ 180.1074 - F.D.&amp;C. Blue No. 1; exemption from the requirement of a tolerance.

F.D.&C. Blue No. 1 is exempted from the requirement of a tolerance when used as an aquatic plant control agent.

[47 FR 25963, June 16, 1982]

§ 180.1075 - Colletotrichum gloeosporioides f. sp. aeschynomene; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the mycoherbicide Colletotrichum gloeosporioides f. sp. aeschynomene in or on the following raw agricultural commodities:

Commodity Aspirated grain fractions Rice, grain Soybean, forage Soybean, hay Soybean, seed [47 FR 25742, June 15, 1982, as amended at 74 FR 26534, June 3, 2009]

§ 180.1076 - Viable spores of the microorganism Bacillus popilliae; exemption from the requirement of a tolerance.

(a) For the purposes of this section the microbial insecticide for which exemption from the requirement of a tolerance is being established shall have the following specifications:

(1) The microorganism shall be an authentic strain of Bacillus popilliae conforming to the morphological and biochemical characteristics of Bacillus popilliae as described in Bergey's Manual of Determinative Bacteriology, Eighth Edition.

(2) Spore preparations of Bacillus popilliae shall be produced by an extraction process from diseased Japanese beetles, and may contain a small percentage of the naturally occurring milky disease bacterium Bacillus lentimorbus.

(3) Each lot of spore preparation, prior to the addition of other materials, shall be tested by subcutaneous injection of at least 1 million spores into each of five laboratory test mice weighing 17 grams to 23 grams. Such test shall show no evidence of infection of injury in the test animals when observed for 7 days following injection.

(b) Exemption from the requirement of a tolerance is established for residues of the microbial insecticide Bacillus popilliae, as specified in paragraph (a) of this section in or on grass, pasture, forage and grass, rangeland, forage when it is applied to growing crops in accordance with good agricultural practices.

[47 FR 38535, Sept. 1, 1982, as amended at 74 FR 26535, June 3, 2009]

§ 180.1080 - Plant volatiles and pheromone; exemptions from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the plant volatiles cyclic decadiene, cyclic decene, cyclic pentadecatriene, and decatriene and the pheromone Z-2-isopropenyl-1-methylcyclobutaneethanol; Z-3,3-dimethyl-Δ1,β-cyclohexaneethanol; Z-3,3-dimethyl-Δ1,α-cyclohexaneethanal; E-3,3-dimethyl-Δ1,α-cyclohexaneethanal combination when applied to cotton in hollow synthetic fibers.

[48 FR 28442, June 22, 1983]

§ 180.1083 - Dimethyl sulfoxide; exemption from the requirement of a tolerance.

Dimethyl sulfoxide (DMSO) [CAS Registry Number 67-68-5] is exempted from the requirement of a tolerance when used as an inert solvent or cosolvent in formulations with the following pesticides when used in accordance with good agricultural practices in or on the following raw agricultural commodities:

(a) Carbaryl (1-naphthyl methyl-carbamate)

Pea, dry, seed Pea, succulent

(b) O-O-Diethyl O-(2-isopropyl-6-methyl-4-pyrimidinyl) phosphorothioate

Pea, dry, seed Pea, succulent [48 FR 54819, Dec. 7, 1983, as amended at 74 FR 26535, June 3, 2009]

§ 180.1084 - Monocarbamide dihydrogen sulfate; exemption from the requirement of a tolerance.

Monocarbamide dihydrogen sulfate is exempted from the requirement of a tolerance when used as a herbicide or desiccant in or on all raw agricultural commodities.

[53 FR 12152, Apr. 13, 1988]

§ 180.1086 - 3,7,11-Trimethyl-1,6,10-dodecatriene-1-ol and 3,7,11-trimethyl-2,6,10-dodecatriene-3-ol; exemption from the requirement of a tolerance.

The insect pheromone containing the active ingredients 3,7,11-trimethyl-1,6,10-dodecatriene-1-ol and 3,7,11-trimethyl-2,6,10-dodecatriene-3-ol is exempted from the requirement of a tolerance in or on all raw agricultural commodities.

[52 FR 12165, Apr. 15, 1987; 52 FR 29014, Aug. 5, 1987]

§ 180.1087 - Sesame stalks; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the biorational nematicide sesame stalk in or on the following raw agricultural commodities: Almond; almond, hulls; cotton, undelinted seed; cotton, gin byproducts; soybean, seed; soybean, forage; soybean, hay; aspirated grain fractions; potato; beet, sugar, roots; beet, sugar, tops; tomato; pepper, bell; squash; strawberry; eggplant; cucumber; carrot, roots; radish, roots; radish, top; turnip, roots; turnip, tops; onion; pea, dry; pea, succulent; melon; grape; walnut; orange; grapefruit; mulberry; peach; apple; apricot; blackberry; loganberry; pecan; cherry; plum, and cranberry.

[74 FR 26535, June 3, 2009]

§ 180.1089 - Poly-N-acetyl-D-glucosamine; exemption from the requirement of tolerance.

An exemption from the requirement of a tolerance is established for residues of the biochemical nematicide poly-N-acetyl-D-glucosamine on a variety of agricultural crops.

[53 FR 10249, Mar. 30, 1988]

§ 180.1090 - Lactic acid, including l-lactic acid; exemption from the requirement of a tolerance.

(a) Lactic acid (2-hydroxypropanoic acid), including l-lactic acid is exempted from the requirement of a tolerance when used as a plant growth regulator or fruit and vegetable wash in or on all raw agricultural commodities.

(b) An exemption from the requirement of a tolerance is established for indirect or inadvertent residues of lactic acid (2-hydroxypropanoic acid), including l-lactic acid, in or on all livestock commodities, when residues are present therein as a result of animal drinking water coming into contact with hard non-porous surfaces treated with lactic acid (i.e., troughs).

[89 FR 70109, Aug. 29, 2024]

§ 180.1091 - Aluminum isopropoxide and aluminum secondary butoxide; exemption from the requirement of a tolerance.

Aluminum isopropoxide (CAS Reg. No. 555-31-7) and aluminum secondary butoxide (CAS Reg. No. 2269-22-9) are exempted from the requirement of a tolerance when used in accordance with good agricultural practices as stabilizers in formulations of the insecticide amitraz [N′-(2,4-dimethylphenyl)-N-[[(2,4-dimethylphenyl)imino]-N-methylmethanimidamide] applied to growing crops or animals.

[53 FR 34509, Sept. 7, 1988; 53 FR 36696, Sept. 21, 1988]

§ 180.1092 - Menthol; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the pesticidal chemical menthol in or on honey and honeycomb when used in accordance with good agricultural practice in over-wintering bee hives.

[74 FR 26535, June 3, 2009]

§ 180.1095 - Chlorine gas; exemptions from the requirement of a tolerance.

Chlorine gas is exempted from the requirement of a tolerance when used preharvest or postharvest in solution on all raw agricultural commodities.

[56 FR 21309, May 8, 1991]

§ 180.1097 - GBM-ROPE; exemption from the requirement of a tolerance.

The grape berry moth pheromone (GBM-ROPE) containing the active ingredients (Z)-9-dedecenyl acetate and (Z)-11-tetradecenyl acetate is exempt from the requirement of a tolerance in or on the raw agricultural commodity grape when used in orchards with encapsulated polyethylene tubing to control grape berry moth.

[74 FR 26535, June 3, 2009]

§ 180.1098 - Gibberellins [Gibberellic Acids (GA3 and GA4 + GA7), and Sodium or Potassium Gibberellate]; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of gibberellins [gibberellic acids (GA3 and GA4 + GA7), and sodium or potassium gibberellate] in or on all food commodities when used as plant regulators on plants, seeds, or cuttings and on all food commodities after harvest in accordance with good agricultural practices.

[64 FR 31505, June 11, 1999]

§ 180.1100 - Gliocladium virens isolate GL-21; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the biofungicide Gliocladium virens GL-21 in or on all raw agricultural commodities when used either as a fungicide for inoculation of plant growth media in greenhouses or on terrestrial food crops grown outdoors in accordance with good agricultural practices.

[60 FR 48659, Sept. 20, 1995; 60 FR 52248, Oct. 5, 1995]

§ 180.1101 - Parasitic (parasitoid) and predatory insects; exemption from the requirement of a tolerance.

Parasitic (parasitoid) and predatory insects are exempted from the requirement of a tolerance for residues when they are used in accordance with good agricultural and pest control practices to control insect pests of stored raw whole grains such as corn, small grains, rice, soybeans, peanuts, and other legumes either bulk or warehoused in bags. For the purposes of this rule, the parasites (parasitoids) and predators are considered to be species of Hymenoptera in the genera Trichogramma, Trichogrammatidae; Bracon, Braconidae; Venturia, Mesostenus, Ichneumonidae; Anisopteromalus, Choetospila, Lariophagus, Dibrachys, Habrocytus, Pteromalus, Pteromalidae; Cephalonomia, Holepyris, Laelius, Bethylidae; and of Hemiptera in the genera Xylocoris, Lyctocoris, and Dufouriellus, Anthocoridae. Whole insects, fragments, parts, and other residues of these parasites and predators remain subject to 21 U.S.C. 342(a)(3).

[57 FR 14646, Apr. 22, 1992]

§ 180.1102 - Trichoderma harzianum KRL-AG2 (ATCC #20847) strain T-22; exemption from requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the biofungicide Trichoderma harzianum KRL-AG2 (ATCC #20847); also known as strain T-22 when applied in/or on all food commodities.

[64 FR 16860, Apr. 7, 1999]

§ 180.1103 - Isomate-C; exemption from the requirement of a tolerance.

The codling moth pheromone (Isomate-C) E,E-8,10-dodecenyl alcohol, dodecanol, tetradecanol is exempt from the requirements of a tolerance in or on all raw agricultural commodities when formulated in polyethylene pheromone dispensers for use in orchards with encapsulated polyethylene tubing to control codling moth.

[74 FR 26535, June 3, 2009]

§ 180.1110 - 3-Carbamyl-2,4,5-trichlorobenzoic acid; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for the residues of 3-carbamyl-2,4,5-trichlorobenzoic acid in or on all raw agricultural commodities which occur from the direct application of chlorothalonil to crops in § 180.275 (a) and (b) and/or as an inadvertent residue resulting from the soil metabolism of chlorothalonil when applied to crops in § 180.275 (a) and (b), and subsequent uptake by rotated crops when used according to approved agricultural practices.

[57 FR 24552, June 10, 1992]

§ 180.1111 - Bacillus subtilis GB03; exemption from the requirement of a tolerance.

The biofungicide Bacillus subtilis GB03 is exempted from the requirement of a tolerance in or on all raw agricultural commodities when used in accordance with good agricultural practices.

[73 FR 50556, Aug. 27, 2008]

§ 180.1114 - Pseudomonas fluorescens A506, Pseudomonas fluorescens 1629RS, and Pseudomonas syringae 742RS; exemptions from the requirement of a tolerance.

The biological pesticides Pseudomonas fluorescens A506, Pseudomonas fluorescens 1629RS, and Pseudomonas syringae 742RS are exempted from the requirement of a tolerance in or on all raw agricultural commodities when applied as a frost protection agent or biological control agent to growing agricultural crops in accordance with good agricultural practices.

[57 FR 42700, Sept. 16, 1992]

§ 180.1118 - Spodoptera exigua nuclear polyhedrosis virus; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for the microbial pest control agent Spodoptera exigua nuclear polyhedrosis virus when used as a pesticide control agent on all raw agricultural commodities.

[58 FR 25784, Apr. 28, 1993]

§ 180.1119 - Azadirachtin; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for the biochemical azadirachtin, which is isolated from the berries of the Neem tree (Azadirachta indica), when used as a pesticide at 20 grams or less per acre on all raw agricultural commodities.

[58 FR 8696, Feb. 17, 1993]

§ 180.1120 - Streptomyces sp. strain K61; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of Streptomyces sp. strain K61 in or on all food commodities when used in accordance with label directions and good agricultural practices.

[87 FR 51914, Aug. 24, 2022]

§ 180.1121 - Boric acid and its salts, borax (sodium borate decahydrate), disodium octaborate tetrahydrate, boric oxide (boric anhydride), sodium borate and sodium metaborate; exemptions from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the pesticidal chemical boric acid and its salts, borax (sodium borate decahydrate), disodium octaborate tetrahydrate, boric oxide (boric anhydride), sodium borate and sodium metaborate, in or on raw agricultural commodities when used as an active ingredient in insecticides, herbicides, or fungicides preharvest or postharvest in accordance with good agricultural practices.

[58 FR 44283, Aug. 20, 1993]

§ 180.1122 - Inert ingredients of semiochemical dispensers; exemptions from the requirement of a tolerance.

(a) All inert ingredients of semiochemical dispenser products formulated with, and/or contained in, dispensers made of polymeric matrix materials (including the monomers, plasticizers, dispersing agents, antioxidants, UV protectants, stabilizers, and other inert ingredients) are exempted from the requirement of a tolerance when used as carriers in pesticide formulations for application to growing crops only. These dispensers shall conform to the following specifications:

(1) Exposure must be limited to inadvertent physical contact only. The design of the dispenser must be such as to preclude any contamination by its components of the raw agricultural commodity (RAC) or processed foods/feeds derived from the commodity by virtue of its proximity to the RAC or as a result of its physical size.

(2) The dispensers must be applied discretely. This exemption does not apply to components of semiochemical formulations applied in a broadcast manner either to a crop field plot or to individual plants.

(b) A semiochemical dispenser is a single enclosed or semi-enclosed unit that releases semiochemical(s) into the surrounding atmosphere via volatilization and is applied in a manner to provide discrete application of the semiochemical(s) into the environment.

(c) Semiochemicals are chemicals that are emitted by plants or animals and modify the behavior of receiving organisms. These chemicals must be naturally occurring or substantially identical to naturally occurring semiochemicals.

[58 FR 64494, Dec. 8, 1993]

§ 180.1124 - Arthropod pheromones; exemption from the requirement of a tolerance.

Arthropod pheromones, as described in § 152.25(b) of this chapter, when used in retrievably sized polymeric matrix dispensers are exempt from the requirement of a tolerance in or on all raw agricultural commodities when applied to growing crops only at a rate not to exceed 150 grams active ingredient/acre/year in accordance with good agricultural practices.

[59 FR 14759, Mar. 30, 1994]

§ 180.1126 - Codlure, (E,E)-8,10-Dodecadien-1-ol; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for the insect pheromone codlure, (E,E)-8,10-dodecadien-1-ol, on all raw agricultural commodities in accordance with the following prescribed conditions:

(a) Application shall be limited solely to codlure dispensers that conform to the following specifications:

(1) Commodity exposure must be limited to inadvertent physical contact. The design of the dispenser must be such as to preclude any exposure of its components to the raw agricultural commodity (RAC) or processed foods/feeds derived from the commodity due to its proximity to the RAC or as a result of its physical size. Dispensers must be of such size and construction that they are readily recognized post-application.

(2) The dispensers must be applied discretely, i.e., placed in the field in easily perceived distinct locations in a manner that does not prevent later retrieval. This exemption does not apply to codlure applied in a broadcast manner either to a crop field plot or to individual plants.

(b) A codlure dispenser is a single enclosed or semi-enclosed unit that releases codlure into the surrounding atmosphere via volatilization and is applied in a manner to provide discrete application (i.e., in easily perceived distinct locations in a manner that does not prevent later retrieval) of the codlure into the environment.

[59 FR 9931, Mar. 2, 1994]

§ 180.1127 - Biochemical pesticide plant floral volatile attractant compounds: cinnamaldehyde, cinnamyl alcohol, 4-methoxy cinnamaldehyde, 3-phenyl propanol, 4-methoxy phenethyl alcohol, indole, and 1,2,4-trimethoxybenzene; exemptions from the requirement of a tolerance.

Residues of the biochemical pesticide plant floral volatile attractant compounds: cinnamaldehyde, cinnamyl alcohol, 4-methoxy cinnamaldehyde, 3-phenyl propanol, 4-methoxy phenethyl alcohol, indole, and 1,2,4-trimethoxybenzene are exempt from the requirement of a tolerance in or on the following raw agricultural commodities: the following field crops—alfalfa, clover, cotton, dandelion, peanuts (including hay), rice, sorghum (milo), soybeans, sunflower, sweet potatoes, and wheat; the following vegetable crops—asparagus, beans (including forage hay), beets, carrots, celery, cole crops (cabbage, broccoli, brussels sprouts, cauliflower), collards (kale, mustard greens, turnip greens, kohlrabi), corn, fresh (field, sweet, pop, seed), corn fodder and forage, chinese cabbage, cowpeas, cucurbitis (cucumbers, squash, pumpkin), egg plant, endive (escarole), horseradish (radish, rutabagas, turnip roots), leafy greens (spinach, swiss chard), lettuce (head leaf), okra, parsley, parsnip, peas, peas with pods, peppers, potatoes, sugar beets, tomatoes; the following tree fruit, berry and nut crops—almonds, apples, apricots, berries (blackberry, boysenberry, dewberry, loganberry, raspberry), blueberry, cherry, citrus (grapefruit, kumquat, lemon, lime, orange, tangelo, and tangerine) cranberry, grapes, melons, (watermelon, honeydew, crenshaw, cantaloupe, casaba, persian), nectarines, pears, pecans, peaches, and strawberry as dispersed from the end-use product Corn Rootworm Bait ®, a pesticidal bait, in accordance with the prescribed conditions in paragraph (a) of this section.

(a) Cumulative yearly application cannot exceed 20 grams of each floral attractant/acre/application.

(b) [Reserved]

[59 FR 15857, Apr. 5, 1994]

§ 180.1128 - Bacillus amyloliquefaciens MBI600; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of the biofungicide Bacillus amyloliquefaciens MBI600 (antecedent Bacillus subtilis MBI600) in or on all food commodities, including residues resulting from post-harvest uses, when applied or used in accordance wi

[80 FR 78143, Dec. 16, 2015]

§ 180.1130 - N-(n-octyl)-2-pyrrolidone and N-(n-dodecyl)-2-pyrrolidone; exemptions from the requirement of a tolerance.

(a) N-(n-octyl)-2-pyrrolidone and N-(n-dodecyl)-2-pyrrolidone are exempt from the requirement of a tolerance when used as solvents in cotton defoliant formulations containing thidiazuron and diuron as active ingredients.

(b) N-(n-octyl)-2-pyrrolidone is exempt from the requirement of a tolerance when used as a solvent in formulations containing pyraflufen-ethyl as an active ingredient at a concentration not to exceed 20% by weight.

(c) N-(n-Octyl)-2-pyrrolidone is exempt from the requirement of a tolerance when used as a solvent in formulations containing prothioconazole as an active ingredient at a concentration not to exceed 15% by weight.

[79 FR 10682, Feb. 26, 2014, as amended at 88 FR 47778, July 25, 2023]

§ 180.1135 - Pasteuria penetrans; exemption from the requirement of a tolerance.

The biological nematicide Pasteuria penetrans is exempted from the requirement of a tolerance in or on all raw agricultural commodities, except roots and tubers, when used as a nematicide in the production of fruits and vegetables in greenhouses.

[59 FR 66741, Dec. 28, 1994]

§ 180.1139 - Sodium 5-nitroguaiacolate; exemption from the requirement of a tolerance.

The biochemical sodium 5-nitroguiacolate is exempted from the requirement of a tolerance when used as a plant growth regulator in end-use products at a concentration of 0.1% by weight and applied at an application rate of 20 g of a.i. per acre or less per application, in or on all food commodities.

[65 FR 66181, Nov. 3, 2000]

§ 180.1140 - Sodium o-nitrophenolate; exemption from the requirement of a tolerance.

The biochemical sodium o-nitrophenolate is exempted from the requirement of a tolerance when used as a plant growth regulator in end-use products at a concentration of 0.2% by weight and applied at an application rate of 20 g of a.i. per acre or less per application, in or on all food commodities.

[65 FR 66181, Nov. 3, 2000]

§ 180.1141 - Sodium p-nitrophenolate; exemption from the requirement of a tolerance.

The biochemical sodium p-nitrophenolate is exempted from the requirement of a tolerance when used as a plant growth regulator in end-use product at a concentration of 0.3% by weight and applied at an application rate of 20 g of a.i. per acre or less per application, in or on all food commodities.

[65 FR 66181, Nov. 3, 2000]

§ 180.1142 - 1,4-Dimethylnaphthalene; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for the residues of the plant growth regulator, 1,4-dimethylnaphthalene (1,4-DMN), when applied postharvest to all sprouting root, tuber, and bulb crops in accordance with good agricultural practices.

[77 FR 68697, Nov. 16, 2012]

§ 180.1143 - Methyl anthranilate; exemption from the requirement of a tolerance.

Residues of methyl anthranilate, a biochemical pesticide, are exempt from the requirement of a tolerance in or on all food commodities, when used in accordance with good agricultural practices.

[67 FR 51088, Aug. 7, 2002]

§ 180.1145 - Pseudomonas syringae; exemption from the requirement of a tolerance.

Pseudomonas syringae is exempted from the requirement of a tolerance on all raw agricultural commodities when applied postharvest according to good agricultural practices.

[60 FR 12703, Mar. 8, 1995]

§ 180.1146 - Beauveria bassiana Strain GHA; exemption from the requirement of a tolerance.

Beauveria bassiana Strain GHA is exempted from the requirement of a tolerance in or on all raw agricultural commodities when applied to growing crops according to good agricultural practices.

[60 FR 18547, Apr. 12, 1995]

§ 180.1148 - Occlusion Bodies of the Granulosis Virus of Cydia pomenella; tolerance exemption.

An exemption from the requirement of a tolerance is established for residues of the microbial pest control agent Occlusion Bodies of the Granulosis Virus of Cydia pomonella (codling moth) in or on all raw agricultural commodities.

[60 FR 42450, Aug. 16, 1995]

§ 180.1149 - Inclusion bodies of the multi-nuclear polyhedrosis virus of Anagrapha falcifera; exemption from the requirement of a tolerance.

The microbial pest control agent inclusion bodies of the multi-nuclear polyhedrosis virus of Anagrapha falcifera is exempted from the requirement of a tolerance in or on all raw agricultural commodities when used to control certain lepidopteran pest species.

[60 FR 37020, July 19, 1995]

§ 180.1150 - 6-Benzyladenine; exemption from the requirement of a tolerance.

The biochemical plant regulator 6-benzyladenine (6-BA) is exempt from the requirement of a tolerance in or on apple and pear when applied at a rate of ≤182 grams of active ingredient per acre per season, and in or on pistachio when applied at a rate of ≤60 grams of active ingredient per acre per season.

[72 FR 13179, Mar. 21, 2007]

§ 180.1153 - Lepidopteran pheromones; exemption from the requirement of a tolerance.

Lepidopteran pheromones that are naturally occurring compounds, or identical or substantially similar synthetic compounds, designated by an unbranched aliphatic chain (between 9 and 18 carbons) ending in an alcohol, aldehyde or acetate functional group and containing up to 3 double bonds in the aliphatic backbone, are exempt from the requirement of a tolerance in or on all raw agricultural commodities. This exemption only pertains to those situations when the pheromone is: Applied to growing crops at a rate not to exceed 150 grams active ingredient/acre/year in accordance with good agricultural practices; and applied as a post-harvest treatment to stored food commodities at a rate not to exceed 3.5 grams active ingredient/1,000 ft 2/year (equivalent to 150 grams active ingredient/acre/year) in accordance with good agricultural practices.

[71 FR 45399, Aug. 9, 2006]

§ 180.1156 - Cinnamaldehyde; exemption from the requirement of a tolerance.

Cinnamaldehyde (3-phenyl-2-propenal) is exempted from the requirement of a tolerance in or on all food commodities, when used as a fungicide, insecticide, and algaecide in accordance with good agricultual practices.

[64 FR 7804, Feb. 17, 1999; 64 FR 14099, Mar. 24, 1999]

§ 180.1157 - Cytokinins; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of cytokinins (specifically: aqueous extract of seaweed meal and kinetin) in or on all food commodities when used as plant regulators on plants, seeds, or cuttings and on all food commodities after harvest in accordance with good agricultural practices.

[64 FR 31505, June 11, 1999]

§ 180.1158 - Auxins; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance is established for residues of auxins (specifically: indole-3-acetic acid and indole-3-butyric acid) in or on all food commodities when used as plant regulators on plants, seeds, or cuttings and on all food commodities after harvest in accordance with good agricultural practices.

[64 FR 31505, June 11, 1999]

§ 180.1159 - Pelargonic acid; exemption from the requirement of tolerances.

(a) An exemption from the requirement of a tolerance is established for residues of pelargonic acid in or on all food commodities when used as a plant regulator on plants, seeds, or cuttings and on all food commodities after harvest in accordance with good agricultural practices.

(b) Pelargonic acid when used as an herbicide is exempt from the requirement of a tolerance on all plant food commodities provided that:

(1) Applications are not made directly to the food commodity except when used as a harvest aid or desiccant to: any root and tuber vegetable, bulb vegetable or cotton.

(2) When pelargonic acid is used as a harvest aid or desiccant, applications must be made no later than 24 hours prior to harvest.

(c) An exemption from the requirement of a tolerance is established for residues of pelargonic acid in or on all raw agricultural commodities and in processed commodities, when such residues result from the use of pelargonic acid as an antimicrobial treatment in solutions containing a diluted end-use concentration of pelargonic acid up to 170 ppm per application on food contact surfaces such as equipment, pipelines, tanks, vats, fillers, evaporators, pasteurizers and aseptic equipment in restaurants, food service operations, dairies, breweries, wineries, beverage and food processing plants.

[62 FR 28364, May 23, 1997, as amended at 64 FR 31505, June 11, 1999; 68 FR 7935, Feb. 19, 2003]

§ 180.1160 - Jojoba oil; exemption from the requirement of a tolerance.

The insecticide and spray tank adjuvant jojoba oil is exempted from the requirement of a tolerance in or on all raw agricultural commodities when applied at the rate of 1.0% or less of the final spray in accordance with good agricultural practices, provided the jojoba oil does not contain simmondsin, simmondsin-2-ferulate, and related conjugated organonitriles including demethyl simmondsin and didemethylsimmondsin.

[61 FR 2121, Jan. 25, 1996]

§ 180.1161 - Clarified hydrophobic extract of neem oil; exemption from the requirement of a tolerance.

Clarified hydrophobic extract of neem oil is exempt from the requirement of a tolerance on all food commodities when used as a botanical fungicide/insecticide/miticide.

[67 FR 43552, June 28, 2002]

§ 180.1162 - Acrylate polymers and copolymers; exemption from the requirement of a tolerance.

(a) Acrylate polymers and copolymers are exempt from the requirement of a tolerance when used as inert ingredients in pesticidal formulations applied to growing, raw agricultural commodities. This tolerance exemption covers the acrylate polymers/copolymers that are intrinsically safe and already listed in TSCA inventory or will meet the polymer tolerance exemption from requirements of premanufacturing notification under 40 CFR 723.250. Polymers exempted can be used as dispensers, resins, fibers, and beads, as long as the fibers, beads and resins particle sizes are greater than 10 microns and insoluble in water. This exemption pertains to the acrylate polymers/copolymers used as inert ingredients for sprayable and dispenser pesticide formulations that are applied on food crops. Any acrylate polymers/copolymers used for encapsulating material must be cleared as an inert ingredient when used in pesticide formulation applied on food crops.

(b) For the purposes of this exemption, acrylate polymers/copolymers used as inert ingredients in an end-use formulation must meet the definition for a polymer as given in 40 CFR 723.250(b), are not automatically excluded by 40 723.250(d), and meet the tolerance exemption criteria in 40 CFR 723.250(e)(1), 40 CFR 723.250 (e)(2) or 40 CFR 723.250(e)(3). Therefore, acrylate polymers and copolymers that are already listed in the TSCA inventory or will meet the polymer tolerance exemption under 40 CFR 723.250 as amended on March 29, 1995 are covered by this exemption.

[61 FR 6551, Feb. 21, 1996]

§ 180.1163 - Killed Myrothecium verrucaria; exemption from the requirement of a tolerance.

Killed Myrothecium verrucaria is exempted from the requirement of a tolerance in or on all raw agricultural commodities when applied as a pre-seed or pre- or post-planting soil treatment alone or mixed with water and the mixed suspension be applied through drip or border irrigation systems and the indicator mycotoxin levels do not exceed 15 ppm.

[61 FR 11315, Mar. 20, 1996, as amended at 61 FR 58332, Nov. 14, 1996]

§ 180.1165 - Capsaicin; exemption from the requirement of a tolerance.

Capsaicin is exempt from the requirement of a tolerance in or on all food commodities when used in accordance with approved label rates and good agricultural practice.

[63 FR 39521, July 23, 1998]

§ 180.1167 - Allyl isothiocyanate as a component of food grade oil of mustard; exemption from the requirement of a tolerance.

The insecticide and repellent Allyl isothiocyanate is exempt from the requirement of a tolerance for residues when used as a component of food grade oil of mustard, in or on all raw agricultural commodities, when applied according to approved labeling.

[61 FR 24894, May 17, 1996]

§ 180.1176 - Sodium bicarbonate; exemption from the requirement of a tolerance.

The biochemical pesticide sodium bicarbonate is exempted from the requirement of a tolerance in or on all raw agricultural commodities when applied as a fungicide or post-harvest fungicide in accordance with good agricultural practices.

[61 FR 67473, Dec. 23, 1996]

§ 180.1177 - Potassium bicarbonate; exemption from the requirement of a tolerance.

The biochemical pesticide potassium bicarbonate is exempted from the requirement of a tolerance in or on all raw agricultural commodities when applied as a fungicide or post-harvest fungicide in accordance with good agricultural practices.

[61 FR 67473, Dec. 23, 1996]

§ 180.1178 - Formic acid; exemption from the requirement of a tolerance.

The pesticide formic acid is exempted from the requirement of a tolerance in or on honey and honeycomb when used to control tracheal mites and suppress varroa mites in bee colonies, and applied in accordance with label use directions.

[74 FR 26535, June 3, 2009]

§ 180.1179 - Plant extract derived from Opuntia lindheimeri, Quercus falcata, Rhus aromatica, and Rhizophoria mangle; exemption from the requirement of a tolerance.

The biochemical pesticide plant extract derived from Opuntia lindheimeri, Quercus falcata, Rhus aromatica, and Rhizophoria mangle is exempted from the requirement of a tolerance in or on all raw agricultural commodities when applied as a nematicide/plant regulator in accordance with good agricultural practices.

[62 FR 24842, May 7, 1997]

§ 180.1180 - Kaolin; exemption from the requirement of a tolerance.

Kaolin is exempted from the requirement of a tolerance for residues when used on or in food commodities to aid in the control of insects, fungi, and bacteria (food/feed use).

[81 FR 34907, June 1, 2016]

§ 180.1181 - Bacillus cereus strain BPO1; exemption from the requirement of a tolerance.

An exemption from the requirement of a tolerance for residues of the Bacillus cereus strain BPO1 in or on all raw agricultural commodities when applied/used in accordance with label directions.

[67 FR 70017, Nov. 20, 2002]